The newest TL515U firmware

I have the 32TL515U and updated the firmware to v2.2.2 when I purchased the unit about in Dec 2011. Last year v2.2.3 was released on-line for download, when I did a manual check for new firmware through the TV, it said no new version was available. I didn't install 2.2.3 because it said it was only to fix an issue with Cisco routers, which I don't have. Now the TV does say there is a new firmware, but wont show the version unless you install it. Is it still the 2.2.3, or is a newer version that the TV sees to download, but just isnt listed on-line yet?

Wow I have knew had it lockup to where I've had to unplug it. I have had one serious issue with the TV when I used the hdmi cable from my PC video card to the TV and switch to the input for my PC (I have it set to hdmi 3). When I switch to play a game in 3D this graphically glitched bar starts from the bottom and climbs quickly up to the top. It looks like random colour flicking all through it and when it reaches to the top and covers the whole screen, it then clears back to normal and then starts up again from the bottom. Only way I've been able to fix this is to turn the TV off, back on and then switch it back to 3D packet mode and it seems to work then.
I've also seen it have about a 2 inch wide bar from the top to the bottom of the screen that is white and then screen flickers for a second and then shows the PC picture. It was also saying the resolution was 9x2492 or some crazy wacked number and then after the flicker, it then shows the proper 1080p resolution at the top label.
I wish someone would make some custom firmwares for this TV, when I had my Phillips DVD player, a guy was making some kick ass firmware changes, it changed a lot of things for the good. I'll maybe see if he is still doing this and take a stab at this firmware here.
BTW, I also use a colorimeter to calibrate my TV, so I have all the white levels calibrated for a perfect picture (or the best I'm going to get with this on-par TV panel). I highly recommend others to get one, they are not that expensive. If you want some info on what I use, I can set you up with all the details on where to get the stuff needed and you can get it for around $250. This also includes PROFESSIONAL calibration software and is easy to use.

Similar Messages

We bought a time capsule then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now?

We bought a time capsule, 1TB, then the wifi has a problem since it does not identify the existing wireless network and it says that its need to have an update firmware. The existing firmware is 7.3.1, does it have an newest update firmware existing now? Does APPLE do not provide latest firmware for this item?

How old is that Time Capsule? The fact that it still have firmware 7.3.1 suggests that it's not the latest model. The latest firmware available for my two-year-old model is version 7.5.2. Apple does provide firmware updates. You just have to let the Time Capsule download and install them. Use AirPort Utility to do that.
Regarding your Wi-Fi problem, please explain what you mean by "it does not identify the existing wireless network".
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

HT201413 I am running Windows 7, ITUNES 10.6.3.25. I am unable to see my Iphone/sync my iphone in Itunes. I have uninstalled all components of Itunes and downloaded the newest version to no avail. Please help.....Thanks

I am running Windows 7, ITUNES 10.6.3.25. I am unable to see my Iphone/sync my iphone in Itunes. I have uninstalled all components of Itunes and downloaded the newest version to no avail. Please help.....Thanks
I am attaching the Diagnostics data below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron N7010
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0016AA9C0126E318
Current user is not an administrator.
The current local date and time is 2012-07-05 11:42:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod (5th generation) running firmware version 1.3
Serial Number: 8L643QK9V9R
iPhone 4 (CDMA) running firmware version 5.1.1
Serial Number: C8RG57F0DDP8
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.

I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

Does newest N80 firmware fix T9 dictionary bug?

My N80 firmware has been updated already twice in my local service point (Finland) for the same reason: in some phase of usage it stops saving new words to dictionary.
When writing SMS and entering a new word, it remembers that new word during the same message writing. When opening a new message to write, the word is no longer in use (not included in dictionary's suggestions).
First firmware update didn't fix the problem - I keep thinking because I restored a full backup from memory card - maybe restored also faulty dictionary file?? Don't know is that a file that is includes in full backup.
Second update: I didn't restore anything and "teached" the new words all over again. Now the dictionary has stopped working again!
I checked my current firmware: 4.0623.0.41 (build 26-07-2006)
Ran software update availability check: available version 4.0623.0.42 (build 20-09-2006).
I really wonder why my local service point hasn't put the newest firmware for me, think this new version has been out ages ago (yes, I do realise that build date is different that release date). These firmware re-installations (because the version hasn't changed from the version which was on the phone when I bought it on April 07) have both been done after May 2007.
Now, the question is, if I go to the service point, should they have this version 4.0623.0.42 available to my phone? The second time (in June) when I asked the newest possible version, this .41 was installed again - so can someone from Finland confirm if this new .42 has delivered to service points? Hate to go nagging there if they really don't have it
And more importantly, (and to this I like to hear the answer from Nokia personnel or from users who have been experiencing same problem) will this firmware version fix this problem? Either
a) keeps saving words
or
b) gives a proper error if saving is not possible for reason X
In my case it could not have been "not enough memory/free space"-error, because I have plenty of free space in both, phone and memory card. So if the error comes for some other reason, like to know why.
And no, I won't try to update firmware by my self. I tried it once and my phone died So no trust from me to that service.

I don't believe her claim unless it was true and valid up until the N95. I pass through Wales an awful lot during my work day and therefore I have many many Welsh town and place names entered into my T9 dictionary, along with other words I have added and the few custom smilies I added to it, it has to have way more than 30 words in it.
I'm aware of a bug that resets the T9 dictionary every now and then. The word file gets overwritten every so often and your words disappear. Never did find out what caused it but it affected the 6680. Perhaps this could be the problem.
Useful links: Phone firmware update | Nokia support site

Q?... i deleted the most recent firmware update, and now this...

the streaming feature of my quicktime program is non-functional, all i get is the
Q? icon. it seamed to correlate to my trashing the newest firmware update.
any tips on how i can fix the Q?... ?
MacBook 13.3 Black Mac OS X (10.4.9)

Check your streaming options in the QT MIME Settings.
Also, make sure you have the latest versions of Adobe Flash Player Software.
If the above does not work, please advise which browser & version you are using?

Is it safe to update to the newest firmw

Ok, so my Zen MicroPhoto got broken beyond recovery (the famous "Hardware Problem"-problem) and Creative Belgium is going to send me a new one/fix my old one.... When I receive my repaired/replaced mp3 player, is it safe for me to apply the latest firmware update or not? On my broken one, I did not do anything wrong, just run the firmware programme, and all of a sudden the player was dead. I don't want to break my repaired/replaced one too.

Had i to guess, i'd say your replacement unit will probably have the newest firmware installed, but i could be wrong. Lots of people have had no issues with the updates(me included, but i waited a year to pull the trigger) but lots have. Things to verif before doing the upgrade:
Make sure your pc is in good shape, turn off virus scan and malware scans for the duration of the upgrade.
makesure the usb connection to the player is straight to your pc, not through a hub, keyboard, monitor, etc, and make sure the cable is good.
I formatted my player before and after the upgrade.
I also made sure no other usb devices were acti've at the time of the upgrade.
turn off your screen saver and shut off power saving
if you have are updating from a laptop, plug it in.
HTH
--chris

What is the newest PA version for IPC?

Dear expert,
What is the newest PA version for IPC? Thanks!!
BR~
Hedy

I have the exact same problem.
My printer is an OfficeJet 6500 E709a Series.
The current version of firmware on my printer is MJP1FN0907AR. To me, the downloaded firmware version,
"MJP1FN0935AR" (dated 30 Oct 2009)
looks like a later version than the current installed version,
"MJP1FN0907AR".
And nowhere do I see the date of the current installed firmware version.
Come on, HP. This problem is years old. Figure it out already. Either:
(a) Tell us that our hunch is correct, that the higher-numbered firmware version is newer, so we can override the warning. Also fix the Firmware Download Utility so it stops giving this false warning.
or,
(b) Tell us that the higher-numbered firmware version is actually older.
Whichever version is later, also do the following:
(c) To eliminate ambiguity, post the firmware date wherever the firmware version is displayed: on Printer Status Report, web admin page for printer, and HP Diagnostic Tool for starters.
(d) Since any table of versions and dates is doomed to itself go out of date (as new versions are released), also publish a rule or pattern we can use to know which of two versions is the more recent. And follow that rule!
TIA,
- Don

Is the new ipod firmware update the cause of them freezing?

the frimware update for the ipod turned my 2 day old video into a paper weight. yesterday when i plugged my ipod in, itunes asked me to download the newest itunes, so i did. then, immediately, after downloading itunes urges me to udate the ipod firmware. i hadnt gotten used to the o.s that was already on my new ipod so i postponed the update. i uploaded 200 songs, 5 music videos, and superman, worked beautifully. today i plugged it in to my pc and itunes urged me to update the firmware again, so i did. everything went smooth, i unplugged it and saw no indicator saying to plug it in to my wall charger, so i didnt, an hour later i plugged Giada (my ipod) back in to upload some ebooks, the "do not disconnect" screen frozeimmidiately my pc would not recognize it neither would itunes, ive been at it for hours and nothing has changed. ive tried Giada in three other computers its the same with all of them. it works otherwise, listening to music, but while plugged into my pc its a peice of metal.
does anybody know whats up, and how to fix it?

So, Godmorning from Sweden
After hours of scanning diffrent forums i found a method which worked for me, you can put the G5 Video in "Disk Mode" by first
1. Reboot (Key lock, Key unlock, Menu+Middle several seconds, 6-10sec)
2. Press Middle+Play just when the reboot starts.
This enables Diskmode, to exit diskmode just do a standard reboot.
When my Ipod enterd "disk mode" i could access it with iTunes and did a factory reset, and "for the moment" my problem is solved.
I hope this tip helps people....

Firefox updated to its newest version 12.0. Now my Adobe Flash plugin freezes and hangs every website when it is enabled even though it is the newest version.

Today Firefox updated to its newest version 12.0. Immediately after update, I couldn't load most websites. The web browser would just freeze. I have determined that the culprit is the Adobe Flash Plugin, however; even with the newest version of the plugin, I am still having problems. Any suggestions?

can you try this suggestion [https://support.mozilla.org/en-US/kb/Managing%20the%20Flash%20plugin#w_playing-flash-videos-makes-firefox-hang] and/or [[How do I upgrade my graphics drivers?]]

I have the newest version of itunes 11.1.3.8. I have one song that i want moved from itunes to my iphone WITHOUT erasing my iphone playlists which happens each time i sync. please help

I have the newest version of itunes 11.1.3.8. I have uploaded a CD into my itunes library. I would like to add one song only to my iphone. I have created playlists on my iphone and each time I sync all of my iphone playlists get erased and I have to recreated them. after the sixth time, I am very hesitant to do any kind of syncing. Is there a way to just move one song without syncing? I have read some posts that talk about this but have not been able to do it. For example, the "summary tab" does not exist on my version of itunes. I tried drag and drop on itunes as explained in their help section but that did not move the song to my iphone. Please help

You are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.

TS1967 After 'updating' the newest iTunes version, I cannot sync my iPod Nano! It does not show up anymore.

After 'updating' the newest iTunes version, I cannot sync my iPod Nano! The 'old' version recognized and showed in icon to sync, but the newest version does not. Is there a way to sync the older iPods?

http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

I've just bought an new laptop and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now I have no music or apps on my phone. The contacts photos and texts all seem fine. Just the itues stuff that's missing.

I have just bought a new computer and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now have no music or apps on the phone. Contacts, texts, photos all fine. Just all itunes content that is missiing. It isn't showing in my itunes account on my computer or on my phone. Any idea how to get it back? (No point synching with itunes on my computer as it isn't there either!)

I suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one.

I have a currently updated Mac that's fast as lightning. I use eBay A LOT. In the newest version when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guys

Hello,
I have a Mac that's fast as lightning running on the latest version of OS X. I use eBay A LOT. In the newest version of Firefox that I just downloaded when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guys

Thank you for your kind words on the Tablet, as this is the only product mentioned that is supported on this forum, The forums here are for Home Electronics and Computers, and do not reach the Sony smart phone community.
The Sony smart phone Support Forum is the place for Sony (formerly Sony Ericsson) users from around the world to get help and help others:
your very in depth suggestions and comments would best be heard at the following forum that is dedicated exclusively to the Sony smart phone community.
http://talk.sonyericsson.com/community/support

Problems with the NEW V50 Firmware

Hi all... my nokia 5800 faces some problems here after upgrading to the new V50 firmware, not sure whether have u all encountered it before...
1. Sometimes when typing SMS, the cursor will keep moving backwards and hang there (sounding tut tut tut... continuously and unstoppable)
2. Sometimes the vibration on touching the screen will suddenly become stronger than normal, like suddenly Zeeek, zek, zek rather than normal zek, zek, zek~
I am not sure whther it is common in V50 firmware or it happens only to my specific phone.
Please help !!! Thanks~

A hard reset is needed to clean everything out on your phone. In fact, it is best to do a hard reset BEFORE any firmware update. This is because of possible inconsistencies with system files our own usage may have made. Installation of apps also has an effect, as they create their own system files which are set to be compatible to that of older firmware. New files and new system files coming with the newer firmware adding new features everywhere (this one, v50, in fact from my understanding affects display and icon system files due to the kinetic scrolling in icon menu) may have caused incompatibilities with certain apps. Also one must take into consideration orphaned files caused by installation and uninstallation of apps.
All of these possible incompatibilities may exist on both phone or memory card which both contains system files. First thing, try to run a disk check on the memory card, if nothing happens, you format. If nothing still happens, you reinstall the fw into the phone. If nothing still happens, you put a formatted card and format the phone and reinstall.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

What do i need to connect my mac book pro to the tv with the thunderbolt on the mac to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks

Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody

The newest TL515U firmware

Similar Messages

Maybe you are looking for