The Next Firmware for E70 will come soon :)

i just want to know how everyone can predict
when The Next Firmware for E70 will come
as i know,
2.06 is LESS quality audio (i guess..)
rather than previous version (1.06)
i hope that will more improvement audio quality
in the next firmware for E70
let's say for firmware 3.x
any idea for firmware improvement issues ?...

*#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
*#7370# - Reformat your phone
This you perform as a last resort. Nothing else is working. Turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

  • The next firmware for n73?

    So who knows when the next firmware for n73 comes out? so I can update my phone? my current firmware is v4.0839.42.2.1.
    Generally it takes 3 months to build a new version of firmware, and this one was build 27-09-2008 . so I hope that the new firmware comes very soon .
    Thanks

    *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
    Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list.
    *#7370# - Reformat your phone
    This you perform as a last resort. Nothing else is working. Turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
    re-flash - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen.
    If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service.
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • When will new update (firmware) for E72 will come?

    when will new update (firmware) for E72 will come?

    Firmware update for E72 has already been released..
    v22.007 has been around for many European models since around January
    v23.002 has been around for Asian/Middle-East models since this February.
    Some operator-branded phones may not have available updates yet though.
    You can use the Device Software Update page (search for the links in Nokia website) and enter your product code to find out if your product code has been included in the firmware updates already. 

  • The next firmware for N97

    Nokia, I know you guys read this blog about the biggest disappointment in the History of Nokia (the N97). I want an exact release date of the next firmware and exact list of what is being done.. I cannot stand this RAM and C drive issues on this device.. I am using my n95-3 because N97 is not stable, not capable of multitasking, etc etc etc etc etc etc etc! I will soon trash it and record a video, or smash it on the wall.. The feeling of Smashing this phone on a wall well worths the 700$. Only reason I am not doing it because I am hoping The next firmware will give me at least 70mb free ram on boot and will clean up C drive from unwanted apps (adobe, jouki, boingo etc............. And therefore will give me at least 50mb free C!) P L E A S E list here nokia what is being worked on so i don't waste my time and totally switch back to my n95-3.

    phatdumi wrote:
    2bad wrote:
    <quote>
    The main problem for me is connectivity, I always have to re start the phone when I leave the house otherwise it will keep searching for my WLAN 20 miles away
    </quote>
    I wish people wouldn't blame the poor phone, when they don't read the manual properly. TURN OFF WLAN AUTO SCAN for goodness sake. Set the "default" access point in "WEB" to "Ask when needed", then choose whatever access point you want when you use the thing after you've left the house.
    Jeez!
    Message Edited by 2bad on 26-Jul-2009 05:22 PM
    This is my interpratation of this problem.
    (Connectivity>Destinations> Access Points) This is where you set up access to the internet and you prioritise your available connections i.e I have WLAN Priority1 and Orange Internet Priority 2 setup under an access point called INTERNET, I have therefore made this access point called INTERNET my default access point therefore I expect the phone to automatically connect to Orange Internet when my WLAN is out of range because Orange Internet is available everywhere I go. Isn't this what this feature is meant to be doing???????????????????????
      Hey 2bad am I right or am I wrong?
    Message Edited by phatdumi on 27-Jul-2009 04:04 PM
    Hit Kudos if I Helped out.
    Nokia 3310-> 8810->N95->N95 8Gb->
    Nokia N97 Black v21.0.045 RM-505 Code-0585162 (handset No 3)

  • Anybody know when the next Navy 0% promotion will come out?

    Hi all, Anyone know when the next 0% apr, or even 1.99% apr will come out?

    There has been no announcement about a new iphone. 
    From the terms of use of this forum:
    "do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products."
    Also, ALL U.S. iphones are carrier locked and cannot be unlocked.
    Apple has released a new iphone model each and every year in or around late June in the past.

  • Is there any chance that the next update for iBooks will include the ability to highlight?

    It's great as it is though, just the highlighting part. I just don't really want to use other apps for my books and PDF files (cause I'm lazy like that and I'm saving my space for other apps); especially e-books I use for school.

    Nobody in these forums represents Apple, so you can't get any answer to your question here.  To let Apple know about new features you want, use
    http://www.apple.com/feedback

  • HT204053 I recently changed ny Apple ID but it did not transfer over to my iCloud account. How do I change my iCloud ID? The login popup for iCloud will not go away so I cannot get into my iPad since it pops up as soon as I turn the device on.

    I recently changed my Apple ID but it did not transfer over to my iCloud account. How do I change my iCloud ID? The password for the new Apple ID does not work since the iCloud default user name is imbedded in the login box. The login popup for iCloud will not go away so I cannot get into my iPad since it pops up as soon as I turn the device on and re-occurs every few seconds.

    You have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPad on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iPad when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Apple pls look here: Some "quick wins" for the next firmware release

    Hi!
    First of all: Thank you, Apple, for Update 1.0.3! The most annoying bugs are fixed and the click wheel works better (but in my opinion the quick wheel of the iPod nano works still even better).
    Please allow me to suggest a few "quick wins" you could easily (in my opinion) include in the next firmware release:
    + Please add an option to turn off that "screensaver" or to change the time until it turns on
    The "screensaver" wouldn't be that bad when:
    + It would display "now playing" information in a large font (better readable than the normal "now playing" when the background light is off
    + The screensaver clock would display 24h format, when configured
    Best regards, Jens

    It's a waste of time posting this here because it's a user to user forum and no-one from Apple (except maybe the forum moderators) will see it.
    Please use this link.
    iPod Feedback.

  • Great Firmware for E70 from the E61i?

    Hello!
    After wining an E61i recently and comparing the performance to my E70 I noted that the E61i software handles the memory far-far better than my E70 with the 3.x firmware. (The E61i had more than 20 MB free system memory after 2 days, while my E70 can get down to 11-12 MB in one day.)
    As I noticed previously that the Firmware numbers of the E70 and the E61 for the 3.x firmware have been identical - sending the message that the firmware for the two phones are identical - I started to wonder, whether the firmware of the E61i would also run on the E70 especially because it is closer hardware wise than the E61 (without the i).
    It would be great if Nokia would just release the same firmware for the E70 which they have now on the E61i.
    I have had a discussion with Nokia Care, and here is the most relevant part:
    "I was aware of the fact you wrote in your answer, that each phone has their own firmware updates. Acctually this was the very reason why I contacted you, to request from you to release the same firmware software awailable for the E61i also for the E70 so I would be able to upload it on my E70. If the firmware software for the E61i would be able to run on the E70 also, than it is only a matter of making the same software availableto be uploaded on the E70. That is what I am asking for.
    I am happy to see that in your latest answer you do not claim any more that the E61i firmware would not run on the E70 but you only say, that it is not possible to upload that firmware on the E70. That is great news for
    me, as it hints that it might just work fine on the E70 also if You make that exact same software available for the E70.
    That is what I have been asking for.
    I hope this clarifies my point, so could you please check with the E-series phone developers whether the firmware of the E61i would run on my E70? And so if it does, please release it for the E70 also!"
    Nokia Care could not advise in this matter and they sent me here.
    How should we proceed from here?
    Best Regards!
    Aron

    I forgot to mention that I love my E70 and would like to unlock it to full potential by better memory handling.
    The memory handling of the E61i is fantastic!
    If they would not say that it is without FP1 I would belive it is an FP1 device...

  • My firefox Freezes randomly! I'll be working on the website for 2, 5 or 15 minutes. Then i'll click in the page to get to the next page, and it will just freeze! I already tried removing the "preloading" feature, so why does this keep happening?

    My firefox Freezes randomly! I'll be working on the website for 15 minutes, (google places, yahoo mail). Then i'll click in the page to get to the next page, and it will just freeze! I already tried removing the "preloading" feature, so why doesn't this keep happening?
    My firefox at home, (version 3) does not have this happen! I'm afraid of upgrading to version 3 because of all these problems. I use FireFox for work so i really need it and I'm wasting crucial time restarting websites and updating my websites/blog/business listings from scratch. not right!
    I also notice it happens a lot to Harley Davidson website.

    freezing at regular intervals:
    :http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    : https://addons.mozilla.org/firefox/addon/places-maintenance/
    :<br>Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions. (Firefox 8 --Nov 8, 2011-- should not have this particular problem).

  • When is the next firmware coming for the N97

    When is the next frimware due for the N97, V20 made it easier to use with kinectic scrolling, apart from that, it has made my phone slower, unresponsive, freezes alot, and caused more bugs innit.
    Is there another one coming out to maybe fix the rest of the bugs since V20 is suppose to fix some bugs not all of them, what about the rest of them.

    There was an announcement by xbungle in the "software updates" section that the next update for the N97 would be released mid to late next month.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How do I obtain the next number for a Primary Key using an ADF View Object?

    I have two separate View Objects (A & B) for the same Entity Object. View Object A does a SELECT on all of the fields in the table. This View Object is where I execute my adds and updates. View Object B is only used to retrieve the next number for the primary key. This is done so that when I add a row to the database, I always get the max number of the primary key and add one to it. I accomplished this by setting the SQL mode to Expert and using the SQL: "SELECT MAX(NBR) AS MAX_NUMBER FROM TABLE_1". This may be overkill having a seperate View Object for this, but so far this is the only way I have found to obtain the next number. However, I have discovered that this way does not always work.
    The problem I'm running into is when I try to add multiple records to View Object A without committing the transaction between each add. Because View Object B is disconnected from View Object A, the MAX_NUMBER of View Object B comes back with the same number for each add I do on View Object A. So I know I must retrieve the MAX_NUMBER from View Object A.
    I've tried using the following code in my Table1ViewImpl class:
    this.setQuery("SELECT MAX(Table1.NBR) AS MAX_NUMBER FROM TABLE_1 Table1");
    this.executeQuery();
    The view object now has what I want, but I have yet to figure a way to extract the MAX_NUMBER out of the View Object. I've also looked into using the method addDynamicAttribute() but I can't figure out any way to set the attribute with the MAX_NUMBER.
    I can't be the only one trying to retrieve the next number from a database table using ADF. Can anyone help me with this? FYI - I'm using JDev 10.1.3 EA.

    You missing the point.
    On a multi-user db knowing the next highest number doesn't guarantee the number will be available when it comes time to commit the record. You can prove this to yourself by opening two instances of your app and do whatever you do to add a new record to your VO. Both will assume the same number, and when you commit an error will be generated
    You must use sequences to avoid the possibility of duplicate keys. If you are trying to avoid gaps in your numbering then you need to convince yourself why this is necessary.

  • Over the next few weeks I will travelling in Mexico and driving in Mexico, how well does the ipad Mpa program run down there and does the device incur any additional charges ?

    Over the next few weeks we will be travelling in Mexico and hoefully using the iPad Maps for driving instructions etc. Does anyone have any experience with this feature? What can of challenges will we face?

    How to turn your computer into a Virtual (Personal)Router.
    Our hotel the Grand Oasis Cancun provided internet for only 36 hours and you could only use it on one device which comes to my next option as using your Laptop as a Personal Router to broadcast WiFi to any devices near your computer. Our room was on the Second level of the Pyramid at Grand Oasis and I was able to access it while at the VIP lounge below our room. Before our supposedly free internet service ended.
    I attempted using the hotel next door since I was getting a good signal from the Omni Hotel. They offered complimentary 24hr internet access using your browser as a way to track your use. Once you find the signal of the Omni it will open your browser I used Google Chrome, after it opens you go threw a few simple steps and your ready.
    I learned that after the 24 hours are up all you have to do is disconnect from their network, just run Ccleaner(free program) then find the Signal of the hotel and you will be given another 24 hours. What Ccleaner(<--download there) does is clears anything attached to your browser ie cookies temp files etc. it cleans your browser history giving you a way of not paying for the hotel fee of internet and giving you free WiFi. this is only if you are next to the Omni hotel :).
    What you need to download to turn your computer into a hotspot need to say is this little easy to use program Virtual Router. Once it has download test at your home to make sure it works with you devices. This will work with Tablets, Phones and other computers that cant find the Omni WiFi signal. Your welcome. To use it, is simple. Open program>make a password>select WiFi and start VR.

  • The NEXT firmware update? 1.2.1

    anyone know when Apple will release the next firmware update? got my phone for like a month now (i did 1.1.1) and all these safari crashes, bad password timer.. and like soo many bugs.
    and yeah anyone know how to Empty trash in Mail? or you are just suppose to delete it twice? I did the option clear mail after one day but it never delete anything after like a week.. and yeah i guess that's a bug too.
    so when's the Next fireware update?
    1.2.1? 1.1.2? how does the number work?

    hbueain wrote:
    no, i don't use Mail on computer..
    and.. i use Gmail.
    just saying they should add a empty trash option, or at least make the "Delete after 1 day" work.
    It does work. Deletion takes place based on 24 hours after the initial deletion was initiated by the user.
    Go to:
    Settings > Mail > (mail account name) > Advanced > Remove >
    select either
    (Never/After one day/After one week/After one month
    Your mail will be deleted automatically based on the selection. No more having to delete an email twice.
    Good Luck!

  • What is the current firmware for iphone 3g?

    What is the current firmware for iphone 3g?

    Dear Genes....    wjosten   /   Templeton Peck,
                             My iPhone 3G is on iOS 4.0.(8A293) and with Firmware  05.13.04. Since few days when I shifted  to New operator VODAFONE, I am troubling with "NO SERVICE" most of the time, but when I checked my SIM in another Mobile, it is working fine. So please tell me which iOS do i need to switch to and what will be my Firmware. As I own iPhone 3G, moving to iOS 4.2.1 is very slow.
    Please do suggest. Itz a lil Urgent.
    Looking Ahead to hear from you.
    Thanks in Advance....

Maybe you are looking for

  • Connector lightning to 30 pin

    from iphone 5 (lightning) to 30 pin. to charge my old ipod from iphone 5 charger

  • WIKI server upgrade 10.7 to 10.x lost calendar.

    Just pulled the trigger and updated my MacMini server that was running 10.7.x to Yosemite 10.x. After the upgrade I checked and a WIKI that has been active for close to 1/yr is not %100. The base page, images, and documents are there but the calendar

  • Reports for PO and IV

    Hi SRM Experts, I am using SRM 4.0 ECS Scenario. 1-I want to see all the POs made in a certain Period for a certain Company codes. 2-Also same for the IVs done in the period, 3-IV paid in the period so that I can compare all these. Is there any repor

  • Oracle hyperion epma server not starting in hyperion 11.1.2.4

    I have installed Hyperion 11.1.2.4 on windows 2008. All the services are running fine except Oracle hyperion epma server. I have tried reinstalling/reconfiguring but nothing is working.When I start the service, I get the message - The Oracle EPMA Ser

  • Accessing directories of ical server

    Hello I'm trying to get a CRM program to interact with the ICAL server, and hope to be able to write and read directly from the directories containing the information. So in theory drop a webcal object in, read a webcal object out. However.. even as