The next page will right move in my smartforms

hi all:
I met a strange problem, there is just one page in my smartforms, page1 point to itself. so the expecting result is all page are same.
but the problem is the second page will right move a little, maybe that's a configure problem?
thanks
li zhong

Hi,
Try copying the first page into a second page and check if the problem persists.
If the problem persists then it is the device type issue assigned with the printer.
Also please check with LOCL or any other printer if the same problem exists.
Regards,
Ram

Similar Messages

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1"

I'm writing a report and need a title page, so I want the auto-numbering to start with the second page. So the title page is zero and the next page will read "1" How do I do this?

Hi H4S,
Click at the end of the Tile page.
Menu > Insert > Section Break.
Click in the second Section. Insert a page number in the Header or Footer.
Inspector > Layout > Section:
Regards,
Ian.

In MS Word, it is possible to prevent tables from breaking at page breaks. So, if a table, when populated with data gets too big for the spae allotted on one page, the table will move in its entirety, to the next page. Can this be done in "Pages"?

I am trying to figure out ow to prevent tables from breaking along a row when there is a page break in "Pages". This is done in MS Word by going under Table properties under "Rows". I have a document with small three row tables and I want to keep the tables together and move to the next page in its entirety when there is a page break. Help!

The table that I don't want to break between rows looks like this, except it fits the width of the page:
quilt name
picture of quilt
source
Size: XX; Difficulty Level: 3
I inserted a Inline Text box into the document, copied the table inside the text box, then pasted it through the document (which lists quilting projects). When the table spans a page break, even when in an inline text box, the picture which is in the right hand column splits, as well as the information pertaining to the particular quilt.
Jerry - thank you for your help. I tried to give you a "solved my problem" rating, but I am adjusting to the Mac slowly after 20+ years on a PC.

Why is it that when I go to Yahoo mail, I can't delete any messages or move to the next page? Stays stuck on page 1..

Lately, when I log on to my yahoo mail while using firefox, it no longer shows the DELETE option at the top of the email page. So, I cannot delete any emails that I might wish to delete. Also, I cannot get past the first page of my emails. Every time I click on the NEXT PAGE button, it does not move from page 1. This does not happen when I log onto yahoo mail using Internet Explorer. Please advise as to what I can do to correct this. Could it be that I'm not using the latest version of Firefox? I don't know...

Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

How to move floats to the next page?

Hi All,
Can anyone help me on this?
How to move floats to the next page the same position?
Thanks in advance

@Learner – you can duplicate the object to the next page and remove the original.
If the original one is anchored you also have to account for its position, because duplicating an anchored object will move it.
Here an example for duplicating a selected object to the same page.
//DuplicateAnchoredObject_SELECTION_SNIPPET.jsx
//Uwe Laubender
* @@@BUILDINFO@@@ DuplicateAnchoredObject_SELECTION_SNIPPET.jsx !Version! Fri Apr 12 2013 07:53:31 GMT+0200
var sel = app.selection[0];
var x = sel.geometricBounds[1];
var y = sel.geometricBounds[0];
//The duplicate() method without an optional argument:
var dup = sel.duplicate();
//NOW: the duplicated objects is at the inner border of the page
//To move it to its original position we need the following:
var xd = dup.geometricBounds[1];
var yd = dup.geometricBounds[0];
dup.move(undefined,[x-xd,y-yd]);
That snippet can be enhanced for duplicating to a certain page, because the duplicate() methods can take arguments like "Page", "Layer", "Spread" etc. For details see the DOM documentation at:
http://www.jongware.com/idjshelp.html
One caution here: to make that work the way you want with facing pages, you have to take into account, that your coordinate system must be changed to "per page" by the property "RulerOrigin" of the ViewPreferences.
This said, here is a working example for duplicating a selected object to page 3 of the current document:
//DuplicateAnchoredObject_TO-DIFFERENT-PAGE_SELECTION_SNIPPET.jsx
//Uwe Laubender
* @@@BUILDINFO@@@ DuplicateAnchoredObject_TO-DIFFERENT-PAGE_SELECTION_SNIPPET.jsx !Version! Tue May 14 2013 10:11:29 GMT+0200
var d=app.documents[0];
var oldRulerOrigin = d.viewPreferences.rulerOrigin;
var sel = app.selection[0];
var x = sel.geometricBounds[1];
var y = sel.geometricBounds[0];
//In case of facing pages we change the ruler origin:
d.viewPreferences.rulerOrigin = RulerOrigin.PAGE_ORIGIN;
//Duplication of selected object:
var dup = sel.duplicate(d.pages[2]);
//NOW: the duplicated objects is at the inner border of the page
//To move it to its original position we need the following:
var xd = dup.geometricBounds[1];
var yd = dup.geometricBounds[0];
dup.move(undefined,[x-xd,y-yd]);
//Restore the original ruler origin:
d.viewPreferences.rulerOrigin = oldRulerOrigin;
Of course, thiese snippets are working also with not anchored objects…
Uwe

My firefox Freezes randomly! I'll be working on the website for 2, 5 or 15 minutes. Then i'll click in the page to get to the next page, and it will just freeze! I already tried removing the "preloading" feature, so why does this keep happening?

My firefox Freezes randomly! I'll be working on the website for 15 minutes, (google places, yahoo mail). Then i'll click in the page to get to the next page, and it will just freeze! I already tried removing the "preloading" feature, so why doesn't this keep happening?
My firefox at home, (version 3) does not have this happen! I'm afraid of upgrading to version 3 because of all these problems. I use FireFox for work so i really need it and I'm wasting crucial time restarting websites and updating my websites/blog/business listings from scratch. not right!
I also notice it happens a lot to Harley Davidson website.

freezing at regular intervals:
:http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
: https://addons.mozilla.org/firefox/addon/places-maintenance/
:<br>Install add-on, run at least the option mentioned in the article, I ran them all. When finished you can uninstall the extension, all without taking taking Firefox down, The extension is one of the new JetPack extensions. (Firefox 8 --Nov 8, 2011-- should not have this particular problem).

How do you create a login page using dashcode for the iPhone's mobile safari that will transfer you to the next page?

     Hey I have created a login page in Dashcode for a mobile safari app (aka iphone web app) and I am having trouble since I can not find any useful info about multiple pages. I don't want to use a stack layout view because it is only a login page and I need to check with a database to make sure the user's login info is correct. Right now I have it set up so that it loads another iphone web app project once it validates the info.
     The only problem with this is I am having a good bit of trouble trying to pass values from my php code to javascript or html. For some reason calling the javascript inside the php code makes the actual code inside the app not be called and same with the echo statment for the html.
So I would like to be able to create the app in this way:
Login page > PHP > MS SQL > PHP > UNKNOWN (if I can't get the javascript or html to output both) > Secure info on the next page
     I believe It would be a lot easier if I had the option for a multiple page but instead I am having to load up an entirely new dashcode project. If anyone knows a better way please let me know. Or if anyone knows a link to good information on passing values from php to javascript, because I couldn't get any of the code I tried to work, I would really appreciate it.

Addendum to previous reply:
OK. This is weird--but I should be used to that, and just grateful that it seems to work (for now).
What I had done is FTPd some image files to my site using Filezilla, but when I had tried to access them, I was unsuccessful. I am almost sure that I used the same url (and variations of it) as you suggested, namely,  http://mysite.verizon.net/username/filename , and it either did not work, or gave me the "Page under construction", or, in some cases asked me for my username and password.
But, when I did it this time, it worked. So I probably had something off, but I can now do what I want.
By the way, if you'll permit another question, while on the site-builder site, it said that there was a "Web Photo Manager", and said that "To download the Web Photo Manager: Open the Site Builder application and go to the All My Sites page. Click on the Web Photo Manager link (listed under Advanced Building Tools )." I can't find it--would you happen to know where it is?
In any case, thanks a lot for all your help--it solved my problem.

How can I turn off inherent features of Firefox? (Specifically, it automatically loads and displays the next page, but it will load OVER the current page)

With this version of Firefox, it automatically loads the 'next' page. When I'm reading blogs, when I click to go back, it automatically loads the first page of the blog as the 'next' page I want to go to. However, it will load this page OVER the page I am on, so that I cannot see it. With some blogs, it is so extreme, I cannot use Firefox on them at all. This isn't an add-on or anything, and I cannot find it in the preferences panel. Can I turn it off somehow/is there a way to in Firefox 4?

That is not standard behavior. You may have installed an extension that causes it.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Overset text will not go into the text box that is part of the master for the next page

I am trying to (first time user) set up a simple trade-paperback sized book with some photos. Have set up several masters for chapter title pages, chapter inner pages, etc. When I copy text out of Word into InDesign, (copy/paste) the text overset box appears. I load it, then go to the next page, which I have already formatted using one of the masters. But when I select the desired text box ((Ctrl/shft) and click, the overset text forms a new text box, What am I doing wrong? thanks

I have done, this did work right for at least the left side of the spread, but never for the right side -
Make sure the left and right page master page text frames are threaded View>Extras>Show Text Threads. Here I have left and right page text boxes threaded on my A-master spread:
Checking Smart Text Reflow can make adding long text to master frames easier:
With Smart Text Reflow enabled I've released the master page text box on page 1, note the released frame has a solid border, while the unreleased master page frames on subsequent pages are dotted indicating they are still master page items and not page items.
The result of the paste:

Problems when trying to move a paragraph with a heading to the next page

When i try to move a paragraph with a heading (generally style 2) to the next page by pressing the enter key, rather than the whole paragraph moving to the top of the next page it moves to pretty well every where but the top. i have attached a video because im sure what i have said doesn't make much sense.
http://www.youtube.com/watch?v=MrlnsmLIDGk&feature=youtubegdataplayer
i have talked to an apple technician through apple care and we came to the conclusion after reseting iwork to default settings still with no changes all i could do was completely remove iwork from my computer and try to start over. Or come to the forums to see if there is a work around.

Hi Jared,
Without commentary, or other explanation, it's difficult to determine what actions you are taking to produce the results in the video.
In the first instance, it appears that you have placed the insertion point at the beginning of the line following the header, then pressed and held return. this action pushes that line (and anything below it) down until it crosses the page boundary and jumps to a second page. That's expected behaviour.
At approximately 0:57, you have deleted the return characters, returning the first and second lines after the header to a position immediately following the header. The insertion point is then moved to the point at the beginning of the header line, and returns are inserted as before. About 1:04, a number of unreadable alert boxes appear. At 1:07, the second line below the heading moves to the second page, followed by the first line, then by the heading itself at about 1:10. Again this is expected behaviour.
Only after that are there any 'odd' behaviours, and without knowing what actions you are taking to produce those oddities, it's (at least) difficult to say what is causing the results you see.
Regards,
Barry

Why can't I use the left/right arrow keys to go to the next page or back a page?

When reading manga, I used to be able to go to the next page or go back a page using the left and right arrow keys. Doesn't work anymore, how can I fix that?

Such a feature can only be added by an extension.
Maybe:
*NextPlease!: https://addons.mozilla.org/firefox/addon/nextplease/

HT4623 ios 7 download on iphone 4 stuck at rescue email. Can only go back, will not go on to the next page.

Please help! ios 7 download on iphone 4 stuck at rescue email. Can only go back, will not go on to the next page.

That makes no sense . Can you take a screenshot and show me? hold home button and power for about 2 sec then on computer import the photo (http://support.apple.com/kb/ht4083) and upload it here. Have you restarted the iphone yet?

HT4059 The last three books I have downloaded at the bottom of the page the bottom parts of y,g,and j are appearing at the top of the next page. Any help or suggestions will be appreciated.

This problem just started. On the last line of each page if the letters y,g,p or j appear in the line the bottom part of each of these letters appears at the top of the next page while being chopped off the actual line it should appear in.

*Update*
I thought I had found the offending 'app' namely "Songpop."
I regularly use "Songpop" on my phone late at night via my wifi connection.
All enteries on my phonebill are at midnight (even though I have a data allowance it was excluded from allowance). I switched 3G off on Friday, played "Songpop" at midnight and at the exact time I got a "Server Error" message.
I posted a message on the "Songpop" support forum.At first they said this was a problem relating to my ISP.
I have spoken to my ISP and asked if there are connection drops at the time I have been billed (ie to establish if my wifi dropped and 3G kicked in without my knowledge) and have been advised that there aren't any connection drops at that time.
"Songpop" have now responded that "This is an issue to take up with Apple Support" see: http://support.songpop.fm/songpop/topics/playing_songpop_on_phone_via_wifi_but_i ncurring_download_data_charges_for_3g_useage?utm_content=topic_link&utm_medium=e mail&utm_source=reply_notification
Hopefully someone at Apple can respond ....

Firefox will load the web site but will not let you see the next page but I can on Internet Explorer

When I go to wth.org jobs on firefox the first page of jobs come up but there is still 5 more pages of jobs to see. when i click the next page firefox says the page cannot be displayed. I can go to Internet Explorer and look at all the pages. what is the problem please?

I'm not sure that I understand what you mean.<br />
The two images at the top are animated GIF images.<br />
What do you mean with: ''FireFox is automatically swapping toward other " http://www.free.fr" home page'' ?
Do you mean that Firefox goes by itself to the www.free.fr if you open the leschamoisvolants.free.fr site ?

Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

Pages '09 v4.1
Problem 1:
     I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
     However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
     On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
     Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
Problem 2:
     Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
So there you have it. Christmas is over and its back to work. Thank-you for your attention.

Regards re-positioning a table:
I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before - the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
Page 1 left side.
TEXT 1-line as 1-column
TABLE (5-rows)
TEXT (2-columns) 14-lines left column and 13-lines right column.
[Layout Break] otherwise the above textual columns would be all on the left side of the page.
TEXT 1-line as 1-column
* The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
Page 2 right side.
A 2-page table flowing or breaking into a 3rd page.
Page 3 left side.
The overflow of the subject table.
[Layout Break]
[Section Break]
Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

The next page will right move in my smartforms

Similar Messages

Maybe you are looking for