The next screen's audio starts playing when the current screens audio has finished
So I've added audio to a few screens and on the first couple it works fine. I have added a mute button and that's all, I just want the audio to play to the end then stop on each screen. It does that perfectly on the first few screens and then at a certain point, when the audio for that screen has finished, it plays the audio for the next screen, and the next, and so on even though I haven't moved on. I can't work out why it's doing this! Sure someone can explain what I've done wrong. Using Captivate 8.0.1...
I adjusted them on one screen and it worked - you've solved my problem again - Thank you!
Is there a way I can make my audio files load up like this automatically?
Similar Messages
-
I bought an album, two of the twelve songs play about half the way through, then stop, and then the next song in line starts playing. How do I get the songs downloaded so they play to the end?
Welcome to the Apple Community.
Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app (or video app) on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer. -
My computer tells me I purchased Rod Stewart's Christmas album. I DID NOT. How do I get iTunes to cancel the purchase. Also, this thing has suddenly started playing when I turn on my computer. How do I make it stop?
It is probably too late to cancel it, but contact the iTunes store support staff at http://www.apple.com/emea/support/itunes/contact.html and see what they can do for you.
-
IPod on iPhone 4 starts playing when switching between apps
My iPhone 4's iPod starts playing when I switch between apps, it goes on and off
Not sure if this is the deal or not, when I click on my ipod app it's playing a song, I can't here any music but the pause button is showing, is it playing and running down the battery.. BTW I never seem to have earphones around to see if it's playing, however I have sync in my car and it is playing when I switch to aux..
Thanks for any help and I hope I'm not stepping on your positing. sorry if I am.. -
When I start play memories (4.0.01) "Browser has stopped working" appears in a popup overlaying the
PlayMemories Home. Popup also requests you close the program, making this version of PlayMemories
unuseable! Prior versions worked. I am running a current version of Windows 7 ultimate.Hi jkrad4130,
The My Pictures folder is the defautl folder where the software gets all the files from so you can view and edit them. If you want to add other folders containing your media files from earlier imports, just click on File, Add folders and select the folder you want the software to manage. I would also suggest backing up your files to another device, if you have any.
If my post answers your question, please mark it as "Accept as Solution". Thanks_Mitch -
Error "The current garbage collector has no nursery"
Has anybody any information on the error message "The current garbage collector has no nursery"? We received the following error message after starting the WLS in production mode:
<2006-jan-25 kl 17:57 CET> <Error> <Management> <BEA-140001> <An error occurred while getting attribute TotalNurserySize on MBean se-i-ld09:Location=se-i-ld09-c01-s01,Name=se-i-ld09-c01-s01,ServerRuntime=se-i-ld09-c01-s01,Type=JRockitRuntime. Method: public long weblogic.t3.srvr.JRockitRuntime.getTotalNurserySize(). Exception: com.bea.jvm.NotAvailableException: The current garbage collector has no nursery..
com.bea.jvm.NotAvailableException: The current garbage collector has no nursery.
at jrockit.management.jvm.GarbageCollectorImpl.getNurserySize()J(Unknown Source)
at weblogic.t3.srvr.JRockitRuntime.getTotalNurserySize()J(JRockitRuntime.java:112)
at jrockit.reflect.NativeMethodInvoker.invoke0(Ljava.lang.Object;ILjava.lang.Object;[Ljava.lang.Object&)Ljava.lang.Object;(Unknown Source)
at jrockit.reflect.NativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object&)Ljava.lang.Object;(Optimized Method)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object&)Ljava.lang.Object;(Optimized Method)
at java.lang.reflect.Method.invoke(Ljava.lang.Object;[Ljava.lang.Object;I)Ljava.lang.Object;(Optimized Method)
at weblogic.management.internal.DynamicMBeanImpl.getAttribute(Ljava.lang.String&)Ljava.lang.Object;(DynamicMBeanImpl.java:574)
at com.sun.management.jmx.MBeanServerImpl.getAttribute(Ljava.lang.Object;Ljava.lang.String&)Ljava.lang.Object;(MBeanServerImpl.java:1183)
at com.sun.management.jmx.MBeanServerImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String&)Ljava.lang.Object;(MBeanServerImpl.java:1153)
at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(Ljavax.management.ObjectName;Ljava.lang.String&)Ljava.lang.Object;(RemoteMBeanServerImpl.java:287)
at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(ILweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundResponse;Ljava.lang.Object&)Lweblogic.rmi.spi.OutboundResponse;(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(Lweblogic.rmi.extensions.server.RuntimeMethodDescriptor;Lweblogic.rmi.spi.InboundRequest;Lweblogic.rmi.spi.OutboundResponse&)V(BasicServerRef.java:477)
at weblogic.rmi.internal.BasicServerRef$1.run()Ljava.lang.Object;(BasicServerRef.java:420)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedExceptionAction&)Ljava.lang.Object;(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedExceptionAction&)Ljava.lang.Object;(SecurityManager.java:144)
at weblogic.rmi.internal.BasicServerRef.handleRequest(Lweblogic.rmi.spi.InboundRequest&)V(BasicServerRef.java:415)
at weblogic.rmi.internal.BasicExecuteRequest.execute(Lweblogic.kernel.ExecuteThread&)V(BasicExecuteRequest.java:30)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest&)V(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:178)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread&)V(Unknown Source)>
Thanks in advance for your help - it is much appreciated!
Cheers, JonasThis exception is thrown by the JRockit Management API when querying the nursery size of a GC that has no nursery (single-generational GC). The logical place to catch the error would be in the weblogic.t3.srvr.JRockitRuntime.getTotalNurserySize() method, which implies that it is a WLS issue.
Maybe it has been fixed in a later WLS 8.1 service pack?
If you run with a generational GC, i.e. "-Xgc:gencon" the error will go away, but that has larger implications on the behavior of your app so it should not be used as a workaround. -
The current user username has not been granted the ADVISOR privilege despite having it !
Hi,
I'm trying to follow ML note 2499931.1 'Using Dbms_Advisor.Tune_Mview To Optimize Materialized Views For Fast Refresh' and am receiving an error suggesting the user4 does Not have the Advisor privilege
despite the fact that it does. What am I missing ?
Every note I've found so far suggests granting the privilege is the fix.
I have and continue to receive the error.
Version 11.2.0.3 on Redhat 5
select * from dba_sys_privs where grantee = 'SOAUSER';
GRANTEE PRIVILEGE ADM
SOAUSER CREATE MATERIALIZED VIEW NO
SOAUSER CREATE VIEW NO
SOAUSER CREATE PUBLIC SYNONYM NO
SOAUSER SELECT ANY DICTIONARY NO
SOAUSER ON COMMIT REFRESH NO
SOAUSER CREATE ANY DIRECTORY NO
SOAUSER CREATE DATABASE LINK NO
SOAUSER SELECT ANY TABLE NO
SOAUSER ADVISOR NO
SOAUSER UNLIMITED TABLESPACE NO
SOAUSER CREATE SESSION NO
Error at line 2
ORA-13616: The current user SOAUSER has not been granted the ADVISOR privilege.
ORA-06512: at "SYS.PRVT_ADVISOR", line 4869
ORA-06512: at "SYS.DBMS_ADVISOR", line 1969
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 490
ORA-06512: at "SYS.PRVT_TUNE_MVIEW", line 970
ORA-06512: at "SYS.DBMS_ADVISOR", line 739
ORA-06512: at line 3
Thanks in Advance
KenSorry, but the code I was receiving the error message for is essentially the same as the example in the note. Assumed people would have access to the note.
The statement is:
variable foo varchar2(20);
declare foo varchar2(20) := 'ken_foo';
begin
dbms_advisor.tune_mview(:foo,
'create materialized view ken_foo
as
select
papf.rowid R_papf,
paaf.rowid R_paaf,
gcc.rowid R_gcc,
papf.employee_number,
gcc.segment4 cost_center
from hr.per_all_people_f@atc_pp_to_ebs_atcllc papf,
hr.per_all_assignments_f@atc_pp_to_ebs_atcllc paaf,
gl.gl_code_combinations@atc_pp_to_ebs_atcllc gcc
where papf.person_id = paaf.person_id
--and trunc(sysdate) between papf.effective_start_date and papf.effective_end_date
--and trunc(sysdate) between paaf.effective_start_date and paaf.effective_end_date
and paaf.default_code_comb_id = gcc.code_combination_id');
end;
Per another forum the answer appears to be that sys didn’t have the advisor privilege.
Granted advisor to sys and ran the statement again as soauser and no error.
Thanks
Ken -
The current responsibility context has been switched to message
Hi,
I'm trying to suppress the message "The current responsibility context has been switched to:" in my custom OAF page.
I have tried the solutions mentioned in the below threads , but its not resolved. I'm new to OAF and cannot be sure if I've done everything that is necessary.
Message "The Current Responsibility Context Has Been Switched To:XXXXX"
Re: Responsibility Context Region
Can anyone please guide me through this issue?
Thanks
-MadhuriHi Shreevat,
I did go through the metalink document you suggested. But it wasn't the appropriate solution for our issue. I used the solution suggested in another thread in this forum and it worked.
This is the thread for anyone's future reference as well:
Re: Responsibility Context Region
FYI,
I added a new VO which fetched the list of responsibilities for the user that was logged in and assigned the first responsibility from that list explicitly.
Below are the specific lines of code added in CO.processRequest which worked
pageContext.removeParameter("OARespContextSwitcherValuesKey");
pageContext.removeTransactionTransientValue("OARespContextSwitcherValuesKey");
pageContext.changeResponsibility(SupervisorResp,RespAppl);
Thanks for all your help.
-Madhuri -
IPod starts playing when I unplug something from the headphone jack
Greetings,
I use Internet radio apps like Pandora and Live365. Often, when I stop the app and unplug the audio cable or earbuds, the iPod app will start playing the very first song (alphabetically speaking) in its library. At full volume, no less. So, I have to quickly hit the iPod button to bring it up, and then hit stop.
It doesn't happen every time, and I can't figure out if there is a particular sequence of events that triggers it, or if it's just random. Anyone else experience this?
Thanks,
DM
Message was edited by: DoctormelodiousDue to various hardware issues, I'm on my 4th phone.
Each and every one has displayed this same "unplug and spill one's audio secrets" behavior, usually with incredibly annoying, embarrassing (I have weird, rather personal music tastes, never mind my preference in Podcasts), and potentially battery-draining results (if I leave the phone on my desk and attend a meeting for, say, an hour).
I've "reset" the phone/s (for this and other reasons) and this "feature" of the iPod turning on when I unplug the ear buds has persisted.
I have third-party earbuds (but it happened during all the time I used the Apple ear buds, too). They're the "Ultimate Ears MetroFi 200v" set; they sound great, but the "talk" button is not nearly as cleverly placed as with Apple's (it's too low-- near my belly-button-- and it also protrudes considerably).
The catch-22 for me is that if I just wrap my earbuds around the phone and shove it in my pocket, the button will activate at some point, and I'll find that the iPod has been playing for an hour... if I just yank the buds out (like I WANT to, and ought to be able to), the iPod starts playing, usually at the the loudest volume (leftover from whatever onion-chopping or laundry-folding activity saw me last listening to the phone out loud).
So, it's a bad feature. No option (that I can see) to disable it. A glitch? From Apple? C'mon... all FOUR of my phones have been otherwise perfect, lol...
Sorry for the long rant wherein I didn't even suggest any possible fixes. I'm just glad to have found others experiencing this problem, and glad that I am not the only one who hasn't found a solution.
-Chris H. -
After transferring my iTunes data from my old to the new windowsPC following exactly the original apple instructions everything LOOKS allright when I start iTunes on my new PC. But when I click the song as usual, it doesn't start playing, although the little loudspeaker symbol on the left side appears. What went wrong, what can I do?
I guess nobody knows if the crash that occured was legitimate or not? Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.
-
ITunes automatically starts playing when I get in my car
I drive a Ford with Sync. I have my iPhone 3GS set to automatically connect to the bluetooth in the car when the car is started. In the past few weeks, I noticed my iTunes was automatically starting when it connected with the Bluetooth. It doesn't play through the car, so I don't know its happening unless I look at the phone and see iTunes playing music.
Is there a way to stop it from doing that? Its draining my battery.I too have this problem, though not with bluetooth. For me the auto-play starts as soon as I connect my iPhone 4S to the radio with a cable I connect to the AV 1/8" port in the center console of my 2007 Honda Accord. Not only does it start auto-playing as soon as I connect the cable, it also immediately starts playing the first music file in my phone as soon as whatever podcast I am listening to has ended
Like others, I find this really annoying, but also a little dangerous. Because some engineer thought that auto-playing the first music file on a device was what most people would want to have happen, I now have to either (1) think ahead to select and pause my podcast or song prior to connecting the cable, or (2) scramble around to stop the auto-playing file while I am driving. This is hampered by the fact that the auto=play does not instantiate Music when it auto-plays, so I have to locate and start up Music and go to Now Playing before I can stop the file from playing.
I do not believe, however, that this is Apple's fault. On no other device anywhere does this auto-play occur except in my Accord. On the other hand, I see people in this thread with the same problem driving cars other than the Accord. This could just be something I need to work around. A bummer, but definitely a First World problem. -
Nano doesn't automatically start playing when connected to docking station
I have a Philips CD/Radio/ipod player that is compatible with my nano. My husband has the a nano (same generation) and when he connects his to the docking station, it automatically starts playing. He can use the controls on the machine vs on the nano. I can only start playing mine by clicking the play button on my nano.
I've gone through both of our nano's to see if there is a difference in settings and I can't find anything that's different.
Please help...it's really annoying.So once you start it, can you then use the controls?
So what does it play when he plugs it in? It seems like he must be pre-selecting something to play, so maybe it's already in progress when he plugs in, and you are not doing that. Put some of his music in your iTunes and tell him to make it work - watch what he does very carefully
Does the ipod player say anything in the manual about more than one iPod or automatic playing? -
For some reason my Ipod seems to turn itself on and start playing music by itself. I have been sleeping only to be woken up in the middle of the night from music coming from my Ipod. It seems to be playing music from a playlist but it does not always use the same playlist.
Has anyonr else had this problem? Is it a software or hardware problem? How can I fix this?
ThanksYou most likely have an alarm set.
To check go to extras/clock/alarm and set it to off. Check the calendar also, extras/calendar/alarm. -
Lumia 920 starts playing when paused
Hi group,
Since the only way to stop playing music and podcasts is with pause i assume its supposed to stay paused until you press play again? But my player on Lumia 920 start playing every time i hang up a call, wery annoying, any good advice to stop that?
//Fredrichi mate,
as this is behaviour specific to the Windows Phone 8 platform, you will need to leave feedback over with Microsoft: http://windowsphone.uservoice.com -
May i know what is Plugin-container,exe and why it need internet access ? noticed that it starts only when visit any website has flash containt on webpage . is this adobe flash player plugin ? is it safe to use ?
See http://kb.mozillazine.org/Plugin-container_and_out-of-process_plugins
Maybe you are looking for
-
BAPI_SALESORDER_CREATEFROMDAT2 for creating sales orders with configurable
Hi All, I want to create sales order with a material which in turn triggers a configurable network order. I am using the following BAPI : BAPI_SALESORDER_CREATEFROMDAT2. After reading the "[Variant Configuration (LO-VC)|http://help.sap.com/printdocu/
-
Message on startup: The disk you inserted was not readable
Every time I start my computer I get a message: The disk you inserted was not readable by this computer. I've tried a number of things to stop it, no success. Anyone know how to fix this?
-
MacBook Pro and Drive genius 2
I'e got a late 2009 17" MacBook Pro. When I try to boot from the Drive Genius DVD the computer just reset it self. When I restart the computer and press the C key it sounds if the computer is reading the disc. The screen goes black and the computer r
-
ISight camera exposure time control for astrophotography
Does anyone know of a way, or an application that allows you to control the shutter speed/exposure time when taking a photo with an external iSight camera? I am trying to adapt an external iSight camera for astro-photography. There are some excellen
-
Hi there. I need to hide SSID from broadcast from Cisco Prime. I can do this easily on WLC by un-checking 'broadcast' under SSID on WLC but I have controller which I only have access through Cisco Prime. So I would like to find out how I can disabl