The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6

The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
Hi There,
The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
 Context where exception was caught:
Func:
CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
Application   : C:\Program Files\National Instruments\MAX\NIMax.exe
User Name     : slaney
OS Version    : 5.1.2600 (Service Pack 3)
Exception Code: C000001E
Exception Addr: 457BC448
Return Address: 457BC448
Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
Module Name   : FieldPoint71
Parameters    : F001008E 7800FDDD C5100DFC EC0107EA
Source File   : (not available)
Return Address: 481000C3
Function Name : (not available)
Module Name   : (not available)
Parameters    : 00000000 00000000 00000000 00000000
Source File   : (not available) 

Hi,
I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
Let me know.
DirkW

Similar Messages

  • MAX error, niGPIBsys.dll plug-in caused an exception

    Trying to connect to hardware via the local network to send ASCII strings. I can ping the static IP address successfully, but can't get anything from it in LabVIEW.
    VISA resource at the moment is TCPIP0::xxx.xxx.xxx.xxx::INSTR, which I think is right.
    MAX returns this error on startup:
    The niGPIBsys.dll plug-in caused an exception in the CmxSysExpertManager::FinalizeExpert function in the NIMax process.
    See these files for details:
    C:\ProgramData\National Instruments\MAX\Logs\20130709_091257-NIMax-00001848.log
    C:\ProgramData\National Instruments\MAX\Logs\20130709_091257-NIMax-00001848.dmp
    Then won't make new devices.
    VISA and 488 have both been reinstalled, and the nearest error I could find was number 6 here:
    http://digital.ni.com/public.nsf/allkb/6CA56E2DDBCCA06086257591006141EE?OpenDocument
    ... but PAE is definitely not enabled.
    Thanks in advance for any suggestion.
    (LabVIEW version 11.0 32-bit, windows 7, hardware is a Votsch Industrial Oven with static IP address)

    Sorry, I'm confused myself.
    LabVIEW communication with one instrument works when I manually entered TCPIP0::xxx.xxx.xxx.xxx::INSTR, so over the local network. It also worked when I connected it to my computer with a USB cable because the USB::<something> option came up in the drop down list of the VISA resource name panel straight away.
    With the other instrument, it has both USB and ethernet sockets, I couldn't get a response using the same TCPIP format as above, even though I know the IP address (and I tried all combinations of w/ wout/ INSTR) and I could ping it. Haven't been able to plug it into anything with USB directly as I can't get a computer near it at the moment. Tried LabVIEW's VISA serial read write example programme... does that not make sense then? I got error -1073807343.
    So I tried to use MAX according to tutorials and encountered the above problems. I suspect the MAX problem is seperate to my VISA connection problems. Can MAX not be used to find and configure connections both USB (is this the same as GPIB?) and TCPIP?

  • What is causing a disk error when saving psd files or writing to cache?

    The problem only happens when running Photoshop CC (2104) and Bridge (actually these are the only two programs I really use my external drive for) during a save or write operation to an external hard drive.  I can work for hours, with multiple files open, saving, creating, etc. without a problem and then suddenly I'll get a message from Photoshop saying, "Could not save .... because of a disk error." or from Bridge saying, ".. unable to write to cache..".
    When I quit and try to troubleshoot the problem, I find that, for some reason, Mavericks has put system files on my external (non boot) drive or, for whatever reason, thinks there is a system file on it.  Consequently, the drive cannot  be ejected (Error message: "... one or more programs may be using it...") and I cannot repair it using Disk Utility (Error message: " ... live file system repair is not supported").  I also cannot write to it (Error message: "... unexpected disk error has occurred (error code: -50)").  The problem persists even after quitting all other programs, which wouldn't surprise me if Mavericks thinks there is a system file on it.
    I have force ejected the drive a couple of times but became concerned that I might be compounding the problem. Now I just restart my computer and run Disk Utility Repair Disk.  (Don't know which is worse.)  Disk Utility either doesn't find a problem or, if it finds one, it repairs it.  After that, Photoshop and Bridge work fine for a while.
    System information:
    MacBook Pro 13" 2.4GHz with 16GB RAM, 500 GB HD (recently upgraded)
    Apple Cinema Display
    Mavericks (up to date)
    G-Technology G-Drive (Gen 5) 2TB HD connected via Firewire 800 (latest firmware)
    Unconfirmed observation: I believe the first few times this problem occurred, Firefox was up an running.  I made a point of quitting all programs except System Monitor when running Photoshop and Bridge and I can't remember having the problem again.  The the last time the issue occurred, today, however, Safari was up and running.
    Is this an OS problem, a hardware (disk drive, cable, etc.) problem, a software problem (PS, Bridge) or some combination? I have put this much detail in the post hoping someone can share some insight into the cause.  I will be sending this report to Apple and G-Technology and I will report any resolution, if and, hopefully when, I find one.

    The only thing that will cause a disk error is an actual error from the disk.
    Photoshop is just telling you what that OS told it about the error.
    It sounds like you need to boot off another disk and try to repair your disk.
    Also, make sure you have a backup. And check the SMART status to see if it is failing and needs to be replaced.

  • Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?

    When you save a file that's what options offers application
    05 мая 2014 г., в 13:40, Jacob Bugge <[email protected]> написал(а):
    sage go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click theStop Email Notifications link.

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will give me the highest quality to begin with,allowing me to make crops and still preserve the quality.
    thank you
    dovid

    It's the level of compression. Lower number, more aggressive compression, more visual artifacts.
    Aside from that you should never use jpeg as a working format. The compression is destructive and cumulative, and the file deteriorates every time you resave it.
    Use TIFF or PSD, and if you need jpeg save out a copy as a single final step.

  • In the process of saving a file a power surge rebooted computer. Any chance of recovering file?

    In the process of saving a file a power surge rebooted computer. Any chance of recovering file?

    Have a look at the sample script below. The "while" loop waits for the specified number of milliseconds, then reads the contents of a directory and processes every individual file in the directory. In my example, it just prints the file path to the console. You would replace this part with your Open / Save as / Move sequence.
    For more file system commands, refer to Adobe's Javascript Tools Guide, "File object functions".
    var stop = false;
    while( stop==false ) {
        // Wait for 20.000 ms
        $.sleep(20000);
        var fld = new Folder("c:/incoming");
        var filesInFld = fld.getFiles("*.fm");
        for(var f=0; f < filesInFld.length; f++) {
            // process the individual file
            $.writeln(filesInFld[f]);
        // Exit the  loop after 19:00
        var time = new Date();
        if( time.getHours() > 19 ) stop = true;

  • When saving a file i don't see the progress

    When saving Numbers files I use to see the progress of the save.  I no longer see its progress.  The files are being saved.  Any reason why this is happening??
    tj

    I'm on OS X 10.7, your profile says you're on 10.6.8, so i can't duplicate what you are seeing. If I was to guess, I'd say it is related to changes made for Lion where versions are  periodically saved automatically in the background, where you wouldn't want a progress window always popping up. "Save" has become "Save a Version" and, though I hadn't noticed, probably also does not pop up a progress window..

  • When saving certain files get the error "Error saving file..."

    When saving certain files get the error "Error saving file..." Seems to have trouble saving the temp files. tried dumping my workspace and prefs. No change. Other files work fine.

    Try deleting the iPod Photo Cache folder.  For its locations see:
    iTunes: Understanding the iPod Photo Cache folder

  • My late 2010 MBP is having a noise on the upper left hand side while starting up. is that from the internal fans or the HDD? is it cause for worry? am i going to lose the comp or the data?

    there is a noise from the upper left side of the machine at the time of starting up? is that from the HDD or the motherboard fan or the processor fan? recently my 3.5 year old HP laptop crashed and it was only later that i came to know that the heating issues had led to the motherboard being affected. i want to avoid such problems with my MBP.
    i would be grateful if some one could reassure me as to the probabilities of the problem which i am facing from the machine. the noise mentioned above is mostly at start up but at times also at the time of running of the machine though more intermittently so.

    Are you still under warranty? If so, call Apple and report the problem and get a case number. If you do have a hardware problem, a case number will document that it originally occurred under warranty, and Apple will honor your warranty until the problem is fixed.
    You can also run the extended version of the Apple Hardware Test. It will be on one of the grey system discs that originally came with your computer. On your model, it may also be possible to boot to it by holding down "D" as you boot up. If the AHT detects a hardware problem with your fan or hard drive, you will get an error code.
    Alternatively, if you have access to an Apple Store, you can make an appointment at the genius bar and have a hardware test run.
    There is also a utility you can run which will give a good check on the physical health of your hard drive:
    http://www.volitans-software.com/smart_utility.php
    SMART Utility seems to be a bit more critical than Disk Utility, and may be able to detect impending drive failure sooner. You can download the demo and run it several times for free.
    Also, here's a link where you can listen to failing hard drive sounds:
    http://datacent.com/hard_drive_sounds.php
    If you do have a hardware problem, a hardware test should detect it. If it's a fan, you want to replace it ASAP. If it's one of two, wouldn't hurt to replace both of them.
    If the hardware tests don't show anything, you may have some other problem like maybe a bit of trash or debris caught up in your fan which is making noise. It wouldn't hurt to keep tabs on your fans with something like iStatPro.
    Good luck!

  • When saving a File OS Is Creating Multiple Folders With The Same File Name

    Not sure what I changed but, now when I save a any file (ppt. word, Keynote,Pages e.g.,) to the desktop or any other location the OS will also create multiple file folders with the same file name as the file I'm saving. Inside the folders are what appears to be files locating the saved files. What can I do to fix this problem?
    I'm using the 10.7.2 version
    MacBook Pro

    Misio wrote:
    It looks like a finder bug. To replicate, I surf to any website, I right-click on a jpg image, select "Save Image As" and in the window that pops up I type in the filename "000.jpg", I select the folder Pictures, and click on Save.
    BTW, I don't know why, but the file was saved only as "000" without the file extension ".jpg". Does anybody know why?
    the extension is simply hidden. go to the get info panel for the file and uncheck the option to hide the extension.
    Then I surf to another image, and again I save it as "000.jpg" and now it asks me if I want to replace the existing filename, although the existing one is "000" and I try to save as "000.jpg", so I say yes, and then magically the file is saved with the full filename including the extension "000.jpg"
    When I did it a couple of times, always saving image as "000.jpg" from various sources, I ended up with two distinct files named "000" and both in the same folder Pictures.
    Please advise.
    it sounds to me like you saved one file as 000.jpg and the other and 000.jpg.jpg.
    check the info panels for the files for full names to verify if this is the case.

  • Weird CS4 error when saving eps files on a Mac: "...specified files already exist in the target location"

    Hi There,
    All 3 workstations in our studio are experiencing weird file behavior when re-saving eps files from Illustrator.
    Basically Illustrator creates a new file in addition to the original and adds a "-01.eps" onto the file name. If you re-save your original, Illustrator brings up a dialogue box that states:
    Some of the specified files already exist in the target location. The files marked below will be replaced:
    filename.eps
    filename-01.eps
    We've been deleting the "-01.eps" files each time but it's becoming tedious. The behaviour occurs when re-saving an eps file to a server or the desktop.
    All machines are new Quad-core MacPros running:
    - Leopard 10.5.8
    - Illustrator CS4 14.0.0
    We've checked for Illustrator updates from within Illustrator but we seem to be running the latest version.
    Is anyone else experiencing this behavior?
    Any help or pointers in the right direction would be much appreciated.
    Cheers
    Ben

    Thanks for the reply.
    The error occurs when we save the document but if we choose save as, "Use Artboards" seems to be unchecked so not sure if this issue is related or not. Will re-save the document using save as then see if the issue persists.
    Why do we still use eps?
    Basically because we've found it to be much more compatible. Our entire logo library is in eps format (18 years worth) partly because it was previously the only format to use and partly because it allows account managers to send logos to clients, printers, TV stations etc and not involve the studio (saving out an eps version).
    Although "Create PDF compatible file" is a good idea, we've encountered costly issues with colours and images - especially if the recipient is using old CS software, non-Adobe software or is using some kind of hardware RIP. We now just go with what we know works.
    But I do find saving eps versions of everything to be a bit painful. In fact, I've always found Illustrator in general to be a bit painful when compared with Photoshop or AfterEffects. Illustrator seems like it's been developed by a different company some times!
    Cheers, and thanks for the help.

  • Is there a way to reduce the size of a final PDF created for print when saving a file?

    Is there a way to reduce the size of a final PDF created for print when saving in any software (especially illustrator)? I don't want any quality to decrease at the same time. Thanks!

    Personally I would avoid optimizing the PDF's via Adobe Acrobat Pro unless you understand what you are removing from the PDF; having said that, it is the most effective way to reduce the file-size in the right hands.
    If I am sending out layouts for commercial print I change my default Print / Export setting from Standard to PDF/A-1b:2005 (CMYK). This will resolve a lot of common print problems for print-ready documents and it should embed your fonts and flatten transparencies etc.
    If your document is still too large you run an Audit Space Usage using Adobe Acrobat Pro. In the left pane enable 'Content' and then hit the button in the top left corner of the Content Pane and choose Audit Space Usage.

  • Firefox crashes when saving a file using the "Alsways ask me where..." download option, but NOT when using the default "Save files to..." download option.

    My OS is XP-x64.
    The Firefox version I am on is 14.0.1 (July 2012, "FunnelCake").
    The "C: \Documents and Setting\Downloads\" is the folder I used to try downloading the same file to via 2 different methods.
    1) When this folder is set as the permanent download location, it works.
    2) When I use the "Always ask me where.." download setting, and I select the same folder, the Firefox window completely disappears without any message at all !
    I get the same result with (2) even if I already turned my VirusScan software off.
    This same behavior persists after completely uninstalling and re-installing Firefox.

    Hi,
    You can try to right-click and '''Reset''' the '''browser.download.lastDir''' key in [http://kb.mozillazine.org/About:config about:config].
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • I have succesfully replaced firefox 4.0.1 with 3.6.2 as I have a Mac Mini but not the intel chip. Everything works fine except I can't get rid of the install window and the firefox logo in a simulated drive on my desk top home screen.

    When viewing videos, they would seem to running in slow motion. I thought that by reverting back to an older version that was compatible with my system that I might correct the problem.

    Does the iPod work OK?
    Does it charge when connect to the computer?
    Does it appear in My Computer?
    Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
    I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
    http://support.apple.com/kb/HT1353#iPod_touch_late2009
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • I work at a publication that referred readers to the Dispute Finder plug-in, but I can find no way to access/download the plug-in. Does it still exist?

    If it no longer exists, when did it disappear?

    Looks like that Firefox extension was pulled from AMO. <br />
    https://addons.mozilla.org/en-US/firefox/addon/11712/
    Mozilla sent email to all Add-on developers around the first of the year, as the first step in a cleanup process for the Addons website. Addons created by Developers who didn't respond to multiple emails were deleted from AMO just prior to the Firefox 4.0 release.
    I also found a link to that Add-on here ''(where it was created)'' - http://disputefinder.cs.berkeley.edu/ - but it looks like it is gone from that server, too.
    http://confront.intel-research.net/Dispute_Finder.html

Maybe you are looking for