The "Null Error Stack" that is shown in the Run time workbench

The Data is set to flow from SAP R/3 system to target system through XI. When the data is triggered in the SAP system, the same data is getting updated in the target system database. But when i check in the Run time workbench for the same, in the active log the following error is shown
"Received XI System Error. ErrorCode: RUNTIME_EXCEPTION ErrorText: null ErrorStack: Runtime exception occurred during mapping" and "
The message was successfully transmitted to endpoint com.sap.engine.interfaces.messaging.api.exception.MessagingException: Application:RUNTIME_EXCEPTION: using connection RFC".
When i monitor the same using T-code sxmb_moni, i am getting the error "Thrown: java.lang.NullPointerException".
Can someone please explain what is this Null Pointer Exception and how can this be solved?

Hi Lavanya,
This can be the mapping error.
Take the source payload from SXMB_MONI, copy it and paste in the 'Test' tab of Message mapping in IR.
Check if you are getting any error or it is successful there.
-Supriya.

Similar Messages

Restrict filter values that are shown in the selection screen

Hi Experts
1) Is it possible to restrict the filter values that are shown in the selection screen in BEx web? When a user are asked to enter a material number and uses the selection button in BEx web, he should only see material numbers for one specific plant. How is this done?
2) Is it possible to remove the selection button for å characteristic filter in the selection screen in BEx web? The selection button I am talking about is the button to the right of where you enter the filter value (two white papers on top of each other). If there is no solution for question 1 we have to go for question 2 solution.
We are using BI 04s, SP 09.
Kind regards
Erik

Hi Erik,
It seems that you would like the user to see value for 1 single plant. If the Plant Value is fixed then you can use this value in the Query and hardcode it.> in the query go to the Plant Chrac and keep a constant value of the Plant.
How ever if you need this value to be dynamic then use a variable for customer exit and populate this value using ABAP.
Regards,
Jasprit

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

I have photoshop C6 on my MAC Pro and want to install it on my new MAC desktop. I sent the files with AirDrop but photoshop wont open I get an error message that it cant find the Library. Any thoughts?

download the installation files and install using your serial number or adobe id,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Hi, I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.

I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.

What do you see under Edit > Preferences > Devices?
tt2

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

HT1351 I have tried numerous times to resolve an issue with my wife's iPod (5th gen#. When I connect to iTunes I get a pop up error message that goes like this - The iPod "Linda's iOod" cannot be synced. An unknown error occured #13019)...What do I do?

I have had very much trouble adding music to my wife's iPod. Every time I connect to iTunes, I get an error message that reads ...The iPod "Linda's iPod" cannot be synced. An unknown error occured (13019)...I have tried diagnostics, help and what ever iTunes has to offer and cannot fix the issue. I want to add a new playlist with new music. When I connect her iPod, the playlist shows up on her device. When I disconnect, I can not find it in order to play it. Help me.

Some other posts seem to indicate that the cause is related to voice memos. You may want to try the remedy described in this document
http://support.apple.com/kb/ts2830
although it says it's for the 6th gen iPod nano.

TS1424 I purchased an album from iTunes using my computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to t

I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Whats the app that is shown on the screen of the iPod touch on the game center section at the website?

on this link: http://www.apple.com/ipodtouch/built-in-apps/game-center.html
whats the app that is shown on the ipod screen? **** it looks cool!

It has been moved to another screen on the iPod or been moved into a folder of Apps?
If you search for it by swiping to the right and entering in the name of the App does it come up then?
B-rock

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

Why does Apple not give a list of error messages and possible solutions? I have the (-54) error continually that has suddenly appeared and cannot find a solution, even though other users seem to have the same problem.

This is a user to user forum. Apple isn't here and won't answer you. You need to contact Apple directly. You can use the Contact button at the bottom of the screen.

HT201263 hello guyz i m having problem while restoring my iphone 4.It is showing me the 1600 error before that it showed 3194 error i fixed that after that it showed me the error 1601 also i fixed it but now with 1600 plz plz help me guyz

hello guyz i m having problem while restoring my iphone 4.It is showing me the 1600 error before that it showed 3194 error i fixed that after that it showed me the error 1601 also i fixed it but now with 1600 more then 20 times tried but no advantage plz guyz help me?

iTunes: Specific update-and-restore error messages and advanced troubleshooting - http://support.apple.com/kb/TS3694 - relating to iPad, iPhone, iPod touch, iTunes

TS2776 I can't sync my iPhone movies. Have 3 movies but I get an error message that says some of the items in the iTunes library weren not copies because they could not be found. What do I do?

I can't sync my iPhone movies. I have 3 movies but now I am getting an error message that says some of the items in the iTunes library were not copied becuase they could not be found. Two of the movies are from the iTunes store and one is froma movie recently purchased.

Had the same issue, found a solution.
The iTunes Store open in my iTunes was U.S. and the apps on my iPad are from Switzerland's store. So I went to iTunes Store in iTunes, then opened the App Store tab and at the bottom right of this tab clicked the round american Flag button. Changed to Switzerland, went to Store>Authorize this computer (which it did sucessfully) and after that syncronization worked great. Hope this helps

I burned photos to a CD-R and the CD-R automatically ejected. Now I keep getting an error message that says to complete the burn before I can quit iPhoto.

I burned photos to a CD-R and the CD-R automatically ejected. The photos are now on the CD-R. Now I keep getting an error message that says to complete the burn before I can quit iPhoto. I can not shut down the computer until iphoto shuts down.

Hit Command + Option + esc on your keyboard and force quit iPhoto. I'm sure it just got stuck talking to your optical drive.
Hope it helped

Bug? My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future.

My events on the iPad iCal app aren't shown in the year view if they are more than two years in the future even though I can see them on the month, week and day view. Any suggestions on how to fix it? I've tried it all. I called the apple support and they checked on their iPads. They all did the same and they couldn't help me. They suggested trying this way. I'd like to be able to plan a few years ahead and the year view would make thing so easy!
Is this a bug?

Go to the Home screen and double click the Home button. That will reveal the row of recently used apps at the bottom of the screen. Tap and hold on the app in question until it wiggles and displays a minus sign. Tap the minus sign to actually quit the app. Then tap anywhere on the screen above that bottom row to return the screen to normal. Then restart the app and see if it works normally.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.

When I open a link from another website ForeFox puts a messagge at the top of the new link saying that it has blocked the websiste from transferring me to a new

When I open a link for another website Firefox opens a new tab but puts a line on the top of the new page saying that Firefox has blocked the website from transferring me to another page.
I have to press ALLOW before Firefox will open the new page.
How can I solve this problem.
Many thanks in advance.

hello betth007, in order to get effective help, please open a new question at https://support.mozilla.org/en-US/questions/new instead and include a bit more details about your issue (what kind of error message are you getting, etc.). thank you!

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

The "Null Error Stack" that is shown in the Run time workbench

Similar Messages

Maybe you are looking for