The number of active Object monitors has overflowed.
hello,
please is any one has information about this error? and when it occure?
Error Message: The number of active Object monitors has overflowed. [87]Exception Rec: EXCEPTION_ACCESS_VIOLATION (00000000c0000005) at 0x000000001006C5E0 - memory at 0x0000000000000000 could not be written.Minidump : Wrote mdmp. Size is 3827MBSafeDllMode : -1
Fatal Error : The number of used monitors is 2097152, and the maximum possible monitor index 2097151Version
we found it in the application log file.
This means that the application currently has over 2 million Objects that are involved in synchronization operations and has created object monitors. This is highly unusual and should be investigated.
/Staffan
Similar Messages
-
Monitoring the number of active calls in a gateway from HUM
Hi,
we are configuring HUM and we want to display the number of active calls in a gateway but we can't find any OID's that show exactly what we want. So we are going to use the EXPRESSION-MIB in order to calculate some values we need.
In MRTG we launch a snmpwalk query against the OID 1.3.6.1.4.1.9.9.63.1.3.1.1.9 (cvCallActiveInSignalLevel) and we count with a counter the number of rows obtained from that snmpwalk. The calculation is as follows:
@ret=snmpwalk(sigint03.'@'.'x.x.x.x'.'1.3.6.1.4.1.9.9.63.1.3.1.1.9');
foreach $campo (@ret) {
$cuenta=$cuenta+1;
print $cuenta."\n";
But we don't know how to implement the "foreach" loop with the EXPRESSION-MIB... and we don't know any other way for getting the number of active calls.
Can anybody please help me?
Regards.Hi, I've only changed the command:
snmpset -v 2c -c private router expExpressionValueType i 4
with:
snmpset -v 2c -c private router expExpressionValueType.1 i 4
and
snmpset -v 2c -c private router expExpressionValueType.2 i 4
because, an error message appeared if not using the index. So, finally, the commands used are the following:
snmpset -v 2c -c private router expNameStatus.110.110.110.110.110 i 6snmpset -v 2c -c private router expNameStatus.110.110.110.110.110 i 5snmpset -v 2c -c private router expExpressionIndex.110.110.110.110.110 gauge 1snmpset -v 2c -c private router expExpressionComment.1 octetstring "numeroEntradas"snmpset -v 2c -c private router expExpression.1 octetstring '$1 >= 0'snmpset -v 2c -c private router expObjectID.1.1 o 1.3.6.1.4.1.9.9.63.1.3.1.1.1snmpset -v 2c -c private router expExpressionValueType.1 i 4snmpset -v 2c -c private router expObjectIDWildcard.1.1 i 1snmpset -v 2c -c private router expObjectStatus.1.1 i 1snmpset -v 2c -c private router expNameStatus.110.110.110.110.110 i 1snmpset -v 2c -c private router expNameStatus.111.111.111.111.111 i 6snmpset -v 2c -c private router expNameStatus.111.111.111.111.111 i 5snmpset -v 2c -c private router expExpressionIndex.111.111.111.111.111 gauge 2snmpset -v 2c -c private router expExpressionComment.2 octetstring "sumaEntradas"snmpset -v 2c -c private router expExpression.2 octetstring 'sum($1)'snmpset -v 2c -c private router expObjectID.2.1 o expValueInteger32Val.1.0.0snmpset -v 2c -c private router expExpressionValueType.2 i 4snmpset -v 2c -c private router expObjectIDWildcard.2.1 i 1snmpset -v 2c -c private router expObjectStatus.2.1 i 1snmpset -v 2c -c private router expNameStatus.111.111.111.111.111 i 1
But there are no entries in the expValueInteger32Val OID, so later, in the sum expression, there is no elements to sum. Please, find attached 2 files with the snmpwalk outputs.
How could we get to have values in expValueTable?
Many thanks. -
Getting the number of active connections in a connection Pool
Hi,
I have an application deployed on jboss. DB used is db2. For monitoring purpose i need to get the number of active and idle connections at any point of time. I am trying to use commons-dbcp jar to get this data using BasicDataSourceClass. Following is the piece of code.
Context initialContext;
try {
initialContext = new InitialContext();
DataSource ds = (DataSource) initialContext.lookup(myjndiname);
logger.info("************CONNECTION POOL DATA->" + ds.getClass().getName() + "************" + ds.getClass() + "**************");
BasicDataSource bds = (BasicDataSource) datasource;
logger.info("************CONNECTION POOL DATA-> ACTIVE CONN=" + bds.getNumActive() + " IDLE CONN=" + bds.getNumIdle() + " INIT SIZE=" + bds.getInitialSize());
catch (NamingException e) {
// TODO Auto-generated catch block
e.printStackTrace();
This code gave a class cast exception at the point datasource is cast to BasicDataSource. The class name returned by ds is WrapperDataSource. I have few queries on this:-
1. What configurations do i need so that datasource returned by InitialContext is BasicDataSource? FYI i tried to add the BasicDataSourceFactory in db2-ds.xml. But it still didnt work
2. Is there any other way to find the number of active connections in a connection pool? I dont want any server specific solution.
Pls help.
Thanksuser13642196 wrote:
Hi,
I have an application deployed on jboss. DB used is db2. For monitoring purpose i need to get the number of active and idle connections at any point of time. I am trying to use commons-dbcp jar to get this data using BasicDataSourceClass. Following is the piece of code.
Context initialContext;
try {
initialContext = new InitialContext();
DataSource ds = (DataSource) initialContext.lookup(myjndiname);
logger.info("************CONNECTION POOL DATA->" + ds.getClass().getName() + "************" + ds.getClass() + "**************");
BasicDataSource bds = (BasicDataSource) datasource;
logger.info("************CONNECTION POOL DATA-> ACTIVE CONN=" + bds.getNumActive() + " IDLE CONN=" + bds.getNumIdle() + " INIT SIZE=" + bds.getInitialSize());
catch (NamingException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}This code gave a class cast exception at the point datasource is cast to BasicDataSource. The class name returned by ds is WrapperDataSource. You can only cast an object to an interface it implements or to a class it extends (directly or indirectly).
I have few queries on this:-
1. What configurations do i need so that datasource returned by InitialContext is BasicDataSource? FYI i tried to add the BasicDataSourceFactory in db2-ds.xml. But it still didnt workhttp://commons.apache.org/dbcp/api-1.2.2/org/apache/commons/dbcp/package-summary.html#package_description -
Why do the number of active JMS connections increase?
<strong>Problem</strong>
- Number of active JMS connections and current JMS messages increases until the Weblogic instances crash with an OutOfMemory exception
<strong>Setup</strong>
- Weblogic v9.2.3, Cluster with 4 Nodes
- A JMS Message is sent from a MDB in Weblogic to a distributed queue which has a member on each of the 4 Weblogic nodes. The session is created as follows session = connection.createSession(false,Session.AUTO_ACKNOWLEDGE), the message delivery mode is set programmatically to persistent and the delivery mode override of the queue setup is set to persistent too
- Standalone JMS client processes: each one is attached to <strong>all</strong> 4 nodes. Each one uses a unique JMS message selector so that we have more than one queue consumer for one queue but every message is exactly dedicated to one queue consumer. We us weblogic.jar for the clients.
- Use of Weblogic auto reconnect feature. JMS client code:
Connection connection = this.connectionFactory.createQueueConnection();
final WLConnection wlconnection = (WLConnection)connection;
wlconnection.setReconnectPolicy(JMSConstants.RECONNECT_POLICY_ALL);
wlconnection.setTotalReconnectPeriodMillis(-1);
wlconnection.setReconnectBlockingMillis(-1);
<strong>Remarks and Questions</strong>
- There are no pending JMS messages which is good
- In our setup, each JMS client is connected to all 4 nodes as the messages are not distributed to all nodes: if a message is put to Queue A but the client is only connected to Queue B, the message is NOT transfered from Queue A to Queue B. We set the parameter "Forward Delay" to 5 seconds with no effects. Is this the normal behavior?
- Not all JMS clients are visible in the Weblogic console under JMS Services -> JMS Servers -> [Server] -> Monitoring -> Active Connections. Which one are visible? Which one are not visible? There are also clients where the number of connections is not zero but stays constant; we know that as several independent clients on different hosts are started and the IP adress is visible in the Weblogic console. Why....?
- What reasons can lead to increasing connections? Is this due to client or server problems? Do we have to acknowledge the message in the onMessage(Message) method of the client JMS consumer? So far as I know, we don't have to.
- Are the increasing number of current messages due to the increasing number of JMS connections?
- May the RECONNECT_POLICY_ALL policy produce this problem?
Any hint is appreciated.
Peter
Edited by: pkeller on 23.10.2008 17:08To answer the question about the forwarding of messages from one queue to another myself: As mentioned at http://forums.bea.com/thread.jspa?threadID=400000611, the forwarding for queues does only work if all queue consumers are attached to the same queue. This means that our setup is OK.
But the main question is still unanswered: why do the number of active JMS connections increase? I forgot to mention that
- all messages arrive at the clients and that no exceptions are visible in the log
- if you kill the client, the connections are still visible in the Weblogic console!?
Please help as this problem is very urgent.
Peter
Edited by: pkeller on 24.10.2008 09:06
Edited by: pkeller on 24.10.2008 09:10 -
I just installed Visio 2003 on a PC, and got the "we can't activate this app via the internet because you've installed it too many times" message. I went back to phone activation, but, of course, that's no longer available for this product.
How do I get the number of activations reset? Apparently you used to be able to do this by calling Microsoft, but what's the number to call? Or is there another way to do it?
I'm probably going to need to do it for my copy of Office 2003 also.Hi,
Microsoft has ended support for Office 2003 on April 8, 2014. This change will affect your software updates and security options.
Please contact your local customer service. Explain to the service (Human being) that you can’t activate Visio 2003 and the error message is “we can't
activate this app via the internet because you've installed it too many times”.
You can find
your local custom support number on the link below.http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Hope it can be helpful. -
The number of active sessions isn't decreasing in OC4J instance
Hi Guru’s,
Could you help me, please?
The number of active sessions isn’t decreasing in OC4J instance after our clients closed the application.
Our partner use Oracle AS 10gR3 (10.1.3.4.0) with J2EE and HTTP mode.
When we monitoring our OC4J instance with Performance tab on Oracle EM, we appreciate that the value of Active Sessions on ‘Servlets and JSPs’ are very high. If users close our applications, then number of active sessions isn’t decreasing and active status isn’t becoming inactive.
Which OC4J settings responsible for managing active sessions and how can I get more information about the active session details?
Thanks in advance,
ZoltanDinesh.Rajak wrote:
When I deployed this code Tomcat, it is giving the output as 0, hence tried with accessing the jsp file in multiple browsers but still it is showing the count of active session as 0 - plz helpPlease, don't resurrect old threads, and it's still the wrong forum. Create a new thread if you have a specific question, and create the thread in the correct forum. I'm closing this thread.
Kaj -
Report showing the number of active users in the system
All,
There is a standard SAP report which shows the number of active users in the system (output same as AL08).
Does anyone remember this?
Cheers,
BidwanHello Bidwan,
Are you talking about the report RSUSR000?
Regards.
Ruchit. -
How to calculate the number of times an user has accesed a BEx report
Hi Experts,
We have number of reports in our BW portal and users logon to the portal and run the reports.
How do we count the number of times each user has logged in and ran each report.
Kindly advice.
Thanks,
SaiHi Sai:
I think you can use BI statistics information, which could provide you more detail information.
You can follow the document
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards,
Louis Lu -
Check the number of active users of oc4j in EBS
Hi,
I often see a recommndation of sizing jvm's to 1 per 100 active users. How can I find the number of active users currently using a jvm in EBS. We have 4 apps servers and 1 of apps servers also runs OBIEE with it's own jvm.
I can find out from a unix command prompt counting establish connections to the port but I like to know if there's a better way to find the number of active users using the jvm's
Thanks
MikeHi,
To find the number of active user session on each of the application servers from a unix command line. I would find the port that Apache was listening on eg 8100. The use the following command on each of the apps servers
netstat -an | grep 8100 | grep -i est | wc -l
This gives a rough idea of how many active connections are established to the apps server. But I would really like to find how many users are actively using o4cj.
If you are using forms in socket mode again, you can grep on the forms listening port number to find how many active forms users are connected.
I can also see how many active connections are in the oc4j established to the database using lsof. Find the process id for oacore jvm.
lsof -p PID
But I'm sure there's a better and more accurate way of find active users of o4cj, specifically oacore.
Thanks
Mike -
How to know the number of Active users logged in to a Essbase Application?
Hi,
Is there way to capture/log the number of active users who have logged into a particular Essbase application at a given time.
In Essbase or in Shared services?
I know we can see the EAS-Edit Sessions shows the actively logged-in users, then we can sort on the application/database & manually count the number.
Is there a way to capture it in a log at a given time on a regular basis. Any MAXL or Shared services feature?
Appreciate your thoughts.
Thanks,
Ethan.You could use maxl .
display user all;
there will be a column called "logged in" which will display true/false for the users
but that will just show if they are logged into the server and not the application
You can also use use display session
display session all;
or
display session on application sample;
which should show what you are after.
Cheers
John
http://john-goodwin.blogspot.com/ -
How can I find out the number of pixels a photo has in i photo.
How can I find out the number of pixels a photo has in iphoto.
Do you mean in iPhoto on the MacBook Pro?
The dimensions (width and height iin pixels)are shown in the "Info" panel - multiply the two numbers:
Regards
Léonie
P.S: on an IOS device you see the same information in iPhoto, when you select the photo in an album and click th Info button ( i ). -
*IMPORTANT* Limiting the number of active threads
Hi All,
i have a few of questions so please bare with me:
1) What is the best way to limit the number of active threads? ie i want to run 10 threads but i want there to be only 3 running at a time.
this is how im thinking of doing it rite now:
count = 0;
while(...)
thread[count].start();
while(threadgroup.activeCount > 4){}
count++;
2) I have a class that extends thread how do i overide the constructor so that i can add the thread to the threadgroup?
ok here is an example of what i mean:
u can do this with a normal thread: Thread one = new Thread(threadgroup, "what");
this is what i need to do tho:
class whatever extends Thread {
public whatever(int a, int b, ThreadGroup tg)
{ what do i put here to make this thread part of the tg threadgroup?}
thanx for any help in advance and i kinda need a quick answer cause this is due soon , thanx youssefe2k4Hi,
1) Why do you want to do that?
2) super(tg, "a name");
/KajIt's part of a homework assignment... I saw another post on this forum and one at JavaRanch where you need to create an application that given a directory will scan each file and report the file name and how many lines are in them... but it must be multithreaded, each thread scan a single file and updates some list and finally you can only have three of these file scanning threads running at the same time...
Quote "To avoid having too many threads competing for the system resources when there are a lot of files in the directory, we will restrict the number of active Producer threads (active threads are started threads that have not ended yet) during the run time. For this assignment, at any time there should not be more than 3 active Producer threads. If there are already three active Producer threads during the run time, the program should wait until one of them ends to start the next Producer thread."
I was think about working on it, so that I can strengthen my knowledge in threads...
I still might do it, just for fun... I don't know yet...
We will see...
- MaxxDmg...
- ' He who never sleeps... ' -
I mainly just use my iTunes for organizing and adding new songs. Most of the time I listen to my music on my iPhone. I wish it would keep track of how many times I play a song in my music and transfer it to the computer under the 'number of times played' column. It would help out so much! Does anyone know if there is a way for the number of time a song has been played on your iPhone/iPod be transferred to the songs on your iTunes number of plays?
Hi @imobl,
You sound like an Apple support guy who hasn't been able to answer my questions.
To respond to some of the points you made,
- I did not ignore Ocean20's suggestion. If you has read my post, you would have known that I took my phone to the apple service centre where they tried this restore on THEIR machines. I am assuming that Apple guys know how not to block iTunes. So I actually do not understand your point about me trying the hosts file changes on my machine. Do you not believe that apple tested this issue with the correct settings?
- you also give a flawed logic of why the issue is a hardware issue. You mentioned that If I thought that the issue was with the software, i should try a restore and getting it to work. The problem is that my error (23), and many others comes up when the restore fails. And you would be astonished to know that not all errors are hardware errors. Sometimes even software errors prevent restores. Funnily enough Apple itself mention that 'in rare cases, error 23 could be hardware related'.
- all Apple has done so far is replicate the issue. I don not know how anyone can conclude that the issue is a hardware issue.
And by the way, I am not certain that this is a software bug. Again if you read my Posts, you will notice I only want a confirmation,/proof that the issue is hardware related as they mention..
Please refrain do. Responding if there is nothing to add. -
My hotmail tab showed the number of emails receved but has stopped
I have tabs along the top of my page,the hotmail tab showed the number of emails received,but has stopped showing them,can you help?
Hotmail has been having some hiccups lately. Try clicking the grey bar which has the word "Inbox" in it.
Also, click "Help" | "Check For Updates" and update Firefox to v3.6.19
Similarly, please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary. Out of date plugins expose your system to attack. -
How Do I Assess The Number Of Times A Page Has Been Hit?
Can anyone identify the schema, table and field that when queried identify the number of times an individual page has been accessed?
I want to create a 'hit counter'. Ideally the field would identify all accesses, not by IP address or username or any other denominator.portal30.wwlog_activity_logs
Portal logs activity in two tables wwlog_activity_log1 and wwlog_activity_log2. It toggles between these two tables every week by default. The wwlog_activity_logs is a view connecting both of these tables.
Be prepared to do some homework to figure out how to identify the actual page(s) you want to log. It's not clear cut and also be aware that you can't get down to the actual tab pressed within a page without some custom coding... and also, portal purges logged data every two weeks by default.
Maybe you are looking for
-
No batch input data for screen SAPMSSY3 0131
Dear All, I have developed a report where i need to upload (old and new)incoterms,payment terms,document type and update in the table ekko with my new values (incoterms,payment terms and document type). Problem :For this report i have uploaded the e
-
What are the allowable dimensions of screenshots for ibooks?
What are the allowable dimensions of screenshots for ibookes? I know the requirement is very specific. And what is the best tool to do so? I tried to use the native screenshot tool but it is hard to make the size precise.
-
My page is here: http://www.healthquestpt.com/lwh/ The first 2 tabs dropdown menus work fine, the rest just arent there. Please help. Thanks!!
-
DVD-MOV mpegstream clip error: "File open error: unsupported file type"
I do it all the time this is the only time i've gotten this error, i use mpeg stream clip. I have a dvd I got from a DVR recorder, I open the dvd which shows 2 VOB files in the TS folder. the MENU gives "Warning: the stream may have timecode breaks."
-
What do i do if i right to a datasocket..Do i have to make a special file on my server, How do i create a datasocket server.?? Do i use the same "address" to read a datasocket?