The number of partner 'Ship-to party' limit is reached ?

Hi,
We have reached the maximum number of ‘Ship-to-party’ partners for one Sold-to-party partner.
Is it possible to exceed 999 partners for Sold-to-party partner ?
Get-there action was to make possible?
Thanks in advance for your help

Thank you all for your help.
Phanikumar V wrote:
Standard system will not allows you create more than 999 partners for a Customer.
If you see KNVP table --field PARZA(counter)--can have an option up to 3 digits only--If you need more,then need to go with Enhancement.
Pl see this thread.
Ship To's Partnered to Sold To - Toolbox for IT Groups
Phanikumar
I close the discussion, however, I am really surprised of such a limit and I cannot find the reason why SAP developers chose this solution, especially a relationship 1 to N is possible.
Again, a nugget.
Kind regards
Edit : Is Standard Message Error
There are already 1000 entries for function SH
Message no. F2699
Diagnosis
Within one sales area, you can only maintain 1000 entries for each partner function. The function entered here has exceeded this limit.
Procedure
You must delete the appropriate number of old entries before you can make new entries for the partner function concerned.
B.R.

Similar Messages

Converting External Ship-to-party number to Internal ship-to-party number

Hi Friends,
I am working on Ale idoc scenario in which i need to create sales order from customer purchase order. for this i need to maintain ship-to-party number in advance. Customer is providing me with list of ship to party number, but i dont want to maintain external number. I wan to maintain internal ship-to-party number and assign it to external ship-to-party number coming from idoc from customer PO.
So Please suggest how can i do this. is there some standard functionality provided by sap for this, coz i think this is standard requirement.
Thanks ,
Brijesh Soni

Hi Brijesh,
You can maintain the value of external ship to party number in the customer master against a system generated(internal) customer number.
This can be done in the sales view----partners tab of customer master. The field is called"partner description".
When you received an idoc,you can match the customer number in idoc to the field KNVP-KNREF and against this field pick value of KNVP-KUNNR. once the system determines the correct sold to party then ship to party will be determined automatically.
SAP has given KNREF field especially for these kind of scenarios.
Regards
Karan

How to maintain the multipul address to ship to party

hi sd network this is prasad i want to the solutions

At header level we can change the address of ship to party manually.For the item level initally it will be disabled no changes will be allowed.In order to change the address,first delete ship to party number or name enter any other ship to part name,it ask for redetermining of route then,again enter the old SH no(if required) and again ask for redetermining of route.
Now double click the SH,this will enable to enter new address.
Hope this will help you
Ramesh

Limit the number of partner functions for a reltionship category

Hello All,
We have a requirement,where we have to limit the number of business partners relationship to two.For example we have to limit the number of Account Executives for a customer to two.The Account Executive can be AE or Local Account Owner .The Local Account Owner has to be limited to one .
I know how to limit the number of Account Executives to two.But I am not sure how to limit the Local Account Owner to one.
Can anyone please guide me .
Thanks,
Kitcha.

Hello All,
We have a requirement,where we have to limit the number of business partners relationship to two.For example we have to limit the number of Account Executives for a customer to two.The Account Executive can be AE or Local Account Owner .The Local Account Owner has to be limited to one .
I know how to limit the number of Account Executives to two.But I am not sure how to limit the Local Account Owner to one.
Can anyone please guide me .
Thanks,
Kitcha.

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

How do I send a dunning notice to the PAYER & NOT to ship-to-party?

Hi All,
Even if I dun the PAYER, the dunning notice is created for ship-to-party account specified in the sales order .
Can I customise SAP to send dunning notices to PAYER and not to SHIP-TO-PARTY?

Please check the document flow of the sales order.
SO-> Delivery -> PGI -> Invoice -> FI Doc.
In the FI Doc check the name and Code of the customer. Is it same as the "ship-to party". It should have been the payer as per the standard practice.
Thanks.
Ashish

Issue in population of Ship to party house number in Sales Order

Hi Experts,
I have created a program that creates an IDOC from the input file and then it uses
IDOC_INPUT_ORDERS to create sales order from the IDOC.
Now, the input file has Ship to party that is different from the Sale to party.
So, I created the IDOC with two E1EDKA1 segments.
1> E1EDKA1 and PARVW = 'AG' PARTN = some number from file.
2> E1EDKA1 and PARVW = 'WE' PARTN = value from file
Also STRAS, NAME1, ORT01, PSTLZ, LAND1, REGIO and IHREZ
is populated on the basis of values from the file.
Now, STRAS consists of both Street and House number.
And in my final sales order created I can see all other ship to party details.
But, the house number is being picked from that of Sold to party.
Please advice on how we can get the house number for Ship to Party.
Thanks in Advance.
Amit

Hi Hadiman,
My problem is non population of house no in Ship to party detail.
The house number I am referring is the one of E1EDKA1-STRAS
which is combination of street and house number.
I tried by passing the house number into E1EDKA1-HAUSN . But, again I faced the
same problem.

Get the Ship-to-Party from Sales Order and Line item

Hi all,
I am developing one report in which I want to get the Ship-to-Party for a particular Sales Order and Sales Order Line item number.
I can see table VBPA from I can get value of KUNNAR and so on. But my concern is that can the Ship-to-Party differ for different line items for sales Order, if yes how to get that one, any table or any function module?
In my scenario i found out that ship-to-party only depend upon sales order and partner function not line item.
please help me..
regards,
vikas.

Hi,
First step: Customer Creation (T. Code: XD01)
i) Create Sold to Party (Ordering Party) with Account Group: Sold-to-Party
ii) Create as many Ship-to-Party and Bill-to Party, if reqd, with Account appropriate Account Groups.
iii) Match all the Ship-to-party/ Bill-to-Party/ Payer for the respective Sold-to-Party under Tab: Sales Area data, Sub-tab: Partners.
Second Step: Sales Order Creation (T.Code: VA01)
i) Enter Sold-to-Party at Header Level.
ii) Enter Materials (at Line-item level).
iii) Now, System will pop-up all the Ship-to-Party/ Bill-to Party/ Payer, Matched for the particular Sold-to-Party. Click on appropriate selection.
OR
Now, (if option doesn't pops-up) select the line and Double Click on to the same line. it will lead to the next page. Here, Click Tab: Partners
Now, in Column: Partner Function, search for appropriate Partner: Ship-to-Party or Bill-to-Party or Payer.
Remember: Sold-to-Party will be non-editable as entered at Header level.
Repeat the same for Each Line-item.
Regs,
Amit K. Yadav

Need information of Table containing Ship-to-party Partner at Sales Order

Hello SAP folks,
There is a scenario where we need to change the shipping address detail of a partner funtion "Ship-to-party" at Sales Order level. so I just wanted to know which tables stores all the data related to Address of Ship-to-party after the Sales Order is created.
Suggestions are eagerly awaited in this topic !!
Regards,
Sarthak

Hi sarthak
As soon as you change the address for any partner in sales order, the changes are recorded in table ADRC. ( Normal address table for business partners)
Select table VBPA and for the document number (VBLEN) and item number (POSNR) get the address number ( ADRNR) for the ship to party (WE)
Now in the table ADRC with this ADRNR you can find the changed address for ship to party for the order.
regards
makarand

Link between the Ibase & Ship to Party

Hi,
I need to find out who is the Ship to party of the Ibase. I have the Ibase as the input. No other details.
IB53->GOTO->Partner->Ship-To Party
Can I know any table or FM through which I can find this.
Thanks
Kris.

Hi Krishna
Table CDBD_IBPART will give you the link between the IBase, Partner function and Partner number.
From the table CDBD_IBIB, you will get the IBIB_GUID for a particular IBase. Put this IBIB_GUID in the REFGUID field in table CDBD_IBPART. So, from the field Partner_Fct you get the Partner function(Sold-to party, Ship-to party, etc) and the field Partner_No gives you the GUID of the partner assigned to the IBase.
Hope it helps.
Plz reward points if helpful.
Thanks and Regards
Debolina

Multiple ship to party address default setting in the " sales order creat

we use the SAP ECC 6.0,
I've a problem about the "ship to party" in the sales order creation,
the customer have 3 ship to party,
the pop up "Partner selection", default show is: "Title" , "Name1"....
But I want to default to show the "Street"
I check the sap notes: 302835, and add the "SD_VARIANT_MAINTAIN" = A in my user profile.
But seems can't working,
when click the right mouse button. A menu can't displayed.
Does anyone have the experience, Thanks.

It seems so strange ...
First of all you need to set the ALV administrator parameter among the parameters of your user-id
System-> User Profile> Own Data> Parameters
add the parameter "SD_VARIANT_MAINTAIN" = A in your user profile and SAVE
After that, execute VA01 again; when the ship to party selection pop-up appears, place your cursor at a point on the screen and just the hotspot appears , click with the right mouse button in order to open the context menu.
The "Administration" function would serve only to set the default display variant; the functions "Current Layout", "Save Layout" allow you to create the variant with the needed fields (the popup is an ALV .... )
Try to execute the described steps and give us asap a feedback...
Regards,
Andrea

Ship to party & Sold to Party partner functions anamoly

Hi all,
I was just thinking why a Ship to party cannot be a Sold to party?
Say, if an enterprise.say, XYZ Pvt. Ltd. sales Steel almirahs.XYZ Pvt Ltd places the order of steel almirahs and then the same XYZ Pvt Ltd. itself receives the order for his business. Then here XYZ being a ship to party also places the order and hence is a sold to party!!
It is quite possible that same client can be ship to party as well as sold to party then?
Then why it is written in SAP manuals that a ship to party can't be a sold party as well?

Hi,
Sold to party and Ship to party can be same and in many cases depending on the business scenario, they will be the same.
The perspective in which the relationship between them is quoted is as follows.
We will have 2 different account groups for sold to party and ship to party.
If a customer is created with the account group of the sold to party, the same customer number can also be used as Ship to party. However if a customer is created with the acc.group of ship to party, this customer can be used only as ship to party and not as Sold to party. This is what is explained in all SD manuals.
Coming to our case, if you want a customer to be both sold to party and ship to party, you have to create this customer master using the account group of the sold to party (not using the account group of the ship to party). If this is done, the same customer can be used as both sold to party and ship to party.
Hope this clears ur doubt. If you have any qns, pls let us know.

No text redetermination once change the ship to party

Hello Experts,
We have text like picking/packing/shipping text in ship to party. and we have assigned such text value in ship to party.
Suppose:
Ship to party A has shipping text: ABCDEFG
Ship to party B has shipping text: 12345678
I create the sales order with ship to party: A and system determine text (header level) as ABCDEFG, I save it later i change the ship to party in sale order from A to B. according to business logic system should change the shipping text from ABCDEFG to 12345678 once I change the ship to party from A to B. But it is not happening.
Even though changing the ship to party from A to B, system is not redetermining text and I am wondering why it's happening?
Is it the standard functionality ? why it is happening ?
Thanks,

How text will be redetermined if the ship to party is changed
Please refer the above tread, System does not re determine the text if Ship to party is changed, it changes only for SP, also if you want to redetermine the SH text then refer the notes also which was mentioned in the above tread.
thanks,
Srinu.

How to see all customers having more than one ship to party?

Dear Friends,
How can I see a list of customers having multiple ship to parties.
Please hlep me to get the solutions. Your help will be highly appreciated.
Best regards
Raghu ram

Hi,
Use transaction code SE16, enter the table KNVP table.
Fill the data like sales org, and enter the partner function as SH. Then in the partner counter field enter > symbol and 0 as value. Then execute. The system will display the list of customer numbers with multiple ship-to party.
If a customer number carries multiple ship-to party, then when a user creates a sales order, the system displays all the ship-to party numbers assigned to the customer (sold-to party) and the user has to select the one ship-to party.
Regards

Sold to party, Ship to party in VA05 report

Dear Experts,
I have one requirement in which I am supposed to display Ship to party and Ship to address fields along with sold to party field in VA05.
1. Document Date
2.Delivery Date
3.GI Date
4.PO Number
5.Name
6.Sales Doc Type
7.Sales Document
8.Created By
9.Sold-to-party
10.Name 1
11.City
12.Region
13.Material
14.Description
15.Sales Unit
16.Order Qty
17.Confirm Qty
18.Shipping Point
19.Status
20.Net Value
21 Ship-to-party
22 Ship-to-address
Now the problem is I am not able to find appropriate user exit for the above requirement since Ship to party and Ship to address fields are not available in VBAP or VBAK tables and the existing user exits are
PERFORM move_userfields USING 'VBAP'.
PERFORM move_userfields USING 'VBAK'.
Thanks in advance!!!
Vishal
Vishal

Hi,
For the sold to party and ship to party, get the values from VBPA-ADRNR where VBPA-KUNNR = VBAK-KUNNR and VBPA-PARVW = SP (Sold to party)
For ship to party get VBPA-ADRNR where VBPA-VBELN = VBAK-VBELN, VBPA-PARVW = SH.
Once VBPA-ADRNR is known for sold to and ship to , pass them in ADRC-ADDRNUMBER and then get ADRC-NAME1, ADRC-NAME2, ADRC-CITY, ADRC-REGIO etc for printing the address details.
Hope this helps

The number of partner 'Ship-to party' limit is reached ?

Similar Messages

Maybe you are looking for