The Number of Screens in Note 4 (Verizon Edition)?

Note 4:  
1. Flipboard
2. Home Screen
3. Amazon Screen
4. S Health Screen
5. Essential Screen
Note 2 (my previous primary phone and now the back up phone)  :
1. Screen 1
2. Amazon Screen
3. Home Screen
4. Screen 4
5. Screen 5
6. Screen 6
7. Screen 7
Can someone explain to me why Note 4 has two less screens less than Note 2?  I do not have 200 apps, around 40, but have enough to easily fit the Note 2 available screens with some spare spaces on the last screen (#7). Now, on Note 4 I can not fit them. Is the idea behind this limitations of number screens is to create folders and put the apps in them?
What am I missing?

You can always add more screens, just as you can designate which one is home.  You can also turn off Flipboard and add another screen in its place.  This can all be accomplished by long pressing anywhere on an unused area of one of your screens.  If you move all the ways to the last screen to the right, you will see a + button to allow you to add screens.  I personally use 5 with my home being the middle screen.

Similar Messages

  • How can i increase the number of screens on ipad

    I have some 5 screens on my ipad which makes a total of 100 Apps.
    Inwant to increase the number of screens or is there any limitation on number of Apps???
    I had downloaded few apps from itunes store, but they are not visible now... Might be due to some app limitation.
    Need help in sorting this out.
    ...arun

    See Page 21 Arranging your Apps here
    . http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf
    Also see > https://discussions.apple.com/message/17900594#17900594

  • I have an ipod touch 3rd generation and the whole touch screen is not working.

    I have a 32gb ipod which I bought for fifty dollars and when i bought it had a pretty baddly cracked screen but thing is it worked fine. Every part of the screen worked fine; it was as senstive where the screen was cracked as the areas of the screen that were not cracked. I dropped it a couple times from like two or three feet on two a hard wood floor about four times all it did was make the cracks on the screen a little worse. Then one day I dropped it from about a foot and now the whole touch screen is not working does anyone know why this is. They told me at the ipod store to get a new one would be 130 to trade mine in. But the thing is I very mechanically inclined and I am very good with electrionics; I was planing on buying the glass for fifty bucks and putting it on myself because I read how to do it and I am more then capapble of doing it. But now since the touch screen is now working; do I need a new screen along with a new glass? See the thing is because I think both those part cost 120 together. Which would not be worth me doing that when I can go to the ipod store and they would trade me a new one for 130 bucks. But the issue is, they told me at the ipod store they would have to look and see how damaged the ipod is to see if they will exchange it. My screen is severly cracked; also I have a dent that is a half inch long and 1/8th inch deep in the back of my ipod and its very scracthed up; do you thing an ipod store would exchange it in the condition it is in. Also has anybody had this problem before and I was wondering if it would be possible for me to take it apart and fix it my self without buying any new parts.

    If I were you, I would pay the $130 for a replacement. Then you can be sure that it has all the working parts it needs.

  • When i tried to text a message from my contact list  i received a message saying invalid number of digits. i use the area code with the number but still would not send

    When i tried to text a message from my contact list  i received a message saying invalid number of digits. i used the area code with the number but still would not send

    Call your carrier and see what they suggest.

  • Argument error; the number of columns does not equal the number of parameters.

    I am using the Database Toolkit (Enterprise Connectivity) to check for a network connection and then send information from a local database to a SQL database on the network if needed.  In development of the code I continue to receive Error 1 and the Possible Reason(s) is "Argument error; the number of columns does not equal the number of parameters."  I am using the DBToolsSelectData.VI to retrieve data from the local MDB file and the DBToolsInsertData.VI to write it to the SQL file.  The collection of the data from the MDB file is successful and the connection and validation of the table and columns in the SQL file is also successful.  The error occurs when the Insert VI tries to build the query.  The number of columns being written (attempted) does match the number of columns in the data, they are both 16 string arrays.

    Ok, it's taken a bit, and I have a solution! It took a while to figure out what the DCT is doing, but it seems to be working now.
    The reason for the original error is that you were passing into the insert subVI an array of variants - which the input to the VI coerced into a single variant. You were getting the error because as far as the insert VI was concerned you were only passing it a single data value. The way to get around that was to create a cluster with one element for each column value, convert the cluster to a variant and pass the result to the insert VI - see attachment.
    In terms of the other modifications, I made a copy of the endurance.mdb file, emptied it and used it as the destination for the copy.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps
    Attachments:
    NetworkCheck.vi ‏49 KB

  • The converted word document is not easily edited without having to correct the scewing, etc.

    the converted word document is not easily edited without having to correct the scewing, etc. The final edited document is not suitable.

    > I was able to get the first column resized and can
    > see more text, but this also reduced the size of the third column
    > automatically,
    This sounds more like Word than Indesign. I've never been able to resize
    a column in Word without messing up the column next to it. There's
    probably a way to make Word columns behave properly; I just don't know
    Word that well.
    In Indesign, to make table columns act the way you're describing, you
    must be either dragging the column wider from the left side; or (2)
    holding down the shift key while you drag. Otherwise, making a column
    wider just makes the table wider.
    Try dragging from the right side without the shift key. You can also
    select part or all of the column, go into the Table palette, and set the
    column width exactly, by numbers (which is what I usually do, because I
    like to make sure that my table adds up to exactly or less than the
    width of the text column).
    Sometimes I need to make my tables wider than the page, temporarily,
    just so I can see everything in them and decide where I can lose enough
    space to fit the whole thing on the page. Remember that you can reduce
    cell insets, as well.
    Kenneth Benson
    Pegasus Type, Inc.
    www.pegtype.com

  • Can I replace several elements of an array within one time? The number of elements are not fixed

    Hi all,
    I want to replace some elements of a 2D array, but the number of elements are not known beforehand. I dont want to do it with a loop, which may slow down the speed, and the update of elements will not happen simultaneously.  The indexes of elements to be updated are not continuous. I wonder if there is a way to do that efficiently? Do I have to programme it in LabWindows/CVI? Thank you.
    Best wishes,
    Bo
    My blog Let's LabVIEW.

    Use the replace elements function. For non-continuous replacements  of of multiple elements you would nee to iterate at least the number of continous pieces.
    For example:
    1,2,3,4,5,6,7,8,9
    Replace elements 1,2,5,6,8
    You would need 3 iterations in which you can replace (1,2), (5,6) and (8).
    Regards,
    André
    Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)

  • HT1492 I bought a new wireless Apple keyboard 3 days ago. It connects perfectly via Bluetooth. As with my old wireless keyboard, the "number one" key is not responding at all whi

    I bought a new wireless keyboard 3 days ago and the number "1" key is not responding. My old wireless keyboard did the same. What am I doing wrong with the setup or installation.

    I bought a new wireless keyboard 3 days ago and the number "1" key is not responding. My old wireless keyboard did the same. What am I doing wrong with the setup or installation.

  • IPhone 3G stuck at the Apple logo screen; will not boot!, continued

    This thread is a continuation of
    [iPhone 3G stuck at the Apple logo screen; will not boot!|http://discussions.apple.com/thread.jspa?threadID=1600894],
    which has been locked.
    The thread was too long and some browsers were timing out.
    The above link goes back to the original thread.
    Thank you.
    Apple Discussions Hosts

    Add me to the list of people furious with Apple about this problem...
    ...I have just got back from a 2 week holiday in Spain, and on day 3 of the holiday my iPhone rebooted itself and stuck at the Apple logo.
    What's more annoying, I'd purchased a data abroad plan from o2 for £50 and hardly used it because I couldn't use my iPhone because it was stuck on the **** Apple logo. o2 will not refund the plan I purchased because I had started to use it (about 2.3MB to be precise).
    Good job my girlfriend had her trusty Sony Ericsson phone because at least it WORKS as a phone, unlike this **** iPhone 3G which only has one use - as an expensive paperweight.
    Come on Apple, at least admit there is a problem and show your loyal customers that you are actually aware there is a serious problem that is causing your iPhones to become utterly useless.
    I'm seriously thinking of gettting rid of this iPhone and getting a cheap no frills phone - at least I can use it to make calls.

  • The number of details is not matching with the total count.

    Hi all, again stuck with the code.
    There is a form where i have to populate all the details of few tables in excel & there is a report where i have to make count of all these details.
    The problem here is the number of details that is populated in excel is not matching with the count in report, both have to match. There some problem in code, please help me in matching it.
    The below is the 5 tables with the columns below.
    Tables are ENQACEDTL, ENQACEHDR, ENQACMDTL, ENQACMHDR, ENQACSPEC:
    The Names mentioned below the table's name are Column Names:
    ENQACEDTL
    ENQACEHDR
    ENQACMDTL
    ENQACMHDR
    ENQACSPEC
    ENQNO
    ENQNO
    ENQNO
    ENQNO
    ENQNO
    ENQAMDNO
    ENQAMDNO
    ENQAMDNO
    ENQAMDNO
    ENQAMDNO
    ENGREF
    ENGREF
    QTY
    OFFREF
    MINSL
    ITEM
    EPREPBY
    ITEM
    BRANCH
    EINSL
    FRAME
    DEPT
    RATING
    DEPT
    MTEMP
    TECOLD
    ENGREFTDT
    ENCLIP
    MKTREF
    ETEMP
    THE BELOW IS THE SELECT STATEMENT CODE FOR POPULATING DATA IN EXCEL:
    SELECT ENQACEDTL.ENQNO, ENQACEDTL.ENQAMDNO, ......... (....ALL COLUMNS)
    FROM ENQACMHDR,ENQACMDTL,ENQACEHDR,ENQACEDTL,ENQACSPEC
      WHERE
      ENQACMHDR.ENQNO=ENQACMDTL.ENQNO  AND
      ENQACMHDR.ENQNO=ENQACSPEC.ENQNO  AND
      ENQACMHDR.ENQAMDNO=ENQACSPEC.ENQAMDNO AND
      ENQACEHDR.ENQNO=ENQACSPEC.ENQNO  AND
      ENQACEHDR.ENQAMDNO=ENQACSPEC.ENQAMDNO AND
      ENQACMHDR.ENQAMDNO=ENQACMDTL.ENQAMDNO AND
      ENQACMHDR.ENQNO=ENQACEHDR.ENQNO  AND
      ENQACMHDR.ENQAMDNO=ENQACEHDR.ENQAMDNO AND
      ENQACEHDR.ENGREF=ENQACEDTL.ENGREF AND
      ENQACMDTL.ITEM=ENQACEDTL.ITEM AND
      ENQACMHDR.DEPT=:PROC_DEPT AND
      ENQACEHDR.ENGREFDT BETWEEN :FROMDATE AND :TODATE
      ORDER BY ENQACMHDR.ENQNO,ENQACMHDR.ENQAMDNO;
    THE BELOW IS THE SELECT STATEMENT CODE FOR COUNT OF DETAILS IN REPORT:
    SELECT ALL  ACENQ.ENQACEHDR.DEPT, COUNT(ACENQ.ENQACEHDR.ENQNO) COUNT
    FROM ACENQ.ENQACEDTL, ACENQ.ENQACEHDR
    WHERE (ACENQ.ENQACEDTL.ENGREF=ACENQ.ENQACEHDR.ENGREF)
    AND ENQACEHDR.LOCKE=1 AND
    ENQACEHDR.ENGREFDT BETWEEN  :P_STDATE  AND :P_ENDDATE
    GROUP BY ENQACEHDR.DEPT;
    There is problem in join condition of 1st code that is in the "SELECT STATEMENT CODE FOR POPULATING DATA IN EXCEL":
    Please help me to sort out this problem..
    Thank You.
    Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
    Oracle Forms & Reports Builder 6i.

    As Karthick points out, we cannot help if we cannot see your correct table structures (create table statements) and some example data and expected output (insert statements would be helpful).  You're telling us there's a problem, but we cannot see what the problem is as you've not shown it.  Just saying your query is not working is like me telling you my car is not working, but not telling you what the symptoms are.  You wouldn't know where to start in fixing it.
    Why are you using Oracle 9.2.0.1 ?  Not only has that version been unsupported for about a decade, but 9.2.0.7 was the first version of 9i that was considered 'stable' as versions prior to that were considered buggy.  So you're using an old, unsupported and buggy version of oracle.  Seriously, you need to consider upgrading to a supported version, preferably at least the latest 11g version.
    And what has oracle Forms and Reports got to do with the issue?
    And please explain how you are getting your data out of Excel and presenting it to Oracle to be able to query against it.  Excel does not have "tables", so your question is completely unclear how you are querying the data from Excel.

  • I cannot sort my songs using the "plays" column (also known as the number of plays column). The number of "plays" is not increasing as a song finishes.

    The "plays" column (also known as the number of plays column) is not saving not saving the number of plays (v 11.0).

    My number of 'Plays' was not increasing anymore at some point after updating to Version 11.  I had iTunes rev 11.0.1.12.  Today I updated to the latest rev 11.0.2.26, and now the numer of plays is increasing, so they must have fixed the bug!

  • Employee Discount (from the company you work for, not Verizon employee)

    When trying to pre-order or now order an iPhone 4s while logged in to our account we get a message:
    "Employee Discounts will not be applied to this order, do you want to proceed?"
    If you say no then you exit, if you say yes then sure enough the voice, text, and data plans all are full price and do not show our normal discounts.  Order any other phone on a new line and they appear, order an old iPhone and they appear, but not on a 4s or the new 8gb 4.  I am not going to check with a 2 year contract showing a full price per month.
    If I try via the company link over at AT&T you could pre-order / order and get the company discount.  I have not checked Sprint.
    I was not expecting a discount on the phone, we never got those on any iPhone or many of the top 'droid models. I was expecting to keep the discount on the monthly voice and data dollars as we have been getting for years.
    Is this an error or perhaps the discounts are going to return after the launch excitement dies down?
    Thanks

    s2000 wrote:
    Thanks for the replies.  We are supposed to get 19% off voice and I think 20% off data. 
    The thing that bothers me is that if I choose anything except the 4s or 8b 4 then it shows me the discount on the service (none on the phone). It shows this as you pick the plans and again on the order summary screen.
    If I choose a 4s phone then (in addition to the warning message) it shows no discount on the service at all.  In addition you can't change the billing info - it is all greyed out.  Any order except 4s and you can modify the bill and ship info without a problem.
    So even though you SAY the discount should apply to the bill, I would be more comfortable it the ordering process actually reflected the discount - as it does for any other phone order.  Having a phone rep tell me the discount applies is worthless as that is not something you can take to the bank.  I guess I will wait until VZW fixes the ordering process for the 4s models...
    This same message existed during the Feb upgrades. If you search the forum you should be able to find these concerns. I upgraded and the same warning popped up. I have a 20% data discount and 16% voice discount. My discount did not disappear. Are you changing your plan during the order? If not, then changes to your account aren't being made. If you are changing to a global plan then it's possible the discounts don't apply to that (not sure if they exclude global plans) but otherwise, the discount on data and voice remains. Call CS and ask for a supervisor to get them to give you an answer so that you can be more at ease.

  • Can someone explain how data is fed to the usage details screen in My Verizon?

    Can someone explain to me how I can view my data usage for a past date today and when I look at the same date a few days from now there will be additional data. Customer support were adamant that the data usage details come directly from my device so I commented that my device must be saving usage and sending it to Verizon arbitrarily to which I was met with silence on the line.
    Here's an example - on 4/1 I checked my data usage details for the date of 3/21 and it looked like this:
    03/21/12
    08:43:00 PM
    0.02518
    03/21/12
    09:17:00 AM
    0.01475
    03/21/12
    07:20:00 AM
    0.01730
    then on 4/7 when I checked my data usage details for the date 3/21 it looked like this:
    03/21/12
    11:45:00 PM
    1.15382
    03/21/12
    11:38:00 PM
    0.24853
    03/21/12
    08:43:00 PM
    0.02518
    03/21/12
    07:50:00 PM
    1.03191
    03/21/12
    06:55:00 PM
    1.18499
    03/21/12
    06:10:00 PM
    1.03968
    03/21/12
    09:17:00 AM
    0.01475
    03/21/12
    07:20:00 AM
    0.01730
    The red rows have been added between 4/1 & 4/7, but where did they come from? This is just one example, it's happening all over my bill and Verizon cannot justify the anomaly and certainly won't consider removing the $40 in overage charges I have this month. Which brings up another question, why doesn't Verizon offer more than 10GB for the mifi? If I want to use more data and am willing to pay for it, I have to go to another provider?

    Hi kellieh,
    When you had your data overage (and the additional spurious charges), how did Verizon respond to you?
    I have just reported a 2x discrepancy between individual device data usage (.89 GB total) and the reported 1.5 GB for my account.  They claim it will take 72 hours to get back to me after they research the problem.
    What avenues did you pursue to make contact?
    I caled 611, then emailed tech support, then sent a private message to Verizon Wireless support.

  • Actual cost in the workplan task screen (hierarchy) not show value.

    Hi all,
    Could you advice me about actual cost if I want to show in the workplan task screen (hierarchy).
    Thank you.

    Well, then just check the master data setting in Query designer--> choose 0Costcenter and check the properties > choose advanced tab> under filter value Selection during Query Execution . check for these options
    1.Only Posted Values for Navigation
    2.Only values in Infoprovider
    3.Values in Master data table
    4.Characterstic Relationship.
    You need to choose the 3rd opitions as you need to read the master tables for 0costcenter.
    Hope it helps,
    Cheers,
    Balaji

  • IPhone 3G stuck at the Apple logo screen; will not boot!

    My iPhone 3G has been working all day. I rebooted it because it was hanging when trying to use some apps, and now it's hung at the Apple logo. It will not boot fully. I have tried to reboot the phone many times but I get the same problem. I let it sit there for 30 minutes and it does nothing.
    Anyone else have this problem? Any ideas on how to fix it without doing a Restore?
    Ethan

    Oh, they know! I've had all of the above issues, tried every and all remedies several times, even uninstalled and reinstalled itunes. My phone froze up totally for over 24 hours after several attempts to sync and itunes closed then I had to reset, not even an apple logo, just a dim lit screen. Went to the genius bar, they replaced my phone. The tech said apple knows and is working on it.
    Note: tried to book an appointment online, none available so I went and signed the standby list.
    Luckily someone didn't show up, because they said some people wait for hours.
    The new one is doing the same thing. I have yet to sync fully. my contacts & calendar sync OK, a few apps, beyond that nothing-no music, photos, podcasts, ringtones. Itunes hangs during syncing an application and iphone times out. the only option is to close itunes and reset the phone. Upon fully reset, maybe 1 or 2 apps are installed, nothing else. Resetting takes forever, it has frozen again with the apple logo for about 12 hours, and usually about 10-30 min each reset. I have restored the new one twice. Problem is, when it freezes up or times out, itunes won't recognize the iphone at all, it says no iphone detected.
    I am now going to restore the phone again, and not attempt to install any apps until this issue is resolved. I have already spent hours on this, and really tried everything. I would rather have my music, ringtones, photos, podcasts etc than a few apps. Shame, because i've spend at least $50 in addition to numerous free apps.
    Side note: I scheduled another appointment at the genius bar when my phone was out of commission for 12 hours, they are booked for three days in advance so the issue is still widespread. Luckily I was able to finally get itunes to recognize my phone and restore.
    Message was edited by: stephb1

Maybe you are looking for