The number range for sales documents

Hi all,
I have difined a new number range intervals, but the "current number" doesn't match with saved sales documents' number.
I guess that's because there are old saved sales documents are remained in the system which had saved before I defined a new number range intervals.
Is there any way to delete past saved sales orders so that newly defined numbers are going to be assigned?
Thank you.

To Lakshmipathi,
Thank you for your prompt reply. very appreciated.
ok, so now I understand that I can't delete saved sales orders from the system if these are important documents such as billings.
so If it's impossible to delete old documents in the system, I still need sales documents' number to match the numbers which I have newly defined.
For example, I recently defined a interval no. as below,
Interval No. From Numer To Number Current Number
Z1 010000000 019999999 010000503
I have assigned the interval no. "Z1" to a sales order type. and then created a sale order using the sales order type.
The sales order No. showed "010000504" which looks fine. But when I go back to the customizing to see how the "Z1"'s current number has changed,(I expected it to be "010000504"), I find the current number now became totally random number such as "010000913".
From here, again when I create sales orders, it is "010000505", "010000506", "010000507",,,,,and so on.
But the current number doesn't change at all from "010000913".
I'm lost and need a kind help from SAP pro.
Thank you very much,
Best regard
Misaki Nagaya

Similar Messages

External number range for Sales Document

hi,
I have a requirement to generate external number range for sales document. I tried this user exit (MV45AFZZ) to generate external number.
FORM USEREXIT_NUMBER_RANGE USING US_RANGE_INTERN.
Endform.
between these form and enform i written my logic and passing to US_RANGE_INTERN. But can one suggest where to write to generate external number range.
Can any one help me out.
Thanks and regards,
Vijay.

Hi
Here you can assign a different number range for your sales order.
The number range is linked to the order type (field VBAK-AUART), this link is done in customizing.
It usually uses this routine if it can't assign the range in customzing because (for example) for different sales area it need have different number ranges for the same order type.
So you should create an external range by trx SNRO and then assign the number before entering in the main screen of va01 or saving the document.
When you need to assign the number depends on how you want to manage your range.
If you assign the number in entering you has to make sure to not assign the same number document to severals order to be created in the same time by several useers.
Max

Year wise Number Ranges for Sales Documents

Hi,
Can any body tell me how to reset number ranges of SD Documents when fiscal year chane.
Thanks

Hi Kapildev,
   In standard functionality this function is not there you need to look forward for user exit.
   Check this:
   User exits in the program MV45AFZZ
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment
depending on the required fields. For example, if you want to define the number range
depending on the sales organization (VKORG) or on the selling company (VKBUR), use
this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
Thanks,
Swamy H P

Number range for sales document type

Hi,
I am having 1 client under that 5 company codes, ade according to that 5 plants & 5 sales organization.
so for one comapany code including all there are 15 sales document types same for other also
my question is
How can I assign number range for all that?
If i am going to maintain seperate document type it goes to 75
which userexit will help me out for this?
without userexit what is the otherway?
regards,
Rahul

Not only at order level, you will have to use exits at delivery and billing document level also.
For sales documents:
Exit USEREXIT_NUMBER_RANGE in MV45AFZZ
For delivery documents:
Exit USEREXIT_NUMBER_RANGE in MV50AFZ1
For billing documents:
Exit USEREXIT_NUMBER_RANGE in RV60AFZZ
You need to give tables for maintaining numbers for sales, delivery and billing documents. In the exit a select query can be written to fetch the data based on the parameters like sale orgainzation, company code etc.
Regards,
GSL.

Number Ranges for sales document type

Dear All,
I have four company codes. I am assigning the same sales order type for all company codes.
I want to have diffrent number ranges for diffrent company codes for same sales order type. Is this possible?
Please advise
Regards,
Deepu Pillai

Dear Deepu,
A similar kind of requirement, has been stated in to the following thread:
[Different S.O. No. Range|Re: User Exit No for assign a different internal document number to VA01;
Include Program: MV45AFZZ
User-Exit: USEREXIT_NUMBER_RANGE
In the above thread, the routine has been modified as per the requirement "Different S.O. No. as per Sales Org."
You may Discuss the same with ABAPer to modify Routine in FORM USEREXITNUMBER_RANGE_; as per the requirement: "Different S.O. No. as per Company Code"
The user exit is called up in the FORM routine BELEG_SICHERN.
You need define the number range depending on the selling company (VKBUR)
Tabl
Best Regards,
Amit
Note: For further assistance, if Reqd.:
[SD Doc. No. Range Enhancement|http://www.saptechsolutions.com/pdf/SDDocumentNumberRangeEnhancements.pdf]

Regarding number ranges for sales documents.

Dear Guru's,
There are 2 number range fields in defining a sales document(i.e Int. & Ext.).
Actually we specify either internal or external ,but if we specify both what will happen.
Thanks in advance,
Cherukuri

Hi,
The number ranges can be either external or internal. If it is external internal you need to mark it in the VN01 and at the same time delete the internal assignment number in the VOV8. If the internal assignment field in VOV8 is not blank the system will keep generating internal numbers.
If it is external no. range the current no. that is being used cannot be seen on the VN01 screen. And while creating the sales order itself the sytem will prompt you to enter a number between the available range. If you dont enter the same system will not allow you to proceed further.
Kind Regards
Chakradhar

Document Number Range for Sales Documents

Hi,
Can we maintain Same number range at company code level?
eg. client 800
company code:- X(Sales order no 1001)
company code:- Y(Sales order no 1001)
Regards,
Amol.

Hi,
You need to develop a new table for intervals and for number ranges use standard table NRIV for from and to numbers. The tabel structure as -
Company Code      Billing Type          Interval No
       1000                     F2                      01
       2000                     F2                      02
NRIV Table
    Interval No        From            To
         01            10000          20000
         02            11000          21000
But as your requirement of same series will not happen in same client.
Rewards if it helps
Regards
Goutham

User exit for VA01 - No range for sales document type

Dear Experts,
In our project, we have 8 sales organizations and these are assigned to 8 different company codes. Actually our client doesnt want to maintain different document types for each Sales Organization. We need to maintain one document type for all the sales organizations and different No ranges for each sales organization. So can any one guide me on User exit available for this purpose.
Thanks & Regards,
Rahul

hi,
pls refer to the following user exit.
Include prog : MV45AFZZ
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
reg
Deepak

How to setup number range for Material Documents created by goods movement

Hi Experts,
Good day!
Would you know what table or transaction code we could setup or configure the number range for Material Documents number created by goods movement?
Thanks. Have a wonderful day!
Rockz

Hi,
Tcode - OMBT
Regards,
Vivek

How to determine number range for billing document based on company code ..

Hi Friends!!
can anybody tell me how to determine number range for billing document based on company code & tax departure country if required??
Amit...plz help me!!

Hi Amit,
1. Define different Billing Document number ranges in SPRO -> Sales & Dist -> Billing -> Define number ranges for billing docs. (VN01). Make sure that all are internal number ranges.
e.g.
NO. From number To Number    Current number Ext
A1   0930000000    0930999999
A2   0940000000    0940999999
A3   0950000000    0950999999
2. Define a Ztable ZNUMB_RANGE as follows
Comp. Code | Tax departure country | Billing Doc Type | Number Range
100                IN                               F2                      A1
200                IN                               F2                      A2
200                US                              F2                     A3
3. In user exit RV60AFZZ (USEREXIT_NUMBER_RANGE)
Read table ZNUMB_RANGE for Number Range with Comp. Code, Tax country and Billing Doc.
If found pass this number range value to us_range_intern.
us_range_intern is a standard SAP variable which tells program which number range use to create the current document which is under process.
Let me know if you are clear.
Thanks,
Mandar

Urgent : Unable to maintain the Number ranges for Excise Groups

Hi CIN experts............
In Development server I created 3 excise Groups (E2,E3 and E4), the same I was transported to Production.
J_1IRG23A1, J_1IRG23A2 object number ranges are Excise Group specific.
When I go to Tools - Number Ranges to maintain number range for J_1IRG23A1, J_1IRG23A2 objects I didn't find these excise groups.
Im able to see these Excise groups in Tools - Number ranges in Development server, but not in Production.
Can any one guide me something to resolving the issue ?
regards
Durga Ram

Hello Nagaraju,
Can you please tell me the customozing path for maintaining the number ranges for PM log entries.
I require to mention customizing path in my document.
Puneet

Number ranges for material document (migo) and inventory documents

Hi Gurus,
We need a different number ranges for goods receipt documents and inventory documents because we have different company merged in to one box.Can any body tell me on what basis we differenciate the number ranges how to configure it.
If we take PO, we have different doc types and we assign number ranges to those documents. in case of Miro , it is the single transaction code used by different companies and how to give different number ranges.
Regards,
Sri........

Hi,
I think number ranges of inventory documents are on client level not on company code wise . because even though your creating new document and assigned different number ranges for the documents but these while assigning ranges to T codes (MIGO or MIRO) you dont have option like company codes ( tcode OMBA) so number ranges for inventory documents are at client level not at company code level.

OMX4 - FBN1 - Number range for Material document and FI document

47 - is for FI document number range in Material ledger FBN1. OMX4 gives number range for Material document. My question is how big the number range must be? Since thousands of Materials involved, I couldn't imagin this?
Anybody knows, how to determine the size of no. ranges in Material Ledger configuration? SAP simply says, check no. ranges whether it meets the requirement....
I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
Cheers,
Ashok

What is the number range you are using? Year Dependent or Independent?
When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

Number Range for Logistic Documents For Different Company Codes

Hi all..
I need to numbered the logistic documents for diferent company codes (#60) but the number ranges for al those documents should be generated separately according to each CC.
I've read in other thread that I could use the user exit MM06E003, but it seems that only works for PO. There is also a tweak for GR/GI, but.. any idea for all the other documents?
Thanks in advance.
Guillermo (Willy)

Hi
using the User exit you can change the Numbers Rnage for the LIV Documents based on the Compnay Code
LMR1M003 Number assignment in Logistics Invoice Verification
Thanks & Regards
Kishore

Define a number range for settlement documents

Hello,
We are getting below error while doing T-code AIBU asset settlement.
Define a number range for settlement documents
Message no. KD 522
Diagnosis
No number range for settlement documents defined in controlling area ACA2.
The settlement document is a document type in its own right, which is used for cancelling settlements and repeating month-end closes.
Procedure
Define a number range for settlement documents. Choose Maintain number ranges for settlement documents.
Thanks,
Ratnam

Hi......
Try to use the following T.code : SNUM,
1. Group -> Maintain and Group -> Insert
2. Give your number range a description.
3. Specify one interval for the number range. If you use up this range, you can add more intervals.
4. Select one or more of the controlling areas listed in the block "Not assigned".
5. Place the cursor on the number range to which you want to assign the selected controlling areas.
6. Use Assign element group to assign the controlling area(s) to the appropriate number range and save your entries.
Note that all intervals for the selected number range object are deleted in the target system first. After the import, only the intervals you export are present. The number statuses are imported with their values at the time of export.
Dependent tables are not transported or converted. Note that the appropriate application table is also transported for number range objects used for group maintenance.
And use :OKG6
I hope you will get some idea.
Regards
vamsi

The number range for sales documents

Similar Messages

Maybe you are looking for