The numerical instructions in tutorial ? LIKE 3:10 OR 0:36 ?? can ANYONE EXPLAIN THEIR REPRESENTATION
the numerical instructions in tutorial ? LIKE 3:10 OR 0:36 ?? can ANYONE EXPLAIN THEIR REPRESENTATION
the numerical instructions in tutorial ? LIKE 3:10 OR 0:36 ?? can ANYONE EXPLAIN THEIR REPRESENTATION
Similar Messages
-
Have an iphone 5c 8g. The home button has stopped working. Did the same a few months ago and recovered 24hrs later. Can anyone explain this problem. Phone still in warranty. Had steam issue recently but this was after last home button episode and no evidence of damage.
If you are playing in hockey arenas a lot or if you are bringing it into bathroom same time as shower it may not seem like much but overtime the steam can acquire and build up in the phones usb dock flex cable swell as the home button flex cable. Bring again into apple store and should be covered under warranty again. could also be a delay in a 8gb 5c software may just be very lag.
-
I have an iMac (Mid 2010) and am running 0sx 10.8.5 and the WiFi always loses connection during sleep mode. I have seen numerous different solutions none of which seem to work. Can anyone help?
Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved. Make sure the box marked
Remember networks this computer has joined
is checked.
2. Follow the instructions in this support article under the heading
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
3. Reset the PRAM.
4. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
5. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
6. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
7. Repair permissions on the startup volume.
8. Turn off Bluetooth and test.
9. Reset the System Management Controller.
10. This step shouldn't be necessary, but has been advised by Apple Support in some cases, apparently as a workaround for a bug. Open the Energy Saver pane in System Preferences. If applicable, click the padlock icon in the lower left corner to unlock the settings. Enter your administrator login password when prompted.
Select the Power Adapter tab and uncheck the boxes marked
Wake for Wi-Fi network access
and
Enable Power Nap...
if present. Then, if the computer is a MacBook, select the Battery tab and uncheck
Enable Power Nap...
11. Reinstall OS X. -
I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?
I went to silence my iPhone 5s and had a box pop up--looked like one of those boxes telling me turning on Location Services would help--telling me I needed to change my password within 60 minutes.....I turned the phone off. Can anyone explain this to me?
-
I downloaded the lateest update and I can't turn off my apps like I did on 6os. The 7os is different and I can't seem to find out if apps turn off now by just closing them. Can anyone explain this to me? Please
Double tap the Home button and swipe the app preview page up
iOS 7 also allows apps to run while they aren't open.
You can manage these here:
Settings > General > Background App Refresh -
I backed up my iphone 3 in preparation for moving to iphone 4S and before i changed the sim card I discovered my notes had been wiped! It looks like this is quite common but can anyone tell me where the notes I backed up on itunes would be???
In the iPhone backup. Right click on the phone in iTunes and choose "Restore from Backup".
-
I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?
Does your Mac meet Lion's requirements?
Apple - OS X Lion - Technical specifications
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Snow Leopard requirements:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation -
I am trying to buy my album. I have an English ID but am operating in Switzerland in the German part. When I go to buy book the instructions are in French and price in CHF. Can anyone let me know if I can change the language to English and order in £ and use english Id from switzerland.
All other systems set to English and i tunessee instructions here - since they are in Frencha and german I have no idea if they will solve your ptoblem
LN -
i am trying to update my husbands ipone with out deleting the information an his phone like his mail account and contacts can this be done
can this be done
Of course. That's standard behavior. -
Can anyone explain this: Numeric or Value Error Line 1
I have a stored procedure that starts out like so:
PROCEDURE test_proc(param1 IN VARCHAR2, param2 IN VARCHAR2, param3 OUT
SYS_REFCURSOR) IS
v_var varchar2(5);
BEGIN
SELECT * FROM. . .
The procedure tested fine in PL/SQL Developer. When calling from
ODP.NET like so. . .
OracleCommand cmd = new OracleCommand("test_proc", <connection>);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.Add("param1", "somevalue");
cmd.Parameters.Add("param2", "XX");
cmd.Parameters.Add("param3", OracleDbType.RefCursor,
ParameterDirection.Output);
DataSet ds = new DataSet();
OracleDataAdapter da = new OracleDataAdapter(cmd);
con.Open();
da.fill(ds);
con.Close();
. . .the procedure executed as expected. If I changed the value of
param2 to "XXX" or any value three chars long I got the "ORA-06502:
Numeric or Value Error at Line 1" error.
After beating my head against the wall for hours, I tried changing the
size of v_var to 50, and the error disappeared. Mind you, the error
was being thrown long before v_var was being set further down in the
proc. Even more interesting is that the possible values of v_var were
all less than 5 chars wide. Most interesting: the value of p_param2 had nothing whatever to do with v_var.
Can anyone explain this?Hi,
Is your database 9206 by chance? Re: Error ORA-06502 PL/SQL
Cheers,
Greg -
My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?
I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks -
After upgrading to Mavericks all my pdf's that were on Ibooks in Itunes library disapeared. It said they were moved to the new ibooks for mac app. but nothing is there. Can anyone help
Well where is your library located now if not in the iTunes folder? See the links below on what your iTunes folder should look like and put it back together:
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391
iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 -
Can anyone explain the difference between these 2 versions?
I don't understand why Version 2 works and Version 1 does
not. Both are on the main timeline, however Version 2 nests one
clip inside the other. They both display correctly, however
mouse-dragging only works on the Version 2. The events don't get
fired for Version 1. Can anyone explain what's up?
Version 1:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
Version 2:
this.createEmptyMovieClip("thisClip",getNextHighestDepth());
thisClip.createEmptyMovieClip("man",
thisClip.getNextHighestDepth());
thisClip
.man.loadMovie("man.swf");
thisClip.onPress = image_press;
thisClip.onRelease = image_release;
The handlers are defined as simple calls to
startDrag/stopDrag:
function image_press() {
this.startDrag(false);
trace("man press");
function image_release() {
this.stopDrag();
trace("man release");handlers applied to a movieclip (like your thisClip.onPress
handler) is removed when that movieclip is the target of a
loadMovie() statement. when loading is complete you can assign an
onPress handler that functions as you expect. or you can use
version 2 to target the child of a movieclip and assign handlers to
the parent. -
Working with iDVD on a project, there is a box in the lower left corner and sometimes another in the lower right corner. Scrolling over the one in the lower left corner, I get a message indicating that this box hides or shows the intro movie. I have checked and unchecked the box, but see nothing different in the project. Nor can I figure out what is meant by "intro movie." Can anyone explain?
Go to iDVD Help and type in Intro Movie, and you will get the full version of this:
Many iDVD themes have “motion menus” that include animations or video that loop, or play repeatedly, until the viewer clicks a menu button. Themes with motion menus have a motion icon in the lower-right corner.
In addition to background video, iDVD motion menus may also feature an intro, or short animation, that plays once before the part that loops. Other motion menus also include an “outro” that plays after the viewer clicks a button, serving as a transition between the menu and the selected content.
An example of an iDVD 6.0 theme with an intro and an outro is Reflection White Main. In this theme, the first drop zones appear in the intro, and the buttons and title appear just before the looping part of the background video. In the outro, everything flies offscreen after the viewer clicks a button.
iDVD provides tools for viewing these motion menus without going into preview mode, which is especially helpful when you are filling drop zones, and for turning the intro or outro off.
Here are ways to view and edit the background movie:
◼
Drag the diamond-shaped motion playhead along the scrubber bar (shown below), to view the background movie, stopping wherever you like.
(If you don’t see the motion playhead in iDVD, choose View > Show Motion Playhead.)
◼
Deselect the checkboxes at the left and right end of the scrubber bar if you don’t want to use the intro or outro, respectively, in your DVD menu.
The scrubber bar shows the intro and outro as shaded areas at the beginning and end.
You can also control the intro and outro from the Menu Info window. With your pointer over the menu (and with no buttons or text objects selected), press Command-I to open that window. Select or deselect the Intro and Outro checkboxes in the Background section of the window.
NOTE: If you drag your own movie to a motion menu background, the outro is automatically removed. To customize the background and keep the outro, use a still image in the menu background instead of a movie. -
Can anyone explain how to post the manual entries in BCS?
Hi All,
Can anyone explain how to post the manual entries in BCS?Dear,
Depands on posting level.
There is Manual Posting under Consolidation Functions.
Please creat document and task.
Next you add this task for consolidation monitor. There is "Consolidation Monitor " and you choose Hierarchy task and add your task for manul data.
In document you kind in mind: choose manula posting !!!!!!!!!!!!!!!!!!!!! in page tab Propertis under Posting!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.
If you would like to entry in posting level 01 or 10, please choose Local currency and trasaction currency +- group currency.
If you would like to entry in posting level 20 or 30, please choose Group currency.
In SEM_BCS are posting level is very important.
Regards,
anka
Maybe you are looking for
-
Hi Guys We have few payment terms for our company. Now we want to restrict payment terms based on the customer number For example Payment term Z0001 for customer group 001 ..... Is it possible to restrict by doing some configuration The next is we wa
-
whenever I take pictures with my 4s and the flash is on the picture comes out with a blue tint.. I have a case but I took it off to test that theory and it still turns up blue.. I also don't have a protective film or anything over the camera..
-
We are trying to extend the usage of Solman Service Desk for other IT related issues also for this the real challange I feel is the number of options available in the drop down while raising the ticket to choose from 1. System/IBase 2.Component of t
-
No picture, on bbc iplayer.
I have sound but no video pictures on iplayer-anytips?
-
Recently, my screen will go completely black. it seems to be pressure related but i dont really know. sometimes it will be fine. then it will just go to a black screen. If its connected to wifi i can use siri but if not it wont connect on its own. he