The oddest thing with Illustrator CS6, I have a customer's file from Illustrator CS5, I'm trying to make a gradient from Process colors to Spot colors, I've done this to the fill, but it only did the stroke, even though the color pallete shows there's no

I have the gradient with PMS 288 and PMS 2915, I see only the outside of the fill recognizing this change. I wish I could attached the file to this question.
The file is from AI CS5, I'm working on it in AI CS6.

after expanding appearance under objects, I was able to correct this gradient. I called adobe support, they couldn't help I figured this fix on my own, but still I'd like to know what kind of path this was. there was nothing applied in the appearance pallette. But once expanding I had two paths.

Similar Messages

Od classic all i'm getting on the display is a blank white screen, itunes recognizes it but is only displaying 127gb free even though it's empty and should be 148gb free

after replacing both the logic board and hard drive on my ipod classic all i'm getting on the display is a blank white screen itunes recognizes it after a restore but is only displaying 127gb free instead of 148gb. the hard drive is a brand new 160gb the logic board came from a working 6th gen 120gb ipod classic

Will,
"I thought you bought the entire display and had two LVDS cables?"
Right, but I mean I think the connector on the logic board might be detached/broken. When I tested the old display, I completely removed the new one, cables and all, and connected the old one with the original LVDS cable. So these symptoms are independent of the lcd/cables that I use.
Yes that socket could be bad and this:
Even the random distorted coloration on the cracked lcd was replaced by blank whiteness.
would point to that problem. Did you try messing with that connector when it's powered up?
I'm not sure I follow. By "completely black screen" I meant no backlight...
Detached GPU a.k.a ball grid array ATi chip:
-computer boots, with chime
-distortions in color
-flickering lines
-cycling through red, green and blue
-ultimately a blank screen (but still backlit?)
I have an ATI 9200 GPU chip that failed in a way I call "black moving shadows"
Detached U28 chip the Danes mounted a complaint about:
-computer will not boot, no chime
-loud constantly whirring fan
Right that pin 15 I talked about. Relatively easy to solder back.
-maybe will boot if clamped on left of trackpad, but with intermittent graphical distortions
No there would be no graphic anomalies in this failure and clamping left of the track pad is a problem since that's where the hard drive is. The pressure should go on U28 as indicated in the Cory Arnold site better resolder pin 15.
I guess I just want to get this all sorted out for posterity.
OK. If you hit a wall you could send it up here and I'll take a look.
Richard

Program only prints to postscript even though default printer is showing

Does anyone know how to "undo" a program or application from printing to postscript vs. the default printer. i believe i did this (in reverse) by accident in the GO To file, while trying to load my printer manually.
as well, all of my children's games that have printer applications (for coloring pages and so forth) won't print, even though the printer is set up on the mac.

Try Reset Printing System - you then need to re-add the printer in Print & Fax prefs:
http://support.apple.com/kb/HT1341

TS3579 I found this useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up

I found this (TS3579: If the wrong date or time is displayed in some apps on your Mac Learn about If the wrong date or time is displayed in some apps on your Mac) useful because I did not know about the effect of typing in data and that you could only drag to rearrange the data. I had typed in data before and this had caused problems but restoring defaults did not cause correct dates to show up in Finder.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

Problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

problem with photoshop CS6 I have an imac intel 10.6.8...when I try to launch photoshop the icon bounces a few times then the adobe app manager tries to open then they both quit. they keep doing this over and over again but won't launch. worked fine for a few days after install.

TS3276 Web through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro, but no my iMac. Connection Doctor shows all green lights.

Went through this step-by-step, but alas it did not solve the problem. For some reason I can download mail on my Macbook Pro and iPhone, but no my iMac. Connection Doctor shows all green lights. This started today when I was prompted to re-enter incoming mail server passwords. I re-entered passowrds yet again to make sure they were correct. Rebuilt the inBox. Connection Doctor continues to show all green lights, but am still unable to download mail to the inbox. Has anyone else ever run into this problem?

I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2. My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone). I was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did.

How do I place a link to a web site on my screen. I have done this on my iPhone, but don't remember how I did it. Now I want to do the same on my iPad. Thanks

How do I place a link to a web site on my iPad screen? I have done this on my iPhone, but I don't remember how I did it. Getting old I guess. Thanks.

In Safari (on the page that you want the link for) press the icon of the box with the arrow coming out of it,select the 'Add To Home Screen' option, and then chose what you want to call it (as you can't change the name after it's saved).

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. How do I get and install the right version of Camera Raw?

Adobe Bridge CS6 (Mac) won't open .arw files from my Sony RX100. I was told to update Camera Raw to at least 7.2. I tried to download this but got a DNG Converter instead. Where is Camera Raw? (it does not show up in a search of my hard drive. There is a folder of camera profiles but no extension or plug-in with this name). How do I find out what version I have already? How do I get the correct version? . . . OR . . . is it the case that Bridge will never open Sony raw files directly and I will have to do a separate conversion process every time I want to use a raw file??. Can someone explain this?
Thanks.

A Good samaritan answered this for me on another forum
How to update Camera Raw

HELP! I subscribed to imatch on my mac so that I could access the songs anywhere with my iphone. However since I live in a rural community I would like to make playlists that always stay on my phone in case I don't have service. Not sure how.

HELP! I subscribed to imatch on my mac so that I could access the songs anywhere with my iphone. However since I live in a rural community I would like to make playlists that always stay on my phone in case I don't have service. Not sure how.

I have the same issue. While I am sure your solution would work, my playlist has over 6,000 songs and hiting every song to download it is not very practical. Is there another way?
I am looking to have a subset of my music physically on my phone so that I can play it without internet access, but have access to the entire library when I do have internet access.

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

I set up my iPhone through iCloud but assigned the wrong cell number to it so I am getting messages that don't belong to me but rather to my husband as I entered his cell number in there - how do I change that number to stop this from happening??

Also, if you are sharing an Apple ID, you will get his iMessages.

TS2986 I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install. Even though it says the requirements are 10.6.6 or greater, when I try to install, it says I need 10.7.

I installed Snow Leopard, upgraded it to OS X 10.6.8, paid for and spent the hours necessary to download Lion, but Lion will not install. Even though it says the requirements are 10.6.6 or greater, when I try to install, I get a message saying I need 10.7. to install Lion. What should I do?

Hi..
Make sure your Mac meets Lion's requirements.
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OSX v10.6.6 or later (V10.6.8 recommended)
7GB of available spare
From here > Apple - OS X Lion - Technical specifications
If your Mac meets the requirements, installing the Mac OS X 10.6.8 Update Combo reinstalls the App Store for you which may help.
Restart your Mac after instaling the combo installed. It's ok to do this even though you are already running v10.6.8.
If you have anti virus software installed, you may need to disable that in order to install Lion.

I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?

I restored my iphone but now it will not power on fully. The Itunes plugin appears. I plug it in and restore as requested but the phone never restarts like it says it will. I have done this several times now but nothing. Suggestions?

Sounds like time to take it back to Apple for repair.
Allan

HT5824 I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have number

I've been using numbers for iPad and I accidentally deleted a column. And the auto-save feature saved that and now I can't undo it. Does iCloud storage have backups of saved files from like 10 minutes ago? I have numbers synced to iCloud.
I tried to undo it but the app crashed.
I am hoping there's like a previously saved version of my file in iCloud somewhere.

No, iOS does not do short term incremental back ups to iCloud such as you get with Time Capsule.It backs up when you do soo manually, or if set properly, when the device is plugged in and connected to WiFi. It will not have saved your changes as of 10 minutes prior.

In iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed?

in iPhoto how do I stop files from auto resizing as they import? I don't want my files reduced to 72. The option to choose size on the export menu not suitable for up sizing, as you can't restore the quality removed.

Short answer: They are not resizing, there is no quality lost. The dpi is only set when you decide what size you're printing at
Longer answer: Dpi means nothing in the digital world of your computer. There are no "inches" to have "dots per..." Size is measured in pixels. That's the same on your camera. It doesn't take 10 x 8 or 6 x 4 shots. It takes shots measured in megapixels. For instance 4,000 x 3,000 is a 12 megapixel camera.
Using that example, that shot from that camera has 12 million pixels. So that's how many "Dots" there are. To decide the ratio of dots per inch, you now need to decide the "inches" part. And that's printing. Print at 10 x 8 and the dpi will be 4,000/10 or about 400 dpi. At 6 x 4 then it's 4,000/6 or 660 dpi. Work the other way: Print at 300 dpi and the resulting image will be about 13 inches on the longer side.
So, your photo as a fixed number of pixels. Changing the dimensions of the print will vary the dpi, changing the dpi will vary the dimensions of the print.
For more see http://www.rideau-info.com/photos/mythdpi.html
Regards
TD

HT3728 When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I redo the factory reset.

The Time Capsule is not providing a wireless connection.
When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.

Which model TC is this? The A1xxx number from the base please.
Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
Do the factory reset.
Now check if TC comes up in airport utility..
If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
See below.
Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

The oddest thing with Illustrator CS6, I have a customer's file from Illustrator CS5, I'm trying to make a gradient from Process colors to Spot colors, I've done this to the fill, but it only did the stroke, even though the color pallete shows there's no

Similar Messages

Maybe you are looking for