The % of stograge space is LOW...

Hi Gurus
I am new with this alert, every things are okay every things are fine nothing bad.
But from last three days I got some alert on my TEC Console is that "The percentage of avalible storage space is low" on sun server. One interested thing this alert is disapper within 2-3 minutes then after 6-7 hours its appers again this routine is contunues from last three days. I checked the all storage, array its alls are looking good they had enough space.
Please any ideas...
Thanks
Mohammed Tanvir

There may be any logger intentially written for this. There might be an echo being sent. You may look for this too.

Similar Messages

Hi there, My Hard Disk space on the Mac Book is running low, I found about 105gigs in Back Ups, after I moved my ballooning Aperture Library to an external hard disk. Can you help?

Just checked on Lion - somehow I have over 100gigs in Back Ups, but much less in pictures. I moved Itunes, Aperture Libraries to my external hard Disk. Still running low on the 250 gigs space. Any tips on how I can free this are much appreciated!
Thanks!

Did you actually move / delete the data on your HDD?
When you click and drag to an external drive, it automatically copies instead of moves.
What are these backups & their location?
You could try and app similar to WhatSize.

Prevent automatic removal of the Spotlight index due to low disk space

I am guessing that when disk space runs low, it automatically deletes the Spotlight index to make room for virtual memory. Then when space becomes available it reindexes. But I'm not sure about that.
Since my MacBook Air SSD is only 128 GB, I often work with little free disk space and the re-indexing drives me crazy.
I tried to disable Spotlight, remove its index and reindex. Also check filesystem and repair permissions. In diagnostic reports (~/Library/Logs/DiagnosticReports/) nothing about reindexing is mentioned.
You can say that I should control the amount of free space but also should be another way. Disabling Spotlight isn't the option.
Crosspost: http://apple.stackexchange.com/questions/37321/prevent-automatic-removal-of-the- spotlight-index-due-to-low-disk-space

You can say that I should control the amount of free space .....
Then I will
See if you have Time Machine Local Backups taking up space, and turn it off with:
sudo tmutil disablelocal
Also consider turning off hibernate mode
I am guessing that when disk space runs low, it automatically deletes the Spotlight index to make room for virtual memory. Then when space becomes available it reindexes. But I'm not sure about that.
Not sure if that's the case, but low disk space can be causing issues. What % of your HD is free?

"Available disk space running low. Shuttting down session."

I've been running into problems on a few machines that I have installed e-Load on. When I start the stress test, I get into a few iterations and then suddenly, the test will stop running and I get the following message:
"Available disk space running low. Shutting down session."
Questions:
1.) What space is it referring to? The local machine or where the scripts are stored?
I can't seem to figure it out. The machines have more than enough space where e-Load is installed, over 10 Gigs free.
The scripts (repository) is on a shared network drive and that has 17 GB where the results are written to. Is there something I am missing?

And the following output from the bin directory:
Microsoft Windows [Version 5.2.3790]
(C) Copyright 1985-2003 Microsoft Corp.
D:\Empirix\EmpAppServer\bin>dir
Volume in drive D is Application
Volume Serial Number is DC63-8FB3
Directory of D:\Empirix\EmpAppServer\bin
12/06/2007 10:43 AM <DIR> .
12/06/2007 10:43 AM <DIR> ..
08/03/2007 08:08 AM 267 adminclient.bat
08/12/2004 09:09 AM 3,638 admin_icon.ico
09/12/2005 02:48 PM 185 cleanup.bat
08/03/2007 08:08 AM 409 consoleclient.bat
08/03/2007 08:08 AM 344 counterclient.bat
08/03/2007 08:08 AM 222 dsclient.bat
09/12/2005 02:48 PM 130 eload.url
02/10/2005 04:47 PM 3,638 eloadurl.ico
12/05/2007 07:26 PM 1,048,576 eload_ml.dat
09/12/2005 02:48 PM 3,638 eload_play.ico
09/12/2005 02:48 PM 3,638 eload_stop.ico
03/15/2006 03:07 AM 779 EmpirixSupport.bat
03/10/2006 03:54 AM 438 JbossService.bat
12/06/2007 10:43 AM 4,710 JBossService.conf
12/05/2007 07:26 PM 4,615 JBossService.conf.bak
09/12/2005 02:48 PM 135,168 JBossService.exe
09/12/2005 02:48 PM 884 log4j.properties
02/21/2006 05:26 PM 1,836 profile.dtd
08/03/2007 08:12 AM 45,056 QuickConfig.exe
06/13/2006 05:48 PM 308 QuickConfig.ini
12/10/2007 07:48 AM 16 randomness.dat
05/02/2005 08:28 PM 33,305 run.jar
05/02/2005 08:23 PM 4,854 run.sh
12/06/2007 11:47 AM 0 StopStart.log
24 File(s) 1,296,654 bytes
2 Dir(s) 124,410,523,648 bytes free
D:\Empirix\EmpAppServer\bin>

Disk space running low... but not really.

I installed Arch on a 150Gb HD lately and I'm experiencing a pretty annoying thing regarding available space on the drive.
Here is some info:
fdisk
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 79 530145 82 Linux swap / Solaris
/dev/sda3 80 19457 155653785 83 Linux
ncdu
5.2GiB /home
1.3GiB /usr
. 250.6MiB /var
82.0MiB /lib
. 11.2MiB /boot
10.5MiB /sbin
. 6.0MiB /etc
3.9MiB /bin
164.0kiB /dev
20.0kiB /tmp
4.0kiB /media
! 4.0kiB /root
. 0.0 B /proc
0.0 B /sys
0.0 B /srv
e 0.0 B /mnt
e 0.0 B /opt
Everything looks good so far and I should have plenty of space left on the device to play with. But using Thunar in xfce I am told that I have only 350Mb free. This is confirmed by the df command and I can see that I have a huge kcore in /proc.
df
/dev/sda3 7655940 7267696 388244 95% /
udev 10240 164 10076 2% /dev
none 1033064 140 1032924 1% /dev/shm
/dev/sda1 101105 13014 82870 14% /boot
ll /proc
-r-------- 1 root root 1065349120 Mar 6 13:08 kcore
Now, I understand that the kcore file is a virtual file that really doesn't affect my available space. But yet, it does affect how eg Thunar operates as it doesn't let me use the gigabytes of free space that I should have available.
I like the simple partition layout that I'm using, but is there some way to let the system ignore kcore and show the correct available space? Or am I forced to reinstall and use another partition scheme and work around the kcore size?
Usually I use ext2/3 but this time I thought I'd try jfs. Can that have something to do with this fenomenon? I have never seen this before...

Hi,
“However the disk space on 'D' is running low everyday.”
Base on my experience, it most possible is your application cache full the disk space, or you have configured the unsuitable VSS back up schedule.
The related KB:
Modify or Stop an Automatic Backup Schedule
http://technet.microsoft.com/en-us/library/cc754054.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Receiving an automatic notification from Windows Server when disk space is low

Hello,<o:p></o:p>
Does Windows Server 2012 R2 have any such functionality built-in to enable monitoring of disk space?
We have an old VB Script file that sends me an email when disk space gets low.
Also, the following post discusses the topic regarding Windows Server 2008:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c9878861-6ba5-4d3b-b6b0-6e4b33c41853/notification-when-low-disk-space?forum=windowsserver2008r2management
I was wondering if there was any change regarding this in
Windows Server 2012 R2 .
Many thanks.<o:p></o:p>
Keith<o:p></o:p>
R K Howard

Hi,
Windows Server 2012 stays the same on that topic, you still need some kind of monitoring on your disk space.
If you don't have a monitoring solution, like for example SCOM, you can for example with powershell do what you earlier did in VB script. Either you have a scheduled task that runs as often as you'd like, or you can utilize something called WMI eventing
to trigger on an event 'disk low' but thats a bit more complicated.
See below examples on some example scripts that you could use.
https://www.simple-talk.com/sysadmin/powershell/disk-space-monitoring-and-early-warning-with-powershell/
http://technet.microsoft.com/en-us/library/ff730927.aspx
http://gallery.technet.microsoft.com/6e935887-6b30-4654-b977-6f5d289f3a63Hope
this helps you!
//Johan
Microsoft Certified Trainer
MCSE: Desktop, Server, Private Cloud, Messaging
Blog: http://365lab.net

Lightroom 2 keeps reporting "disk space is low" ... and it's *not* low...

I have a 2.0 terabyte RAID-5 disk array, of which approximately 1.5 TB is free. At periodic intervales, LIghtroom 2 reports "disk which contains your Lightroom catalog, is low on space," and requests that I try to free up 20MB.
Heeeeeeeelloooo, Lightroom2. 1.5 TB > 20 MB.
What could be causing this? Vista reports 1.5 TB free. So does the RAID controller. Only Lightroom seems to be panicking.

I also experienced the "low space" warning. I was told that it had to do with the amount of free space being a multiple of (or at least ending in a particular number). If Lightroom sees that the free-space figure ends in a particular number, it chokes and gives you the "out of space" error.
To get around this error, I created a temporary folder into which I copied ~100MB of images. This altered the free-space figure just enough that I stopped getting the error. After my next photo import, I deleted the temporary folder.
Hopefully this issue is resolved before I hit another "trigger number".

PLEASE HELP!!! disk space is low message

i received a disk space is low message as i am working in my lightroom 5. i keep clicking ok and it does not let me get out of this screen. it is telling me i need to remove files or empty trash to make space. do i need to make space in lightroom or on my hard drive? please help, i have had this issue before.

25% seems pretty arbitrary and unreasonable.
With today's drive that means on a 2TB drive I need to keep 1/2 TB free. That means I am paying for 2TB with only 1.5 usable just to use LR. In my case where I have four 2TB drive I have to have 2TB free or equivalently have an entire drives worth of space (4*500M) I should not be using.
Even given that was true I get a similar message and it states I do not have at least 20M free on the drive where my catalog is. The drive where my catalog is has 800M+ of a 2TB drive free (exceeding the 25% rule).
And if you are talking about just the "C:" or "root" drive then I have a 250G drive with over 180M free. And neither my catalog or my pictures are on it.
Still looking for an answer.
It is very annoying to be in the middle of an edit and have the message pop up and stop the edit. Then you have to clear the message, undo the incomplete edit and start over hoping the message does not come back.
Any additional suggestions?

MOVED: I have no sound /the sound level is VERY low: MSI K9MM-v

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=115320.0

Go to Control panel, Administrative Tools, Computer Management, Disk Management and allocate remaining disk space.
OK, i can see around 22 GB of unallocated disk space. i will allocate the remaining disk space.
Check Volume from mixer settings, cable connections, Volume on your speakers.
I have checked and i've the sam problem. the volume in my speakers is maximum and no change. the sound level is VERY low. My speakers works because i have the test in my other PC.

A workaround to get open documents in different Spaces to the allocated PS space

A small workaround for Spaces CS5 Mac.
If you have CS5 documents spread over different Spaces due to clicking them in the finder and want to get them all back in to the allocated PS Space, here's a workaround.
You do need one doc open in the correct space I'm afraid for it to work. Create a new doc in there if you have to. I tend to leave one small doc open in the right Space all the time now.
Go to the allocated PS space. Select the menu option "Consolidate all to tabs" from the Window>Arrange menu.
This will bring all the open docs from their spaces to the correct space as tabs.
That might be enough for you but you can't drag adjustments layers and layers with alphas etc to another doc in Tab view, something I do all the time when I'm retouching 20-30 shots and I'm trying to match them.
Hard to do that with tab view obviously.
Next select "Float all in windows" and you'll have your docs viewable, side by side in the right space.
If you assign a key command to those options, it becomes a quick tap 1-2 and you're done.
As far as I can tell, if you want floating windows, and all your docs in the right place, and don't want to open your images from the PS open dialogue (who does when you have 6 windows of 50 images on your dual 30" monitor setup?) then this will do it.
It's not great for all things but it's better than "It's all Apple's fault"

there is certainly no built in way to do it. In fact Dock Spaces is the only program I've ever heard of that allows you to have different docks in different spaces. if it can't do it, it's impossible.

Why is it that when i tap a song in my music it plays the song 2 spaces above it?

My iPhone 5 was almost out of storage so i was clearing music (not using data cable connected to computer) and when i started playing a certain song instead if playing that song it played the song 2 spaces above it. Can someone please tell me whats wrong, and give me a solution?

Hi m.cohen1220,
I apologize, I'm a bit unclear on the exact nature of the issue you are describing. If it is consistently selecting something away from the location of your tap, especially if it's happening in multiple apps, you may have an issue with the display response. You may find the troubleshooting steps outlined in the following article helpful:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Regards,
- Brenden

I've noticed on my new ipad 4 that many images when on the Internet are blurred and low resolution why is this? Because if you go on apples website everything is crystal clear????

When using my new ipad 4 retina display when on the Internet many of the images are blurry or low resolution? But if you go on apples website everything is crystal clear?? Why is this?

Ebay images look fine on mine. Image zoom doesn't work, but that's not suprising. I also support a number of public and private websites wth a number of images (some pretty large). Those look fine as well. If the Apple website looks good, there is no raeson other sites shouldn't as well.
For eBay specifically, I'd recommend using its app, but in general, you could try a reset: Simultaneously hold down the Home and On buttons until the iPad shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the iPad back on using the On button. In some cases it also helps to double click the Home button and close all apps from the tray before doing the reset.

How to delete the file with space in name

Hi
I want to delete the file "test ex.txt" file.
i run the following command in command prompt.i can delete the file successfully.
/bin/rm -f /mnt/"test ex.txt"
I want to run the command from java.So i am using the following code
String cmd = "/bin/rm -f /mnt/\"test ex.txt\"";
Runtime rt = Runtime.getRuntime();
process = rt.exec(cmd);
The file was not deleted.
How to delete the file with space in name?
Help me

Use the form of exec that takes an array of command + args.
arr[0] = "/bin/rm"
arr[1] = "-f"
arr[2] = "/home/me/some directory with spaces";Or use ProcessBuilder, which is the preferred replacement for Runtime.exec, and which Runtime.exec calls.

How can I find out the percentage of space taken up by a vector in a document?

Hi all,
I've been doing visual research over the last couple of years, and part of this has resulted in hundreds of in-design documents with vectors of varying sizes in each. Essentially, I'm hoping to find a quick way to find out the percentage of space occupied by these vectors. I can't figure out how to go in to each document and find the info on the selected vector. I know that Photoshop has options to see pixels when using selection tools, but I've found this both cumbersome and inaccurate.
Any ideas would be greatly appreciated!
Cheers,
Kevin

java.io.BufferedReader in = new java.io.BufferedReader( new java.io.FileReader( "YourFile.txt" ) );
int lineCount = 0;
while( in.readLine() != null )
lineCount ++;
System.out.println( "Line Count = " + lineCount );

I set the reserve disk space to 6gb, then chose Autofill from a playlist, but my iPhone 4s says only 14.4 mb is available

How can I ensure that I enough memory to take photos on my iPhone. I usually use about 1.5 gb for photos, so I set the reserve disk space to 6 gb, but then after I did an Autofill of music, my Settings said I only have 14.4 mb available (and almost the same number of songs that I had before the Autofill). What happened? My main goal is to leave room on the phone for lots of photos while I am on a backpack trip (I cannot download them to somewhere and then erase them). I do not mind deleting music to make room for new photos.

I find it VERY hard to believe you only have 2.5 mb of interent usage per month. I'm guessing you meant 2.5 gb. Regardless, 2.5 mb or even 10.4 mb is almost nothing. Any "casual" usage could easily meter right past 10.4mb.
If you truly only have 2.5mb of usage, I suggest you ONLY answer the phone. NO text messages, especially with graphics.

The % of stograge space is LOW...

Similar Messages

Maybe you are looking for