The Official Word on Firewire and USB 1.1

Not sure when this came up but apple has released an official chart of connectivity options available on all past and present Ipods. As well as OS and Itunes version requirements. Check it out! http://docs.info.apple.com/article.html?artnum=60971

the new video ipod is awesome. BUT - I am so bummed that there is no firewire support. Don't like USB except for printers... UGH
well for everything great about this little guy - it is a small price to pay

Similar Messages

How do you reset the firewire and USB? My ports are intermittent. I suppose

How do you reset the firewire and USB ports? My ports are intermittent. I suppose it could be a hardware isssue, but still wonder if I can reinstall/reset the software without reformatting my drive.

Hello! Resetting the ports is done by resetting the pmu. press the button once with all external cables unhooked. Below is a pict of an example of the pmu location. Also an intermittent problem is often a bad cable. Tom
[IMG]http://img470.imageshack.us/img470/1623/mddlogicbd4ga.jpg[/IMG]

Journaling External FireWire and USB 2.0 Hard Drives?

I have several FireWire and USB 2.0 Hard Drives which I have always formatted as "Mac OS Extended (Journaled)".
I have been told that journaling is a waste of time with external HDs and, if anything, will slow them down slightly.
What is the general consensus on this forum?

Thank you for the swift response Malcolm.
I better explain why after all these years I am having doubts.
I am awaiting the delivery of a new piece of kit - a Western Digital HD TV Media player. Basically, you put your hi-def videos (H.264) on a USB 2.0 HD, plug it into the media player which is then plugged into your HDTV.
I have got hold of the manual which says that the supported USB file systems are "FAT32, NTFS and HFS+ (no journaling).
So I was wondering whether I will have to format the HD without Journaling to make it work?

Seeking reliable firewire and usb 2.0 combo cardbus card

Subject line says it all, or mostly so. I have an IoGear GUF202 pcmcia card with two USB 2.0 ports, one six-pin FireWire port, and one four-pin FireWire port. Its USB 2.0 services are not reliable; sustained transfers freeze my 1Ghz Titanium PowerBook G4. I've seen online several other cards from different manufacturers with the same form factor, but haven't yet found one with the preferred NEC chipset for USB services.
Can anyone offer a recommendation -- and a source? Swapping separate FireWire and USB 2.0 PC cards is becoming a pain.

Hi Jamie,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Firewire and USB not usable

my friends machine is no longer using devices connected to the firewire and USB ports. Here is the description of troubleshooting steps so far. Any other suggestions?
--- snip ---
suddenly my G5 tower stopped recognizing any firewire device... no harddisk no soundcard.... also the same harddisk is not recognized via USB....
BUT.... the USB ports recognize USB sticks, mac keyboard, mouse.. no problemo.
also.. at the same moment the built in soundcard (mac av) stopped working, AND the internal CD drive !!!
i tried : flashing the PRAM ... on boot up hold down command, option, P, and R until the machine reboots it's self then let off the keys...
and; resetting the PMU:
1. If the computer is on, turn it off.
2. Disconnect ALL cables from the computer, including peripherals and power.
3. If possible, move the computer to a place where you are not standing on carpet.
4. Open the case and ground yourself by touching part of the metal frame inside the computer.
5. Find the Cuda or PMU button
6. Press the Cuda or PMU button ONCE. Do not press the button more than once before starting the computer up again.
7. Wait 10 seconds, then reconnect the cables you removed in step 2 and turn the computer on.
and i tried: resetting NV-RAM
Re-start holding the O,F, option, and command keys until a white screen is reached, this will be the open firmware
screen. You will be prompted to release keys at this point.
Type in the command line, reset-nvram. Press enter, next command line type in, reset-all and the computer will re-boot.
so.... i have no more solutions at this point !!!

gromit95 wrote:
replaced battery did not fix problem
condition of new battery questanable exp date march 2010 but it was a new battery
fred
That date code was probably the build date code, rather than the expiration. This would be true for either the Tadiran or Saft batteries. The lithium batteries have a shelf life of up to 10 years.

Firewire and USB ports not recognizing devices

All of a sudden, some of our MacBooks don't recognize firewire and usb devices. It's weird, but after about a week, one of the MacBooks suddenly started recognizing a video camera, again, but it's troubling because my users need to be able to import movies and pictures from digital devices.
We ran the updates, and it did not help. We have been using these devices with our MacBooks for over a year, and this happened at the worst possible time. Any ideas?
I've tried both self- and AC-powered devices, rebooted, powered off and on, made sure everything is plugged in, etc.

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

Firewire and USB PCI Upgrade for PowerMac G5

Firewire and USB PCI Upgrade for PowerMac G5
I am looking to add more Firewire 400 and USB 2.0 ports to my Dual 2.7 PowerMac G5. I don't need a combo card (two separate cards is fine). I was wondering which brand card works well with my Mac and OS X. I had a FireWire card that I moved from my Dell to my PowerMac but had a number of problems with a couple connected HDD's and Final Cut Pro. The card which I think was from Belkin was listed as OS X compatible on its packaging.
Thanks for any guidance.
- Lou

Check out OWC/Macsales. Usually can't go wrong with Sonnet or an OWC "house branded".
http://www.macsales.com
Check out user reports for PCI G5 Compatibility
http://www.xlr8yourmac.com
I've used OWC FW800, Aaxeon PCIe, and a number of Sonnet USB2 (and combo).
Depends on how many USB2 ports, but for FW400 and USB2 combo should do fine. With FW800 I'd go for independent cards.

Firewire and USB

In my process of researching to buy a new Intel Macbook I've discovered that there is only one firewire port, two USB 2.0 ports, and no pcmcia port.
Here's my problem. This laptop will replace my old powerbook that I use for recording audio. I need one bus for audio to enter the laptop and one bus to access my external hard drive to write the audio. I currently have a firewire bus card in the pcmcia slot and use the firewire port for the other bus on my powerbook. This optimizes the amount of data that Logic can process. My worries with the new macbook is that USB 2 is typically slower than firewire. So using the firewire and USB 2.0 ports may slow me down. I know the old powerbooks with USB 2.0 had issues with the USB 2.0 bus being really slow compared to PCs. Was this problem ever fixed? Does anyone have any experience with this or any suggestions? I know I could just buy a macbook pro, but I really didn't want to spend that much money.

Actually there's more than just another FW port. It's a FW800 port, ExpressCard/34 expansion slot, faster and better GPU with more VRAM, faster CPU, more RAM, bigger hard drive, and higher resolution screen.
You're buying a business computer. That means you are making an investment. You can write off the investment which reduces taxes. Doesn't it make better sense to be dollar wise rather than penny foolish? Over a three year write-off period you're bartering over $250 per year.
The MacBook has no expansion future whereas the MacBook Pro does.
However, this is ultimately your decision. All I wanted to do was point out the benefits of the MBP over the MB. I should probably stop here lest I sound like I'm making a sales pitch - which I'm not. I own a MacBook and two MBPs. I like them both.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

HT2494 How do I output video to a projector from my MacPro17 with only firewire and USB ports?

How do I output video to a projector from my MacPro17 with only firewire and USB ports?

No Mac Pro only has Firewire and USB. Perhaps you've misidentified the computer:
http://www.everymac.com/ should help.

IPod dock connected to both firewire and usb at same time

I have 3 ipods, 3G 4G 60gb photo 5G 80gb vid. I have a 5G doc and a dual usb / firewire cable. I prefer to manage my 3G and 4G using firewire as it is oh so quicker. However 5G requires usb2 only. I have a Apple 'dual' usb/firewire port cable that at the moment to use I alternate which socket is plugged into the front port of my PowerMac G5 as they are the only spare ports I have.
I just bought an Iomega Ultra Max which comes with a built in firewire and usb hub that means i now have enough ports to dedicate one of each to the ipods but want to use only one dock and so I would like to plug both the firewire and usb iPod cable into the hub and leave them there connected to the iPod dock. I know it won't cause problems when the 5G is connected as there is no hardware for firewire connection. But the 4G has both.. will I encountering a usb and firewire conenction cause problems and possible damage to the ipod or my PowerMac G5, will the 4G ipod use firewire in prefeance to USB if it will work???

Hi iPodista;
I would recommend very strongly that you don't even attempt do this. Generally cross connecting in this fashion is a very good way to get yourself into serious troble.
Allan

Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

Last night I downloaded the latest Word update. Today the first Word document crashed and I lost 45 minutes of work in spite of having saved the document numerous times. Why is Word crashing the day after a safety update? I have Office 2008 for Mac

One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons
Open Console in Applications>Utilities, check the system log for the date/time of the last problem & next startup for clues.

HT4060 Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port?

Can I use the power cord (30-pin and USB) that came with iPad 2 to charge it in my car's USB port? Or do I need to purchase one of those cigarette lighter charging devices? Thanks!

You'd have to read your car manual but chances are it won't put out enough power for the iPad. The car is likely set up to charge a phone, most of which typically want half the power an iPad wants.
I think your options are to get a cigarette lighter looking charger, making sure it's powerful enough for an iPad...or you can get power inverters for about $25, where they plug into the cigarette lighter/power point and have a normal household type outlet on the other end. Then you'd just plug your charger in like you would at home.
Another option would be to look for something like a Zagg Sparq, which is a battery operated charger...plug the Sparq into the outlet at home. Its battery holds a charge and you can use that to charge your device. (zagg isn't the only manufacturer of such a device, Targus has one as well). Just look for portable chargers.
The key to remember is to make sure it's rated for an iPad, which will want more power than a cell phone.

IPod Touch question about Firewire and USB cable

I just bought a USB 2.0 extension cable on ebay to charge my 64 GB iPod Touch. I also bought a USB wall socket that I was going to plug the extension cord in to (I haven't received the wall socket yet). Come to find out when testing the extension cord on my laptop I get the message " charging is not supported with this accessory". I thought that was the case only with firewire cables. But this is supposed to be USB 2.0 What's the deal? Can a firewire cable look like a regular USB cable? And does anyone have a work around that I can use?

I realized yesterday that I had another USB wall jack which I use at work to charge my IPT. I took it home with me plugged it into the wall and tried to charge the IPT without the USB extension cord, and it worked fine. When I connected the USB extension cord, I got the same message, "Charging is not supported with this accessory." I'm so frustrated. Mainly because I don't understand what is causing this issue and therefore don't know how to remedy it. I would buy another extension cord, but I don't know if that one will work either.
Here is the link to the USB extension cord that I purchased on ebay:
http://cgi.ebay.com/USB-2-0-Extension-Cable-A-MALE-A-FEMALE-Cable-10-ftW0QQitemZ230386095770QQcmdZViewItemQQptZLH_DefaultDomain0?hash=item35a414d69a

Seagate 7200.8 (firewire and usb) won't unmount

I have a Seagate 7200.8 300 GB PATA hard drive that won't dismount. I have 3 different brands of external firewire/usb cases and this particular hard drive just won't dismount while installed in any of them and it doesn't matter if I have it connected to firewire or usb. When I drag it to the trash nothing happens and the drive stays mounted. If I then turn it off I get the message warning me about all the bad things that will happen if I don't dismount first. The only safe way I know of to dismount it is to shutdown the mac and then turn off the hard drive. This is on a Powermac G5 Dual 2.0 (PCI, 4 ram slot) with 2.5 GB ram and a single internal 250 GB hard drive running 10.4.3 and all current updates.
Powermac G5 2.0 Mac OS X (10.4.3)
Powermac G5 Mac OS X (10.4.3)

send it to a data recovery company if you don't have a backup. If you dont have a backup, you'll wish you did when you see how much money it costs to retrieve data off a damaged HDD (if they can even retrieve a portion or all of it). Google "hdd data recovery" for lists of companies.

790GX G65 Firewire and USB problem

I've m-audio firewire 410 sound card and cubase5 (has a usb dongle to work)
before this mainboard I was using K9A2 platinium V2 and Amd 9950 cpu everything was working perfectly
now I've upgraded my board (as you see) and bought a AMD 955
now when I install the sound card driver it's making somekind of digital distortion and also the sound is moving to faster or slower (all the time) so I'M hearing funny voices
The Cubase5 Usb dongle is having some connection problem. It force me to change the usb port everytime I start cubase
I've updated my bios but guess what.... They're still with me.
Please some help
I'm using Vista home premium 32, I've tried it on Xp and windows 7 64 RC7100 the resoult is always the same

Quote from: Bas on 19-July-09, 16:39:47
Are the energy settings properly configured for USB and the CPU?
Could be Cubase doesn't like Cool & Quite?
Can Cubase work with quad-core?
Can the powersupply handle everything?
What is in your system, we don't know much: >>Posting Guide<<
Read the guide this time.
My system is
MSI 790GX G65 , AMD 955 BE, Corsair 1600 MHZ 4 GB (TW3X4G1600C9D) , 6 HDD (one is IDE), ZOTAX 9800 GTX+, 750 watt PSU(corsair TX750W)
I've some pci card for my music buss. but i didn't install them yet. Not before everything works fine
Cubase works fine with quad core , my ex-system was a quad core.
the problem with cubase comes this way. I turn on the pc (dongle is on all the time) start cubase and get the message "Connection problem with dongle change the usb port) after I change it everthing works fine. infact I'm not making cubase problem a big deal. my real problem is firewire.
About the energy settings, I didn't change anything on mainboard, why do I need to change the power settings for usb? aren't they standart?

The Official Word on Firewire and USB 1.1

Similar Messages

Maybe you are looking for