The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
Troubleshooting.
3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
4.These errors are most often fixed with the latest
video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
e error persists. If the problem is printer related, try another printer.
5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

Similar Messages

  • When I go to About This Mac and click on Storage it shows 421.93GB as Other. This only leaves 46.85GB of 499.25GB free. How do I find out what this "Other" is so I can remove the stuff I don't need?

    When I go to About This Mac and click on Storage it shows 421.93GB as Other. This only leaves 46.85GB of 499.25GB free. How do I find out what this "Other" is so I can remove the stuff I don't need?

    What kind of use do you make of your MBP?  A lot of photo or video?  If so, you may be storing a lot of large files.  Look at Finder and see what the file system looks like.  Do you have large libraries of data files associated with applications?
    You may want to think about an external hard drive to use for backups and data storage, you can point applications to the external drive as the default storage location.
    A good source of external drives at a reasonable price is the Mac specialist, OWC, http://www.macsales.com
    I bought their Mercury Elite Pro 2 TB dirve last September and set it up to use part for Time Machine backup and part for other work space.  Setup with Disk utility into two partitions is very quick and easy.  Just remember to format as Extended Journaled with GUID partition table.  Setting the partition sizes is by using a braphical image on screen in DU so it is like falling off a log, so easy.

  • HT4623 I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do n

    I updated my ipad but had to skip the update to the icloud because it was not finished within 2 hours. The ipad worked fine then, but I turned it off.  When I tried to turn it on again, it kept asking for the password over and over.  What do I do now?

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I came to Apple Store fix my iPad and they told me the only thing they can replace it for $254 but I forgot to ask Wich  iPad they would replace it with I have the iPad 1

    I came to Apple Store fix my iPad and they told me the only thing they can replace it for $254 but I forgot to ask Wich  iPad they would replace it with I have the iPad 1

    I concur with Ralph; while you can get your iPad replaced, I likewise suggest you consider putting the money toward a newer iPad. Apple has some good deals on refurbished iPads in the online Apple Store you could check out. Depending on what is wrong with your current iPad, you might be able to sell it to someone for parts - eBay is the most likely venue - and recoup some additional money to put toward a newer iPad. I'd recommend a 3rd-generation iPad if you can afford it, though the iPad 2 will still run the most recent version of iOS.
    Regards.

  • I just purchased a new iMac, and can't get into my Wordpress blog. The username and password work on my old Macbook, iPhone4, etc, and all my other password-restricted sites are accessible...just not Wordpress. Ideas? New to all this...

    I just purchased a new iMac, and can't get into my Wordpress blog. The username and password work on my old Macbook, iPhone4, etc, and all my other password-restricted sites are accessible...just not Wordpress. Ideas? New to all this...Thanks! JP

    Try holding down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. The default location for your iTunes library is in C:\Documents and Settings\Username\My Documents\My Music\iTunes\ (or C:\Username\Music\iTunes\ in Vista). Look in there and see if you have more than one library file (they have the extension .itl) If you have more than one try opening them in turn, you may find your original library is still intact: How to open an alternate iTunes Library file

  • Oradism not set up correctly error in the alert log in 9.2.0.4

    Hello,
    I have installed 9.2.0.4 patch on top of 9.2.0.1 database.
    The O/S is Solaris 5.9
    The database is set to work with:
    workarea_size_policy=AUTO.
    The database is not working properly – compared to other machines we have.
    After looking in the alert log I found the following error popping after restart:
    WARNING: -------------------------------
    WARNING: oradism not set up correctly.
    Dynamic ISM can not be locked. Please
    setup oradism, or unset sga_max_size.
    [diagnostic 0, 16, 5001]
    I found the following two notes on the subject, contradicting each other and also contradicting the status of the machine:
    Note:151222.1
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=151222.1
    Telling me not to do the below procedure on 9.2.0.4, though I get the same error and miss the required etc entries specified.
    Note:262886.1
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=262886.1
    Telling me to copy oradism.sav to oradism and I already have those.
    Can you please supply a full and DETAILED procedure regarding what should I do, in case it is not a procedure, please specify how I should solve the ‘oradism not set up correctly’ error.
    Tal Olier
    [email protected]

    Hi Tal,
    Just looked at the notes you referred to. The first doesn't apply to 9.2.0.4. as you state. The other note is for 9.2.0.4e (note the "e", stands for embedded). This "e" release is not what you have, so that note doesn't apply either.
    The AR that I referred to is for 10g, but the 9iR2 info is the same. You need to make sure that $ORACLE_HOME/bin/oradism is owned by root.

  • I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number

    I cannot locate my cs6 redemption code and I just purchased a new computer because my old one doesn't work anymore. How can I get my photoshop on this computer? All my other products are registerd with a serial number

    The activation servers for CS and CS2 stopped working and were taken down. You'll need to take a look at this link for your issue: https://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.ht ml
    Benjamin

  • Redeemed the iTunes gift card it gave an error: The gift certificate or prepaid card code you entered has not been properly activated.

    Redeemed the iTunes gift card it gave an error: The gift certificate or prepaid card code you entered has not been properly activated.

    do you have the receipt from where you bought it? If so take it back and see what they will do for you.

  • Iam Running an Application it is running and working fine in Firefox where as Chrome pushing an error stating "Object reference not set to an instance of an object."

    Iam Running an Application it is running and working fine in Firefox where as Chrome pushing an error stating "Object reference not set to an instance of an object."

    This forum is for discussing technical documentations on Microsoft's web site.
    If you need help with an app, contact its author.
    Visual C++ MVP

  • I have turned on home sharing but the house icon does not appear. Have read a blog that says it is not set up correctly am i missing something here?

    I had home tuning running fine on my mac. Since introducing apple tv the home sharing house icon is missing and will not allow me to drag and drop from home sharing. I have read other blogs that say if the house icon does not appear then home sharing is not set up correctly. Any suggestions as it seems to be running fine except for letting me move files.

    see if anything in this support article helps.

  • I have an Iad2 and ever since ios6-there are issues.I get occasional lock-ups and have to reboot. The WSJ app freezes when running their videos to the end. The only work-around is to stop the video before it's over. Worse than windows me !!!!!

    My Ipad2 worked perfectly before ios6 upgrade. It now freezes occasionally and I have to reboot to get it to work. Also the WSJ app will now freeze if I try and run one of their videos that is imbedded in the article. My only work-around is to stop (press done) before the end of the video or I have to do a total reboot. The problems remind me of Windows ME . Will Apple resolve these issues or become more like Microsoft. Hopefully there will be a restore button in the future like Microsoft was forced to do because a lot of upgrades are just terrible. Am I crazy or are there other people having the same issues with ios6, or could this just be a coincidence and my ipad2 is starting to fail just when ios6 arrives ?

    I know this will not help but, the bluetooth headset I purchased for my wife works great and it pairs with our car and our sound bar in the livingroom (Motorola Droid Razr) 98.72.16.XT912.Verizon.en.US
    However I did not upgrade over the air but from a android web site and placed it on my external sd card. I believe this made the difference in why we had no issues and upgraded functionality has been great.
    Please note when I mention these bluetooth devices I mean the Razr connects with no problems.
    It also had no internet issues and none of the problems others have complained about in other threads.
    unfortunately when you say thousands have these issues I cannot say that is accurate. The hope is when large numbers of owners have updated to the Jelly Bean and are complaining inmase then Motorola will issue a patch to verizon to get out to the affected users.
    Of course now that Google owns Motorola Mobility and has laid off loads of workers it may never issue an os patch.

  • I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

    i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

    I really appreciate all your help. Today I spent some time on the problem. First I purchased  any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered  them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me  the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

  • Does iMessages only work when writing to people who have i05, or can you write to people using other systems ?

    I have an iPad 2, but have never yet been able to send a iMessage....does this only work when writing to people who also have i05, or can you also write to people who use other systems ?
    iMessages is turned on on my system, but even when writing to people who I know have iPads or iPhones , I just get the red exclamation mark....
    Sending messages on my iPhone seems to work okay when sending to non iPhone users, so I don't understand what's wrong here .

    From http://support.apple.com/kb/HT3529 :
    iMessage allows you to send unlimited text, photos, videos, locations, and contacts using Wi-Fi or 3G* from your iPhone, iPad, or iPod touch to other iOS 5 users.
    Note: On iPhone, if iMessage is unavailable, the message may be sent as SMS or MMS, depending on content. Carrier messaging rates may apply. You can turn this on or off in iPhone at Settings > Messages > Send As SMS. Messages sent using iMessage will appear in a light blue bubble, while messages sent using SMS or MMS will appear in a green bubble.

  • I recently transferred my ipnone service from at&t to another carrier the phone worked fine until i tried to up it with itunes i now have a frozen itunes logo and a plug on the screens my phone is a iphone 3g how can i get my phone to work again?

    my ipone 3g is frozen with aitunes logo and plug after i tried to update it from apple. the phone worked fine even thou i changed carriers from at&t to Simple celleur. How can i get my phone to work?

    As AT&T has not officially unlocked your phone it must have been hacked to use another carrier.  So when you updated it has relocked itself to AT&T. There is no official unlock so this will happen anytime you update.

  • L7780 All in One - Windows 7 Clean Install - Error when printing

    I have a huge problem with a failry new L7780 all in one. I has stopped printing from my laptop. I recently upgraded to Windows 7 with a clean install from Vista....ergo I formated the disk and then reinstalled Windows 7 . And, now every time I print I get the following message "the job has failed due to an error on the printing system"
    The printer is selected as default.
    The printer does connect through wireless onto my network , and does appear on my PC as connected. However, once I press print after a few seconds it seems to disappear.
    I have not altered any network settings and MAC address is off on my router. It was working fine on 2 Home pc's running XP, worked great with Vista. And its only this one Laptop with Windows 7 that can't print to it for some reason.
    However, sometimes when I have shutdown...all of a sudden it prints out what I asked it to 30 minutes ago.
    I have tried installed and re-installing drivers.
    I have tried forced start ups .
    Switching it off at the mains.
    Resetting the network adpater.
    I can only think at this stage there is a compatibility issue with Windows 7.
    Any clues? Any help anyone can offer.
    Cheers,
    Steve
    This question was solved.
    View Solution.

    If this sounds like your issue:
    After installing the product on a network, you turn the computer off, and then on, and the product loses functionality. The product no longer prints and the product icon disappears from the Devices and Printers menu in Windows 7 (64-bit).
    Try this fix:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89191-1&lc=en&dlc=en&cc=us&...=
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

Maybe you are looking for