The Operating System returned Error 27(The drive cannot find the sector requested.)

On a Windows 2008 R2 server running SQL 2008 Standard on a Raid 5, when performing a backup on the databases via copy to another local drive I receive and The operating system returned error 27(The drive cannot find the sector requested.) to SQL Server during
a write at offset 0x0000002fd204000 in the file F:\SQLDATA\Email_Images.mdf. The server is a HP DL380p Gen8. I've contacted HP thinking this was a Hardware issue but HP ensure me its not and to contract Microsoft support.

Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Please offer us what backup method you are using, did you want to backup
the data to the CSV, the origional error you have got.
1. The best method would be to have separate disk drive for each cluster SQL instance and add the disk to the specific SQL group and add it to the dependency of the SQL resource.
There would be less overhead with this process other than having to create two disks, one of each instance
2. You could consider creating a file sharing resource on cluster and add the backup disk to this resource group and use it to back up the databases of both the instances
to single disk. The down side of this method would be, all the databases backups will fail if the fileshare resource goes down. You cannot use GUI to take the backup, need additional setup/maintenance for the fileshare resource group
http://support.microsoft.com/kb/224967
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server.

Hi,
I am facing an issue while loading fresh data into SQL server database.
we are able to load data into staging area, but while processing stored procedures system face bellow error message :
[823] [HY000] [Microsoft][ODBC SQL Server Driver][SQL Server]The operating system returned error 1450(Insufficient system resources exist to complete the requested service.) to SQL Server during a write at offset 0x00000243bd0000 in file 'E:\SQLDB\DBName.mdf'.
Additional messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC
CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
we use windows 2008 R2 with SQL server managment studio 2008.
Appreciate your suggestion.
Thanks in advance.
Best Regards,
Manorath
Manorath

Hi Manorath,
Based on my research, this issue can be occurred in the following scenarios:
You are running a DBCC command on a large database. For example, you are running the DBCC CHECKDB statement on the database. At the same time, you run many DML statements on the database.
You create a database snapshot for a large database. At the same time, you are running many DML statements on the database.
In these scenarios, the SQL Server service stops responding. The DBCC CHECK statement is never completed, and you receive the error message repeatedly.
This issue occurs because the sparse file for a database snapshot file has exceeded the file size limitation in NTFS file system. When the operating system error 1450 occurs, SQL Server enters an infinite retry loop.
To fix this issue, please download and install Cumulative update package 1 for SQL Server 2008 Service Pack 1. Besides, because the fixes are cumulative, each new release contains all the hotfixes and all the security fixes that were included with the previous
SQL Server 2008 fix release. We recommend that you consider applying the most recent fix release that contains this hotfix.
Reference:
http://support.microsoft.com/kb/967164
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

The operating system returned error 23(Data error (cyclic redundancy check).)

My Stored Procedures and Jobs Showing this Error. Even though i can able to access the data throgh SSMS in Database Engine.Please help on this.
Executed as user: RMS\Administrator. The operating system returned error 23(Data error (cyclic redundancy check).) to SQL Server during a read at offset 0x000006684a2000 in file 'F:\RMSLiveData\RMS.mdf'. Additional messages in the SQL Server error log and
system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors;
for more information, see SQL Server Books Online. [SQLSTATE HY000] (Error 823). The step failed.
Thanks
RehaanKhan. M

DBCCCHECKDB('DBNAME',REPAIR_ALLOW_DATA_LOSS)
For crying out loud! Don't you have any shame!
There are situations where you may have to run DBCC CHECKDB with the option REPAIR_ALLOW_DATA_LOSS, but it is not the first thing you shold try if the database seems to be corrupt. Particularly, you should first make sure that you work on a copy of the database
files. REPAIR_ALLOW_DATA_LOSS means that DBCC CHECKDB has carte blanche to throw all pages it can piece together - which could be about all data pages if it is that bad.
Corruption siuations are very difficult to assist with in forums, because there can be a lot of stake. The only advice I can give is to restore the database from a clean backup. If you don't have a clean backup, you have a problem. The database may still
be saved, but you need an expert on site to help you, if you have never worked with this before. Advice given in this forum applied haphazardly can result in more damage that you already have.
But, oh, one thing: this type of corruption are always due to hardware errors like bad disks or bad memory sticks. So just restoring the database is not enough. Finding new hardware is important too.
Erland Sommarskog, SQL Server MVP, [email protected]
Actually on the same disk there are other Databases Stored and they work Properly and Backup also can be taken for that Databases. But, for this particular database only this error is happening when iam trying to take backup. But data retrieval and access to
front end application happening as usual. Please help on this.
RehaanKhan. M

The operating system returned error 170(The requested resource is in use)

Hello Experts,
We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
Write error during log flush.
Error: 9001, Severity: 21, State: 4.
The log for database 'DBNAME' is not available
We have checked the Anti Virus but all data files are excluded. We have also disabled the anti virus for some time but still issue persist.
This is a Virtual Machine and no VM snapshot backup is running during the time window.
Please help!
Thanks in advance.
Regards,
Divesh Mathur

Hello Experts,
We have a Sharepoint farm where we are receiving OS Error 170 for many days. It results in database shutdown/Start because required transaction file is not available.
The operating system returned error 170(The requested resource is in use.) to SQL Server during a write at offset 0x0000029495e000 in file 'F:\MSSQL10_50.INST1\MSSQL\DATA\****.***. Additional messages in the SQL
Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately
Write error during log flush.
Error: 9001, Severity: 21, State: 4.
The log for database 'DBNAME' is not available
Hello,
I sense a disk issue here( I am not sure).Log for database is not available seems when data needs to be written on log file it was not avaialble.Can you check with storage team that disk on which SQL server files reside is OK
Secondly did you run DBCC CHECKDB for your database in picture can you paste result of it.
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

The operating system returned error 21(failed to retrieve text for this error. Reason: 15105

Hello everybody,
I have a huge database over windows 2003 server and sql server 2008 r2, all of them with all update, no firewall, no antivirus, no any server feature/role installed.
Over the last 2 months I suddently start getting the following error:
The operating system returned error 21(failed to retrieve text for this error. Reason: 15105) to SQL Server during a read at offset 0x000000000da000 in file 'S:\TempDB\tempdb.mdf'. Additional
messages in the SQL Server error log and system event log may provide more detail. This is a severe system-level error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB).
This error can be caused by many factors; for more information, see SQL Server Books Online.
I have the TEMP database split over 5 partitions on 5 different SAN disk. beggining size of each partition fix to 20 GB with autogrow 10%. Single Instance, around 15 DB.
The space on each hard disk does not reach 60%.
I got the above error when all temp files reach 27 GB approx.
I already ran a check disk, checkDB and everything says no error found, but I still got same error.
Does anyone know what could cause something like this?
note, when getting the above error, the only way to fix it, because I cannot do any select on any DB is to restart the service, so each temp file start again at 20 GB and everythign seems to be fine until reach the size again.
Gilberto H.

The operating system returned error 21(failed to retrieve text for this error. Reason: 15105
Hello Gilberto,
See System Error Codes (0-499) for error code 21:
ERROR_NOT_READY
21 (0x15)
The device is not ready.
Could be an issue with your storage system
Olaf Helper
[ Blog] [ Xing] [ MVP]

MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

Why Microsoft doesn't have correct fix to run automatically. How many years we need to cry with same error again n again?
Does any one have correct solution which will fix permanently while running more than 4000 systems in our environment
Manual stuff isn't easy. Pls provide permanent fix?
MP has rejected a policy request from GUID:27935EC8-95F1-4104-A613-E72D2A9764E0 because it was not approved. The operating system reported error 2147942405: Access is denied.

This isn't a bug to fix. This is by design. Clients must be approved to be managed. Thus, only your configuration or expectations must be fixed. To correct your configuration, see the link Henrik posted. To correct your expectations, read the content linked
by Henrik.
Jason | http://blog.configmgrftw.com

HT5278 How do I download the operating system ios 5 to my iphone 4s? The ios 6 will not let me use my bluetooth in my car.

How do I download the operating system ios 5 to my iphone 4s. The ios 6 will not let me use my bluetooth in my car.

The only iOS currently available is iOS 6.0.1 (6.0.2 for iPhone 5). Once you upgrade you cannot downgrade. Contact your car maker for help.

Ever since we upgraded the operating system on my iMac to OS X, Ilost the function of exporting photos directly into iPhoto from my email. What should I do?

Ever since we upgraded the operating system on my iMac to OS X, Ilost the function of exporting photos directly into iPhoto from my email. What should I do?

Let Apple know you want this bug fixed:
http://www.apple.com/feedback
Workaround: drag the images from the email to the iPhoto icon on the dock.

Validation error: cvc-elt.1: Cannot find the declaration of element

I use JAXP to do XML Parsing and validation. I use DOM and not SAX.
My code is as follows:
SchemaFactory schemaFactory = SchemaFactory.newInstance("http://www.w3.org/2001/XMLSchema");
File schemaLocation = new File("C:\\config\\JMS_properties.xsd");
Schema schema = schemaFactory.newSchema(schemaLocation);
// Create the validator
Validator validator = schema.newValidator();
// Add an error handler to the validator
JMSErrorHandler errorHandler = new JMSErrorHandler();
validator.setErrorHandler(errorHandler);
// Create the dom factory
DocumentBuilderFactory domFactory = DocumentBuilderFactory.newInstance();
// Set the namespace property
domFactory.setNamespaceAware(true);
// Create the document builder
DocumentBuilder builder = domFactory.newDocumentBuilder();
// Parse the xml file
Document doc = builder.parse(xmlFile);
// Create the dom source and destination
// The destination will contain the doc augmented with the default attribute/element
DOMSource source = new DOMSource(doc);
DOMResult result = new DOMResult();
// Validate and augment the source
validator.validate(source, result);
// Error checking
if ( errorHandler.validationError == true ) {
    // errors occured during the parsing
    System.out.println("XML file is not valid");
    System.exit(1);
// Get the augmented document
this.augmented = (Document) result.getNode();When executing my code, I got:
Validation error: cvc-elt.1: Cannot find the declaration of element 'JMSProperties'
But the xml file has this element in it so I do not understand the meaning of that error.
??????

I fight with the same error, it is curious that the schema from schemaLocation can not be validated. If i set the schema manually through an attribute it works. What i try to do is overwriting the resolveEntity in the handler to get the schema from another location and validate the xml against the schema specified in the attribute schemaLocation rather than setting it manually :-(

Error cvc-elt.1: Cannot find the declaration of element 'wsdl:definitions'

Hi! Ive got an error: cvc-elt.1: Cannot find the declaration of element 'wsdl:definitions'
My WSDL file was generated by PI.
After import this WSDL-file to my Business Process to section Service Interfaces - I've got this error.
But, it seems to be OK when I created the project, create a model by choosing the WSDL-file. All validators do not give me any error.
Whats wrong?!

Though this is not my area, you can have a look at this thread which may help you
[Re: XML inputs in a MII transaction to be used as a Web Service call|XML inputs in a MII transaction to be used as a Web Service call;
thanks
G. Lakshmipathi

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I have purchased a ringtone in the iTunes Store for my iPad, and I cannot find the download together with my music. I have received the invoice but I have no product. I am working with iOS6, if that helps. Can anybody help me?

I am confused. Do you mean you found the music, not the tones, or you can't find either?
If the former, then this is normal. You can't redownload tones from the Cloud.

In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). Can anyone help?

In the latest version of Pages (5.0) I cannot find the refresh button to update a chart copied from Numbers (also latest version 3.0). I saved my Numbers document before copying to Pages. Can anyone help?

I think you identified my mistake. I confused tables-charts-graphs. I was wanting a "table" of cells (numbers) to be added to the Pages document. Is there no way to do that and keep the tables linked between Numbers09 and Pages09?
An example would be a Numbers spreadsheet calculating a number (say, a product price) and that number (data) be linked to a product information text in Pages.
I just recently saw the Merge function in Pages, but have not yet learned how that works. I don't use Pages much at all but it would come in handy for creating to information sheets about products --- with the product pricing being updated from a Numbers spreadsheet.
If you have any hints on how that can be done or where I can find info on that I would appreciate it.
Thanks for catching my misunderstanding.
Bill

Does iCloud backup the operating system? and how do I back up the operating system.

I have heard you can backup the operating system on iCloud. I have not been able to find documentation on how to backup the operating system. thanks mknmemries54
now sure which operating system I have. It's a new one but not retenal display

Welcome to the Apple Community.
You cannot use iCloud to back up your computer.
Can I suggest you get yourself an external hard drive and start using Time Machine or another back up utility. Data loss is often sudden and unexpected and far too late to do anything about in many cases.

I am getting an error message stating it cannot find the apps on my ipad.

I am getting an error message saying "iTunes cannot sync apps to iPad (name) because the apps installed on the iPad cound not be determined."
I have logged out of iTunes on both iPad and in iTunes. Rebooted both iPad and computer then logged back in.
I am using:
os 10.7.5
itunes 10.7
ipad os 6.0

I couldn't open it, so I couldn't check on how it was running. But I actually just tried reinstalling the program and for now it seems to be working.
Thanks for your help!

I am trying to log in to my MSN Hotmail e-mail account, and after entering my login info, I get the error message that Firefox cannot find the server. Why not?

When trying to log into my MSN Hotmail account (@msn.com), after I enter my credentials, Firefox gives me an error message that "Firefox can't find the server at blu152.mail.live.com". I am able to log in easily from the same computer using Internet Explorer. I think this problem just started yesterday. Why is Firefox unable to connect to my e-mail account?

Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

The Operating System returned Error 27(The drive cannot find the sector requested.)

Similar Messages

Maybe you are looking for