"The operation could not be completed" Error
Every time i try to open the pixel bender filter I get an error that says "The operation could not be completed" Any Ideas? Windows 7 i5 processor and 8 gb of ram. I tried re installing, and several images from small to max size.
Thanks
Perhaps your issue has been resolved by now. I read all the responses as I was also having the Error:
The operation could not be completed." message and this is how I resolved it. I have Win XP with
3Gb Ram,and the same graphics card you referenced, by Nvidia. I looked as the document size and it was at 370 dpi so I dropped it down to 72 and saved it. Then I had no problem opening Pixel Bender and using the various filters in it.
Similar Messages
-
The operation could not be completed (Error code -43)
Trying to run Time Machine for first time. Get "The operation could not be completed. An unexpected error occurred (error code -43)." Have rebooted etc... suggestions?
What is the partition map scheme (Apple partition map, or GUID?) and what is the format (HFS+/Mac OS Extended or other?) of the drive? For PowerPC Macs the Time Machine drive requires "Apple Partition Map", and for intel-based macs it requires "GUID". Both architectures require "HFS+" (otherwise known as "Mac OS Extended") for the format of the drives.
-
"The operation could not be completed" error when starting VS 2013 (premium)
It was running fine and then msbuild wouldn't stop so I had to kill VS. After that I get the above error every time I try to start VS.
Same result with the various console invocation devenv options (/safemode, /resetuser, ...)
My path is < 2048 chars. I've also re-registered actxprxy.dll and oleaut32.dll to no avail.
I've run the VS2013 repair a couple times, no errors reported but I still get the error.
Errors in the activity.xml log file are:
<entry>
<record>28</record>
<time>2015/02/13 18:54:31.800</time>
<type>Error</type>
<source>VisualStudio</source>
<description>SetSite failed for package [Task Scheduler Package]</description>
<guid>{00CD9DDA-7350-457C-A240-71BD667FC4DE}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>
<entry>
<record>29</record>
<time>2015/02/13 18:54:31.800</time>
<type>Error</type>
<source>VisualStudio</source>
<description>End package load [Task Scheduler Package]</description>
<guid>{00CD9DDA-7350-457C-A240-71BD667FC4DE}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>
and
<entry>
<record>32</record>
<time>2015/02/13 18:54:31.810</time>
<type>Error</type>
<source>VisualStudio</source>
<description>SetSite failed for package [Environment Package Window Management]</description>
<guid>{5E56B3DB-7964-4588-8D49-D3523AB7BDB9}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>
<entry>
<record>33</record>
<time>2015/02/13 18:54:31.810</time>
<type>Error</type>
<source>VisualStudio</source>
<description>End package load [Environment Package Window Management]</description>
<guid>{5E56B3DB-7964-4588-8D49-D3523AB7BDB9}</guid>
<hr>80131534</hr>
<errorinfo>The type initializer for 'Microsoft.VisualStudio.ErrorHandler' threw an exception.</errorinfo>
</entry>Hello Charlie,
Based on the error info, 'Microsoft.VisualStudio.ErrorHandler' is used as "Provides methods for dealing with common COM error codes". Some components send this error out but I seems cannot find the info about the specific component. Do you have
any more error info in your ActivityLog.xml log?
If you do not have any info, we may need to use process monitor tool:
https://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Please open this tool and then open Visual Studio to reproduce the error.
After that, please filter the Visual Studio related process and upload the log to OneDrive and share the file to here.
I think it will contains some info about the specific corrupt dll or any com components. Then we can try register it again.
By the way, may I ask why you register actxprxy.dll and oleaut32.dll here? Do you have any error info about them?
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while consolidating. The operation could not be completed.
Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-) -
IMovie error message "The operation could not be completed"
I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
ThanksMy problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with. -
The share operation "master file" has failed. the operation could not be completed because an error occurred creating Frame 93164 (error-1). how can i find the frame?
https://discussions.apple.com/thread/6219522
-
I am trying to share a project and after the 3% of sharing the project it appears this message.
The operation could not be completed because an error occurred when creating frame 6105 (error -1).
What can I do?? I need some help please!!You need to set the FCP X Preferences to count in frames, locate that frame, delete the clip around it and replace with a fresh one.
-
When attempting to build a quicktime movie from my video project on final cut pro I got this message "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".
Kathy ...
Better to post your topic in the Final Cut Pro community here. -
Hi everybody,just started with FCPX and the following occured:
The operation could not be completed because an error occurred when creating frame 570 (error -1)
Result is that i can not share to my hard disk.
If anybody could help me out here....?CHange General preferences to show frames. Check what's happenING at the frame number. Maybe replace the shot.
-
I'm getting this error code in Final Cut Pro. The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it? This code comes up when exporting.
Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.
-
When trying to export a project from FCPX, I get this error
The operation could not be completed because an error occurred when creating frame 30256 (error -1).
Has anyone any ideas?
Many ThanksSwitch your FCP preferences to show frames and see what's happen at that frame number. Try trash any render files. Switch off background rendering. Don't render. Try replacing the clip at the problem area.
-
One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation. -
every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."
Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?
-
I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?
Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue.... -
Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
Select "Use Custom Rules",
Browse to a custom dump file folder,
Check "All Exceptions",
Check "Ignore Exceptions that occur inside Kernel32.dll",
Select "Mini Dump Type" to "Small"
Select "Save Mode" to "Cyclic Saving 5 times"
Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li
Maybe you are looking for
-
Now i have a bit more space, i can explain what is really properly wrong. The other day i updated my itunes to the 10.4.1 version and now can no longer access the Itunes store - whenever i try to do so i get the bar at the top gets to about half way
-
Goods Receipt for Purchas Order - WBGMCR02 IDoc
Hello all! I am attempting to create material documents for good receipts of a finished goods purchase order using IDoc WBGMCR02 and message type MBGMCR configured by vendor in WE20 (partner profiles). I am creating test data via WE19 and I'm fairly
-
Get Message ID and namespace from ABAP Mapping
Hi XI Expert, Please advise how to get the message ID and namespace from ABAP Mapping. Thank You and best Regards Fernand
-
Can we add new field in standard idoc segment ?
HI all, My requirement is to add new field in segment named E1EDL44 (Idoc named - DELVRY03). Please guide me how to proceed. thanks manish
-
Will upgrading iPhoto delete all my pictures?
Hello, I just upgraded my computer to Maverick and now iPhoto isnt working and says I need to upload. I have the upload however I was wondering if it would delete all my pictures in the process?