The operation couldn't be completed Input/Output Error in FCPX

So i updated my FCPX to 10.0.4 from 10.0 and all of my media/projects are on a external usb hard drive and now after updating I'm receiving an error when I launch FCPX and the error states "The operation couldn't be completed Input/Output error" and the option i have is click ok and then it opens up FCPX.
If i don't have the external USB hard drive plugin i don't receive the error and FCPX open up with no issues and much fast because I assume it doesn't have to read the media and the projects.
Thanks for you help

I have no idea what the specific error code means but input/output errors can sometimes mean a disk is failing. Make a couple of backups of all important data before doing anything else.
Verify your startup disk using the First Aid tab in Disk Utility. If the disk needs repair boot from your Leopard DVD and repair your disk from Disk Utility under Utilities on the screen after you choose your language. Repeat the repair process until Disk Utility reports all is well.
If Disk Utility doesn't find any errors you might want to try a new download of the update and keep a sharp eye on your HD for anything else that might indicate all is not well. Take special care to back up important data.
If Disk Utility finds errors it would probably be a good idea to pay a visit to the Apple Store to have them check out your hard drive even if Disk Utility is able to repair the errors.

Similar Messages

What does this error message when I try to do updates mean? And how can I fix it? Thanks. The operation couldn't be completed. (NSURLErrorDomain error -1012.)

What does this error message when I try to do updates mean? And how can I fix it? Thanks. (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
James
maverick 10.9.1

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message: The operation couldn't be completed. (NSURLErrorDomain error -1012.)

I receive an alert from ITunes that there is an update available. When I go to the updates in ITunes I receive the following error message:
The operation couldn’t be completed. (NSURLErrorDomain error -1012.).

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message: The operation couldn't be completed. (OSStatus error -43.)

I've been using TeleChart 2000 for a couple of weeks with no problem. Then over the weekend it disappeared from my dock and wouldn't stay in the dock even though I selected "keep in dock." At least I could still open it by going to the "downloads" folder. Now today, when I tried to open it after using it earlier in the day, I got this message: The operation couldn’t be completed. (OSStatus error -43.)
Anyone know how to fix this?
MJ

I took a quick look at http://www.welovemacs.com/whdoalltherc.html which list many error codes, Error 43 appears to be a file not found error.

Contacts won't sync with my new MacBook (The operation couldn't be completed. (CoreDAVErrorDomain error 1.))

Hello everyone.
I recently bought a used MacBook Pro (Mid 2012, running OS X Mavericks) as my first Mac, so maybe it is really easy but I cannot figure it out myself.
I am really satisfied with the product, the only thing that is bugging me is that the built-in Contacts App won't sync my existing iCloud contacts.
It's working fine on my iPhone and iPad but it does not seem to be working with the MacBook. At first I thought maybe it could use a reboot. That didn't work. Next I deleted the iCloud account from the Mac, rebooted again, entered my account data and opened contacts again. Still nothing even after waiting 10 minutes.
Then I found this nice option "Show Last Import". And behind the "iCloud" group I noticed a little exclamation mark. After I clicked on it I was presented the following error: "The operation couldn’t be completed. (CoreDAVErrorDomain error 1.)"
I don't really know what to do with this error since google and other search engines did not deliver a resolution to this problem which worked...
Is my iCloud broken or something? Everything is working fine so far with my other devices (iPad, iphone, icloud-website, even my Windows PC at work can sync the contacts :-/)
I hope you can provide me a solution because I am out of ideas myself

So for me I found a solution after hours of searching. Surprisingly it is in another thread here:
https://discussions.apple.com/message/19223886#19223886
Problem solved with a lot of help from Apple Support. After upgrading to ML, I still had all my contacts in iCloud and on the iPhone, but not on the iMac and the MacBook.
1) We have set up a temporary second iCloud account for me.
2) On my iPhone, I signed out of iCloud and did NOT delete the contacts.
3) On the two Macs I signed out of iCloud and had everything deleted.
4) I signed the iPhone up with the new iCloud account and synced all contacts into that one.
5) With Safari I opened the online interface of my original iCloud account and manually deleted all contacts.
6) On my iPhone, I signed out of the temporary iCloud and did NOT delete the contacts.
7) On my iPhone, I signed into my original iCloud account and waited for the contacts to sync.
8) On the two Macs I signed into my original iCloud account and everything was okay again.
So have my contacts back, but we do not really know what was wrong.
As the original author said, I had no idea what exaclty was wrong but somehow it's working.
I'm not using any Google contacts so unfortunately I can't help you with that.

Notes will not open: The operation couldn't be completed. (NSSQLiteErrorDomain error 8.)

Notes will not open.
The operation couldn't be completed.
(NSSQLiteErrorDomain error 8.)
System Preferences closes when select Mail, Contacts & Calendar
I found a Discussion regarding and replied. Copied:
Re: notes has error NSSQLiteErrorDomain error 8.
Apr 1, 2013 11:11 AM (in response to Linc Davis)
I am replying to Posts RE: Notes: error 8 - and following Posts regarding.
Re: notes has error NSSQLiteErrorDomain error 8.Feb 11, 2013 8:10 PM (in response to fuceye)
Same issue as of today, 4.1.13, Notes will not open.
The operation couldn't be completed.
(NSSQLiteErrorDomain error 8.)
I use Notes daily on my iMac. I have notes open next to my browser at all times for (Big Surprise) Note taking. I rarely use / open Notes on any of my other devices; iPad, iPhone, etc.
iMac Mid 2007 / Processor 2.8 GHz Intel Core 2 Duo / Software OS X 10.8.2 (12C60)
For the past couple days it has been unexpectedly and repetedly quitting. I have had to close all applications and restart my computer to open it back up. Most often, only other Application running is Safari. Occasionally I have had Pages, Calculator, Real Time Player, PDF Viewer, Preview open besides Safari and Notes.
I found this post and attempted to follow:
"Check the Mail, Contacts & Calendar preference ..."
System Preference window Quits, no error message, closes, as soon "Mail, Contacts & Calendar" is selected.
I found this too was an issue that followed in a reply to original post. I follwed through to next Post:
Re: notes has error NSSQLiteErrorDomain error 8.Feb 12, 2013 6:14 PM (in response to fuceye)
Spotlight Search: Console
"Enter the name of the crashed application or process"
Not sure if I enter "Notes" or "System Preferences" - I have done both see below.
NOTE: Step 2 RE: User Diagnostic Reports: BLANK - no information or data shows.
In reference to your Post Step 1:
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Select the messagesfrom the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
System Preferences
"Enter the name of the crashed application or process"
String matching: Filter: Enter: "System Preferences"
"Important: Some private information, such as your name, may appear in the log. Anonymize before posting."
Anonymize: XXXXX
4/1/13 12:57:09.677 PM System Preferences[377]: CoreData: error: (266) I/O error for database at /Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1.storedata. SQLite error code:266, 'disk I/O error' errno:34
4/1/13 12:57:09.681 PM System Preferences[377]: Notes framework failed to load Notes persistent store: Error Domain=NSCocoaErrorDomain Code=256 "The file couldn’t be opened." UserInfo=0x7ff362bd2470 {NSSQLiteErrorDomain=266, NSUnderlyingException=I/O error for database at /Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1.storedata. SQLite error code:266, 'disk I/O error' errno:34}
4/1/13 12:57:09.682 PM System Preferences[377]: Attempting to move old store file to /Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/Backups/2013-04-01--12:57 :09--V1.storedata and create a new empty store file
4/1/13 12:57:09.726 PM System Preferences[377]: Notes framework failed to set up the persistent store: Error Domain=NSSQLiteErrorDomain Code=8 "The operation couldn’t be completed. (NSSQLiteErrorDomain error 8.)" UserInfo=0x7ff362c82c70 {NSFilePath=/Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/Backups/2013-04-01--12:57 :09--V1.storedata, reason=Failed to replace destination database}
Notes
"Enter the name of the crashed application or process"
String Matching: Filter: Enter: "Notes"
4/1/13 1:12:03.491 PM Notes[451]: CoreData: error: (266) I/O error for database at /Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1.storedata. SQLite error code:266, 'disk I/O error' errno:34
4/1/13 1:12:03.495 PM Notes[451]: Notes framework failed to load Notes persistent store: Error Domain=NSCocoaErrorDomain Code=256 "The file couldn’t be opened." UserInfo=0x7f9bb3c2c7c0 {NSSQLiteErrorDomain=266, NSUnderlyingException=I/O error for database at /Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1.storedata. SQLite error code:266, 'disk I/O error' errno:34}
4/1/13 1:12:03.497 PM Notes[451]: Attempting to move old store file to /Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/Backups/2013-04-01--13:12 :03--V1.storedata and create a new empty store file
4/1/13 1:12:03.511 PM Notes[451]: Notes framework failed to set up the persistent store: Error Domain=NSSQLiteErrorDomain Code=8 "The operation couldn’t be completed. (NSSQLiteErrorDomain error 8.)" UserInfo=0x7f9bb3c2e690 {NSFilePath=/Users/XXXXX/Library/Containers/com.apple.Notes/Data/Library/Notes/Backups/2013-04-01--13:12 :03--V1.storedata, reason=Failed to replace destination database}
Console: select: User Diagnostic Reports
Nothing shows. Blank page.
this is to left of Console window / panel.
DIAGNOSTIC AND USAGE INFORMATION
> User Diagnostic Reports
BLANK
In reference to your post Step 2:
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Hi Terence,
Thank you for your help.
My saved iphoto library is in iphoto 09 and I have now iphoto 11 in my iMac as I upgraded from OS X Lion Mountain to OS X Mavericks.
Thanks
Charles

In iphoto i get this error for a video that I wanted to play - The operation couldn't be completed. (OSStatus error -54.) what is that error and how to fix it?

The operation couldn’t be completed. (OSStatus error -54.)
My Apple course instructor felt it would be smart to create all in iphoto dragging in all videos and photos to one spot.
I now get these errors and they wont play.
What is the error telling me and how do I fix it and get the video to play please??
Is it true iphoto will be replaced in this New Year and if so does anyo

No it didn't at all.
I went to the finder and saw several of the same .
When I called Apple they told me not to delete anything using the Finder… odd I thought, as that was the only way I could see the multiple videos and photos.
Do you think there is any harm in deleting from there directly if I have a good playable copy?
Thank you both for responses.
The clips/videos some are from iPhone 4.
I opened it manually and found 4 copies of most of the same videos, same names, some with slight variations. Don't know why.
Some are titled from iphoto /Masters don't know why that happened
Now I also have some clips with white dotted line on grey where the clip used to be? why would that occur??
In my finder there are now 97000 images. Yet I only have 22,000 in iphoto. Where are the rest located and why so many duplicates?
Have I checked a box somewhere and need to address that?
Thank you for any insight and guidance.

I purchased flip player to convert wma files i have from a previous laptop and it played some of my music but not some of the others this error msg came up, i payed 30.00 so it could convert? The operation couldn't be completed. (OSStatus error -19000.)

I purchased flip player to convert wma files i have from a previous laptop and it played some of my music but not some of the others this error msg came up, i payed 30.00 so it could convert? The operation couldn’t be completed. (OSStatus error -19000.)

Dear Nay2000,
I have the same problem, my girl-friend saved a bigger Gigabyte library from her old laptop before she sold it, then at some point she realized that she couldn't play many songs that she had transfered. Now, I paid those 30 quid as well, and it doesn't play 99% of the files, that is very frustrating, is there any way you got it revived?
Regards.

HT1338 Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Update bundle just released for Aperture 3.4.2, Safari 6.0.2, and iPhoto 9.4.2 will not install. Keep getting error "The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)" Any one else having this issue? Please help.

Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us; working on it!"
Message was edited by: MacLuc

Iphoto will not play H.264 video: error message "The operation couldn't be completed. (OSStatus error -101.)" Any suggestions to fix?

Hi, I am on iphoto 11 version 9.2, Mac OS 10.7.5 using a macbook Pro 2.8Ghz Intel. All of a sudden I cannot play video (H.264) on iphoto. I get the message "The operation couldn’t be completed. (OSStatus error -101.)". I rebuilt the iphoto database and videos played once, since then, they will not play and I continue to get the error message, even if I rebuild the database.
Any thoughts or helpful suggestions from anyone gratefully received.

Hi Terence,
Thank you for your help.
My saved iphoto library is in iphoto 09 and I have now iphoto 11 in my iMac as I upgraded from OS X Lion Mountain to OS X Mavericks.
Thanks
Charles

HT5675 This update will not install on my MAC. GIve this error The operation couldn't be completed. (NSURLErrorDomain error -1012.)(-1012)

I get this error when installing the latest JAVA update:The operation couldn’t be completed. (NSURLErrorDomain error -1012.)(-1012)

Found it! Turning of Kaspersky antivirus fixed it. Seems to be a port issue.

Getting "The operation couldn't be completed. (NSURLErrorDomain error -1100.)" when trying to check for software updates

Does anyone know how to resolve this problem? I get "The operation couldn’t be completed. (NSURLErrorDomain error -1100.)" when trying to check for softward updates on my iMac. I have the latest version of Mountain Lion installed.

Apparently a server overload > NSURLErrorDomain error -1100
Try again later.

HT1338 get this response when trying to check for updates The operation couldn't be completed. (NSURLErrorDomain error -1100.)

The operation couldn’t be completed. (NSURLErrorDomain error -1100.)

There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist
Note that if you are trying to download iTunes 10.7, that can be found here:
http://support.apple.com/kb/DL1576
Also, note that there is no reason to be anxious to get it, as the only thing added in iTunes 10.7 is compatibility with iOS 6, which will not be available until the 19th, and the new iPhone, which will not be available until later as well. The new iTunes that was announced is iTunes 11, which is also not yet available.

HT5568 What's up with this: The operation couldn't be completed. (NSURLErrorDomain error -3001.)(102)

Have not been able to update to Safari 6.0.2 and iPhoto 9.4.2. Keep getting this message.
"The operation couldn’t be completed. (NSURLErrorDomain error -3001.)(102)"
Have checked it out online but responses are way to techy to understand. Using 27 inch iMac 3.1 Intel Core i5, 32GB memory

you can find Safari here:
http://download.cnet.com/mac/3151-20_4-0.html?tag=main;new
the rest in Apple downloads, but the Apple servers are a bit overloaded.

Can anyone help with this error message (The operation couldn't be completed. (NSURLErrorDomain error -(1012.) (-1012)

The most recent update I have in the App Store is an OSX update but I receive this error message when I select the update button. (The operation couldn’t be completed. NSURLErrorDomain error -1012. -1012. Can anyone tell me why or how to delete this update in the que from the app center and try again? Any help would be greatly appreciated. Thanks.

http://www.apple.com/support/mac/app-store/contact.html?form=account

The operation couldn't be completed Input/Output Error in FCPX

Similar Messages

Maybe you are looking for