The Opteron 144 experiment.
Neo4 SLI Plat with the new 939 Opteron 144(1.8Ghz, 1MB L2), coming soon for $150 to a store near you!
Initial results of a 1Ghz overclock, basically on air.
http://home.comcast.net/~aicjofs/144.jpg
Quote from: aicjofs on 05-October-05, 04:35:55
@azzkickr
Nice which one did you ge?. Where did you get it from? I had to go to the underground in the US to get it. Only problem is the high HTT required and the limited CPU multi selection. Makes it hard to get your memory in it's sweet spot because you have fewer options. That's one of the reasons I modded the 3.7BIOS to put back in the 150Mhz and 183Mhz dividers. Although those dividers arern't specifically supported I am prime stable with them. Also I have only seen mine and one other MSI Neo4 result, the MSI doesn't seem to be doing quite as good as the DFI.
http://www.ocforums.com/showthread.php?t=414786
It's freely available over here in Belgium-Europe No need to go undergorund
Cost me about 140$ !
I'll post details soon, when it arrives. Can you send me a copy of your modified BIOS for me ?
Similar Messages
-
RX480M2 - does it support Opteron 144...??
Maybe looking to build a new MCE box and was hoping that the RX480M2 supports the Opteron 144. The MSI site doesn't say.
If not I'll use a RS482M4-ILD.
thanks
D.Number of CPUs 1
Code Name SledgeHammer
Specification AMD Athlon(tm) 64 FX Processor 27
Family / Model / Stepping F 5 8
Extended Family / Model F 5
Brand ID 9
Technology 0.13 µ
Supported Instructions Sets MMX, Extended MMX, 3DNow!, Extended 3DNow!, SSE, SSE2, X86-64
CPU Clock Speed 1804.1 MHz
Clock multiplier x 9.0
HTT Bus Frequency 200.5 MHz
L1 Data Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L1 Instruction Cache 64 KBytes, 2-way set associative, 64 Bytes line size
L2 Cache 1024 KBytes, 16-way set associative, 64 Bytes line size
L2 Speed 1804.1 MHz (Full)
L2 Location On Chip
L2 Data Prefetch Logic yes
L2 Bus Width 128 bits
Mainboard and chipset
Motherboard manufacturer MICRO-STAR INTERNATIONAL CO., LTD
Motherboard model K8T Master2-FAR, 100
BIOS vendor Phoenix Technologies, LTD
BIOS revision 6.00 PG
BIOS release date 08/15/2003
Chipset VIA K8T800 (VT8383) rev. 1
Southbridge VIA VT8237 rev. 0
Sensor chip Winbond W83627THF
AGP Status enabled, rev. 3.0
AGP Data Transfert Rate 8x
AGP Side Band Addressing supported, not enabled
AGP Aperture Size 256 MBytes
Memory
DRAM Type DDR-SDRAM
DRAM Size 1024 MBytes
DRAM Frequency 200.5 MHz
FSB:DRAM 1:1
CAS# Latency 2.0 clocks
RAS# to CAS# 3 clocks
RAS# Precharge 2 clocks
Cycle Time (TRAS) 6 clocks
Bank Cycle Time (TRC) 11 clocks
DRAM Idle Timer 16 clocks
# of memory modules 2
Module 0 Corsair DDR-SDRAM PC3200 - 512 MBytes
Module 1 Corsair DDR-SDRAM PC3200 - 512 MBytes
Software
Windows version Microsoft Windows XP Workstation Service Pack 1 (Build 2600) -
I was trying to add and app to my iphone and was not able to do so. It wanted updated credit information. So, I entered it and it will not accept the month of experation. I have shut the phone down, sync it to the computer to update. Will not work. What can I do to continue?
Off the top I dont thing its good practice to post an email address here
I dont see how a google password change would impact on ur Apple ID/iTunes account
Have u access to the old email address? If not and you fail the apple security process then you need to call them
Have u tried to manage ur apple id from : appleid.apple.com -
Help please? Programming the Phillps 144 Remote's Colored Buttons ABCD[Yellow,Blue,Red,Green]
I have the Phillips 144 Remote. I wish to program one of the Colored bottons at the bottom of the remote by learning from the output of an other remote.
I have a Panasonic TC_P50UT50TV.
Today I successfully programed my Phillips 144 remote for this TV.
There is one TV function that I need. It isn't obvious if it is available already on the Remote. Tried most of the buttons-none seemed to act upon the INPUT control of the TV.
The single function I wish to have on the REMOTE;
To be able to vary the TV's INPUT [such as HDMI 1,HDMI 2,AV1,AV2]
Can I use the colored buttons,? If so, how can I program those buttons by LEARNING from my TV's remote?
If I can't program the colored buttons, is there any other button that I can program for changing the TV's INPUT?
Solved!
Go to Solution.Thanks for the suggestion.
It works!
Exactly as you told me.
Justin wrote:
Assuming you have programmed the remote correctly to turn on and off your TV, have you tried hitting the TV button at the top of the remote and then the A/V button (also labeled Input) at the bottom? Works for me on all of my TVs.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 -
I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8) -
Can anyone tell me if they're compatible? How well would it overclock? Any links to Opteron overclocking would be appreciated. Thanks.
OSA144BNBOXIf I'm not mistaken, the 144 is a single core CPU & it should "drop right in" with no changes.
The OC'ing potential is great for that CPU, I've heard of close to 2.7-8. But it all depends on your parts.
Might want to head over to the Overclockers section & see if anyone else has that setup. -
Opteron 144 with an RD480 NEO2-FI
I am thinking of upgrading my kid's computer from an xp2500 , Abit NF7-S ver2 using his mem etc. Will the Operon wor with the MSi RD 480 ? I'll need a new PCI-E graphics card to replace the 6200 agp
tomhi there, welcome to forum.
144 model status is "under testing".
perhaps will work, but its not 100% tested.
all other opterons MSI guarantee will work.
look here: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=697&kind=1 -
Anyone have any luck with the tascam 144?
i am buying a tascam 144 usb interface in about a week cus someone told me it worked well with garage band but now i am having second thoughts cus i have read that a lot of people have trouble getting garage band to recognize it. anyone got any advice?
also how do you turn the volume of a track up during the mastering process, without clipping, so that your song is as loud as a commercial cd?
thanksdon1212 wrote:
i am still a bit confused though
can someone explain how compression or limiting raises the volume cus a i am stil new : )
Compression is confusing, and people are often confused by what it does and how it works, so you’re not alone! It’s also used in a number of ways for different purposes, many of them “so that’s how they do that!” familiar, and others not so obvious. It’s been an essential part of the recording process throughout the history of recording, and great compressors, like great guitar amps, are sought-after pieces of gear.
To understand conceptually how compressors work to make things louder (which isn’t their only use, but is the topic of the thread), you need to understand the difference between peak and average levels. Average volume levels are what give you a sense of how loud the music is, peak levels are the occasional spike. A peak level may be so short, you barely perceive it.
When you raise the volume level on the whole track to the point just underneath clipping, it’s going to look to the peaks, and bring them up to the top of the volume scale. Everything else (and average levels) are going to be below that. If you tried to raise the volume any higher to get average levels higher – so it sounds louder – you would be lifting your peak levels into the clipping range. And clipping is bad.
So, the trick is to lower the volume on just the peaks so you can raise the volume on the entire track and make the average levels louder. Compression does that by kicking in above a threshold that you set (or is set in the preset), and lowering levels above that threshold by a certain ratio. If the settings are gentle, you may not notice it. If the settings are aggressive, you may not only notice it, but it can create ugly artifacts. In any case, above a certain threshold, it restrains the volume, taming the peaks.
After it tames the peaks (which may incidentally, be only a few imperceptible spikes) the audio flows into a “makeup gain” stage that’s essentially a volume knob. When first compressed, with reduced peaks, the track is no louder than it was before – and with lower peaks may even be softer. However, with the lowered peaks, the makeup gain stage is able to raise the overall volume higher than before, since (if you can picture it) there’s less distance between the new shorter peaks, and where most of the song volume lives below them. So first the compressor squashes the peaks, then the makeup gain can bring everything up... even higher.
Turning off normalize is kind of a “cheat” because it works by allowing you to bring the peaks into clipping (and therefore raise the overall level). In other words, rather than tame the peaks, you let them clip. Because some songs (and people) will tolerate some clipping, it’s a fast and easy way to raise the volume. Artful use of compression and limiting (which is extreme compression above a certain threshold) can get you to the same place without clipping.
Compressors are also often used on voice and instruments to “fatten them up” where the goal isn’t necessarily to make things louder, but to make things sound fuller by lifting up the low-level stuff that might be otherwise inaudible.
Compressors are not without their price. If you overuse a compressor, the dynamic range can be squashed into lifelessness. Also (and particularly with bad compressors), you can sometimes hear the action of the compressor when it kicks in above a certain threshold, and when it releases below it, what's called "pumping."
You might want to check out some other sites on the net to really understand the concept because once you understand it, you can use it to shape the sound of your tracks in powerful ways, and avoid pitfalls.
But I wouldn’t worry about it too much! Understand it as much as you can, but if you just dive in and do it, and use your ears to determine what sounds good or bad to you, you can learn by doing pretty quick. -
Wondering if anyone knows if this board supports Opteron CPU's. Was looking at getting it and using an Opteron 146 or 148. Read on MSI's support site at this link where it lists Opteron under the Cool & Quiet driver. I downloaded the newest BIOS listed there and unzipped it hoping to find some release notes but no luck. Any info would be appreciated.
Quote
Anyone have any experiance with tis particular board and an Opteron?
Lol!
Try
The Opteron 144 experiment.
or
The "Unofficial" MSI 939 Opteron Thread -
Is the K8NGM2-FID compatible with Opterons ?
Hello,
I intend to buy the MSI K8NGM2-FID motherboard and I would like to know if it is compatible with Opteron 144 ? And what bios version is necessary ?
Thanks.After the day I had yesterday I have to say it is not compatible with any 939 pin Opterons.
I spent all day yesterday trying to install Windows 2003 SBS on a MSI K8NGM2-FID with an Opteron 148. It almost appears to work until you go to set up Exchange and the Fax services, but looking at the event log it is obvious Windows wasn't installed properly.
I reloaded the system 4 times before I swapped the Opteron for an Athlon64. Installlation completed without a issue using the A64.
I noticed on MSI website that they haven't tested any 939 pin Opterons yet. When will this happen?
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=702&kind=1 -
CPU Upgrade For W1100Z (Opteron 250) Possible?
Hey,
I was wondering if anyone could tell me what the maximum CPU for the W1100Z is. I have an older W1100Z with the original Opteron 144 installed and was looking to boost the performance a bit.
Since dual-core processors are probably out - what is the maximum supported by the workstation.
Thanks for any info.
IainThe W1100Z and the W2100Z systems use the same systemboard architecture.
So ... whatever processor that works in the W2100Z should be usable in the W1100Z.
Keep in mind that they are Socket 940 processors, not Socket 939.
Sun Whitepaper, June 2005, about the system architecture:
http://www.cobaltnet.com/desktop/workstation/w1100z/arch-wp.pdf
SunWIN Token #415542
I found it with a Google search.
The Sun System Handbook (SSH) shows the systemboard in both workstations
to have a model designation of "K85AE", so I used that as the Google keyword.
The Google search gave a number of interesting results.
In particular, AnandTech's web site has a review of the systems that is a good read. -
New Project - New Problems or The day the Reaper died
Ok, this is more like telling a story than a cry for help.
The story is about a new project, new (great) results and the disaster that followed.
Well story starts October 21st with me upgrading rig 1 with new parts. They came for my Opteron165 setup which oc'ed nicely but didn't make it far enough. So board, cpu and ram of rig 1 (sig) got replaced by the following parts:
The new cpu is an Athlon X2 5200+ EE (TDP 65W), 2.6ghz, 2x 1024kb L2 cache, 90nm, F3 stepping.
The board is from MSI (of course), a K9N SLi Platinum. Very nice board and luckily it is PCB version 1.2 which features a heatpipe while the older version just had a very bad cooling, passive aluminium heat sink. The older version is the one still to be seen on MSI product site.
The new one looks therefor way better and stays cooler:
In addition I threw a pair of the finest ddr2 ram in it. A 2gb dual channel kit of OCZs new DDR2 PC2-6400 Reaper CL3 Edition. DDR2-800 with 3-4-4-15 (stock), guranteed to work with 2.3volts.
So suppositions for oc were great and I started:
First of all upgraded the bios from 1.8 to the latest 1.10. Then I thought why go step by step, why not starting big. So I set HT clock to 250mhz, resulting in a cpu clock of 3250mhz (multi 13), Hyper transport link set to 800mhz (x4), ram very relaxed (divider 667, 5-5-5-15 2T). It didn't post but I thought solution is easy, forgot to set extra voltage for cpu. Next try at 3250 mhz with 1.25v and set 0.1v extra in bios. It didn't post. I set voltage to maximum but no luck. Tried again but this time I lowered the HT link to 600mhz (x3). Now it posted even with 1v extra and it also booted XP but seemed to be not very stable. So set extra voltage to 0.15v which enhanced stability greatly.
After minor driver problems my old XP installation worked pretty perfectly with the new setup. Time had come to see if it was stable and I started Orthos. It seemed to be ok, 1hour no problems, 2hours, 3hours and bam... 3hours 40 minutes and that's it. I thought "Damn, but it will make it with more voltage". I added more voltage (0.2v extra) and started Orthos again but no way, at 4hours 32 minutes it stopped again.
I'm not easy to discourage and so I added 0.25v to the 1.25v vcore and tried another time. Still 250x13 = 3250mhz.
And it worked!
Orthos now easiely worked six hours when I stopped it myself to see if it would also be stable with more intensed ram settings. I set ram divider to 800mhz (1:1) resulting in DDR2-929 and timings to 4-4-4-15 2T.
I started Orthos and left the machine alone... Outstanding 16 hours later it was still working!
After 17hours 5 minutes and 50 seconds of running Orthos I knew I had a stable beast!
It also worked with ram set to divider 667 (resulting in 406mhz or ddr2-812) and 3-4-4-15 2T. However 1T was a real killer, thats why I left command rate at 2T and were happy so far.
Performance was really good and I wanted to know if this would increase my 3dmark06 results which were already great with old setup because of nicely oc'ed 8800GTS 320. The opteron could do 9572 3dmarks with it.
The new setup easiely broke the 10.000 points by reaching 10306 points with cpu at 3250mhz, ram at ddr2-929 (4-4-4-15 2T), vga as seen in sig.
It really seemed to be finished. The rest would be just playing around and going for suicide clocks. At least that was what I thought at that time.
Before maxing it out I wanted to have the Vista 64 Ultimate installation also running with the new setup. I hadn't booted vista since upgrading to the am2 system, so I tried for the first time....
AND NOW EVERYTHING GOT F***** UP
Vista welcomed me with a blue screen instead of a logon screen. I was pi**** but aware it might not like changing from NForce4 SLi to NForce 570 SLI. Next step was trying safe mode but vista thought of blue mode and showed a screen of that colour. I thought "ok, maybe you dislike setup change" and so I went for a clean install. I even formated the partition and gave it a go. Installation was fine 'til first start. Well, it wasn't a start to be honest as vista told me it was not able to do this. Repair wasn't successful either.
Assumption was now system is not making the oc clocks although proved to be stable under XP. So I removed any oc and loaded fail-safe mode in bios. Relaxed ram timings to 5-5-5-18. I started installing vista again, thought I could oc again when it is installed.
Oh boy, how wrong I were... The 2nd installation turned out to be as faulty as the first and I tried again and again... After installation failed nine times I were finally discouraged.
I just wanted to boot XP for now, forget about installing vista and maybe ask here if it this was a known issue.
Well, I didn't get to see XP. I was just informed about a missing file that also prevented to boot safe mode. I took my XP cd and started automatic repair. After this was nearly finished the first errors and notifications about unknown, missing or corrupted files appeared. Although XP made it to finish install and booted successfully. But this XP wasn't a real XP as many things didn't work. I couldn't install drivers because loads of errors and crc crap made working with it impossible. Clear install time! But no way, same issues like seen in vista.
Now I were pretty desperate and I urgently needed an idea. I came to the solution maybe I could try with single channel, using just one mem stick. I removed one and tried installing XP again. It worked without any issue. Even driver installation and other software worked without a problem. Now I were even able to install Vista.
But still I didn't know what caused all the trouble. I had three suspects: Mobo, ram, cpu. I doubted in faulty board but cpu (failing to control dual channel) or the ram stick I removed were my favorites. As it was the easiest to try I put the other stick back in but used a slot combination that would cause single channel. Booting Vista now turned out to be a disaster. Errors, corrupt files and so on. Same with XP.
Conclusion: Dual channel is not the problem. Added mem stick was now suspect no.1. I took the first one out and started memtest. Memtest didn't show errors after 8hours. I wondered and started Vista. Result was the same as seen before with two sticks. Errors and access violations. Replaced this stick with the other one and everything was fine again.
Next day I tried with a borrowed MDT 2gb dual channel kit which also worked without a problem.
Sad but true one of the Reapers is K.I.A. . Damn....
Now I'm sitting here with a borrowed kit of value ram which luckily allows me to let the cpu run at 3250mhz with mem divider at 667mhz (result: 406mhz) and which I can luckily keep 'til I get another kit of Reapers. I have to send my current Reapers back to vendor these days and wait for the rma process and wait and wait....
So what started greatly ended not so great. For now I'm sick and tired of seeing bios screens or installing windows and I'm also pretty pi**** because of all the data I lost. Some crucial ones among them.
Main problem remains: I have no idea WHY the Reaper died. I never set any higher vdimm than 2.3v what should be ok for it. It never felt hot and was directly in the main airflow. Also I have no clue why memtest didn't find any error with the faulty stick.Quote from: flobelix on 30-October-07, 06:12:31
Be aware that you have to keep an eye on shader clocks when oc'ing the gpu. With common tools you're oc'ing gpu and shaders at the same time. Since I'm suspecting a misproportion of gpu/shader clocks to be one of the reasons for problems with factory oc'ed Geforce 8 you should try with different combinations. With the latest Riva Tuner you can change 'em seperately without having to mod the bios.
Memory is at it's end I suppose, that's the problem with most high end cards, no potential. Seems as you have to live with that.
That's true for HD2900 series I think but as far as I know 8800GTX needs it even for stable working.
Could be your psu is too weak, maybe really time for the new Corsair. On the other hand should be strong enough I guess.
You're ungrateful! That good old 3500+ oc'ed so well and was once a real performer and you call him crap.... bad boy.
"You're ungrateful! That good old 3500+ oc'ed so well and was once a real performer and you call him crap.... bad boy. "
yes you are right the CPU perform great, but its just old..(is not CPU fault in direct sense )
"Be aware that you have to keep an eye on shader clocks when oc'ing the gpu. With common tools you're oc'ing gpu and shaders at the same time. Since I'm suspecting a misproportion of gpu/shader clocks to be one of the reasons for problems with factory oc'ed Geforce 8 you should try with different combinations. With the latest Riva Tuner you can change 'em seperately without having to mod the bios."
Yes im aware about it, but not this is the case.. i got instability even with 2Mhz on the GD more...SD remain @ stock 1350 and memory stock as well.. and go instability...
Reversed story if i put everythink is stock, but +2Mhz more on the memory i got the same instability....
"With the latest Riva Tuner you can change 'em separately without having to mod the bios."
hmm nope here, its locked increasing GD clock inscrease SD clock as well. they are locked and increased in parallel.(etc, both in same time)
"Memory is at it's end I suppose, that's the problem with most high end cards, no potential. Seems as you have to live with that."
mem. chips used are for 1000Mhz the VGA stock, MSI is not OCed them.. so they must have potencial.. also VGA is adverted with DOT... at least its designed to handle till 5-6% OC, i have done few review(don't trust much here,but anyway its an info) and user opinion no problem to OC till 2100Mhz(1050). So i doubt that is memory problem.
"Could be your psu is too weak, maybe really time for the new Corsair. On the other hand should be strong enough I guess."
Yes that is the only conclusion which i can stuck at the moment... Good news is that i have talked with distributor today and they ensured me that will delivered tomorow for me. So tomorow i will know more about that mistery when i install the more powerful(and hope so great) PSU. -
/*! flamingo 6.4.0 2013-06-18 */
function AppListView(){this.allBooks=[],this.recentBooks=[],this.$dom=$("<div>",{"class" :"app-list"}),this._loadBooks(),this._createView(),setTimeout($.proxy(this._prel oadIcons,this),1e3)}function Beacon(e,a){location.protocol.match(/^http/)&&e.enable_tracking&&e.product&&e.p latform&&e.version&&(this.title=e.title.toLowerCase(),this.product=e.product.toL owerCase(),this.platform=e.platform.toLowerCase(),this.version=e.version.toLower Case(),this.locale=a.isoCodes[0],this.loaded=$.getScript(App.resourcePath+"sc.js ",$.proxy(this.init,this)),$(e).on("navigate",$.proxy(this.navigate,this)),$(e). on("search",$.proxy(this.search,this)),$(e).on("searchresults",$.proxy(this.sear chResultSelected,this)),$(e).on("feedback",$.proxy(this.feedback,this)),$(e).on( "mediastart",$.proxy(this.mediaStart,this)))}function Book(e){if($.extend(this,e),this.name=this.title,$.each(this.topics,$.proxy(fun ction(e,a){this.topics[e]=new Topic(e,a,this)},this)),$.each(this.sections,$.proxy(function(e,a){this.section s[e]=new Section(e,a,this)},this)),$.each(this.toc,$.proxy(function(e,a){this.toc[e]=thi s.topics[a]||this.sections[a]||a},this)),$.each(this.sections,$.proxy(function(e ,a){var t=a.children;$.each(t,$.proxy(function(e,i){t[e]=this.topics[i]||this.sections[ i]||i,t[e].parent=a},this))},this)),this.landing=this.topics[this.landing]||"",t his.copyright=this.topics[this.copyright]||"",!this.landing){for(var a=this.toc[0];a instanceof Section;)a=a.children[0];this.landing=a}this.unknown_topic=new Topic("unknown",{name:"TOPIC_UNAVAILABLE".loc(),href:""},this)}function ContentView(e,a){this.name=e,this.$dom=$("<div>",{id:e,"class":"contentView"}). addClass(e),this.topic=null,a&&this.showTopic(a)}function DebugPanel(e){this.$dom=$("<dl>",{"class":"debug-info"}),$("<dt>",{text:"flamin go"}).appendTo(this.$dom),$("<dd>",{text:e.version}).appendTo(this.$dom),$.each( ["build_id","title","design","enable_tracking","product","platform","version","l ocale","collect_feedback","framework","source_schema"],$.proxy(function(a,t){$(" <dt>",{text:t}).appendTo(this.$dom),$("<dd>",{text:e.book[t]||"[ undefined ]"}).toggleClass("undefined",!e.book[t]).appendTo(this.$dom)},this))}function Design(e){this.name=e||"default";var a=Design.namedSkins[this.name];this.cssClass="",this.isLayeredStyle=!1,this.hel pviewerWindowSize={height:520,width:815},this.dismissSearchLabel="Cancel",this.p reloadList=["lightbox-close.png","[email protected]","lightbox-close-hover.p ng","[email protected]","disclosure-open.png","[email protected]" ],a&&(a.preloadList&&(this.preloadList.concat(a.preloadList),delete a.preloadList),$.extend(this,a))}function HelpViewerBook(e){this.id=e.bookID(),this.title=e.title(),this.link="help:openb ook='"+this.id+"'",this.iconHref=("x-help-icon://"+encodeURIComponent(this.id)). replace(/\.help$/,""),this.apple=this.id.match(/^com\.apple\./)?!0:!1}function LandingView(e,a){this.book=e,this.bundle=a,this.contentView=new ContentView("landing",e.landing),this.$dom=this.contentView.$dom,this.isHelpCen ter="HelpViewer"in window&&!HelpViewer.currentScope(),this.isHelpCenter?this._addMarquee():this._l ayoutLanding()}function LightboxView(e){this._$previous_focus=$(),this.visible=!1,this.$dom=$("<div>",{ id:e,"class":e,"aria-hidden":"true",role:"alertdialog",tabindex:"-1"}).hide(),$( "<div>",{"class":"background"}).appendTo(this.$dom);var a=$("<div>",{id:"lightboxOuterWrapper"}).appendTo(this.$dom),t=$("<div>",{id:"l ightboxInnerWrapper"}).appendTo(a),i=$("<div>",{id:"lightboxContentWrapper"}).ap pendTo(t);this.contentView=new ContentView("lightbox-content"),i.append(this.contentView.$dom);var n=$("<img>",{src:App.resourcePath+"images/[email protected]",alt:"Close".lo c(),role:"button"});$("<a>",{"class":"closeButton"}).append(n).appendTo(a).click ($.proxy(function(){App.navigation.popPrevious(),this.hide()},this)).hover(funct ion(){n.attr("src",App.resourcePath+"images/[email protected]")},funct ion(){n.attr("src",App.resourcePath+"images/[email protected]")})}function NavController(e){this._book=e,this._linearTOC=[],this._currentItem=null,this._p ushedItem=null,this._addItems(e.toc),App.design.isLayeredStyle||this._linearTOC. unshift(e.landing),this._checkHash();var a=$.proxy(this._checkHash,this);"onhashchange"in window?$(window).bind("hashchange",a):setTimeout(function(){setInterval(a,100)} ,500)}function Section(e,a,t){this.id=e,this.book=t,$.extend(this,a)}function TOC(e,a,t){this.book=e,this._contentPath=t,this._$liByID={},this.$dom=this._$ul ForNavList(this.book.toc,0).addClass("toc");var i=$("<li>",{role:"treeitem","class":"home"}).prependTo(this.$dom),n=$("<a>",{hr ef:"#"+this.book.landing.id}).appendTo(i);$("<img>",{src:a+"images/tangerine/hom [email protected]"}).appendTo(n),$("<span>",{"class":"name",text:"Home".loc()}).appendTo( n),this._$liByID[e.landing.id]=i,this.$dom.on("click","a",$.proxy(this._toggleSe ctions,this))}function Topic(e,a,t){this.id=e,this.book=t,this.categories=[],$.extend(this,a),this.ful l_name=this.name,this._content_loaded=!1,this.$content=$("<div>",{id:e}),this.is _landing=$.inArray("landing",this.categories)>-1,this.is_glossary=$.inArray("glo ssary",this.categories)>-1,this.is_external=!!this.href.match(/^\w+:/),this.is_h ash=!!this.href.match(/^#/)}function TermMatch(e,a,t){this.term=e,this.topic=App.book.topicForID(a),this.weight=t}fu nction WeightedTopic(e){this.topic=e.topic,this.weight=e.weight}function SearchResult(e,a,t){this.query=e,this.matchingTerms=a,this.topics=[];var i={};$.each(t,function(e,a){var t=a.topic.id,n=i[t];n?n.addMatch(a):i[t]=new WeightedTopic(a)});var n=$.map(i,function(e){return e}),o=n.sort(function(e,a){return a.weight-e.weight});this.topics=$.map(o,function(e){return e.topic})}function SearchIndex(e){this._keywordStemRegex="",this._matchesByTerm={};var a,t,i,n,o=[];i=function(e,t){return new TermMatch(a,t,e)},n=function(e,a,t){return"\\b"+a+(t?t.replace(/(.)/g,"$1?"):"" )+"\\b"};for(var s in e)a=s,t=e[a],this._matchesByTerm[a]=$.map(t,i),a=a.replace(/(\.|\*|\+|\?|\{|\}| \||\[|\]|\(|\)|\-|\^|\$)/g,"\\$1"),a=a.replace(/^(..)(.+)$/,n),o.push(a);o.sort( function(e,a){return a.length-e.length}),this._keywordStemRegex=RegExp(o.join("|"),"gi")}window.App= {version:"6.4.0",env:"production"},location.search.match(/%23/)&&location.replac e(location.href.replace("%23","#")),$.ajaxSetup({crossDomain:!1}),window.APD={}, $.extend(window.App,{book:null,bundle:null,design:null,navigation:null,searchInd ex:null,resourcePath:"",queryParams:{},views:{}}),String.prototype.loc=function( ){return App.bundle?App.bundle.translate(this):this},function(){if("console"in window||(window.console={},$.each(["assert","count","debug","dir","dirxml","err or","group","groupCollapsed","groupEnd","info","log","markTimeline","profile","p rofileEnd","time","timeEnd","trace","warn"],function(){window.console[this]=$.no op})),location.search&&$.each(location.search.substring(1).split("&"),function() {var e=this.split("=");App.queryParams[decodeURIComponent(e[0])]=decodeURIComponent( e[1])}),App.queryParams.topic){var e=App.queryParams.topic,a=location.pathname;return delete App.queryParams.topic,a+=$.param(App.queryParams)?"?"+$.param(App.queryParams): "",a+="#"+e,location.replace(a),void 0}App.queryParams.localePath&&App.queryParams.localePath.match(/^http/)&&delete App.queryParams.localePath,navigator.userAgent.match(/Help Viewer/)&&($.browser.helpviewer=!0),$(document).ready(function(){function e(){clearTimeout(i),t.hide().remove()}function a(){e(),console.error("Could not load navigation.json file."),$("html").addClass("nocontent")}$("#javascriptDisabled").remove(),App.r esourcePath=$("script[src$='flamingo.js']").attr("src").replace(/flamingo\.js$/, ""),(new Image).src=App.resourcePath+"images/[email protected]";var t=$("<div>",{id:"updating"}).hide().appendTo("body").append($("<img>",{src:App. resourcePath+"images/[email protected]"})),i=setTimeout(function(){t.show()},500);A pp._loadBundle().pipe(function(){return $.getJSON(App.bundle.URL()+"navigation.json",function(e,a,t){App._addServerType (t),App.book=new Book(e),App.beacon=new Beacon(App.book,App.bundle.current)})}).fail(a).then(e).then(App.init).then(App .showInterface).then(function(){return $.getJSON(App.bundle.URL()+"search.json",function(e){App.searchIndex=new SearchIndex(e)})}).fail(function(){console.error("Could not load search.json file.")})}),App._loadBundle=function(){var e=$.Deferred(),a=App.queryParams.localePath||App.queryParams.lang||window.local ePath;return App.bundle=new APD.Bundle("",a,function(){$("body").attr("dir",this.current["text-direction"]) ,$("<div>",{"class":"localizedUpdateText",text:"Loading latest help...".loc()}).appendTo("#updating"),$("html").attr("lang",this.current.isoCo des[0]),e.resolve()}),e},App._addServerType=function(e){var a=e.getResponseHeader("x-server-type");"development"!==this.env&&a&&a.match(/re view|staging/)&&(this.env=a),$("html").addClass(this.env)},App.setTitle=function (e){var a=App.book.title,t=e&&(e.full_name||e.name);t!==a&&(a+=": "+$("<textarea>",{html:t}).text()),document.title=a},App.init=function(){var e=$("html");if($.each($.browser,function(a){"version"!==a&&e.addClass(a)}),e.ha sClass("nocontent")||$("#contentUnavailable").remove(),window.devicePixelRatio>1 &&void 0!==document.body.style.backgroundSize&&e.addClass("bgsize"),App.design=new Design(App.book.design),$.browser.helpviewer&&Design.helpviewerWindowSize){var a=Design.helpviewerWindowSize,t=Math.max(a.width,top.outerWidth),i=Math.max(a.h eight,top.outerHeight);top.resizeTo(t,i)}if(navigator.userAgent.match(/(iphone|i pad)/i)){"-webkit-overflow-scrolling"in document.body.style||e.addClass("nooverflow");var n=720;App.design.helpviewerWindowSize&&(n=App.design.helpviewerWindowSize.width ),$("<meta>",{name:"viewport",content:"maximum-scale=3.0,width="+n}).prependTo(" head")}},App.showInterface=function(){App.createViews(),App.design.preloadImages (),App.navigation=new NavController(App.book)},App.createViews=function(){var e=$("body"),a=$("<div>",{id:"container","class":"container"}),t=$("<div>",{id:" menu","class":"menu"}).appendTo(a),i=$("<div>",{id:"front-matter","class":"front -matter"}).appendTo(a),n=$("<div>",{id:"navigation","class":"navigation",role:"n avigation"}).appendTo(i);App.views.landing=new LandingView(App.book,App.bundle),App.views.toc=new TOC(App.book,App.resourcePath,App.bundle.URL()),App.views.topic=new ContentView("topic"),App.views.debug=new DebugPanel(App),App.views.lightbox=new LightboxView("lightbox"),$.browser.helpviewer&&!HelpViewer.currentScope()&&(App .views.appList=new AppListView),a.add(App.views.lightbox.$dom).addClass(App.design.name).addClass( App.design.cssClass),e.prepend(a),e.append(App.views.debug.$dom),i.prepend(App.v iews.landing.$dom),a.append(App.views.topic.$dom.hide()),searchController.addInt erfaceElements(n),n.append(App.views.toc.$dom),e.append(App.views.lightbox.$dom) ,App.views.appList&&e.append(App.views.appList.$dom),$("<h1>",{"class":"book-tit le"}).append($("<a>",{href:"#",text:App.book.title})).appendTo(t),$(App.book).on ("navigate",$.proxy(App.views.toc.updateSelection,App.views.toc)),$(App.book).on ("navigate",$.proxy(App.toggleViews,App)),$("body").on("orientationchange",App.r esetOverflow)},App.resetOverflow=function(){var e,a=App.views,t=$(".toc").add(a.landing.$dom).add(a.topic.$dom);t.css("overflow ","visible"),e=t.css("overflow"),t.css("overflow","")},App.toggleViews=function( e,a,t){var i=$(".front-matter"),n=i.find("#landing");App.setTitle(a),t===App.views.appList ?(App.views.topic.hide(),i.hide(),App.views.appList.show()):(App.views.appList&& App.views.appList.hide(),i.show()),t===App.views.landing&&App.views.topic.hide() ,App.design.isLayeredStyle?t===App.views.landing||t===App.views.toc?(i.attr({"ar ia-hidden":!1,tabindex:-1}).show().focus(),App.views.topic.hide()):t===App.views .topic&&i.attr({"aria-hidden":!0,tabindex:-1}).hide():t===App.views.landing||t== =App.views.toc?n.show():t===App.views.topic&&n.hide(),$("#container").attr("aria -hidden",t===App.views.lightbox),t!==App.views.lightbox&&App.views.lightbox.hide ();var o="HelpViewer"in window&&"currentScope"in HelpViewer,s="HelpViewer"in window&&"setBreadcrumbBookTitleWithAnchor"in HelpViewer;o&&s&&"com.apple.machelp"===HelpViewer.currentScope()&&HelpViewer.se tBreadcrumbBookTitleWithAnchor("",null),$("body").prop("scrollTop",0),$("html"). is(".nooverflow")&&window.scrollTo(0,1)},$(document).on("keydown",function(e){!( e.ctrlKey||e.metaKey||e.shiftKey||App.views.lightbox.visible)&&"querySelectorAll "in document&&(37===e.which?App.navigation.previous():39===e.which&&App.navigation. next())}),$(document).on("keypress",function(e){e.ctrlKey&&e.metaKey&&2===e.keyC ode&&App.views.debug.$dom.toggle()}),$("#localizations select").live("change",function(){delete App.queryParams.localePath,App.queryParams.lang=$(this).val(),location.href="?" +$.param(App.queryParams)})}(),AppListView.prototype.show=function(){this.$dom.s how()},AppListView.prototype.hide=function(){this.$dom.hide()},AppListView.proto type._loadBooks=function(){var e=this;"HelpViewer"in window&&HelpViewer.availableBooks&&HelpViewer.recentApplicationList&&($.each(He lpViewer.availableBooks(),function(a,t){e.allBooks.push(new HelpViewerBook(t))}),$.each(HelpViewer.recentApplicationList(),function(a,t){va r i=RegExp(t,"i");$.each(e.allBooks,function(a,t){t.id.match(i)&&e.recentBooks.pu sh(t)})}))},AppListView.prototype._createView=function(){var e=5,a="Show all".loc(),t="Show less".loc(),i=function(){var e=$(this).parents(".app-group"),i=e.hasClass("closed")?t:a;e.toggleClass("close d").find(".showHide").text(i)};if(this.allBooks.length){var n,o,s;n=$("<div>",{"class":"app-group closed"}).appendTo(this.$dom),$("<div>",{"class":"title"}).appendTo(n),$("<a>", {"class":"showHide",text:a,click:i}).appendTo(n),$("<div>",{"class":"clear"}).ap pendTo(n),$("<div>",{"class":"initial-set"}).appendTo(n),$("<div>",{"class":"add itional-set"}).appendTo(n),o=n.clone(!0,!0).appendTo(this.$dom),s=n.clone(!0,!0) .appendTo(this.$dom),$(".title",n).text("Recent applications".loc()),$(".title",o).text("Apple applications".loc()),$(".title",s).text("Other applications".loc()),$.each(this.recentBooks,function(a,t){e>a&&t.$iconLink().a ppendTo(n)}),$.each(this.allBooks,function(a,t){if("com.apple.HelpCenter.help"!= =t.id&&"com.apple.machelp"!==t.id){var i=t.apple?o:s,n=2*e>i.children(".initial-set").children().length?i.children(".i nitial-set"):i.children(".additional-set");t.$iconLink().appendTo(n)}}),$([n,o,s ]).each(function(){if(0===$(".additional-set",this).children().length&&$(".showH ide",this).remove(),0===$(".book",this).length)return $(this).remove(),void 0;for(var a=$(".book:last",this),t=a.parent();0!==t.find(".book").length%e;)$("<a>",{"cla ss":"book"}).appendTo(t)})}},AppListView.prototype._preloadIcons=function(){var e=this;setTimeout(function(){$.each(e.allBooks,function(e,a){setTimeout(functio n(){a.preloadIcon()},20*e)})},1e3)},function(e){var a={events:"",channel:"",pageName:"",eVar1:null,eVar16:null,eVar17:null,eVar18:n ull,eVar20:null,eVar21:null,eVar28:null};e.init=function(){this.setAccount(),thi s.setConstants()},e.setAccount=function(){var e="aaplpdglobaldev";"production"===App.env&&(e="aaplpdglobal"),this.sc=s_gi(e), this.sc.server=this.title,this.sc.trackDownloadLinks=!1,this.sc.trackExternalLin ks=!1,this.sc.trackInlineStats=!1,this.sc.useForcedLinkTracking=!1,this.sc.linkD ownloadFileTypes="exe,zip,wav,mp3,mov,mpg,avi,wmv,pdf,doc,docx,xls,xlsx,ppt,pptx ",this.sc.linkInternalFilters="help.apple.com",this.sc.linkLeaveQueryString=!1,t his.sc.linkTrackVars="eVar1,prop1,eVar2,prop2,eVar3,prop3,eVar4,prop4,eVar5,prop 5,eVar6,prop6,eVar7,prop7,eVar8,prop8,eVar9,prop9,eVar10,prop10,eVar11,prop11,eV ar12,prop12,eVar13,prop13,eVar14,prop14,eVar16,prop16,eVar17,prop17,eVar28,prop2 8,events",this.sc.linkTrackEvents="event1,event2,event3,event4",this.sc.usePlugi ns=!1,this.sc.doPlugins=$.noop,this.sc.visitorNamespace="appleproductdocumentati on",this.sc.trackingServer="metrics.apple.com",this.sc.trackingServerSecure="sec uremetrics.apple.com"},e.setConstants=function(){var e="unknown",a="unknown",t="unknown",i="help:"+this.product,n=i+":"+this.platfor m,o=n+":"+this.version;$.each(["helpviewer","safari","webkit","opera","mozilla", "msie"],function(){return this in $.browser?(e=this,!1):void 0}),$.each([/Mac OS X ([_\.\d]+)/,/iPhone OS ([_\.\d]+)/,/CPU OS ([_\.\d]+)/,/Windows NT ([_\.\d]+)/],function(){var e=navigator.userAgent.match(this);return e?(a=e[0].replace(this,"$1").replace(/_/g,"."),!1):void 0}),$.each([/Version\/([_\.\d]+)/,/Chrome\/([_\.\d]+)/,/MSIE ([_\.\d]+)/,/Firefox\/([_\.\d]+)/],function(){var e=navigator.userAgent.match(this);return e?(t=e[0].replace(this,"$1").replace(/_/g,"."),!1):void 0}),$.extend(this.sc,{eVar2:navigator.userAgent,eVar3:e+":"+t,eVar4:a,eVar5:e+" :"+a,eVar6:App.version,eVar7:i,eVar8:n,eVar9:o,eVar10:this.product,eVar11:this.p latform,eVar12:this.version,eVar13:(navigator.browserLanguage||navigator.systemL anguage||navigator.userLanguage||navigator.language).substr(0,2),eVar14:this.loc ale,eVar15:navigator.language})},e._track=function(e,t){this.loaded.then($.proxy (function(){$.extend(this.sc,a,t),this._resetProps(),this.sc.t(!0,"o",e)},this)) },e._resetProps=function(){var e,a,t={};for(e in this.sc)e.match(/prop\d+/)&&(this.sc[e]=null),e.match(/eVar\d+/)&&this.sc[e]&&( a=e.replace(/eVar(\d+)/,"$1"),t["prop"+a]="D=v"+a);$.extend(this.sc,t)},e.naviga te=function(e,a){var t=this.title+":"+a.name.toLowerCase();this._track("view",{events:"event1",chann el:t,pageName:t,eVar1:(a.is_glossary?"glossary:":"")+a.name,eVar28:a.id})},e.sea rch=function(e,a,t){if(a){var i=this.title+":search",n=t.length?"search":"search: no results";this._track(n,{events:t.length?"event2":"event3",channel:i,pageName:i, eVar1:n,eVar16:a})}},e.searchResultSelected=function(e,a,t){var i=this.title+":search",n="search: result click-through";this._track("name",{events:"event4",channel:i,pageName:i,eVar1:n ,eVar16:a,eVar17:t.name,eVar18:t.id})},e.feedback=function(e,a){var t=this.title+":"+a.name.toLowerCase();this._track("feedback",{events:"event5",c hannel:t,pageName:t,eVar1:a.name,eVar21:"false",eVar28:a.id})},e.mediaStart=func tion(e,a){var t=this.title+":media",i=App.navigation._currentItem;this._track("media: start",{events:"event7",channel:t,pageName:t,eVar1:i.name,eVar18:a,eVar20:"vide o",eVar28:i.id})}}(Beacon.prototype),Book.prototype.topicForID=function(e){retur n e?this.topics[e]:this.landing},Book.prototype.topicForURL=function(e){var a;return $.each(this.topics,function(){return this.href===e?(a=this,!1):void 0}),a},Book.prototype.sectionForID=function(e){return this.sections[e]},Book.prototype.itemForID=function(e){var a=this.topicForID(e)||this.sectionForID(e);return(!a||a instanceof String)&&(a=this.unknown_topic),a},function(){function e(e){return e?e.match(/[^\/]$/)?e+="/":e:""}function a(){var e=[navigator.browserLanguage||navigator.systemLanguage||navigator.userLanguage| |navigator.language];if("HelpViewer"in window&&"preferredLanguages"in HelpViewer)try{e=HelpViewer.preferredLanguages().concat(e)}catch(a){}if("iTunes "in window)try{e=$.map(iTunes.acceptedLanguages.split(","),function(e){return e.replace(/\+?([^;]+);.*/,"$1")}).concat(e)}catch(a){}return e=$.map(e,function(e){return e?(e=e.toLowerCase(),2>=e.length?e:[e,e.substr(0,2)]):null})}function t(e){return i||(i={},$.each(APD.translations,function(e,a){$.each(a.meta.isoCodes,function( e,t){i[t]=a})})),i[e]}var i,n={name:"English",isoName:"English",isoCodes:["en"],folder:"en.lproj","text-d irection":"ltr"};APD.Bundle=function(a,t,i){this.path=e(a),this.current=$.extend ({},n),t&&t.match(/^.*\.lproj$/)&&(this.current.folder=t),this.locales=[],this._ uiStrings={};var o=this;this._loadList().done(function(){var e=o._lookupLocale(t)||o._browserLocale();e&&(o.current=e)}).always(function(){o ._loadStrings()}).always(function(){i&&i.call&&i.call(o,o)})};var o=APD.Bundle.prototype;o._loadList=function(){var e=this,a=$.Deferred();return $.getJSON(this.path+"locale-list.json").done(function(t){e.locales=t,a.resolve( )}).fail(function(){return console.warn("Unable to load language list, loading content from "+e.current.folder),$.getJSON(e.URL()+"locale-info.json").done(function(t){t.me ta.folder=e.current.folder,e.locales.push(t.meta),a.resolve()}).fail(function(){ a.reject()})}),a},o._loadStrings=function(){var e=this,a=e.current.isoCodes;a.push("en"),$.each(a,function(a,i){var n=t(i);return n?(e._uiStrings=n.ui||{},e.cssClass=n.meta.cssClass||"",!1):void 0})},o._lookupLocale=function(e){if(!e)return null;var a=null;return $.each(this.locales,function(t,i){var n=i.isoCodes.concat([i.folder,i.name,i.isoName]);return $.inArray(e,n)>-1?(a=i,!1):void 0}),a},o._browserLocale=function(){var e=null,t=this.locales;return $.each(a(),function(a,i){return $.each(t,function(a,t){return $.inArray(i,t.isoCodes)>-1?(e=t,!1):void 0}),e?!1:void 0}),e},o.list=function(){if(2>this.locales.length)return[];if("iTunes"in window)return[];if("HelpViewer"in window)return[];var e=$.map(this.locales,function(e){return{name:e.name,isoCode:e.isoCodes[0]}});re turn e.sort(function(e,a){return e.name.localeCompare(a.name)}),e},o.translate=function(e){return this._uiStrings[e]||e},o.URL=function(){return this.path+e(this.current.folder)}}(),ContentView.prototype.showTopic=function(e ){e!==this.topic&&(this.topic=e,this.$dom.empty().prop("scrollTop",0).append(e.l oadContent()),"HelpViewer"in window&&"mtContentAccessed"in HelpViewer&&HelpViewer.mtContentAccessed(e.id+" "+e.name,e.book.title)),this.$dom.attr("aria-hidden",!1).show().trigger("conten tLoaded")},ContentView.prototype.hide=function(){this.$dom.attr("aria-hidden",!0 ).hide()},function(){$(".contentView a[href*='.html']").live("click",function(e){var a=$(this).attr("href"),t=a.match(/#/)?a.replace(/^.*\.html(#?.*)/,"$1"):"",i=a. replace(/^(.*\.html)#?.*/,"$1"),n=App.book.topicForURL(i)||App.book.topicForID(t );a.match(/^http/)||a.match(/\//)||(e.preventDefault(),n&&n.navigateTo())}),$(". contentView .Task h2, .contentView .task h2, .showTaskBody, .hideTaskBody").live("click",function(){var e=$(this).parent(".Task, .task").filter(":first"),a=e.toggleClass("closed").hasClass("closed");e.find("[ aria-expanded]").attr("aria-expanded",!a),e.find("[aria-hidden]").attr("aria-hid den",a)}),$(".contentView .LinkAppleWebMovie a, .contentView .movie a").live("click",function(e){if(!("HelpViewer"in window&&HelpViewer.availableBooks)){e.preventDefault();var a=$(this).attr("href");movieLightboxController.showLightboxWithURL(a)}})}(),Des ign.prototype.preloadImages=function(){$.each(this.preloadList,function(e,a){(ne w Image).src=App.resourcePath+"images/"+a})},Design.namedSkins={magenta:{helpview erWindowSize:null,cssClass:"layered",isLayeredStyle:!0},red:{helpviewerWindowSiz e:null,cssClass:"layered",isLayeredStyle:!0},tangerine:{dismissSearchLabel:"Clos e",preloadList:["tangerine/[email protected]","tangerine/disclosure-open.pn g","tangerine/[email protected]","tangerine/home.png","tangerine/[email protected] g","tangerine/menu-background.png"]}},HelpViewerBook.prototype.preloadIcon=funct ion(){(new Image).src=this.iconHref},HelpViewerBook.prototype.$iconLink=function(){return $("<a>",{href:this.link,"class":"book"}).append($("<img>",{src:this.iconHref})) .append($("<div>",{text:this.title}))},function(){var e=LandingView.prototype;e.showTopic=function(e){this.contentView.showTopic(e)}, e._layoutLanding=function(){if(!App.design.isLayeredStyle){var e=this.$dom.wrapInner("<div class='row' />").wrapInner("<div class='center' />").find(".center"),a=$("<div class='row' />").appendTo(e);$.browser.helpviewer||a.append(this._$languageMenu()),$("<div> ",{"class":"copyrightTagline",text:this.book.copyright_text}).appendTo(a)}},e._a ddMarquee=function(e){var a=$(".marquee",e),t=$("img",a).remove().attr("src"),i=$(".title",a).remove().te xt(),n="url("+t+") 0 0 no-repeat, -webkit-gradient(linear, 0 0, 0 100%, from(#ebebeb), to(#fff))";a.length&&e.addClass("hasMarquee"),$("<p>",{text:i}).appendTo(a),$(" <p>",{"class":"spacer"}).prependTo(a).clone().appendTo(a),a.css("background",n)} ,e._$languageMenu=function(){var e=this.bundle.list();if(0!==e.length){var a=$("<div>",{id:"localizations"}),t=$("<select>").appendTo(a);return $("<option>",{text:"Change Language".loc()}).appendTo(t),$.each(e,function(e,a){$("<option>",{val:a.isoCod e,text:a.name}).appendTo(t)}),a}}}(),LightboxView.prototype.showTopic=function(e ){this._$previous_focus=$(":focus"),this.visible=!0,this.contentView.showTopic(e ),this.$dom.show().attr("aria-hidden","false").attr("tabindex","0"),(!$.browser. msie||$.browser.version>=8)&&this.$dom.focus()},LightboxView.prototype.hide=func tion(){(!$.browser.msie||$.browser.version>=8)&&(this.$dom.blur(),this._$previou s_focus.focus()),this.$dom.hide().attr("aria-hidden","true").attr("tabindex","-1 "),this._$previous_focus$previous_focus=$(),this.visible=!1},function(){var e=NavController.prototype,a="showHelpViewerApplicationList";e._addItems=functio n(e){var a=this;$.each(e,function(e,t){t instanceof Section&&(App.design.isLayeredStyle&&!t.parent&&a._linearTOC.push(t),a._addItem s(t.children)),t instanceof Topic&&a._linearTOC.push(t)})},e.hash=function(){return location.hash.replace(/[^\-_a-z0-9]/gi,"")},e._checkHash=function(){this._goToI D(this.hash())},e._goToID=function(e){if(!this._currentItem||this._currentItem.i d!==e){searchController.navigateToItemWithID(e);var t,i=App.book.itemForID(e);i||(i=this._book.landing),e===a?t=App.views.appList:i instanceof Section?t=App.views.toc:i instanceof Topic&&(1>=App.book.toc.length&&App.book.toc[0]instanceof Topic&&i.is_landing?t=App.views.topic:i.is_landing?t=App.views.landing:i.is_glo ssary?(this._pushedItem=this._currentItem,t=App.views.lightbox):t=App.views.topi c,t.showTopic(i)),this._currentItem=i,$(this._book).trigger("navigate",[i,t])}}, e._goToItem=function(e){location.hash=e.id},e._goToPageOffset=function(e){for(va r a=0,t=0;this._linearTOC.length>t;t++)if(this._currentItem===this._linearTOC[t]) {a=t;break}a+=e,0>a?a=this._linearTOC.length+a:a>=this._linearTOC.length&&(a-=th is._linearTOC.length),this._goToItem(this._linearTOC[a])},e.previous=function(){ this._goToPageOffset(-1)},e.next=function(){this._goToPageOffset(1)},e.popPrevio us=function(){this._pushedItem?(this._goToItem(this._pushedItem),this._pushedIte m=null):this._goToItem(this._book.landing)}}(),Section.prototype.navPath=functio n(){return(this.parent?this.parent.navPath():[]).concat(this)},Section.prototype .linkHref=function(){return"#"+this.id},function(){var e=TOC.prototype;e._$ulForNavList=function(e,a){var t=$("<ul>",{role:a?"group":"tree"}).append($.map(e,$.proxy(function(e){return this._$liForNavItem(e,a)},this)));return t},e._$liForNavItem=function(e,a){if("string"==typeof e)return console.log("Unresolved TOC item:",e),void 0;var t=$("<li>",{role:"treeitem"}),i=$("<a>",{href:e.linkHref()}).appendTo(t);return this._$liByID[e.id]=t,t.add(i).data("item",e),e.categories&&t.addClass(e.catego ries.join(" ")),e.icon&&$("<img>",{src:this._contentPath+e.icon,alt:""}).prependTo(i),$("<s pan>",{"class":"name",html:e.name}).appendTo(i),e instanceof Section&&(t.addClass("closed hasChildren").attr("aria-expanded","false"),this._$ulForNavList(e.children,a+1) .appendTo(t)),t},e.updateSelection=function(e,a){this.$dom.find("li").removeClas s("selected").attr("aria-selected",!1);var t=this._$liByID[a.id],i=this.$dom.children("li"),n=!1;if(App.design.isLayeredSt yle&&(n=!0,t&&a.id!==this.book.landing.id||!this.book.toc.length||(a=this.book.t oc[0],t=this._$liByID[a.id]),a instanceof Section&&(i.addClass("closed").attr("aria-expanded",!1),i.is(t)))){var o=t.children("ul:first").height();o&&(this.$dom.css("overflow","hidden"),this.$ dom.css("min-height",o),this.$dom.css("overflow",null))}t&&t.addClass("selected" ).attr("aria-selected",!0).parents("li").add(n?t:null).removeClass("closed").att r("aria-expanded",!0)},e._toggleSections=function(e){var a=$(e.currentTarget).parents("li:first"),t=a.data("item"),i=a.hasClass("closed" );t instanceof Section&&(App.design.isLayeredStyle?a.removeClass("closed").attr("aria-expanded ",!0):(a.toggleClass("closed",!i).attr("aria-expanded",i),e.preventDefault())),t instanceof Topic&&"HelpViewer"in window&&"mtStatisticsIncrement"in HelpViewer&&HelpViewer.mtStatisticsIncrement(0,0,1,0)}}(),function(){var e=Topic.prototype,a=!1;flamingoQTDetect=!1,function(){return navigator.userAgent.match(/applewebkit/i)?(a=!0,void 0):"execScript"in window?(execScript('on error resume next: flamingoQTDetect = IsObject(CreateObject("QuickTimeCheckObject.QuickTimeCheck.1"))',"VBScript"),a= flamingoQTDetect,void 0):($.each($.makeArray(navigator.plugins),function(){return this.name.match(/quicktime/i)?(a=!0,!1):void 0}),void 0)}(),e.navPath=function(){return(this.parent?this.parent.navPath():[]).concat( this)},e.breadcrumbHTML=function(){var e=this.navPath(),a="rtl"===$("body").attr("dir")?"◀":"►",t=" <span class='breadcrumbArrow'>"+a+"</span> ";return e.pop(),$.map(e,function(e){return e.name}).join(t)},e.linkHref=function(){return this.is_external||this.is_hash?this.href:"#"+this.id},e.navigateTo=function(){l ocation.href=this.linkHref()},e.loadContent=function(){if(!this._content_loaded) {var e=App.bundle.URL(),a=this,t="";a.href&&$.ajax({async:!1,url:e+a.href,dataType:" html"}).done(function(a){t=a.replace(/.*<body/,"<div").replace(/\/body>.*/,"/div >"),t=t.replace(/src="/g,'src="'+e)}),t?(this.$content=$(t).addClass("apd-topic" ),this.$content.find("a[href^='http']").attr("target","_blank"),this.full_name=t his.$content.find("h1:first").text(),this.$content.attr("data-apdid",this.id).re moveAttr("id").find("a[name="+this.id+"]").remove(),this._removeSectionLinks(),t his._collapseTasks(),this._formatMovieLinks(),this._addFeedbackLink(),this._addC opyrightText(),this._content_loaded=!0):(this.$content=this._contentUnavailable( ),this._content_loaded=!1)}return this.$content},e._removeSectionLinks=function(){var e=this;this.$content.find("a:not([href^=http])").each(function(){var a,t=$(this),i=t.attr("href")||"";i.match(/^(\w+).html$/)&&(a=e.book.topicForURL (i),a||t.contents().unwrap())})},e._collapseTasks=function(){var e=this.$content.find(".Task, .task"),a=1===e.length;e.each(function(){$(this).addClass(a?"":"closed").find(" [aria-expanded]").attr("aria-expanded",a).end().find("[aria-hidden]").attr("aria -hidden",!a).end()}),$("<span>",{"class":"hideTaskBody",role:"button",text:"Hide ".loc(),"aria-label":"Hide".loc()}).prependTo(e),$("<span>",{"class":"showTaskBo dy",role:"button",text:"Show".loc(),"aria-label":"Show".loc()}).prependTo(e)},e. _addFeedbackLink=function(){if(this.book.collect_feedback){var e=$("<div>",{"class":"Feedback"}).appendTo(this.$content),a=$.param({bookID:thi s.book.title,topicTitle:this.name,appVersion:this.book.version||"",build:this.bo ok.build_id||"",source:$.browser.helpviewer?"helpviewer":"browser"});$("<span>", {"class":"LinkFeedback",text:"Was this page helpful?".loc()}).appendTo(e),$("<a>",{text:"Send feedback.".loc(),href:"http://help.apple.com/feedbackR1/English/pgs/fdbck_form.php?"+a,target:"_blank"}).click($.proxy(function(){$(this.book).trigger("feedback", this)},this)).appendTo(e)}},e._formatMovieLinks=function(){var e=this;this.$content.find(".LinkAppleWebMovie, .movie").each(function(){var t=$(this),i=t.find("a:first"),n=i.attr("href"),o=i.text(),s=e._getMovieURLFromU RLParam(n);a&&s?(i.parent().is("p")||i.wrap("<p class='p'>"),$("<a>",{title:o}).prependTo(t),t.find("a").attr({href:s,target:"h v_overlay_small"})):t.remove()})},e._getMovieURLFromURLParam=function(e){var a=null;if(e.match(/.*\?movie=/)){e=e.replace(/.*\?movie=/,"");var t=App.bundle.URL()+"movies/"+e+".json";a=this._getMovieURLFromJSONFileAtURL(t)} return a},e._getMovieURLFromJSONFileAtURL=function(e){var a=null;return $.browser.msie&&navigator.userAgent.match(/x64/i)?a:(navigator.onLine&&$.ajax({ async:!1,dataType:"json",url:e,success:function(e){a=e.length?e[0].url:e.url},er ror:function(){console.log(e+" could not be loaded")}}),a)},e._addCopyrightText=function(){if(this.book.copyright_text){var e=$("<div>",{"class":"copyrightTagline",html:this.book.copyright_text}),a=this. $content.find(".contentCell:last");
a.length?a.append(e):this.$content.append(e)}},e._contentUnavailable=function(){ var e=$("<div>",{id:this.id,"class":"apd-topic"});if($("<img>",{"class":"topicIcon" ,src:App.resourcePath+"images/[email protected]"}).appendTo(e),$("<h1>",{text:"TOPIC _UNAVAILABLE".loc()}).appendTo(e),$.browser.helpviewer&&location.protocol.match( /file/)){var a=$("<div>",{"class":"body conbody"}).appendTo(e);a.append($.map("CONNECT_TO_INTERNET".loc().split("\n"),f unction(e){return $("<p>",{"class":"p",text:e})})),"mtStatisticsIncrement"in HelpViewer&&HelpViewer.mtStatisticsIncrement(1,0,0,0)}return e}}(),APD.translations=[{meta:{isoCodes:["ar"],isoName:"Arabic",name:"Ø§Ù„Ø¹Ø±Ø ¨ÙŠØ©"},ui:{TOPIC_UNAVAILABLE:"الموضوع المØدد غير متوفر Øاليًا.",CONNECT_TO_INTERNET:'تأكد من الاتصال بالإنترنت. للØصول على مساعدة، اختر قائمة Apple > تفضيلات النظام، وانقر على الشبكة، ثم انقر على "ساعدني".\nإذا كنت متصلاً بالإنترنت، ولا يظهر المØتوى بعد، فØاول مرة أخرى لاØقًا.',"%@ Search Results":"%@ نتيجة (نتائج) بØØ«","Apple applications":"تطبيقات Apple",Cancel:"إلغاء","Change Language":"تغيير اللغة",Close:"إغلاق","Featured application help":"تعليمات تطبيقات مميّزة","Go to the homepage":"الانتقال إلى الصفØØ© الرئيسية","Help for:":"تعليمات لـ:",Hide:"إخفاء",Home:"الشاشة الرئيسية","Loading latest help...":"يتم الآن تØميل Ø£Øدث التعليمات…","Other applications":"تطبيقات أخرى","Recent applications":"Ø£Øدث التطبيقات",Search:"بØØ«","Send feedback.":"أرسل تغذية مرتدّة.","Show all":"إظهار الكل","Show less":"إظهار أقل","Show the previous page":"إظهار الصفØØ© السابقة","Show the next page":"إظهار الصفØØ© التالية",Show:"إظهار","Was this page helpful?":"هل كانت هذه الصفØØ© مفيدة؟"}},{meta:{isoCodes:["ca"],isoName:"Catalan",name:"Català "},ui:{TOPIC_UNAVAILABLE:"El tema seleccionat no està disponible ara",CONNECT_TO_INTERNET:"Comproveu que teniu connexió a Internet. Per obtenir ajuda sobre com establir connexió, seleccioneu el menú Apple > Preferències del Sistema i feu clic a Xarxa i, després, a Assistent.\nSi esteu connectat a Internet però el contingut no apareix, proveu-ho de nou més endavant.","%@ Search Results":"%@ resultats","Apple applications":"Aplicacions d'Apple",Cancel:"Cancel·lar","Change Language":"Canviar idioma",Close:"Tancar","Featured application help":"Ajuda de l'aplicació destacada","Go to the homepage":"Vés a la pà gina inicial","Help for:":"Ajuda de:",Hide:"Ocultar",Home:"Inici","Loading latest help...":"Carregant l'ajuda més actualitzada…","Other applications":"Altres aplicacions","Recent applications":"Aplicacions recents",Search:"Buscar","Send feedback.":"Enviar opinió.","Show all":"Mostrar-ho tot","Show less":"Mostrar menys","Show the previous page":"Mostra la pà gina anterior","Show the next page":"Mostra la pà gina següent",Show:"Mostrar","Was this page helpful?":"Us ha resultat útil aquesta pà gina?"}},{meta:{isoCodes:["cs"],isoName:"Czech",name:"ÄŒeÅ¡tina"},ui:{TOPIC_UNA VAILABLE:"Vybrané téma nenà k dispozici",CONNECT_TO_INTERNET:"UjistÄ›te se, že jste pÅ™ipojeni k Internetu. Chcete-li nápovÄ›du pro pÅ™ipojenÃ, použijte pÅ™Ãkaz PÅ™edvolby systému z nabÃdky Apple, kliknÄ›te na SÃÅ¥ a poté na „Průvodce“.\nJste-li pÅ™ipojeni k Internetu, avÅ¡ak obsah se pÅ™esto nezobrazuje, zkuste to znovu pozdÄ›ji.","%@ Search Results":"Výsledky hledánÃ: %@","Apple applications":"Aplikace Apple",Cancel:"ZruÅ¡it","Change Language":"ZmÄ›nit jazyk",Close:"ZavÅ™Ãt","Featured application help":"NápovÄ›da pro doporučené aplikace","Go to the homepage":"OtevÅ™Ãt domovskou stránku","Help for:":"NápovÄ›da pro:",Hide:"Skrýt",Home:"Plocha","Loading latest help...":"NačÃtánà nejnovÄ›jÅ¡Ã nápovÄ›dy…","Other applications":"Jiné aplikace","Recent applications":"Poslednà aplikace",Search:"Hledat","Send feedback.":"SdÄ›lte nám svůj názor.","Show all":"Zobrazit vÅ¡e","Show less":"Zobrazit ménÄ›","Show the previous page":"Zobrazit pÅ™edchozà stránku","Show the next page":"Zobrazit dalÅ¡Ã stránku",Show:"Zobrazit","Was this page helpful?":"Pomohla vám tato stránka?"}},{meta:{isoCodes:["da"],isoName:"Danish",name:"Dansk"},ui:{TOPIC_UN AVAILABLE:"Det valgte emne er utilgængeligt",CONNECT_TO_INTERNET:"Sørg for, at der er oprettet forbindelse til internettet. Vælg Apple > Systemindstillinger, klik pÃ¥ Netværk, og klik derefter pÃ¥ “Hjælp mig” for at fÃ¥ hjælp med at oprette forbindelse.\nHvis der er forbindelse til internettet, og indholdet stadig ikke vises, kan du prøve igen senere.","%@ Search Results":"%@ søgeresultater","Apple applications":"Apple-programmer",Cancel:"Annuller","Change Language":"Skift sprog",Close:"Luk","Featured application help":"Viste program","Go to the homepage":"GÃ¥ til hjemmesiden","Help for:":"Hjælp til:",Hide:"Skjul",Home:"Hjem","Loading latest help...":"Indlæser den nyeste hjælp…","Other applications":"Andre programmer","Recent applications":"Seneste programmer",Search:"Søg","Send feedback.":"Send feedback.","Show all":"Vis alle","Show less":"Vis færre","Show the previous page":"Vis forrige side","Show the next page":"Vis næste side",Show:"Vis","Was this page helpful?":"Var denne side nyttig?"}},{meta:{isoCodes:["de"],isoName:"German",name:"Deutsch"},ui:{TOPIC_UN AVAILABLE:"Das gewählte Thema ist derzeit nicht verfügbar",CONNECT_TO_INTERNET:"Vergewissern Sie sich, dass eine Verbindung zum Internet besteht. Wählen Sie „Apple“ > „Systemeinstellungen“, klicken Sie auf „Netzwerk“ und dann auf „Assistent“, wenn Sie Hilfe benötigen.\nWenn Sie mit dem Internet verbunden sind, den Inhalt aber dennoch nicht sehen können, versuchen Sie es zu einem späteren Zeitpunkt erneut.","%@ Search Results":"%@ Suchergebnisse","Apple applications":"Apple-Programme",Cancel:"Abbrechen","Change Language":"Sprache wechseln",Close:"Schließen","Featured application help":"Empfohlenes Programm-Hilfe","Go to the homepage":"Zur Homepage","Help for:":"Hilfe für:",Hide:"Ausblenden",Home:"Startseite","Loading latest help...":"Die neuste Hilfe wird geladen ...","Other applications":"Andere Programme","Recent applications":"Benutzte Programme",Search:"Suchen","Send feedback.":"Feedback senden.","Show all":"Alle einblenden","Show less":"Weniger einblenden","Show the previous page":"Nächste Seite einblenden","Show the next page":"Vorherige Seite einblenden",Show:"Einblenden","Was this page helpful?":"War diese Seite nützlich?"}},{meta:{isoCodes:["el"],isoName:"Greek",name:"Ελληνικά"},u i:{TOPIC_UNAVAILABLE:"Αυτήν τη στιγμή, το επιλεγμÎνο θÎμα δεν είναι διαθÎσιμο",CONNECT_TO_INTERNET:"Βεβαιωθείτε ότι είστε συνδεδεμÎνοι στο Διαδίκτυο. Για βοήθεια με τη σύνδεση, επιλÎξτε το μενού Apple > «Προτιμήσεις συστήματος», κάντε κλικ στο «Δίκτυο» και μετά στο «ΘÎλω βοήθεια».\nΕάν συνδεθείτε στο Διαδίκτυο και το περιεχόμενο δεν εμφανίζεται ακόμη, δοκιμάστε ξανά αργότερα.","%@ Search Results":"%@ αποτελÎσματα αναζήτησης","Apple applications":"ΕφαρμογÎÏ‚ Apple",Cancel:"Ακύρωση","Change Language":"Αλλαγή γλώσσας",Close:"Κλείσιμο","Featured application help":"Βοήθεια προτεινόμενων εφαρμογών","Go to the homepage":"Μετάβαση στην αρχική σελίδα","Help for:":"Βοήθεια για:",Hide:"Απόκρυψη",Home:"Αφετηρία","Loading latest help...":"Γίνεται φόρτωση της πιο πρόσφατης Βοήθειας…","Other applications":"Άλλες εφαρμογÎÏ‚","Recent applications":"Πρόσφατη εφαρμογή",Search:"Αναζήτηση","Send feedback.":"Στείλετε σχόλια.","Show all":"Εμφάνιση όλων","Show less":"Εμφάνιση λιγότερων","Show the previous page":"Εμφάνιση της προηγούμενης σελίδας","Show the next page":"Εμφάνιση της επόμενης σελίδας",Show:"Εμφάνιση","Was this page helpful?":"Ήταν χρήσιμη αυτή η σελίδα;"}},{meta:{isoCodes:["en-us","en-gb","en-ca","en-ie","en"],isoName :"English",name:"English"},ui:{TOPIC_UNAVAILABLE:"The selected topic is currently unavailable",CONNECT_TO_INTERNET:"Make sure you’re connected to the Internet. For help connecting, choose Apple menu > System Preferences, click Network, and click “Assist me.”\nIf you’re connected to the Internet, and the content still doesn’t appear, try again later.","%@ Search Results":"%@ Search Results","Apple applications":"Apple applications",Cancel:"Cancel","Change Language":"Change Language",Close:"Close","Featured application help":"Featured application help","Go to the homepage":"Go to the homepage","Help for:":"Help for:",Hide:"Hide",Home:"Home","Loading latest help...":"Loading latest help...","Other applications":"Other applications","Recent applications":"Recent applications",Search:"Search","Send feedback.":"Send feedback.","Show all":"Show all","Show less":"Show less","Show the previous page":"Show the previous page","Show the next page":"Show the next page",Show:"Show","Was this page helpful?":"Was this page helpful?"}},{meta:{isoCodes:["es"],isoName:"Spanish",name:"Español"},ui:{TOPIC _UNAVAILABLE:"El tema seleccionado no está disponible en estos momentos",CONNECT_TO_INTERNET:"Asegúrese de que está conectado a Internet. Si necesita ayuda para conectarse, seleccione menú Apple > Preferencias del Sistema, haga clic en Red y, a continuación, haga clic en Asistente.\nSi ya está conectado a Internet pero no se muestra el contenido del tema, inténtelo de nuevo más tarde.","%@ Search Results":"%@ resultados","Apple applications":"Aplicaciones de Apple",Cancel:"Cancelar","Change Language":"Cambiar idioma",Close:"Cerrar","Featured application help":"Ayuda de la aplicación destacada","Go to the homepage":"Ir a la página de inicio","Help for:":"Ayuda de:",Hide:"Ocultar",Home:"Inicio","Loading latest help...":"Cargando la ayuda más reciente…","Other applications":"Otras aplicaciones","Recent applications":"Aplicaciones recientes",Search:"Buscar","Send feedback.":"Enviar opinión.","Show all":"Mostrar todo","Show less":"Mostrar menos","Show the previous page":"Mostrar la página anterior","Show the next page":"Mostrar la página siguiente",Show:"Mostrar","Was this page helpful?":"¿Le ha resultado útil esta página?"}},{meta:{isoCodes:["fi"],isoName:"Finnish",name:"Suomi"},ui:{TOPIC_UN AVAILABLE:"Valittu aihe ei ole tällä hetkellä käytettävissä",CONNECT_TO_INTERNET:"Varmista, että olet yhteydessä internetiin. Jos tarvitset apua yhteyden muodostamisessa, valitse Omenavalikko > Järjestelmäasetukset, osoita Verkko ja osoita Avusta.\nJos olet yhteydessä internetiin, mutta sisältö ei silti tule näkyviin, yritä myöhemmin uudelleen.","%@ Search Results":"%@ - hakutulokset","Apple applications":"Applen ohjelmat",Cancel:"Kumoa","Change Language":"Vaihda kieltä",Close:"Sulje","Featured application help":"Esittelyssä olevan ohjelman ohje","Go to the homepage":"Siirry kotisivulle","Help for:":"Ohje:",Hide:"Kätke",Home:"Koti","Loading latest help...":"Ladataan uusinta ohjetta…","Other applications":"Muut ohjelmat","Recent applications":"Äskeiset ohjelmat",Search:"Etsi","Send feedback.":"Lähetä palautetta.","Show all":"Näytä kaikki","Show less":"Näytä vähemmän","Show the previous page":"Näytä edellinen sivu","Show the next page":"Näytä seuraava sivu",Show:"Näytä","Was this page helpful?":"Oliko tästä sivusta apua?"}},{meta:{isoCodes:["fr"],isoName:"French",name:"Français"},ui:{TOPIC_UN AVAILABLE:"La rubrique sélectionnée est actuellement indisponible.",CONNECT_TO_INTERNET:"Assurez-vous d’être connecté à Internet. Pour obtenir de l’aide pour vous connecter, choisissez le menu Pomme > Préférences Système, cliquez sur Réseau puis sur Assistant.\nSi vous êtes connecté à Internet, mais que le contenu ne s’affiche toujours pas, réessayez ultérieurement.","%@ Search Results":"%@ résultats","Apple applications":"Applications Apple",Cancel:"Annuler","Change Language":"Changer de langue",Close:"Fermer","Featured application help":"Aide de l’application actuelle","Go to the homepage":"Aller à la page d'accueil","Help for:":"Aide pour :",Hide:"Masquer",Home:"Accueil","Loading latest help...":"Chargement de l’Aide la plus récente… ","Other applications":"Autres applications","Recent applications":"Applications récentes",Search:"Rechercher","Send feedback.":"Envoyer des commentaires.","Show all":"Affichage total","Show less":"Affichage partiel","Show the previous page":"Afficher la page précédente","Show the next page":"Afficher la page suivante",Show:"Afficher","Was this page helpful?":"Avez-vous trouvé cette page utile ?"}},{meta:{isoCodes:["he"],isoName:"Hebrew",name:"עברית"},ui:{TOPIC_UNAVA ILABLE:"×”× ×•×©× ×©× ×‘×—×¨ ××™× ×• זמין כעת.",CONNECT_TO_INTERNET:"ודא/×™ ×©×”×™× ×š מחובר/ת ×œ××™× ×˜×¨× ×˜. לעזרה ×‘× ×•×©× התחברות, בחר/×™ תפריט Apple > ״העדפות המערכת״, לחץ/×™ על ״רשת״ ובחרי ״עזור לי״.\nאם ×”×™× ×š מחובר/ת ×œ××™× ×˜×¨× ×˜, ובכל זאת התוכן ××™× ×• מופיע, × ×¡×”/×™ שוב מאוחר יותר.","%@ Search Results":"%@ תוצאות","Apple applications":"יישומי Apple",Cancel:"ביטול","Change Language":"החלף/×™ שפה",Close:"סגור","Featured application help":"עזרה ×‘× ×•×©× היישומים המומלצים","Go to the homepage":"עבור אל דף הבית","Help for:":"עזרה ×‘× ×•×©×:",Hide:"הסתר",Home:"בית","Loading latest help...":"טוען את קבצי העזרה החדשים ביותר…","Other applications":"יישומים אחרים","Recent applications":"יישומים ××—×¨×•× ×™×",Search:"חיפוש","Send feedback.":"שלח/×™ משוב.","Show all":"הצג הכול","Show less":"הצג פחות","Show the previous page":"הצג את העמוד הקודם","Show the next page":"הצג את העמוד הבא",Show:"הצג","Was this page helpful?":"האם עמוד ×–×” עזר לך?"}},{meta:{isoCodes:["hr"],isoName:"Croatian",name:"Hrvatski"},ui:{TOPIC_U NAVAILABLE:"Odabrana tema trenutno nije dostupna",CONNECT_TO_INTERNET:'Provjerite jeste li spojeni na internet. Za pomoć pri spajanju odaberite Apple izbornik > Postavke sustava, kliknite na Mreža i zatim na "Pomoć".\nAko ste spojeni na internet i sadržaj se svejedno ne pojavljuje, pokuÅ¡ajte ponovno kasnije.',"%@ Search Results":"Rezultata pretraživanja: %@","Apple applications":"Appleove aplikacije",Cancel:"Odustani","Change Language":"Promijeni jezik",Close:"Zatvori","Featured application help":"Pomoć za ponuÄ‘ene aplikacije","Go to the homepage":"Prijelaz na početnu stranicu","Help for:":"Pomoć za:",Hide:"Sakrij",Home:"Početna stranica","Loading latest help...":"Učitavanje najnovijih datoteka pomoći…","Other applications":"Ostale aplikacije","Recent applications":"Novije aplikacije",Search:"Pretraži","Send feedback.":"PoÅ¡alji povratne informacije.","Show all":"Prikaži sve","Show less":"Prikaži manje","Show the previous page":"Prikaži prethodnu stranicu","Show the next page":"Prikaži sljedeću stranicu",Show:"Prikaži","Was this page helpful?":"Je li vam ova stranica pomogla?"}},{meta:{isoCodes:["hu"],isoName:"Hungarian",name:"Magyar"},ui:{TOPIC _UNAVAILABLE:"A kijelölt témakör jelenleg nem érhetÅ‘ el.",CONNECT_TO_INTERNET:"GyÅ‘zÅ‘djön meg róla, hogy csatlakozik az internethez. Ha segÃtségre van szüksége, válassza az Apple menü > RendszerbeállÃtások menüpontot, kattintson a Hálózat, majd a „SegÃtség kérése” elemre.\nHa csatlakozik az internethez, és a tartalom továbbra sem jelenik meg, próbálja meg késÅ‘bb.","%@ Search Results":"%@ keresési eredmény","Apple applications":"Apple alkalmazások",Cancel:"Mégsem","Change Language":"Nyelv módosÃtása",Close:"Bezárás","Featured application help":"Kiemelt alkalmazássúgó","Go to the homepage":"Ugrás a kezÅ‘dlapra","Help for:":"Súgó a következÅ‘höz:",Hide:"Elrejtés",Home:"FÅ‘gomb","Loading latest help...":"Legújabb súgó betöltése…","Other applications":"Egyéb alkalmazások","Recent applications":"Legutóbbi alkalmazások",Search:"Keresés","Send feedback.":"Visszajelzés küldése","Show all":"Az összes megjelenÃtése","Show less":"Kevesebb megjelenÃtése","Show the previous page":"ElÅ‘zÅ‘ oldal megjelenÃtése","Show the next page":"KövetkezÅ‘ oldal megjelenÃtése",Show:"MegjelenÃtés","Was this page helpful?":"Hasznosnak találta ezt az oldalt?"}},{meta:{isoCodes:["id"],isoName:"Indonesian",name:"Bahasa Indonesia"},ui:{TOPIC_UNAVAILABLE:"Topik yang dipilih saat ini tidak tersedia",CONNECT_TO_INTERNET:"Pastikan Anda terhubung ke Internet. Untuk bantuan dalam menghubungkan, pilih menu Apple > Preferensi Sistem, klik Jaringan, dan klik “Bantu saya.”\nJika Anda terhubung ke Internet, dan konten masih tidak muncul, coba lagi nanti.","%@ Search Results":"%@ Hasil Pencarian","Apple applications":"Aplikasi Apple",Cancel:"Batal","Change Language":"Ubah Bahasa",Close:"Tutup","Featured application help":"Fitur bantuan aplikasi","Go to the homepage":"Kunjungi halaman rumah","Help for:":"Bantuan untuk:",Hide:"Sembunyikan",Home:"Rumah","Loading latest help...":"Memuat bantuan terbaru…","Other applications":"Aplikasi lain","Recent applications":"Aplikasi terbaru",Search:"Cari","Send feedback.":"Kirim umpan balik.","Show all":"Tampilkan semua","Show less":"Tampilkan sebagian","Show the previous page":"Tampilkan halaman sebelumnya","Show the next page":"Tampilkan halaman berikutnya",Show:"Tampilkan","Was this page helpful?":"Apakah halaman ini membantu?"}},{meta:{isoCodes:["it"],isoName:"Italian",name:"Italiano"},ui:{TOPI C_UNAVAILABLE:"L'argomento selezionato non è al momento disponibile.",CONNECT_TO_INTERNET:"Assicurati di essere connesso a Internet. Per assistenza su come configurare la connessione a Internet, scegli menu Apple > Preferenze di Sistema, fai clic su Network, quindi su “Aiutami”.\nSe sei connesso a Internet, ma non puoi visualizzare il contenuto, riprova più tardi.","%@ Search Results":"%@ risultati di ricerca","Apple applications":"Applicazioni Apple",Cancel:"Annulla","Change Language":"Cambia lingua",Close:"Chiudi","Featured application help":"Aiuto applicazione in primo piano","Go to the homepage":"Vai alla pagina iniziale","Help for:":"Aiuto per:",Hide:"Nascondi",Home:"Inizio","Loading latest help...":"Carico argomento dell'aiuto più recente…","Other applications":"Altre applicazioni","Recent applications":"Applicazioni recenti",Search:"Cerca","Send feedback.":"Invia commenti.","Show all":"Mostra tutto","Show less":"Mostra meno","Show the previous page":"Mostra pagina precedente","Show the next page":"Mostra pagina successiva",Show:"Mostra","Was this page helpful?":"Hai trovato utile questa pagina?"}},{meta:{isoCodes:["ja"],isoName:"Japanese",name:"日本語"},ui:{TOPI C_UNAVAILABLE:"選択したトピックは現在利用㠁§ãã¾ã›ã‚“",CONNECT_TO_INTERNET:"インターム1;ットに接続していることを確認㠁—てください。接続について調べたã&# 129;„ときは、アップルメニュー＞「シスム†ãƒ 環境è¨å®šã€ã¨é¸æŠžã—、「ネットワー㠂¯ã€ã‚’クリックしてから「アシスタント」 ;をクリックします。\nã‚¤ãƒ³ã‚¿ãƒ¼ãƒãƒƒãƒˆã«æ Ž¥ç¶šã—ているのにコンテンツが表示ã&# 129;•ã‚Œãªã„å ´åˆã¯ã€å¾Œã§ã‚„ã‚Šç›´ã—ã¦ãã 9; さい。","%@ Search Results":"%@ 件の検索結果","Apple applications":"Apple アプリケーション",Cancel:"ã‚ャンセル","Change Language":"言語を変更",Close:"閉じる","Featured application help":"お勧めのアプリケーションヘルプ","Go to the homepage":"ホームページに移動","Help for:":"表示ä¸ã®ãƒ˜ãƒ«ãƒ—：",Hide:"éš ã™",Home:"ホーム","Loading latest help...":"最新のヘルプをèªã¿è¾¼ã¿ä¸...","Other applications":"ほかのアプリケーション","Recent applications":"最近使ったアプリケーション",Search:"æ¤œç´ ¢","Send feedback.":"フィードバックを送信","Show all":"すべてを表示","Show less":"一部を表示","Show the previous page":"前のページを表示","Show the next page":"次のページを表示",Show:"表示","Was this page helpful?":"このページは役立ちましã 9;Ÿã‹ï¼Ÿ"}},{meta:{isoCodes:["ko"],isoName:"Korean",name:"한글"},ui:{TOP IC_UNAVAILABLE:"ì„ íƒí•œ ì£¼ì œëŠ” 현재 ì‚¬ìš©í• ìˆ˜ 없습니다.",CONNECT_TO_INTERNET:"인터넷에 연결되어 있는지 확인하ì‹ì‹œì˜¤. 연결에 대한 도움말은 Apple 메뉴 > 시스템 í™˜ê²½ì„¤ì •ì„ ì„ íƒí•˜ê³ ë„¤íŠ¸ì›Œí¬ë¥¼ 클ë¦í•œ 다음 “도와주세요”를 클ë¦í•˜ì‹ì‹œì˜¤.\n인터넷에 연결되어 있지만 해당 ì½˜í…ì¸ ê°€ ì—¬ì „ížˆ 나타나지 않는 경우 나중에 다시 시도해보ì‹ì‹œì˜¤.","%@ Search Results":"%@개의 검색 ê²°ê³¼","Apple applications":"Apple 응용 프로그램",Cancel:"취소","Change Language":"언어 변경",Close:"닫기","Featured application help":"추천 응용 프로그램 도움말","Go to the homepage":"홈페이지로 이동","Help for:":"도움말:",Hide:"가리기",Home:"홈","Loading latest help...":"ìµœì‹ ë„ì›€ë§ 불러오는 중...","Other applications":"기타 응용 프로그램","Recent applications":"최근 사용 응용 프로그램",Search:"검색","Send feedback.":"피드백 보내기.","Show all":"모두 보기","Show less":"간단히 보기",Show:"보기","Show the previous page":"ì´ì „ 페이지 보기","Show the next page":"다음 페이지 보기","Was this page helpful?":"이 페이지가 도움이 되셨습니까?"}},{meta:{isoCodes:["ms"],isoName:"Malaysian",name:"Bahas a Malaysia"},ui:{TOPIC_UNAVAILABLE:"Topik yang dipilih tidak tersedia sekarang",CONNECT_TO_INTERNET:"Pastikan anda disambungkan ke Internet. Untuk bantuan sambungan, pilih menu Apple > Keutamaan Sistem, klik Rangkaian, dan klik “Bantu saya.”\nJika anda disambungkan ke Internet, dan kandungan masih tidak muncul, cuba lagi nanti.","%@ Search Results":"%@ Hasil Carian","Apple applications":"Aplikasi Apple",Cancel:"Batal","Change Language":"Tukar Bahasa",Close:"Tutup","Featured application help":"Bantuan untuk aplikasi yang ditampilkan","Go to the homepage":"Pergi ke laman utama","Help for:":"Bantuan untuk:",Hide:"Sembunyikan",Home:"Utama","Loading latest help...":"Memuatkan bantuan terbaru...","Other applications":"Aplikasi lain","Recent applications":"Aplikasi terbaru",Search:"Cari","Send feedback.":"Hantar maklum balas.","Show all":"Tunjukkan semua","Show less":"Tunjukkan sedikit","Show the previous page":"Tunjukkan halaman sebelumnya","Show the next page":"Tunjukkan halaman seterusnya",Show:"Tunjukkan","Was this page helpful?":"Adakah halaman ini membantu?"}},{meta:{isoCodes:["nl"],isoName:"Dutch",name:"Nederlands"},ui:{TOPI C_UNAVAILABLE:"Het geselecteerde onderwerp is momenteel niet beschikbaar",CONNECT_TO_INTERNET:"Controleer of er verbinding is met het internet. Als u hulp nodig hebt, kiest u Apple-menu > 'Systeemvoorkeuren' en klikt u vervolgens op 'Netwerk' en 'Assistentie'.\nAls u verbinding hebt met het internet en de inhoud nog steeds niet wordt weergegeven, probeert u het later nogHi Mac Attack,
My computer will not disconnect from the internet. It seems to find a clone router and continues even when I shut down and unplug my my own home iy
Your main question was 'chopped' in the title. Please reply in the body of a reply box with the full question and anything you have tried. And no, the long report was not helpful .
If the same website is opening each time you launch a browser (Safari?) hold down the shift key as you launch to prevent previous pages from opening.
Have a look at your settings in Safari > Preferences. Especially General and Privacy.
Reset Safari to remove cookies and other stored data.
System Preferences > General
Have a look at your settings in System Preferences > Security & Privacy.
Call back with more questions.
Regards,
Ian -
NVIDIA Issues; hitting the video card hangs the machine
Hello everybody, this could easily be placed under the Kernel and Hardware forum, but this one suits my experience level better. I tried
searching for some similar issues to what I am having, but wasn't able to come up with anything. (Perhaps I was an unknown keyword off in my searches. )
Additionally, thanks in advance for any help! I'm pretty much out of ideas short of replacing some hardware.
My problem is that whenever my desktop displays anything that is graphically intensive, it freezes. I first experienced this while I had Slackware 13.1 installed when trying to run Minecraft. I had been running it successfully for a month or two when it hung while I was playing. I switched over to Arch in the hopes that it would be easier for me to troubleshoot the problem. This was a few months ago, and I've not been able to figure it out.
I'm running with an i7 930 CPU, GTX 480 video card, and six gigs of RAM. My xorg.conf is below:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 ([email protected]) Mon Apr 18 15:14:00 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
I dug through my logs and the only strange thing I found was in kernel.log:
Jul 3 13:56:43 localhost kernel: [ 101.297777] NVRM: GPU at 0000:03:00.0 has fallen off the bus.
For what it's worth, here is my Xorg.0.conf (but the only error is related to my keyboard, which actually works fine):
[ 28.765]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[ 28.766] X Protocol Version 11, Revision 0
[ 28.766] Build Operating System: Linux 2.6.38-ARCH x86_64
[ 28.766] Current Operating System: Linux myhost 2.6.39-ARCH #1 SMP PREEMPT Mon Jun 27 21:26:22 CEST 2011 x86_64
[ 28.766] Kernel command line: root=/dev/disk/by-uuid/53882ab2-b171-4117-a8a2-6ec984ace8e2 ro
[ 28.767] Build Date: 30 May 2011 08:18:15AM
[ 28.767]
[ 28.767] Current version of pixman: 0.22.0
[ 28.767] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 28.768] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 28.770] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 3 14:20:49 2011
[ 28.800] (==) Using config file: "/etc/X11/xorg.conf"
[ 28.801] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 28.817] (==) ServerLayout "Layout0"
[ 28.817] (**) |-->Screen "Screen0" (0)
[ 28.817] (**) | |-->Monitor "Monitor0"
[ 28.817] (**) | |-->Device "Device0"
[ 28.817] (**) |-->Input Device "Keyboard0"
[ 28.817] (**) |-->Input Device "Mouse0"
[ 28.817] (==) Automatically adding devices
[ 28.817] (==) Automatically enabling devices
[ 28.837] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.837] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 28.837] Entry deleted from font path.
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 28.857] Entry deleted from font path.
[ 28.857] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 28.857] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 28.857] Entry deleted from font path.
[ 28.858] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 28.858] (==) FontPath set to:
/usr/share/fonts/misc/
[ 28.858] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 28.858] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 28.858] (WW) Disabling Keyboard0
[ 28.858] (WW) Disabling Mouse0
[ 28.858] (II) Loader magic: 0x7d3440
[ 28.858] (II) Module ABI versions:
[ 28.858] X.Org ANSI C Emulation: 0.4
[ 28.858] X.Org Video Driver: 10.0
[ 28.858] X.Org XInput driver : 12.2
[ 28.858] X.Org Server Extension : 5.0
[ 28.859] (--) PCI:*(0:3:0:0) 10de:06c0:10de:075f rev 163, Mem @ 0xdc000000/33554432, 0xc8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000df00/128, BIOS @ 0x????????/524288
[ 28.859] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 28.859] (II) LoadModule: "extmod"
[ 28.878] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 28.889] (II) Module extmod: vendor="X.Org Foundation"
[ 28.889] compiled for 1.10.2, module version = 1.0.0
[ 28.889] Module class: X.Org Server Extension
[ 28.889] ABI class: X.Org Server Extension, version 5.0
[ 28.889] (II) Loading extension MIT-SCREEN-SAVER
[ 28.889] (II) Loading extension XFree86-VidModeExtension
[ 28.889] (II) Loading extension XFree86-DGA
[ 28.889] (II) Loading extension DPMS
[ 28.889] (II) Loading extension XVideo
[ 28.889] (II) Loading extension XVideo-MotionCompensation
[ 28.889] (II) Loading extension X-Resource
[ 28.889] (II) LoadModule: "dbe"
[ 28.889] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 28.890] (II) Module dbe: vendor="X.Org Foundation"
[ 28.890] compiled for 1.10.2, module version = 1.0.0
[ 28.890] Module class: X.Org Server Extension
[ 28.890] ABI class: X.Org Server Extension, version 5.0
[ 28.890] (II) Loading extension DOUBLE-BUFFER
[ 28.890] (II) LoadModule: "glx"
[ 28.890] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 29.187] (II) Module glx: vendor="NVIDIA Corporation"
[ 29.195] compiled for 4.0.2, module version = 1.0.0
[ 29.195] Module class: X.Org Server Extension
[ 29.195] (II) NVIDIA GLX Module 275.09.07 Wed Jun 8 14:34:43 PDT 2011
[ 29.195] (II) Loading extension GLX
[ 29.195] (II) LoadModule: "record"
[ 29.195] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 29.196] (II) Module record: vendor="X.Org Foundation"
[ 29.196] compiled for 1.10.2, module version = 1.13.0
[ 29.196] Module class: X.Org Server Extension
[ 29.196] ABI class: X.Org Server Extension, version 5.0
[ 29.196] (II) Loading extension RECORD
[ 29.196] (II) LoadModule: "dri"
[ 29.196] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 29.207] (II) Module dri: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.0.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension XFree86-DRI
[ 29.207] (II) LoadModule: "dri2"
[ 29.207] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 29.207] (II) Module dri2: vendor="X.Org Foundation"
[ 29.207] compiled for 1.10.2, module version = 1.2.0
[ 29.207] ABI class: X.Org Server Extension, version 5.0
[ 29.207] (II) Loading extension DRI2
[ 29.207] (II) LoadModule: "nvidia"
[ 29.208] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.240] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 29.241] compiled for 4.0.2, module version = 1.0.0
[ 29.241] Module class: X.Org Video Driver
[ 29.246] (II) NVIDIA dlloader X Driver 275.09.07 Wed Jun 8 14:18:12 PDT 2011
[ 29.246] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 29.246] (--) using VT number 7
[ 29.255] (II) Loading sub module "fb"
[ 29.255] (II) LoadModule: "fb"
[ 29.255] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.262] (II) Module fb: vendor="X.Org Foundation"
[ 29.262] compiled for 1.10.2, module version = 1.0.0
[ 29.262] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.262] (II) Loading sub module "wfb"
[ 29.262] (II) LoadModule: "wfb"
[ 29.262] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.270] (II) Module wfb: vendor="X.Org Foundation"
[ 29.270] compiled for 1.10.2, module version = 1.0.0
[ 29.270] ABI class: X.Org ANSI C Emulation, version 0.4
[ 29.270] (II) Loading sub module "ramdac"
[ 29.270] (II) LoadModule: "ramdac"
[ 29.270] (II) Module "ramdac" already built-in
[ 29.271] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 29.271] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 29.272] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 29.272] (==) NVIDIA(0): RGB weight 888
[ 29.272] (==) NVIDIA(0): Default visual is TrueColor
[ 29.272] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 30.069] (II) NVIDIA(GPU-0): Display (AOC 2436 (CRT-1)) does not support NVIDIA 3D Vision
[ 30.069] (II) NVIDIA(GPU-0): stereo.
[ 30.070] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 480 (GF100) at PCI:3:0:0 (GPU-0)
[ 30.070] (--) NVIDIA(0): Memory: 1572864 kBytes
[ 30.070] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.02
[ 30.070] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.070] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.070] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 480 at PCI:3:0:0
[ 30.070] (--) NVIDIA(0): AOC 2436 (CRT-1)
[ 30.071] (--) NVIDIA(0): AOC 2436 (CRT-1): 400.0 MHz maximum pixel clock
[ 30.109] (II) NVIDIA(0): Assigned Display Device: CRT-1
[ 30.109] (==) NVIDIA(0):
[ 30.109] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.109] (==) NVIDIA(0): will be used as the requested mode.
[ 30.109] (==) NVIDIA(0):
[ 30.109] (II) NVIDIA(0): Validated modes:
[ 30.109] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.110] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[ 30.134] (--) NVIDIA(0): DPI set to (93, 94); computed from "UseEdidDpi" X config
[ 30.134] (--) NVIDIA(0): option
[ 30.134] (--) Depth 24 pixmap format is 32 bpp
[ 30.134] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 30.134] (II) NVIDIA: access.
[ 30.144] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 30.144] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 30.144] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 30.144] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 30.144] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 30.144] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 30.144] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 30.144] (II) NVIDIA(0): Config Options in the README.
[ 30.147] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 30.208] (II) Loading extension NV-GLX
[ 30.270] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 30.270] (==) NVIDIA(0): Backing store disabled
[ 30.270] (==) NVIDIA(0): Silken mouse enabled
[ 30.271] (**) NVIDIA(0): DPMS enabled
[ 30.271] (II) Loading extension NV-CONTROL
[ 30.271] (II) Loading extension XINERAMA
[ 30.271] (II) Loading sub module "dri2"
[ 30.271] (II) LoadModule: "dri2"
[ 30.271] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 30.272] (II) Module dri2: vendor="X.Org Foundation"
[ 30.272] compiled for 1.10.2, module version = 1.2.0
[ 30.272] ABI class: X.Org Server Extension, version 5.0
[ 30.272] (II) NVIDIA(0): [DRI2] Setup complete
[ 30.272] (==) RandR enabled
[ 30.272] (II) Initializing built-in extension Generic Event Extension
[ 30.272] (II) Initializing built-in extension SHAPE
[ 30.272] (II) Initializing built-in extension MIT-SHM
[ 30.272] (II) Initializing built-in extension XInputExtension
[ 30.272] (II) Initializing built-in extension XTEST
[ 30.272] (II) Initializing built-in extension BIG-REQUESTS
[ 30.272] (II) Initializing built-in extension SYNC
[ 30.272] (II) Initializing built-in extension XKEYBOARD
[ 30.272] (II) Initializing built-in extension XC-MISC
[ 30.272] (II) Initializing built-in extension SECURITY
[ 30.272] (II) Initializing built-in extension XINERAMA
[ 30.272] (II) Initializing built-in extension XFIXES
[ 30.272] (II) Initializing built-in extension RENDER
[ 30.272] (II) Initializing built-in extension RANDR
[ 30.272] (II) Initializing built-in extension COMPOSITE
[ 30.272] (II) Initializing built-in extension DAMAGE
[ 30.273] (II) Initializing extension GLX
[ 30.487] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 30.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.487] (II) LoadModule: "evdev"
[ 30.499] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (II) Module evdev: vendor="X.Org Foundation"
[ 30.506] compiled for 1.10.0, module version = 2.6.0
[ 30.506] Module class: X.Org XInput Driver
[ 30.506] ABI class: X.Org XInput driver, version 12.2
[ 30.506] (II) Using input driver 'evdev' for 'Power Button'
[ 30.506] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.506] (**) Power Button: always reports core events
[ 30.506] (**) Power Button: Device: "/dev/input/event1"
[ 30.530] (--) Power Button: Found keys
[ 30.530] (II) Power Button: Configuring as keyboard
[ 30.530] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 30.530] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.530] (**) Option "xkb_rules" "evdev"
[ 30.530] (**) Option "xkb_model" "evdev"
[ 30.530] (**) Option "xkb_layout" "us"
[ 30.561] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 30.561] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 30.561] (II) Using input driver 'evdev' for 'Power Button'
[ 30.561] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.561] (**) Power Button: always reports core events
[ 30.561] (**) Power Button: Device: "/dev/input/event0"
[ 30.583] (--) Power Button: Found keys
[ 30.583] (II) Power Button: Configuring as keyboard
[ 30.583] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 30.583] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 30.583] (**) Option "xkb_rules" "evdev"
[ 30.583] (**) Option "xkb_model" "evdev"
[ 30.583] (**) Option "xkb_layout" "us"
[ 30.590] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event4)
[ 30.590] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.590] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.591] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.591] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event4"
[ 30.623] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.623] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.623] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.0/input/input4/event4"
[ 30.623] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.623] (**) Option "xkb_rules" "evdev"
[ 30.624] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event5)
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[ 30.624] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[ 30.624] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[ 30.624] (**) Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event5"
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found relative axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found absolute axes
[ 30.650] (--) Logitech Logitech Illuminated Keyboard: Found keys
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as mouse
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.650] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.1/usb6/6-1/6-1:1.1/input/input5/event5"
[ 30.650] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD)
[ 30.650] (**) Option "xkb_rules" "evdev"
[ 30.650] (**) Option "xkb_model" "evdev"
[ 30.650] (**) Option "xkb_layout" "us"
[ 30.650] (EE) Logitech Logitech Illuminated Keyboard: failed to initialize for relative axes.
[ 30.650] (II) Logitech Logitech Illuminated Keyboard: initialized for absolute axes.
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[ 30.650] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[ 30.651] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/event6)
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Applying InputClass "evdev pointer catchall"
[ 30.651] (II) Using input driver 'evdev' for 'Microsoft Microsoft Optical Mouse with Tilt Wheel'
[ 30.651] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: always reports core events
[ 30.651] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: Device: "/dev/input/event6"
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found 9 mouse buttons
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found scroll wheel(s)
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found relative axes
[ 30.676] (--) Microsoft Microsoft Optical Mouse with Tilt Wheel: Found x and y relative axes
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Configuring as mouse
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: Adding scrollwheel support
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: YAxisMapping: buttons 4 and 5
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 30.676] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb7/7-2/7-2:1.0/input/input6/event6"
[ 30.676] (II) XINPUT: Adding extended input device "Microsoft Microsoft Optical Mouse with Tilt Wheel" (type: MOUSE)
[ 30.676] (II) Microsoft Microsoft Optical Mouse with Tilt Wheel: initialized for relative axes.
[ 30.676] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) keeping acceleration scheme 1
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration profile 0
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration factor: 2.000
[ 30.677] (**) Microsoft Microsoft Optical Mouse with Tilt Wheel: (accel) acceleration threshold: 4
[ 30.677] (II) config/udev: Adding input device Microsoft Microsoft Optical Mouse with Tilt Wheel (/dev/input/mouse0)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.677] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 30.677] (II) No input driver/identifier specified (ignoring)
[ 30.680] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 30.680] (II) No input driver/identifier specified (ignoring)
The more I investigate, the more I feel like this could be a hardware problem. I checked the CPU temp first, but it only reaches ~32 degrees celsius when the system hangs, so I doubt that's the cause. I've checked the cables (power and otherwise) between everything in my box, and it's all solid. I've also taken the sides off, thinking it my be an air flow issue, but that didn't solve it either.
On the software side of things, I've got nvidia, nvidia-utils, and lib32-nvidia-utils installed and they aren't popping any errors that I can see. When I run glxinfor or glxgears, nothing happens, the terminal just prompts me for input (which is actually an improvement, in Slackware, they hung the machine).
Again, any help on this issue is greatly appreciated, I'm at my wit's end about it.I had a similar problem that turned out to be the graphics card working itself loose. So, if you haven't already, try taking it out, cleaning the contacts and plugging it back in. Worth a try and worked for me
Also, Xorg 1.10.2 & the nvidia proprietary driver don't seem to be in conflict for me so I think williewillus is mistaken. -
AMD dual core 64 X2 and Opteron 1**; what motherboard.
Hi to everybody, my name is Mauro and I am Italian. I have had for many years a lot of mobos MSI that are shown always reliable and with really excellent utility. An example the LiveUpdate that unlike utility of other brand is very comfortable and reliable. Currently I have a system AMD 64 X2 3800+ stepE4 with Asus A8N SLI Premium and memory RAM G.Skill PC4000 (chip Samsung UCCC) F1-4000USU2-2GBHZ PC4000. I have many problems of stability and I would want to return to the brand MSI. I use the PC as Workstation I am not interested to the SLI and I would want soon to pass to the CPU Opteron 1 * * dual core. The customer care G.Skill has reported that the brands of reference for the development of the forms are the MSI and few others. You would know me to suggest a complete mainboard in the endowments, silent and compatible with the CPU from me you quote. How VGA I have both chip ATI X700 Silent Pipes 256Mb or NVIDIA 6600 always silent pipes 256Mb. I am not interested to overclock. I am observing with attention the RD480Neo2 and other mobo with chipset NForce Ultra K8N Neo4 Platinum. Thanks for your share and suggestions.
MauroQuote from: Steve F. on 11-January-06, 03:04:05
Skippy, that's changing fast. Probably most major manufacturers are now explicitly supporting the Opteron.
Even MSI is getting there: K8N Diamond Plus
Hi,
To a careful study I have discovered that perhaps my Asus A8NSLIPremium has a problem that Asus is resolving. However I have asked to one friend of mine to make a will the MSI K8N Diamond Plus; in Germany it is already available some exemplary. The fact that the development has been made really with the Ram DDR that I have purchased (the G.Skill PC4000) it is a very important factor for the stability of a system. You introduces then with a good section of feeding to 4 phases it is very important. Certainly I am not interested to the characteristics of overclock but a Ferrari is not purchased only for racing. I have not told you that in so many years I have almost always had 2 brands that have always guaranteed me reliability: Abit and MSI. Objectively now that have tried also a lot of Asuses (5) I are not fully satisfied. For instance the Utility: LiveUpdate2 gave me reliability in the update of the bios (operation that finishes in DOS); the utility AsusUpdate because of a bug in the summer '05 are cost me 3 MB (update that departs in auto and it finishes in Windows). Resulted not could remain without MB I have had to purchase other identical MB. And treating itself of corruption of bios no guarantee. I have also discarded Tyan because it accepts only certified RAM DDR and their support it doesn't guarantee the operation with my DDR G.SKILL. Now that are in game I don't sell certain the DDR!
Mauro
Maybe you are looking for
-
How do I move my itunes account from one country to another?
How do I move my itunes account from one country to another? I set up my itunes account in the United States and now I live in England. I would like to transfer my purchases from my US account to my British account and then download them onto my ne
-
Hi, I recently purchased a TV show on my Mac, opted not to download it due to size and kept it in iCloud to stream. It appears in the Videos app on my iPhone 5S but not on my iPad Air. It shows the first two seasons only on my iPad Air but the recent
-
Access database issue in SQL Plus
Hi Friends, I download a oracle 10g to install sql Plus without create database. (I download client and does not find SQL Plus) I can ping database server from client PC and also set up a TNS. However I got a error ORA 12504 --TNS:listener was not st
-
Hi, I have 2 java classes A.java B.java ### A.java ### import B; public class A public static void main(String[] args) public class B public void foo() when I compile B , it works fine, but when i compile A. it gives following error '.' expected why
-
Hi, I could not create an external content type in SharePoint designer. I want to fetch my SQL Server table into SP list. Here's my Previous Post on the same topic w/o any success. I m not sure if my BCS is corrupt altogether but want to test out ev