The optic exit doesn't work correctly K8N Neo Platinium

Hello
I am French and I have just acquired a Mother Board MSI K8N Neo Platiniums
Of that someone uses the exit Optic Spidf.
There is a problem with, she is restores sounds of Windows as well as the reading of the MP3 well.
But if one connects the exit of a map TV on the entrance Line In, the sound is play only on the exit Line Out, end not on the Optic exit.
On my old mother board Abit NF7S the sound play correctly on the Optic exit.
Of that someone to this problem.
:shy:It is domage that is there this small problem because the mother board is exelente
Stay up to forgive me my bad English I serve myself of a translator.

Quote from: sauria on 14-March-05, 11:32:18
Yeah, just doesn't like the 16M cache drive
I'll receive a maxtor 200gb 16mb sata (6B200S0) by the beginning of the week so I'll probably be working on the problem too

Similar Messages

The variable exit doesn't work

Hi,All
   i have create a exit type variable and assign to a query as filter.
   and in CMOD add code to program: EXIT_SAPLRRS0_001
   But the exit doesn't work , i set break-point but it doesn't stop at all.
CASE I_VNAM.
WHEN 'ZFISYEAREXIT1'.
      READ TABLE I_T_VAR_RANGE INTO L_S_VAR_RANGE WITH KEY VNAM = 'ZFISYEAREXIT1'.
      IF SY-SUBRC = 0.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW = sy-datum(4).            "low value, for example, 2007
        L_S_RANGE-HIGH = sy-datum(4).          "high value = input
        L_S_RANGE-SIGN = 'I'.
        L_S_RANGE-OPT = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
      ENDIF.
ENDCASE.

Terry,
Just make the below change and check. Will check your code clearly again. Again is it a formula variable you are using? Also is that a year infoobject or any other object on which you are restricting?
CASE I_VNAM.
WHEN 'ZFISYEAREXIT1'.
DATA year(4) type c.
READ TABLE I_T_VAR_RANGE INTO L_S_VAR_RANGE WITH KEY VNAM = 'ZFISYEAREXIT1'.
IF SY-SUBRC = 0.
CLEAR L_S_RANGE.
year = sy-datum+0(4).
L_S_RANGE-LOW = year. "low value, for example, 2007
L_S_RANGE-HIGH = year. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
ENDIF.
ENDCASE.

The Scaling tool doesn't work correctly

I want to click an area on screen where I want an object to scale to. Only the left click doesn't work. I have to alt click in order to pick a point, and when I do that a dialogue box appears with % proportions. Not very intuitive.
I have tried resetting the software and no luck.
Any ideas?
Thanks.

Same problem applies to the rotate tool.

When you will release a new java update ? With the last it doesn't work correctly ( java 3d )

I use java 3d, but with the last update it doesn't works with any browser

"When you will release a new java update ?"
"We" don't release anything; we're not Apple, we're just users like you.
Use the feedback form to send queries to Apple.
http://www.apple.com/feedback/macosx.html

300gb doesn't work on K8n neo platinum

Hi guys! This is my first post ever so please bear with me if it confuses the hell out of everybody
Here's my setup:
Antec 480w
3400+ amd64 1mb L2 cache 754 pin
MSI K8N Neo Platinum
1gb Crucial Ballistix pc3200
2 x 36gb WD raptors
1 200gb IDE seagate 7200rpm 8mb buffer
ATI 256mb 9800xt
pioneer dual layer dvd-108
lite-on CDR
Floppy drive
Ok here's the problem. Everything on the top works fine! My computer has been on for 2 months straight without nothing happening. Now when i finally turned it off, I decided to add the new 300gb maxtor SATA 16mb buffer drives. After I did that, and formated it, it worked for a time. Most of the time after i restart or turn off my computer, windows does not post; it locks up to that screen that says "Windows XP" with the bar scrolling on the bottom of it. Some times it just sticks forever at the beginning bios post with the drives being dectected.
My raptors are hooked up on raid 0 on SATA 3 and 4. My optical drives are on IDE-1. My seagate 200gb os on IDE-0. The moment i added the 300gb maxtor SATA to SATA port 1, that is when i started having the problems.
I checked to make sure everything is right:
1. Check boot prioritys.
2. Check jumpers.
3. Updated bios, even the beta-bios.
4. I made sure all the settings are correct. I even cleared CMOS to do it all over again just to make sure.
5. Installed latest drivers and SP 2 (oh i'm running windows XP sp2 by the way)
I was thinking that SATA 1-2 ports are shared with port IDE-0. If that is true, then that's probably why the computer is getting a confused. I don't know, i talked to my friends and they said they had all the SATA ports used up and also the IDE ports. I'm not sure, sometimes i can get windows to post but with a couple of restarts (54 restarts to be exact :P ) Also if it does post, windows freezes sometimes when i try to add new stuff to the 300gb.
I think that's everything. I hope somebody could help me because i'm about to throw this HD out the window, jump on it until i can't breath anymore, then light a cigarette with a happy smile on my face...

Quote from: sauria on 14-March-05, 11:32:18
Yeah, just doesn't like the 16M cache drive
I'll receive a maxtor 200gb 16mb sata (6B200S0) by the beginning of the week so I'll probably be working on the problem too

After installing Mavericks, the optical drive doesn't work for movie DVDs, program install DVDs, or music CDs.

The disc loads but is immediately spit back out. I am fairly sure this is an OS X software issue, since blank CDs don't exhibit this behavior. As far as I know, the drive was working fine before installation of OS X 10.9 (actually the machine is at 10.9.1). The machine is a Mac Mini late 2009 with built-in optical drive. I have seen some other discussion of this or a similar issue in the Support Communities and the only suggested fix I have seen is to reset the SMC. I tried that, with no change in the behavior.
Also, the main OS X support page says that Mavericks includes 30 days of free support after install of the product, but when I try to follow any of the links on this page to find the "free" support, all I get are pages that require entering the serial number of the machine, which then tell me that the support for the machine has expired. Anybody know how to access the "free" support for Mavericks? It has definitely been less than 30 days since we installed it on this machine.

After browsing a lot of the "More Like This" links, it appears that a LOT of people are having this problem. It may be that a simple reset of the SMC fixes the issue on later (e.g., maybe >= 2010) Macs. Anybody been able to resolve this issue on a late 2009 Mac Mini?

Having troubles updating apps (V.32). The ipa file doesn't work correctly.

Need some help.
Thanks

Is the first time i update an app, i already follow the steps in this article (http://www.adobe.com/devnet/digitalpublishingsuite/articles/updating-your-existing-dps-app -to-appstore.html) but is not helping.
The thumbnail appears almost in black, does´t launch, does´t do nothing .
Is a multi-folio app, i already update every folio (v.32), but nothing changes.
Help please

TS3274 This is about screen orientation. The screen switches from vertical to horizontal by itself and no matter how I move the screen it doesn't work correctly. Very frustrating and don't know what to do.

J

Pick it up from the table, or bed, or other horizontal surface, where sensor will not read directions.

I recently downloaded 6.1.2 and am regretting it...for one reason...the search function no longer works correctly. !!

I personally and professionally rely on text messaging extensively. Since upgrade, the search function doesn't work correctly. It only returns partial results. This has never happened with previous upgrades. All the old texts are there but it does not search the entire history. If i compose new text and duplicate the recipients from an old text, it will bring up string...just cant search for it. PLEASE HELP SOMEONE.

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P Mac OS X (10.3.9) System 7 Rocked!

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. 1st gen iPad.

A pop-up message is frozen on my settings page. I was trying to set up an apple id for iTunes when I got a message "required fields have been left blank. The missing information is highlighted in red." the ok button doesn't work. The message is now fixed & I cannot get rid of it. Ironically, when I found this forum I was able to set up an apple Id. Please advise how to get rid of the pop-up box. Thanks!

I'm having this same problem as well and cannot advance--very irritating. All of the information is filled out correctly and I've editted my AppleID information online separately as well to get around this issue, but no luck...

Game Center doesn't work correctly

Game Center on iPod Touch 2nd Gen doesn't work correctly under iOS 4.2.1
It shows wrong language (Englist but not my native language. My region setting is right and the system language right too.)
Besides, the "Games" page only has a button "Find Game Center Games", while it should show my Game Center Games.
The Friends page shows all my friends. But when I press a friend the sub page doesn't show the game my friend and I have in common.
I've restored my device several times, but it didn't help.
How to solve it?

I've had exactly the same problem on my 2nd gen since early May when it just stopped working out of the blue.
There are a few threads here on the subject. I believe that every 2nd gen is affected as I've yet to hear a 2nd gen owner say that theirs works.
Other than waiting for Apple to fix it I don't think there is a solution.

HT4718 optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro

Hi there,
my questions are:
1.optical drive doesn't work, hd is earesed and i need to install os x on my macbook pro.
how to do it on internet?
2.already tried connected via lan cable, but folder with question mark appeared.What could be problem(DHCP was enabled)
3.Is it possible to do it in target disk mode through my even older powerbook G4
4. Is it possible to do it with flash memory , and how to download the stuff on?
thanks in advance
Allterro

If your Macbook Pro (MBP) came preinstalled with OS X Lion (10.7), you can use Internet Recovery to reinstall it.
You will need an Internet connection.
Restart your Mac using Command+Option+R until you see a spinning globe. This will boot into Apple's server and load their Recovery HD.
From the OS X Utilities menu, select Reinstall OS X. You should see a Lion logo to the left of this option.
If your MBP came preinstalled with OS X Snow Leopard you will need the DVD and an external CD/DVD drive to use to install it.
You may also be able to put your MBP into Target Mode with another Mac running a version of OS X that is compatible with your MBP. From that other Mac download OS X from the App Store and point to your MBP (Target Mode) to install to. I've never tried this but it sounds like it might work.

Program doesn't work correctly after a copypaste from a working program

Hi everybody!
i made a really easy program, that doesn't work for some mysterious reasons...
This first one is the prototype of the program: http://pastebin.com/fpFy3uLn
in this version all is working correctly!
So, where is the problem?
The problem is that, once i copy-pasted the functions in the main program, it stopped to work!
I have no compilation error or similar...
This is the final program, the one that doesn't work: http://pastebin.com/7EWn1VSF
thx a lot for your attention

I commented the whole
#Section "InputDevice"
# Identifier "Synaptics Touchpad"
#EndSection
part
and the appropiate line
#InputDevice "Synaptics Touchpad" "SendCoreEvents"
on Sever Layout.
It stopped the EE error, touchpad works here
but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
since I get
drini ~ $ synclient
Couldn't find synaptics properties. No synaptics driver loaded?

AddChild doesn't work correctly in 11.9

comparing the two releases listed below, somehow my Flash program doesn't work correctly on the latest version anymore, nothing was changed in my program but after upgrading to the latest Flash Player, it doesn't work properly anymore, specifically, the items I add through the addChild method doesn't appear properly, was there any changes in between these versions that could have affected the addChild behavior? I'm testing with Windows 7 IE debug version and I see no script errors
Released 10/8/2013) Flash Player 11.9.900.117 (156.2 MB)
(Released 9/24/2013) Flash Player 11.8.800.175 (Win IE only) (50 MB)

Could you please open a new bug report on this over at bugbase.adobe.com? When adding the bug, please include sample code, test url or a test swf so we can quickly test this out internally. If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]).
Once added, please post back with the bug URL and I'll investigate internally.

The optic exit doesn't work correctly K8N Neo Platinium

Similar Messages

Maybe you are looking for