The optical drive red light stays on, no sound in OS X, the car charger not working

The optical drive red light stays on, no sound in OS X, the car charger not working, I think that its all tied to 1 error or 1 issue, maybe something to do with the boot camp file?
Any ideas ?

Hi S,
There is a switch inside the audio jack that may be stuck. Try gently inserting, wiggling, removing the audio plug.

Similar Messages

  • Win 8.1 - solid HDD light on a W530 when the optical drive is closed

    Hello,
    I have a new W530 with Windows 8.1 on and a short time after boot or resume from standby, the HDD light will illuminate solidly (not flickering at all) with no disk activity to speak of showing in task manager.
    I have tried the usual steps of disabling superfetch, search indexing, av, etc. and nothing helps.  The only thing that does influence the light is whether the optical drive is closed or not.  With the drive open, the light behaves normally and reflects the peaks of activity shown in task manager.  The light going solid coincides with Windows turning off the Optical drive after start up when Zero Power ODD is enabled (the light still goes solid after a few seconds with Zero Power ODD disabled so may be related to some energy saving mode?).
    This behaivour is not exhibited in Windows 8, Ubuntu 14.04, FreeDOS or the Bios so does seem to be an oddity of 8.1 on the W530.  There appears to be no impact on performance of the system so it is more of an annoyance.
    I am wondering if anyone else has come across this and/or has any suggestions as I don't fancy siutting with my optical drive open all the time...
    Relevant specs are below:
    Intel i7-3740QM
    8GB RAM
    250GB Samsung 840 EVO mSATA SSD (OS drive & boot drive, hardware/eDrive encrypted with Bitlocker)
    500GB Hitachi Travelstar 7200RPM HDD
    Nvidia Quadro K1000M 2GB (running in Optimus with Intel HD Graphics)
    The laptop is configured with a static 1GB page file on the SSD and a static 36GB page file on the HDD.
    Solved!
    Go to Solution.

    Ok, a bit of progress... For some reason, The SATA controller had been set to Compatability in the Bios rather than AHCI. Doing a fresh build with AHCI enabled did not exhibit the solid light when the Lenovo Settings Dependency Package was installed
    Restoring my system image and then going through the process of enabling AHCI after a windows 8.1 install has solved the issue.
    So, lesson learned - AHCI is needed in this config unless a solid HDD light is wanted. Obviously this is a bug, what is the best way to report it to Lenovo officially?

  • On my Macbook pro 15 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive.  Is that true?

    That is correct. The tech specs indicate:
    Hard Drive Interface
    6.0 Gbps Serial ATA (SATA)
    Optical Drive Interface
    3.0 or 6.0 Gbps Serial ATA (SATA)

  • Is this normal for the Optical Drive?

    I don't know if this has already been asked but....
    I am kinda worried about the optical drive on my mini.
    Has anyone else noticed that the optical drive on the minis is kinda loud, especially right after you have put in a disk? All disks that i put in the drive make a sound like they are hitting against something, but stop after a couple of seconds.
    Also, is it normal for a kind of "fluttering" sound to come from the drive when you are playing a DVD (it happens about every 5-10 seconds but doesn't effect the playing at all)?
    And finally, are all minis designed so you have to push a disk at least 5/6 of the way before the drive ***** it in?

    Yes to all questions.
    Optical drives these days make a lot of noise. You don't hear it in something as large as a tower computer because the computer has its entire case to pick up the vibrations. With the drive just under the case cover and nothing to make distribute very far, it will make more noise on a notebook or Mac Mini just because of the constrained space.
    That said, if put sticky labels on disks, or get extra thick disks that is not very good for slot loading drives. See this article on nonstandard media:
    http://docs.info.apple.com/article.html?artnum=58641
    If you want more flexibility with media, external Firewire and USB optical drives exist. http://www.macsales.com/ has a nice selection that offer full compatibility.

  • Retrieve data from a Hard Disk That was connected to the optical Drive of Mac Book pro

    Hi Experts
    I have been using a Mac Book pro from 2011 (Early 2011 Model), In the mid of 2012 I have planned to upgrade, and bought a 240 GB SSD and 16 GB ram from OWC, Installed successfully and bought another 750 GB WD Sata Disk and connected it to the Optical Drive Bay of the Laptop, using the optical drive as an external device now
    I was using the SSD as the main disk for all the applications and OS itself, and tranferred all the user library (iTunes Library, iPhoto Library, Documents etc..) to the additinal 750 SATA Disk,
    Last week the Mag Safe cable has been worn out and seperated completely from the adapter, I tried soldering the cable again and it was working for two days, third day The machine stopped charging and it was working until the battery run out of charge,
    Now I have bought a new Mag Safe Charger for 108 Singapore Dollars and it wont charge, read in iFixit Forums to change the Mag Safe DC in Board, so found a new part in singapore and replaced DC in Board myself, after doing this when I connected the new mag safe adapter, it fired the cpu fan for two second, I was able to see the green light the adapter and it stopped again and the green light wont lit up now
    Removed the logic board from Laptop completely and tried connecting the Mag Safe Adapter I can see the green light,
    So with all the above details, Iam confused whether its the Logic Board or the Battery that is giving me issue, I can find out the problem by contacting a Authorised service centre, but Iam thinking whether its is worth to repair it or buy a New Mac Book Pro ?, Because if I need to change the logic Board need to spend 900 Dollars + 100 dollar service charge
    So I was trying to remove the 750 GB WD Sata Disk to see if I can get the data back so I can buy a new Laptop without worrying,
    The real issue now is when I connect the 750 WD Disk using a sata to usb converter cable to my official macbook, it says the connected USB device is drawing more power than expected and it wont even detect the hard disk, Iam wondering why it cannot detect the hard disk even in the disk utility, is there any way to get the data back from the 750 GB WD Sata disk (which was connected to the Optical Drive Bay)
    Your expert advice is much appreciated
    Regards
    Vinodh

    Welcome to the discussions!
    It sounds as if your disk was not correctly formatted to work with the Mac operating system. I suspect it was formatted in FAT32, which is primarily a Windows format. This type of format will not allow the disk to accept any files larger than 4GB. That's probably why you are seeing the crashes.
    Connect the drive to your Mac and open Applications > Utilities > Airport Utility.
    Click your disk on the left and click the erase tab on the right. You need to format the drive in +Mac OS Extended (Journaled)+. Formatting will erase everything on the disk.
    Then you could try the drive again attached to your AirPort Extreme to see if that will do what you want.

  • Red light stays on..then battery with lightning bolt show

    I have the 8330 curve and as i was getting out of my car tonight and my phone dropped. It shut off and hasnt turned on since...i plugged it into my charger and the red led light stays on and then goes off and a battery with a lightning bolt shows on the screne. Is there any thing to do to fix this?

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Please note that "known good" and "new" are not necessarily the same thing...while rare, a new battery can be defective.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Is it possible to leave the optical drive tray open?

    Hello -
    I'd like to know if there's any way to have the optical drive tray stay open when shutting down a Mac Pro (PowerPC version, running Leopard)? It's for security reasons in my office to make sure no media is left in after the computer has been shut down.
    Thank you.

    AppleTV2 has no 'volume control' over optical - it either sends a Dolby Digital 5.1 stream for movies encoded with this or a stereo linear PCM signal.  AppleTV1 used to send stereo audio as 44.1 kHz 16 bit (CD quality) whatever it was originally  (MP3/AAC/AIFF/WAV), AppleTV2 mucks around and sends a DAT quality signal of 48 kHz 16 bit over optical which yoru Tv may not be able to decode.
    Like Rudegar I'd consider the HD4200m as perhaps the model number - some older TVs had the same connections on teh back for a given range, just on lower specced models the connections were not actually connected/enabled.
    Another consideration would be whether or not the optical port on the TV is optical out (would not work) rather than  optical in.
    The lack of analogue connections on AppleTV2 is a nuisance.  Send some feedback:
    http://www.apple.com/feedback/appletv.html
    Won't help current hardware and doubtful any new design but you never know.
    AC

  • The optical drive on my laptop will not go back in.

    I accidentally pulled my optical drive out too far and now it will not go back in all of the way.
    I think one of the silver runners is broken, because one slides all the way but the other doesn't.
    I think the connection may be lost as the light on the drive no longer lights up.
    Any advice? Is it easy to take the back of the laptop off and see if the connection is loose? 
    Thank you. 

    @Shepps93 ,
    Hello and welcome to the HP support forums.  Don't feel bad I have done this in the past myself.
    Here is a link you the maintenance guide for your notebook.
    Maintenance and Service Guide
    Use this guide to find out how to remove the optical drive.  You may have to replace the drive if the guides have been damaged or bent.
    Please let me know if this helps.
    Thank you for posting and have a great day.
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    D5GR
    I work on behalf of HP

  • Why is apple moving away from the optical drive with the new Macbook Pro?

    Now I know that they are still selling the Macbook Pro's with the optical drive, but why abandond the drive in the newest model? CD's, DVD's, and Blue-ray's are still big parts of our lives, why push people to swithch over to digital? I do not want to go out of my way to buy digital copies of my favorite movies, softwares, and games when apple stops selling the incase optical drive, nor do think it's practical to carry around an external drive?
    Now I know this is a harder question to answer, but why does it make the product better? Does this make the product more efficient? Is it more eco friendly? And please, be specific. Thanks.    
              - Pappyprops
         P.S. I am not looking for a new computer, I have a 2011 Macbook Pro and love it!

    Let me take your specific questions in order:
    Why abandond the drive in the newest model?
         There are a couple of reasons - I should note that I do not agree with them, just stating them. They want to pull more WinDoze 'ultrabook' shoppers over to the Mac line. That's a good thing. The impression is that lighter is better for that market so, they had to lose some weight. Also, Apple obviously believes that 'culturally', we will at some point fail to utilize physical mediums. I can tell you that is never going to happen. Not this year, not in ten years, not in 100 years. Now, before some smartass calls me on my inability to time travel, thus, my answer must be wrong, let me point out the obvious, which is that everything physical has a limit. DVDs do not last forever, but once encoded, they are a solid medium and billions exist. Thumb drives sound great in theory but in practice, despite being able to hold more data, they are no more solid than DVDs and it will be a long, long time before DVDs go away in the marketplace. People want to have physical mediums. Look at the iPad - great for reading books, but every survey shows people prefer actual books. Personally, I do not want to have to have 500 TB of space for all my media, nor do I want a company to have the ability to 'pull the plug' on my media - if it's not physically in my hands, they can do that. Same kind of reason there is opposition to the US healthcare bill; do you feel safer with your information in a folder in an office where the only real fear is fire or safer with your sensitve healthcare information on a drive somewhere where a hacker can wreak havoc? We are simply more comfortable with touch-and-feel.
    Why does it make the product better?
        It doesn't. IMHO. Now, the Retina screen is something better (I questioned this when I compared it to the anti-glare version of the prior incarnation, see prior post) but the SSD, while tiny, is technically safer and more solid for data (no moving parts, etc). But the lack of a DVD drive (I felt they should have gone the other way and provided at least an option for an internal BluRay Superdrive) does not, by itself, make it better. It makes it lighter, not better. For people who have one computer in their home for business and home use, an external drive will now be a must; the kids will want to watch their movies on roadtrips, etc. In my case, clients want DVDs, so an external is now a must for me, unfortunately.
    Does this make the product more efficient?
         I can't imagine it does in any way, but I'm not an engineer and, more importantly, I do not have one (yet). However, barring OS issues, loading a DVD vs. loading a movie in iTunes - loading the iTunes movie is faster, but it's obviously not better, since BluRay is much better image quality. Does the speed of the load make it more 'efficient'? That will be argued. I would say it is negligible. It may help airflow not having it in there, it obviously makes it lighter. But that does not automatically equate into more 'efficient'.
    You also asked about eco-friendly and frankly, I think these machines are as eco as you can get and can't really be moreseo. MHO. I cannot imagine not having an optical drive makes it (net) any more eco friendly.

  • My MacBook Air does not have an optical drive.  I have a program (Megastar V) which is installed using a CD.  Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

    MacBook Air does not have an optical drive.  There is a program I wish to install on my Air which is an astronomy application called Megastar V.  Installation requires the use of a CD.  Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
    With gratitude,
    Otto

    Thank you for explaining to me how to do this.  I will try it tomorrow and let all of you know how it goes.
    Otto

  • The optical drive on my Macbook white keeps ejecting DVD's?

    So am trying to upgrade to snow leopard on my older intel based macbook white, but the disc just ejects, first I thought it was a problem with the disc, but I tried with another DVD and did the same thing. CD's seem to work fine.
    Tried the disc utility repair and safe mode and all that but no joy. So I also have a newer aluminium macbook which works great, so I was wondering if it was at all possible to use the optical drive on my newer macbook to install the disc on my older macbook using the remote disc facility? I know its for the Air but is there a way to make it work for my non air macbook. I wanna see if this is possible before I go to the expense of getting an external DVD drive or even getting it fixed by apple which im sure is gunna costa an arm and a leg!
    Or is there something else I can try to get my dvd section of the optical drive working again?
    Many thanks
    Hannah

    If I were you, I'd uninstall Power Manager entirely. I don't particularly like any of Lenovo's software. Each and every one has caused me problems so I've gotten rid of them all.

  • HT1305 how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    how can i turn down the fan rpm that's between the optical drive and hdd in my power mac g5 dual 2.3?

    Ok, I saw that error in your logic. A Dual G5 2.3 or even a Dual Core 2.3 does NOT use LCS at all. Its air cooled and if anything if the OP is experiencing this problems could be due to possible heatsink paste drying up. He might have to re-apply MX 7 or Arctic Silver.
    The only G5's that use LCS are: G5 dual 2.5 from Late 2004, the G5 Dual 2.7 from Early 2005, and lastly the G5 Quad-Core from Late 2005-end of September 2006.
    Hope this helps.

  • IMac internal optical drive reads and plays cd's but DVD's spin for a few moments then eject. Then any drive utility access results in the spinning wheel of doom. Then the optical drive doesn't show up anywhere until a restart. OSX 10.6.8 - Intel Core 2

    iMac internal drive locks up after trying to play a DVD. CD's work properly. All preference settings are correct. I have tried several different DVD's that work in other drives. Drive is : HL-DT-ST DVDRW GA11N. After spinning wheel of doom goes away, so does the optical drive in Disk Utility and System Profiler and no disks work because the drive isn't there until a restsrt. Any ideas? Thanks.

    The battery alone is a $5 to $15 part.  Hard drives vary in cost, and depending on the iMac, they may or may not be able to install a third party hard drive, or one resold through Apple.    The resold through Apple drives tend to cost more.  This article discusses the varying successes of third party drives on iMacs:
    http://blog.macsales.com/10146-apple-further-restricts-upgrade-options-on-new-im acs 
    The labor costs depend on the store as well as the time to get the parts in stock.    Call around.

  • (2011 13" Macbook Pro Model 8,1) I want to replace my 320GB HDD and replace it with a 6gb/s 120GB SSD. I also want to replace the optical drive with a 7200RPM HDD 750GB.

    I want to use:
    The SSD and enclosure to replace the optical drive with the new HDD
    So basically, I want to use the SSD in the link above. I want to set this up as either preferrably a fusion drive. If not the smoothest most stable configuration. I have a Macbook Pro Early 2011 13" with 8 GB of ram, 2.3 GHz Intel Core i5, 320GB HDD.
    I want to install the SSD directly to the SATA port where the 320 GB HDD is currently. I then want to install the new HDD, preferrably a name brand 750 GB 7200RPM hard drive where the optical drive is now. I want the storage to work in a way in which the OS, and my most used programs and files get stored on the SSD, and everything else gets stored on the larger hard drive. My most preferred method would be Fusion drive, or a SPAN drive.
    I would like to use a Seagate Momentus XT, but I learned that there might be issues with compatability with this. I dont mind using the 3 gb/s 500GB option, but would like to know if it would even be smart to do it. I also have no problem settling for a regular 7200 RPM hard drive.
    I have read a bunch of stuff online but I still am not sure if this is even possible. I want my machine to run as fluid as possible so any info would be appreciated.

    bump

  • Long boot time when there's a disc in the optical drive

    Windows 7 waits for the DVD-ROM drive to spin the disc when I have a CD in the Optical Drive.
    This causes Windows 7 to take much longer to boot when I have a CD in the drive, because it takes about 10 seconds until the DVD drive starts to spin the CD.
    Is there a way to make Windows 7 not spin up the dvdrom drive on boot?
    Thanks
    http://peteroy.blogspot.com/

    Hi,
    Try to reset the BIOS to default settings, then check how it works.
    Alex Zhao
    TechNet Community Support

Maybe you are looking for

  • HT3702 how do i remove my credit card from my account.  I just want to use itune cards

    How do I remove my credit card information from my itunes account?   I would like to just use itune cards

  • Run-time error while executing alv grid report

    Hi everyone I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE. Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.

  • ITunes can't locate music files

    Any music that was copied into my iTunes music folder cannot be located. Anytime that I try to play the file from iTunes, it shows an error message, requests that I locate the file, and then proceeds to tell me that I need to format my hard drive. Wh

  • JComboBox with Generics

    Hi, I have a class with two fields/propertys. Like this: public class TestClass {      private string myCode = "";      private string myDescription = "";      public TestClass (String Code, String Description) {           this.myCode = Code;        

  • Does UCM 11g provide any default skinning options?

    I have 2 questions basically: 1 )In UCM 10g there is an option to select skins IN My Profiles menu which provides 2 skin options, Oracle and Oracle2.. Is it possible in 10 G to create a website and use these two skins in your website to change menu,