The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

The original 5 meters distance router in WiFi signal is full, but the beginning of the past few days more than 3 meters on the search to the WiFi signal, my own iPhone 5, iPhone 4S received signal is full, only iPad2 searching for less than the signal.

Similar Messages

  • Gzzz. if i would have know this jetpack uses so much data,, even if i am not on anything and shut it off when i don't use it, i wouldn't have bought this,, already used 1.5gb of data and only on twice for less than 2 hours this month,, whats up with that,

    jet pack sucks.... used already 1.5 gb data and only used less than 2 hrs time,, and don't download anything.  even buying tn gb, sounds like thats a rip off, i been with verizon many years and wish i would have checked this before i purchased this jetpack.  sounds suspicious to me, guess verizon wnats to loose all its  jet pack users,, no help, no stopping the usge, may be worth paying to stop the contract at this point, this is rediculous..  anybody gotten any help withis resolving this issue,,

    I Am still baffled why anyone would think 15 GBS a month is enough to run a computer.
    it will certainly not run multiple devices.  Watching one hour of video will add up to 1-3 GBS of data alone.
    try a data meter.  Keep Tabs On How Much Data Your PC Downloads and Uploads
    How much data do you use on your computer a month?
    Our 3 person household with Cable internet guzzles close to 300 GBS a month at home and have a 30 GB cellular data pool. (Which we don't make much of a dent in)

  • Slow broadband over the past few days.

    My broadband speed has gone slow pver the past few days, from a guaranteed 2mbps to 0.92kbps
    http://www.speedtest.net/my-result/3615801582
    I'm a BT Vision customer, so if I don't have the 2mbps guaranteed, my Bt Vision is pointless. 
    Any help would be greatly appreciated. 

    in order for the forum members to help please can you post the adsl stats from your router you may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or if HH4/5 then go to troubleshooting then logs and you are looking for 2 line together when hub last connected to internet and they will show your connection speed and noise margin or if netgear enter 192.168.0.1). Then run  btspeedtester  (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
    are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    there is no speed guaranteed - all packages are sold as up to speeds.  no ISP guarantees any speed
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • I received a notification on my iphone recently that "Leroys Ipad" is now using my phone number for Imessage. The problem is the Ipad is in possession of my ex girlfriend and we no longer communicate. How do i receive Imessage on my Iphone only?

    I received a notification on my Iphone recently that "Leroys Ipad" is now using my phone number for Imessage. The problem is that i no longer have that Ipad but my ex girlfriend does and we no longer communicate. How do i receive Imessage on MY PHONE ONLY or delete other devices not in my possession from my messages?

    You need to change your Apple ID password.  You could login to Find My iPhone and wipe that iPad if you felt the need to do so.

  • A 6 and a 6 Plus with seperate phone numbers are receiving txts sent to only one number. They share the same iTunes acct. Is this the problem?

    A 6 and a 6 Plus with seperate phone numbers are receiving txts sent to only one number. They share the same iTunes acct. Is this the problem?

    Hmm... Just found out the 6 and 6 Plus were updated to 8.1.1 today. Coincidently, that's when this started.
    Another thing is both phones ring and you can answer either one, or both. fwding is not selected.
    Thanks Kilted Tim.

  • The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted problem continues

    opps.  Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers.  This is only happening on my Macbook not other macs.  Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those.  Checked for software update and installed suggested downloads.  Problem still contintues.  Any suggestions?

    Folks,
    even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
    In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
    When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
    What else can be done to correct this problem?
    Thanks and best regards.
    Fred Kunz-Shirzad
    Chemin Ronzeures 6A
    1297 Founex VD
    Switzerland
    [email protected]

  • I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?

    I have upgraded to OS X mavericks and there is now a problem with my email. I have discovered several emails no longer contain the original message instead another completely different message is appearing but under the name of original sender. Any ideas?

    With the account mailbox selected, Mailbox menu, Rebuild.

  • When I go to Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

    After the OS X Yosemite 10.10.3 update When I go to use Preview to view a photo it shows up for less than a second then disappears and just leaves a gray box where the photo should be. iMac (Retina 5K, 27-inch, Late 2014). I need Preview for work.

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a general summary of what you need to do, if you choose to proceed:
    ☞ Copy a particular line of text to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
    5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
    You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.
    If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
    [Process started]
            Part 1 of 8 done at … sec
            Part 8 of 8 done at … sec
            The test results are on the Clipboard.
            Please close this window.
    [Process completed]
    The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
    Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
    12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
    Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoyi

    Downloading images used to go automatically to the last folder used to save images, even when reopening Firefox. In just the past few days, possibly coinciding wih the most recent updates, the folder defaults to the 'Downloads' folder. This is most annoying. What happened? Internet Explorer 8.0 did the same thing. This was one of the reasons why I started using Firefox to download all images. I went into Tools>Options and it only lets me set another folder. I dont want to set a specific folder I want it to always go to the last folder used. So what gives?
    == This happened ==
    Every time Firefox opened
    == possibly when the most recent updates were installed, a few days ago

    Thanks jscher 2000. I guess I didn't make it clear. "It restarts with all the addons activated, and resumes with the tabs that were open before closing it." IE, it's running fine now with all the extensions activated. Everything is OK now.
    So something in the Firefox code was causing the bad behavior. It's not essential that I find out what the problem was - I'm just curious. And if anybody else has this same problem, it might be nice to have it corrected at the source.

  • TS2972 I cannot seem to get all of my music shared across the network from my MacBook Pro to my iPad. This was not an issue a few days ago. Can anyone help?

    I cannot seem to get all of my music shared across the network from my MacBook Pro to my iPad. This was not an issue a few days ago. I can see all my songs if sorted that way, but if i sort by artist, only a few of them are present. Can anyone help or have any insight?

    Well I didn't think of it before, but I logged out of my apple ID othe iPad's home sharing. The I logged back in and it worked. It's a little weird, but I will take it. Thanks!

  • Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

    Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

    First, make sure you're logged into the iTunes Store using the account ID and password you set up, or used, when you redeemed your card/gift.  If you are, try signing out of the account and back in.
    If you're sure you are using the correct account and that you're signing in to the iTunes Store, and signing out and back in doesn't help, go to the Purchase History and review your purchases to make sure that you should indeed have a balance left. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display. This display error can usually be corrected by logging out of the iTunes Store and then back in.
    If you confirm that you should have balance left but the iTunes Store isn't showing it correctly, send a message to the iTunes Store customer service department through the contact form you'll find by selecting the most applicable section of their Support page (select the Contact Support link and follow the instructions) and explain the problem to them.
    Good luck.

  • Since updating to iso7 my battery is needing to be charged at least twice a day.ive always looked after my battery and only ever charge when less than 20% so why is this happening? Thankyou

    Since updating to iso7 my battery is needing to be charged at least twice a day.ive always looked after my battery and only ever charge when less than 20% so why is this happening? Thankyou

    It will take longer to charge the 5G's battery than either the 3G or 4G's battery.
    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source like a computer's USB port
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • FCP X is loading and loading with the colour wheel revolving for ever for the past few days.

    FCP X is loading and loading with the colour wheel revolving for ever, for the past few days.
    FCP X was working fine in my new 15" Mac book pro (Retina display with Mountain Lion 10.8.2) for the past one month. Now a days, each time I try to open the FCP X, the same non-stop colour wheel is rotating, trying to restore one of my project. It continues even for hours together.  Finally I am force quiting the application.
    How do I come out of it ? Will I be able to recover my project.  I didn't do any backup in particular.
    Is backing up on the regular basis is required?
    I tried the following guidance by Apple, 
    In the Finder, hold down the Option key and choose Library from the Go menu.
    In the Library folder that opens, go to Application Support/Final Cut Pro.
    Drag the Layouts folder from the Final Cut Pro folder to the Trash.
    Still my problem is continued
    Help me

    This is my pet checklist for questions regarding FCP X performance - you may have already addressed some of the items but it's worth checking.
    Make sure you're using the latest version of the application - FCP X 10.0.5 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB. I run it with Lion 10.7.5.
    First, check that you have at least 20% free space on your system drive.
    For smooth playback without dropping frames, make sure 'Better Performance' is selected in the FCP X Preferences - Playback Tab.
    If you have not already done so, move your Projects and Events to a fast (Firewire 800 or faster) external HD. Make sure the drive's formatted OS Extended (journalling's not required for video). You should always keep at least 20% free space on the Hard Drives that your Media, Projects and Events are on.
    Check the spec of your Mac against the system requirements:
    http://www.apple.com/finalcutpro/specs/
    Check the spec of your graphics card. If it's listed here, it's not suitable:
    http://support.apple.com/kb/HT4664
    If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install of the OS would be recommended.
    Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
    If your playback in FCP X is not good, I strongly recommend you use ProRes 422 Proxy - it edits and plays back like silk because the files are small but lightly compressed (not much packing and unpacking to do) - but remember to select 'Original or Optimised Media' (FCP X Preferences > Playback) just before you export your movie, otherwise it will be exported at low resolution.
    The downside of 'Proxy' is that it looks awful. DON'T use Proxy when you're assessing things like video quality - especially focus.
    If you have plenty of processor power, for the ultimate editing experience, create Optimised Media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
    Personally, I work with XDCAM EX and h.264 from a Canon DSLR. Both of these run fine with my system, but I do transcode multicam clips.
    Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
    Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot. There's a great application for this, called Event Manager X - for the tiny cost it's an invaluable application.
    http://assistedediting.intelligentassistance.com/EventManagerX/
    Unless you cannot edit and playback without it, turn off Background Rendering in Preferences (under Playback) - this will help general performance and you can always render when you need to by selecting the clip (or clips) and pressing Ctrl+R.
    The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
    If none of this helps, you might have incompatible or corrupt media or project files. Move ALL your Events and Projects to temporary folders so that FCP X doesn't find them on launch. If it launches OK, re-introduce the Events and Projects one at a time, re-launching each time, so that you can track down the corrupt or incompatible files.
    Andy

  • SetString can only process strings of less than 32766 chararacters

    Hi,
    My code is java is described Below. When i'm trying to insert the data in NCLOB fields. size of data is 53935 Characters. It's giving me " setString can only process strings of less than 32766 chararacters" error. Even i'm try it with 10G JBDC driver.
    Please suggest me any solutions.
    StringReader textStream = new StringReader(value);
         CallableStatement cs;
                   try {
                        cs = connection.prepareCall("begin SP_UPDATESIMPLETEXTCONTENT(?,?,?,?); end;");
                        cs.setInt(1,0);
                        cs.setString(2,pageId);
                        cs.setCharacterStream(3, textStream, value.length());
    //                    cs.setClob(3,clobData);
                        cs.setString(4,toDeleted);
                        int i=cs.executeUpdate();
    mail me at ajay.saharan @gmail.com
    Thanks in advanced
    Ajay

    I'am facing the same problem, after doin' some research I found this:
    OC4J 10.1.3.x no longer uses the <data-source> element, and we are not aware of another way of passing through the setBigStringTryClob property. See JRA-12564 for details.
    This means that you cannot store text strings longer than 32K in Oracle for OC4J 10.1.3.x.
    Has anyone has any luck solving this problem?

  • I have had an apple iPad 2 for less than a year and I have less than 2 pages of apps but when I look at the space meter the "other" section is taking up 6.7 Gb out of 16 Gb on it. I have researched this on the Internet and no one seems to know what it is.

    I have had an apple iPad 2 (16 Gb) for less than a year with less than two pages of apps, but when I look at the bar which tells you how much space you have used, it says I have 6.7 Gb worth of "other" space used. I am unable to download any apps on account of all the space used. I have researched this problem and I can't seem to find an explanation. If anyone knows the solution or has spoken to apple about this please help if you can. Thank you!

    The long and short of it is that you will probably have to restore your iPad. That giant "other" space is a sign of a corrupt file from a sync, I am pretty sure, but I am quite sure that the way to resolve it is to restore the iPad.
    You can search the discussion site for similar threads but I think you will find that a restore is the way to correct it. Read this one.
    https://discussions.apple.com/message/12531408#12531408

Maybe you are looking for