The output values are showing different

Hi,
the infobject of 0FISCPER listcube output and the same infoobject is showing different values in query output . Some thing is problem in this infoobject . Can any one please give the solution i will award the points.
Regards
RK

Hi Rama krishnan,
Check the infocube contents for this field and Compare with the query result. if they are not matching then.
Use RSRT tcode to debug the Query and trace the value of 0FISCPER.
Note: Check the transformation (update rule) for 0FISCPER. see whether the automatic TIME-CONVERSION is used. it it is used then the system will convert the value.
this might help u.

Similar Messages

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard, and now the two monitors are showing the same thing. How do I undo what the cat did?

I have a macbookpro with a second monitor connected using an Apple connector. The two screens show different parts of the desktop. My cat walked across the keyboard touching various keys, and now the two monitors are showing the same thing. How do I undo what the cat did?

Have you tried HELP in FINDER? If you open HELP and enter 'displays' in the field in the upper right hand corner you will get a list of topics on setting up monitors. Specifically read 'Setting up multiple displays to show the same image' and 'Setting up multiple displays as an extended desktop'.
Ciao.

Reading the output values after each step executes in LabVIEW User Interface

Hello all,
Development environment: TestStand 2010 SP1 and LabVIEW 2010 SP1
Problem: is there a way to execute the subsequent steps programatically and get the output values from each of them?
I have already extended a little bit a Full OI interface for TestStand to load up any sequence, choose some of the steps and run them step by step (something like option to Run Selected steps). What I am trying to do is to add some actions between each step and do that in User Interface (I can't modify the sequence!), so I am starting the NewExecution with some previously configured InteractiveArgsParam and set an option breakAtFirstStep to True. Afterwards I am just doing something like Step Over when debugging the sequence and this works good, but I didn't fine a way yet to read the output values from the steps...
Then, if I wait until the execution finishes I can read my Results by processing the ResultObject, but this works only after finalizing of the test sequence. Since I wanted to stop after each step, read the values, do some actions and continue to the next step I tried to register an event callback for Trace of Execution View Manager. I can see that after each executed step this event is triggered, but when I try to read a ResultObject returned in Event Data it is not filled with values (ResultList seems to be empty?). Is it a proper behaviour or maybe I am doing the readout in wrong way? (It is the same VI as for reading ResultObjects after sequence finishes and there it works fine for arrays, containers and other data types).
Like I mentioned I can't modify the Test sequences, I can't add a UImessages.
What are my options? Should the trace event returns all output values from each steps or is it just used for status checking? Or maybe there is completely different approach to that matter?
Thanks in advance for any suggestions,
Best Regards.
CLA, CTD, CLED @ Test & Measurements Solutions Poland
Solved!
Go to Solution.

Thanks for your replay, I have tried to build it in my LabView Block Diagramm, es seems like this image.
But the variable GetNumSubProperties ist always 0. Why?
PS: I need only the variable "Step.Result.PassFail" from the last step, do you know, how can I get it? I think, it is maybe easier than read all the "Result".
Attachments:
ReadStepResultInLabview.JPG ‏39 KB

Inventory cube - non cumulativekey fig values are showing -ve values

Hi Guru's,
For Improving the performance of inventory cube *0IC_C03
The following steps i did:
1) Created History cube by taking a copy of actual cube (0IC_C03).
2) Transferred all the four years of data (2007, 2008, 2009, 2010) to history cube(4 yr data) as a back up to do clustering and for cube remodelling.
3) After doing all these, loaded the current 3 years (2008, 2009, 2010)data back to the actual cube and kept one year data in the history cube (2007) (i.e maintained only recent 3yrs data in actual cube).
5) Created a multiprovider includes actual and history cubes and populated the existing report on top of the multiprovider.
6) After purging one year data from the actual cube, stock values in the reports are showing negative values
7) To clear that issue i loaded the 2007 year data back to the actual cube (now the cube has all years data as it was before) to avoid the negative stock value, but again stock values are showing negative values.
How to solve this issues in inventory cube..
how too eliminate the negative value in reports which was working prperly before data purging( removing the first year data from the actual cube)

Hi prayog.. 10q for answering... Yeah i went 2 the data targets. And the forumlae is already wrriten like this IF( Debit/Credit = 'H', Qty in OUn, ( 1- * Qty in OUn ) ) for Actual Consum. K.F and IF( Debit/Credit = 'H', Amt. in local curr., ( 1- * Amt. in local curr. ) ) for Amount.....
So i already said that from one of the infosource the data is flowing through ODS and then 2 CUBE. So i checked out the data in ODS with the movement type and posting date as per in the Report.. I selected the 'Debit/Credit' = H and Movement type and Posting date... But in ODS o/p the keyfig's are not displayed..... This is the problem...
Cheers,
Hemanth Aluri...

Why two FLOAT values are stored differently?

Curious as to why two FLOAT values are stored differently. Inserting
two FLOAT values one with value of 99E9 and the other with 12E-9.
Value for 99E9 was stored in the database as 99000000000 and 12E-9
was stored in the database as 1.2E-8. Why were they stored in
different formats? I am using Oracle9i

Please don't cross post between the Database - General and PL/SQL forums.
Please check the other thread at Re: FLOAT Value Doubt
Cheers,
Colin

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

In Develop mode not all of the adjustment panels are showing. The basic panel is not evident.

Right click near to one of the other options e.g tone curve and a popup list will provid you with the option to display or hide the options. see image capture.

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open

How do I open CS4 files after Upgrading to Cloud? The older files are showing up gray and won't open.

InDesign files are compatible wih all the newer versions. A cs4 file sh
Could you answer a few questions to help us better understand the issue:
If you are trying to open the files by double clicking them, do they give any error??
Have you tried to drag a file into indeisgn, if yes what happends when you do that??
Is there any error message that you get??
Also if you create a new files in InDesign CC does it show up as grey like the cs4 files or do they open fine??

Delete the records which have the Data values are NULL before load data to BPC model

Hi Everyone,
I am loading the data from flat file to BPC Model (10.0 Version).
Source data (Flat file) looks like below:
RP_Employee RPT_Currency Data
Test                USD                   8
Test1              USD
Test2              USD                    6
My user requirement is that to delete the records which have the Data values are NULL before load data to BPC model.
So,Please let me know how can i meet to this requirement.
I am thinking that,it is possible by using start routine BADi. If i am correct please let me know process like creation of class and BADi implementation.
Thanks in advance!!

Hi Nilanjan,
Please see my source data below:
Account      Client       Employee     Time                Data
123              XYZ            Vishu            2014.01               300
456                                                       2014.01
789              ABC         Alexander      2014.02               200
If you see the second record,
If data value is ZULL, then the Employee or another dimension is also NULL.
So I want to delete second records.
If it is Start routine please share the code and steps to do.
Thanks in advance!!
Regards,
Viswanath

I am using dreamweaver cs6 and none of the menu's are showing up like the common, form, layout, spry etc...not sure why?

i am using dreamweaver cs6 and none of the menu's are showing up like the common, form, layout, spry etc...not sure why?

Which version of CC -- 13, 2014, or 2014.1? You'll find it under the Help menu > About DW.
Spry Menus are gone.
Color is something you add with CSS.
Nancy O.

Just downloaded Illustrator CC 2014 and none of the new features are showing up. Can anyone help? Thanks!

Just downloaded Illustrator CC 2014 and none of the new features are showing up. Can anyone help? Thanks! I really need to figure it out so I can start using the awesome new features for Illustrator.

in creative cloud does it show as up to date? if not "Update illustrator"
if it does I would think about uninstalling illustrator and re-installing.
option for that is to the left of the up to date green tick.

The dependent requests are in different transport orders

Hi,
When i save a particular query, and then try to reopen it, i get an error saying "The dependent requests are in different transport orders".
Because of this error, my query becomes uneditable.
Could anyone help me out with this??
Thanks.

The best way to transport the query is to go to RSA1->Transport connection and collect all dependent objects like formula variables..calculated key figures..etc in the same transport.

BO XI Desk-I graph The negative values are rising form the lowest value up

The negative values are rising form the lowest value up. Instead of dropping from the Zero-line. Where is the problem originating? BO FP2.3.
The positives values are also rising from the lowest value up.
The problem only occurs withing Desk-I. Within Web-I this problem does not occur.
Edited by: A. SMULDERS on Sep 7, 2010 10:35 AM

Hi
Try with the following symbol in the field
&ITAB-NETWR(>)& - will write the sign as (100.00-)
&ITAB-NETWR(<)& - will write the sign as (-100.00)
and based on some field in the program write like
If itab-shkzg = 'H'.
itab-netwr = itab-netwe * -1.
endif.
and try to print this field in the form.
<b>Reward points for useful Answers</b>
Regards
Anji

Some albums are showing different covers since updating to version 7.0.3

I just recently downloaded the new version and since then several albums are showing a different album cover. How can I get this to be correct again.

Yes. I seem to have fixed it, but not really. I erased all music from phone, and then manually managed a resynced eveything I wanted back on there. Interstingly, it didn't work the first two time and said (waiting to make changes) so I was freaking out. But the third time was the ticket and now we are good. Unfortunately, there is a bug, and until there is a real fix, my music that I have in itunes on my computer is not easy to get to the phone. It seems that many people have had the exact same issue since the updates. Hopefully it will fix itself in the next update. Thanks for help though.

EHP6 to EHP7 Upgrade Issue: Junk Values are showing for BW data source

Hi,
We are upgrading ECC from EHP6 to EHP7. We have custom data source which is build on custom Info set and Info set is built on Pooled table ZXXX. Datasource is showing the junk values in RSA3 after upgrade. I have re-generated the Info set and tested but no use. Below is the RSA3 data screen shot. Can anyone suggest me to oversome this?
Thanks,
Prasad

Hi Prasad,
Few things to check:
1. Pooled table data for which the datasource is created.
2. Reactivate the extract structure - check the dataelement also for date.
3. Is there any custom code present in Infoset? - if yes then it may be possible that dates are being calculated in that custom code and wrong format is being used there.
Thanks
Amit

The output values are showing different

Similar Messages

Maybe you are looking for