The packet data and wlan connection runs automatia...

guys guys guys i'm having a wiered problem with this rubish E72
well every time i check my log i find that my phone has used packet data connections and wlan connections for small time intervals and small periods while i haven't used the internet for a long time btw i always make sure to exit all app and also make sure to disconnect my email before exiting so packet data signals and wlan signal are not (on)
so that means that the phone just uses internet by it's own self also notice that the time that the phone used the internet was during my sleep time
but it's so weired it has used the packet data for 30 seconds and the wlan fo 1.5 mins by it self ..............is this a virus or that ugly firmware is just full of **bleep**
please check your phones (log) and reply me back
thank you
Nokia E72-1 Black
firmware : 053.001
of 26 of nov 2010

well for the ovi sync i really use that app to sync my contacts and calender and it set to manual sync so i guess it wouldn't go by it self
as for the wlan data and packet data , last night was ok withou any connection don't know how
or what happened it seems the problem is solved but i will also make sure tonight of the problem still exist or not
all i did last night i have installed 2 app (m.gaurd(netqin) and kaspersky antivirus) to scan my mobile and it did but it seems that its slowind down my already slow mobile
and removed them today because they corrupted the interface of my snaptu application which i use for facebook (the highlight color disappeared but it was still working) so i had to uninstall it and reinstall back again
Nokia E72-1 Black
firmware : 053.001
of 26 of nov 2010

Similar Messages

So what's the difference bewteen "packet data" and...

just wanna know the difference between "packet data"and "highspeed GSM"while creating new access point in destination section.
totally confused,any help should be appreciated.

Essentially nothing.
Depending on what you have your compiler strictness level set to, you can get it to generate a warning when you use an uninitialized variable.
In Java, variables are assigned a default value dependent on type. All subclasses of Object are assigned a default type of null, and all primitive number data types are assigned a default value of 0.
This differs from (for example) C, where variables are simply assigned a location in memory when they are declared, and the value of the variable is whatever was currently in that memory location when allocated. Using uninitialized variables in C is generally a big no-no.
You'll find a lot of old-school C programmers who migrated to Java will initialize their variables :)
Btw, this question probably belongs in another forum.

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

I need an ethernet cable connection to a non-wireless device that isn't near my current airport express. Can I buy an extra one to plug in near the non wireless device to receive the wireless data and put the signal out in ethernet form?

Yes, you can.
This is a special feature of the AirPort Express 802.11n. You will have to set it up "manually" to "enable Ethernet clients".
If your "main" AirPort Express is an 802.11n version, it is also possible to setup the second Express to "extend a wireless network" to provide additional wireless coverage in addtion to enabling the Ethernet port.
If you need the steps, post back to let us know what operating system you are using on the Mac or PC that will be used for the setup of the new AirPort Express.

N80 Packet Data and Orange Internet

How do I set up Packet Data and Orange internet on my Nokia N80? Been looking at loads of tutorials but cant find them on my first N80 there was an "always on connection" and sending SMS is pretty slow any ideas about getting these settings? Been on a few sites but cant find anything for Orange Internet, Packet Data and SMS. Cheers

Either go to the Orange site, support, select N80 and go into each link for text, 3g, GPRS, MMS (some links will send you the sim update)
or phone Orange on 156 and ask for them to send you all the settings via SIM update for messaging, voice mail and data etc. Explain that you've got a replacement handset, and they'll prob send your account's settings via multiple updates (including roaming options and divert options).
Orange Handsets : Nokia 51 > NK702 (6130) > 6210 > 6310i (silver)> 7210i > 6230 > 6230i (silver) > N80 (silver) > N95-1
T-Mobile: N96

N8 3G and WLAN connections

Is it possible to turn off the 3G and WLAN connections so that the they are active ONLY when I need them?
Currently I have 3G connection active all the time even I do not do anything with the Internet or applications which are using 3G (main display is showing the "connected" character below the 3G letters).
Also I would like to turn off the "search WLAN" feature until I am going to use that connction. I do not want to turn it OFF completely just want to put it away until I really need WLAN. I do not want it to search the WLAN networks until I need the WLAN.
I would like to turn these connection off to save the battery.

As it was stated in several review articles, the connectivity concept on the N8 (formerly Symbian ^3) is still somewhat in an experimental state.
The introduced "Destinations" yet most of the programs are not aware of this functionality. My tipical scenario would be that I have:
- destination with all my WLANs and 3G for fallback
- destination with WLANs only
- destination with 3G only
this would allow me to direct my data flow exactly where I want it.
Instead what I get:
- AGPS goes out on a random (!) data connection
- S60v5 apps try to go the old way of "Define access point", being unaware of "Destinations"
- Gravity is even more confusing as it has its own WLAN option and absolutely disregards the phone options. It goes out on 3G even if there's WLAN available .
So the basic answer to your question:
at his moment can only check under connectivity what app is using your 3G data and check the setting within this app. You cannot generally disable 3G connection as far as I know
trying to get along with an N8

The setting date and time is not working

Bought an apple TV, installed it as per instruction, connected to my internet but the seting date and time is not occuring and the activation cannot occur either. Spent 1 hr on the phone with Apple support staff - they told me it may be a router blockage and to contact my internet provider. contacted internet provider , they tell me everything is working from their end so must be the apple TV device. I was told this was easy techonology and that I would not have issues - I have spent 3 hrs on this and truly frustrated as its not working . any suggestions would help!

That would be a network issue as you were initially advised. When the date and time can not be set it means it is having trouble connecting to the network.
Make sure router is up to date, reboot router and ATV. Make sure location is set correctly via ATV and also DNS (settings - general - network - configure DNS - automatic)
Make sure your router allows access over port 123.
Failing that try a restore on the unit

How to get the client date and time ?

Dear Sirs...
Using jdeveloper 10.1.2.0
How can i get the client date and time using the HttpServletRequest ?
thanks for any help in advance
best regards

If your code is running on the client pc you can just create a new instance of the java.util.Date class. That class automatically defaults to the current time of the client machine. Otherwise if you're running the code on the server, you could insert/post the client date/time by adding its string representation as a parameter to the HTTP request object.
Ronald

Save data and tcp connection

Hi,
I have a connection between a measurement roboter and LabVIEW. I transmit the data above an TCP connection (for example the coordinate plane of the sensor). I have different ports to transmit the data. Is it possible to save the transmitted data and the TCP number of the Port?
Attachments:
datasend.vi ‏20 KB

Hi,
Just use the:
>
Regards, Christian

HT4061 My Ipad2 has a message Ipad disabled connect to itunes. The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with. What can I do? I cant even access the serial number to contact apple. Help!

My Ipad2 has a message: Ipad disabled connect to itunes. The trouble is I am out of the US now and cant connect to my my home mac or any computer it is synced with. What can I do? I cant even access the serial number to contact apple. Help!

Call Apple anyway. If the device was ever registered with then they will have the serial # on file and can look you up by other info such as your name or phone number.
To re-enable an iPad any computer with iTunes should work. However, if your data was not backed up to iCloud you will not be able to access it until you get back to your home computer.

Regarding the Master Data and the MRP maintained.

Hi,
i have one query,my client has 4 plant,for manufacturing a product there are 10 operation.The 4 operation is taking on Plant A.The 5th and 5th operation is is in Plant B.The 7th operation is at Sub-contractor to vendor and return back to Plant A,and the remining operation is at Plant A.
So what are the Master Data and MRP we have mainted for that?
Please revert back.
Thanks,
Mohit

Dear,
Sub-contracting is carried out for 2 types-
1) Operation SubContracting & 2) Material SubContracting
You need to activate SubCon key (30) in MRP2 for the material which you want to send.
When you run MRP, it will check the system, if you have the stock as per requirement in the system. If the adequate stock is unavailable it will create PR, which you will need to convert in SubCon Purchase Order.
Operation SubContracting
You have to activate External Processing
"X" (T Code OPJ8) in PP01 Control key for that operation which u want to do externally
In the routing for the externally processed operation enter the control key as PP02
In the operation details screen in the External Processing tab enable the check box subcontracting
Enter thr info rec no and other details and save.
Thru ME58 Convert purchase requisition to purchase order Thru ME2O Send the material to subcontractor. .Migo receive the material from subcontractor (check theMovement type-541)
Hope it will help you.
Regards,
R.Brahmankar

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

HT1595 My AppleTV seems to be stuck on the "Setting Date and Time" load page

I just moved from a house to an apartment and when I hooked up my appleTV it said "Setting date and time" with a spinning load wheel and it's been doing this for a long time now. I hit MENU on the remote and tried going to Settings> General> Network like it said at the bottom of the screen, but nothing happened. It's connected to the right WiFi network, but the only icons it shows on the home screen are the 'Computers' icon (for Home Sharing) and the 'Settings' icon. My movies, music, tv shows, netflix etc. icons aren't showing up. I restarted it and got as far as the "Setting date and time" load page again, where it just sits and loads.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

First Date of the Given date and month

Hi Evryone,
I want to extract first day of the given date.
For Ex: i aam giving date "30-jan-2013" but i want to show "01-jan-2013".
In Oracle, Trunc function behaving mentioned above. So i need appropriote function in HANA to get the FIRSTDATE....
I observed HANA Given last_date function but what about First_Date function? can i use it?
Regards,
Chandrakanth

Hi Chandrakanth,
Did you have a look on this blog:
SAP HANA: Get the First Date and the Last Date of Month from a Given Date | WuaWua
There is LAST_DAY in HANA but not FIRST_DAY.
Since last day of the month may vary but first day of the month will always be '01'. Hence they may not have added that function.
So either you can follow that approach in the blog or you can simply replace the day '01'.
Regards,
Krishna Tangudu

The packet data and wlan connection runs automatia...

Similar Messages

Maybe you are looking for