The pages become too big for the screen on Macbook pro

Hello,
Yesterday I was watching a movie on amazon.com using my Macbook Pro (retina display if it helps). I connected it to my TV via HDMI and put it on full screen. After the movie I was too lazy to tidy up and went to sleep. This morning, when I opened it, on the 'safari' ( I don't know if its the same name in english because my computer is in french) and battle.net have 1/3 of the page is outside the borders of it horizontally and vertically. I also feel that everything is bigger. I tried restarting it or closing the pages and opening them again but it doesn't work. Please help    me because I use my laptop for everything I do and I need it as soon as possible. Please excuse any spelling mistakes.

Sorry I found what the problem was but I can only explain in french, you have to go to 'preferences system' then to 'Moniteurs' and click on 'Optimal (retina).

Similar Messages

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • Yahoo page is too big for monitor screen. How doI reduce size of yahoo page?

    When I open firefox the yahoo home page is too big for the size of the monitor.

    Hi,
    Try resetting the zoom by pressing '''Ctrl''' + '''0''' (zero) on the keyboard. Please [https://support.mozilla.com/en-US/kb/how-do-i-use-zoom?s=zoom+feature&r=0&as=s see this.]
    Useful links:
    [https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
    [http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
    [http://kb.mozillazine.org/About:config_entries about:config Entries]
    [https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
    [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
    [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

  • I just got Firefox and the page is too wide for my screen and I can't see the scroll bar or other tools

    I have a 19" flat screen monitor.

    A few things to check:
    (1) Full screen mode
    The F11 key switches between normal and full screen modes. Make sure you are in normal mode with all the regular bars showing.
    (2) Compatibility
    One thing that sometimes happens is that Windows sets up Firefox in a compatibility mode. If the whole desktop changes resolution when you start Firefox, then that is the first thing to check. Close Firefox, right-click the program icon you use the start it up, choose Properties, then the Compatibility tab, and clear out any checkboxes that might be checked there.
    (3) Zoom
    It is easy to zoom the page accidentally using the mouse scroll wheel. To reset zoom, you can use Ctrl+0 (that's a zero) or
    View menu > Zoom > Reset
    When you are using the orange Firefox button (short menus), you can tap the Alt key or press F10 to display the classic menu bar to use the old View menu.
    If those don't help, can you describe what sites are affected?

  • Why is it that the wallpapers are too big for the screen? I liked how in iOS 6 that you could make it whatever size you wanted. Please Please Please bring that back and you will have one happy customer!!!

    Is there is a reason why pictures in iOS 7 don't work well with setting your backgrounds??
    This needs to be changed back to iOS 6 style for setting backgrounds, otherwise everything else is good.

    "Why" - because Apple designed it that way, probably to allow for the motion-parallax effect in the iOS 7 home screen.  It has been this way since iOS 7 was released 6 months ago.  Why are you first noticing it now?

  • When firefox is loaded the display is too big for the screen & blocks out controls

    When I load Firefox Home, the display is too large to fit into the screen making it impossible to see the controls (Toolbar and log-out cross etc) This has only just happened, everything was working perfectly until about an hour ago

    Open the system menu via Alt+Space and see if you can resize that window.
    If that works then close Firefox (File > Exit/Quit) to save that setting.
    See also:
    * http://kb.mozillazine.org/Resizing_oversize_window
    If the above didn't help then see:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • The print is too big for the page, some of the article is cut off . Why?

    The printer was working fine. Suddenly that changed. Now when I print, the print is huge and a large part of the text is cut off. I tried reducing the size of the font but that did not help. This had happened to me before about a year ago and I tried different things with firefox and was finally able to fix it. However, this time I have tried all your troubleshooting tips and nothing works. The print function was working normally up to a couple of days ago and to the best of our knowledge neither my husband and I have made any changes to the settings.

    Firefox > Print -> Print Preview = what is the '''Scale''' set for?
    '''Shrink to Fit''' is usually the best setting for most web pages.

  • PC - TV [Video too big for TV Screen.]

    Hi,
    I'm running Windows XP with an FX 5200 128 Video Card. I have an S-Video plug that turns in to a Yellow RCA wire and plugs in to my TV. I have my display properties set to "Clone".
    When I play a video using Windows Media Player, I can see it on my Computer Screen as well as my TV.
    However, the picture on my TV seems to be slightly cropped. It looks like I am missing the TOP and SIDE portions of the Video. The video fills the entire TV screen, but it looks like the picture is too big for the TV and I'm not seeing the edges.....
    Any suggestions,
    Thanks,
    Andrew.....

    make sure you're using the correct display drivers from nVidia Drivers
    then in the driver control panel for your TV settings, use the zoom controls to adjust how the picture looks on your TV

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My iPad standard window is bit too big for the screen.

    My iPad screen unexpectedly got slightly too big for the display window. The size is bit too big. For example, the keyboard when it pops up does not fully display all tkey sans. Another example is the time/power remaining bar slips out of sight.  Did I accidentally change something?  Is this an issue with version of iOS that I am using (4.3.3)? (Note I'm not talking about resizing by using your fingers.)

    John,
    I am having the same problem.  The enlargement is not the same as the 3 finger tap or the 2 finger zoom.  The screen opens and then bumps to a slightly larger screen just enough to make it too big to see the outer edges.  You can put 3 fingers on the screen and move the screen to see the edges but you cannot get it to shrink to the correct size.  This is the second time this has happened to me.  I am also having some other issues.  Sometimes while in an app the app will close and I will be diverted to the home screen.  And sometimes when playing "with Friends games" the letters on the letterboard (not the key pad) disappear, will not move or are giant.  I plan on taking it back to the Apple store this week but I hate the idea of having to start over.

  • Why is itunes too big for my screen? i'm on the highest resolution. i'm on windows 7 on a sony vaio ! please help !!

    why is itunes too big for my screen? i'm on the highest resolution. i'm on windows 7 on a sony vaio ! please help !!

    Resize it.

  • Screen on my phone it seems to be too big for the phone

    Don't know if this a major problem but its bloody annoying! I've installed os 3.0.1 on my iphone 3gs 16gb and there was no problems, however when I looked at the screen on my phone it seems to be too big for the phone, only by 1-2mm. I'm able to move the screen either up or down by touch but its annoying, I can either have my signal strength, clock and battery showing or the phone,mail, safari and ipod at the bottom, obviously I keep the top of the screen visible but it wasn't like that before I downloaded that stupid update!! I would rather go back to 3.0 but I can't find it anywhere? any ideas anyone

    Have you zoomed in a little as per p. 187 of the manual... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
    If not, try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

  • My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

    My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

    Hi Hannah,
    Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
    To set a tab stop on the go, click in the ruler.
    If you can't see the ruler, Menu > View > Show Rulers.
    To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
    Also, have a look at Menu > Pages > Preferences > Rulers.
    Regards,
    Ian.

  • My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

    My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible.  Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

    Have you tried resetting Preferences?
    A logical next step would be to reset your Preferences.
    To reset Preferences:
    If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
    A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

  • Page header plus page footer too large for the page in crystal report 2008.

    Hi,
    when we selecting pieview and print after entering paramter it's showing error: page header plus page footer too large for the page. error in File.rpt page header or page footer loanger than page. and it's not showing print layout format if i connect another printer it's showing layout designe. and some times it's showing letter formate and if i give print it's taking default lamdscape but we setup defual setup for printer 10*12 inches in particular printer.please guide me how we can solve this issues.
    regds,
    samapth

    This is a really hard post to read. See if you can take a bit of time to reword it, but one thing I do understand is that you are getting this error:
    page header plus page footer too large for the page.
    Typically, you can trust that if the error is thrown, it is true. E.g.; this is not one of those errors that says one thing, and means another. I suspect that you have some field(s) in the header(s) that grow, depending on the data. If there is too much data or the data is too long ( a text for example), the error will be thrown. To resolve this, see if placing the field(s) into a group footer / header will help.
    Ludek

Maybe you are looking for

  • Problem while invoking webservice-method in client-code

    Hi, I had written webservice-client-code (using uddi-ext.jar, as i am using uddi for publishing webservices.) which is invoking webservice method successfully with complex datatypes(both for return type and input paramters). But while calling followi

  • Creating a Webservice for portal Component

    Hi experts , i have portal component , for which i want to create webservice , i e. wanted to publish it as a  wsdl , Im using NWDS 7.01 and here i have already created a portal component of type JSPDynpage , now in nwds after opening Webservice Pers

  • Client deletion taking long time....

    Hi All, I have been going through tough times in SAP ECC right now. I am doing a client deletion using SCC5. Total entries in tables were 58514. It was going fine till it reached 58504. From then onwards, the tables SAP is deleting are having crores

  • Vendor Pmt Terms

    Hi folks, I am trying to create <b>2 vendor pmt terms</b> in OBB8. I am clueless on how to go about creating them. I would appreciate any help. The terms are as follows: 1) Due 1st Day of the month 2) 50% with PO, Balance-Delivery Any one have an ide

  • Analysis server problem(accessing cube)

    I have cube deployed on Analysis Server(MS SLQ 2012 BI Edition). Browsing cube throu SQL manager works fine. But when I try to access cube any other way, it fails.Connection throu Exel lets me see database but cube window is empty. Same happens when