The "pair a device icon" on my desktop is not showing ? How do I make it sow to pair with me Android Samsung s2

To sync Samsung s2 Android phone with Desktop, the instruction is to go to Firefox home page and click on "pair a device" icon at bottom of page. This icon is not on my home page ? Where is it and how do I get it to show ?

Hi!
You can find the same button in the Preferences window if you navigate to the Sync tab. If you don't see that, it's because you haven't configured your Sync account in your computer yet.
I'm not sure if you have seen this article but it may be helpful for you: [[How do I sync Firefox between my desktop and mobile?]]

Similar Messages

  • I sent my iMovie to iDVD and the iDVD icon on my desktop is not showing up?

    I sent my iMovie to iDVD and it is not coming up!

    Your problem may not be exactly the same as that of the original poster of this old thread, and it can be very confusing for everybody if we try to answer more than one question in each thread.
    In order for us to give your problem our undivided attention to try to solve it, would you kindly start your own thread, describing the trouble you are having in the fullest detail, including completing your details to show what Mac you are using, what operating system, and what version of the application in question.

  • When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?

    When plugged my samsung in USB as memory device no new device icon appears at desktop like it used to do in snow leopard. But USB prober recognizes the phone... Why and How?

    OK, I think you are trying to connect the printer wirelessly to your wireless router, right?
    I think that is the way to go, so let's do that:
    1. Restart the router by pulling its power cord momentarily.  Let it restart.
    2. On the front of the printer go to Setup > Wireless (or Netowrk, not sure) > Wireless Setup Wizard.  Run the Wizard to connect your printer to your router.
    3. After that, go to Control Panel > Devices & Printers and delete all instances of the printer.
    4. Finally re-add the printer with these instructions:
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
    2. Click >> Start >> Control panel >> Devices & Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • The icons on my desktop have disappeared. How do I get them back?

    I have HP laptop model no. G60-630US with Windows 7.
    The icons on my desktop have disappeared.  How do I get them back?
    Lee Ann Wells

    Hi Lee Ann,
    Try this:
    Right-Click in any clear spot on your Desktop > then Click to CHECK "Show desktop icons"
    Kind Regards,
    Dragon-Fur

  • Flash player 10.3.1.8.34 (lastest verison)icon on my desktop ,does not work ?

    .I>m using windows7 OS IE9 downloaded and installed fifty times and it always say download and installation was sucessful ,that I"m now using flashplayer 10.5 ect. there is the flashplayer icon sitting right on my desktop .from control panel in programs there is is adobe flash player in the list. every time i click to view a video,says to view this i need to download flash player over and over, I"ve read all the other post.tried all the answers ,been to all support sitesmore than 10 times each I"ve been up all night again it"s now morning  i"m still lost.all help will be appreciated...................................                penny

    Yes all that u sugested i followed from the help and support at adobe.Now i downloaded flashplayer beta 11 and it"s working perfectly .I"m at peace for the moment.In my profile i "ve given my PC model and the whole works on my system.for the record I"m using windows7,IE 9,64bit shockwave is enabled and active xfiltering was disabled it just would not work..
                            thank u very much
    From: ʇɐb ɹəuəllıʍ <[email protected]>
    >To: penny torrence <[email protected]>
    >Sent: Monday, July 25, 2011 8:57 PM
    >Subject: Re: flash player 10.3.1.8.34 (lastest verison)icon on my desktop ,does not work ?
    >
    >
    >1. There is no Flash Player 10.5; the currently available version is 10.3
    >2. What Internet Explorer version are you using: 32-bit or 64-bit?
    >3. What Windows version are you using: 32-bit or 64-bit?
    >4. Have you checked the add-ons on IE9 (Shockwave Flash Object); is it enabled?
    >5. Have you checked ActiveX Filtering on IE9; is it enabled?  (It needs to be disabled.)
    >

  • Why are my desktop files not showing on the desktop

    Why are the files in my desktop folder not showing on my desktop?

    An add-on can put its icon on the bar automatically if it likes, but some add-ons do one of the following:
    * Add an item to the Tools menu
    * Add an item to the right-click menu (depending on the context)
    * Put a button in the button palette so you can add it to a toolbar if you like (''to call up the button palette, use'' View > Toolbars > Customize ''or right-click a blank area after the address box on the Navigation Toolbar and choose Customize from the pop-up menu'')
    Also, you might want to double-check that the add-on is enabled.
    Tools > Add-ons > Extensions
    If you have the orange Firefox button, it's Firefox > Add-ons > Extensions
    Does that help? (If you have problems with a particular extension, you could mention which one it is for more specific comments.)

  • Time machine icon does not rotate and back up icon on desktop does not show during backup session.

    Time machine icon does not rotate and back up icon on desktop does not show during backup session since I installed Maverick.  Why? How do I fix it?

    That's the new look of it. No way to change it other than file a complaint with Apple. If ENOUGH people do thst they may "fix it".
    http://www.apple.com/feedback/macosx.html

  • TS3716 installed the new itunes and now my ipod nano  does not show in the device menu

    installed the new itunes and now my ipod nano  does not show in the device menu

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • When I switch on, the Apple and progress icons appear but it does not start.

    When I switch on, the Apple and progress icons appear but it does not start. I tried resetting PRAM, Utilities, everything. It says the system is OK. I even reinstalled Tiger, but nothing has changed.

    Given that you were able to reinstall the OS, you must be able to boot from the install disc.
    Have you run Apple Hardware Test?
    Tried running on just one RAM module, then switch it to other slot, then repeat with other module?
    Safe Boot?
    Checked SMART status?
    Run Repair Disk:Boot from install disc (insert disc > restart > immediately hold down ckey and keep holding it until you see “Preparing Installation”) > at firstscreen select the language and click Continue > click on the Utilities Menuin the menu bar > open Disk Utility > select your HD in the panel on theleft side> click Repair Disk at bottom of main window. Run this at leasttwice, and keep running it until it says “appears ok” twice in a row. If thatdoesn’t happen, you may need a stronger utility such as DiskWarrior or if thedirectory is damaged beyond repair, you may need to reinstall the OS, or youmay have a damaged HD (repair utilities can only repair the directorystructure, not the HD itself). When this is finished, quit Disk Utility, quitthe installer, and restart. Once booted normally, go to Applications >Utilities > Disk Utility and run Repair Permissions.

  • Do anyone know why the desktops do not show? Is this a bug?

    Do anyone know why the desktops do not show?

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • How do I make a hands free call with the iphone 4s?

    How do I make a hands free call with the iphone 4s?  I have a bluetooth car device and when I try to talk through it (as I did with my old phone) to call someone it does not work.  so far only hte last person called is redialed.

    That is a carrier-based service. So first you have to make sure your service contract includes that feature.
    It usually also includes Call Hold. So you call the first party, put them on hold, call the second, then reactivate the first. But only if your carrier allows you to.

  • My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

    My iPod touch was stolen and recovered.  I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

    If the thief enabled activation lock on the device, then there is nothing that can be done.  Only the password for the Apple ID that it is locked with can disable activation lock.

  • Assign to desktop option not showing up for a few programs

    Hi!  Well Assign to desktop is a great feature.  The problem I am having is that it does not show up under options for several programs.  It does show up with others.  Two of the programs it is not showing up with are Lightroom 4 and SpeedGrade from Adobe's CS6 cloud.  It does work with Photoshop and Premier and After Effects from the same suite.  Anyone have any ideas why?  Thanks.

    Perhaps, you should try to reset your preference file to see if it corrects itself.  I have posted the instructions at this link:
    http://forums.adobe.com/thread/1097046?tstart=0
    Good luck.

  • HT4689 My desktops are not showing up in mission control

    When I use mission control my desktops do not show up, however they are there (just invisible) because if I hover over where they should be and click I am taken to that desktop.

    Hi Jeff,
    Exactly - I do not see them under my account. I have already deleted history, cookies, etc., had my password reset 2x and tried 2 other browsers. I have all my serial numbers that I've saved at home.
    The problem is that I do not see any of my products beyond 2012. I only see a few under orders. I don't see any that should be registered.
    I'd attaching a couple of screenshots so you can see what I see (serial #s and personal info covered up with gray boxes). I should be able to, right? I used to  be able to. This happened 2 years ago as well and finally someone fixed it. Obviously there should be a lot more listed.

  • I upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3?

    i upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3? all my best and regular apps are not working and i need them! so how do i down grade

    There is no legitimate (Apple supported) way to downgrad an iOS on a device.  Have you tried downloading/installing a new (free) app.  That works for many users with that problem.

Maybe you are looking for