The Palm OS module compiler gives an unknown error.

I have just installed LV7.1 with the PDA module. I have followed the getting started instructions and have found the following problems:
1. I am unable to upload the ROM image for the emulator. The computer and the PDA simply do not comunicate.
2. When I try to build an application, after a few seconds of apparently good behaviour I get an error saying that I have got an unknown error and I should contact NI.
3. In addition, I have LV7.0 installed in my computer, and I did installed the PDA module, however I never activate it. I have now uninstalled it.

Thanks
Yes I do understand this. I have uninstalled the PDA module and reinstall it again and now it does work. However I am still having some problems.
1. I am working with two PDAs, a M515 and Tungsten C,therefore different OS(v. 4.01 and v. 5.2.1).
2. I have begun doing some of the examples. From the ones I have tried most of them seem to work fine except for the graphing calculator. I get an error saying that the code is too big.
3. I cannot use the download command from Labview. It asks me to perform a hotsync, and when I do it nothing happens.
4. The LabView conduit is giving me problems. If I use the Labview conduit to install a program in any of the PDAs, the program appears in the info list of the PDA, however there is no icon. Also
the program image in my hardrive shows the file as if it has 0K size after the hotsync.
5. If I use the normal installation conduit, the program does download and install correctly and the file image in the hardrive shows its normal file size. However, each time I run the program in the PDA it begins looking for a host: "Waiting for host". I press the cancel button and everything works. There is no advise about this strange behaviour in the release notes.
I hope you can help.
Regards
Alberto

Similar Messages

TS3694 Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.

Hello. I have an iphone 3gs 8gb factory unlocked. Currently its running on ios 5.0.1 and I am trying to update it ios 5.1.1 but its not updating. The itunes downloads the ios 5.1.1and gives back unknown error(3194). Please help.

Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

My ipad mini is stuck in dfu mode trying to restore it with ios 7.0.2 it completes the bar(restoring ipad software) then it gives me the ipad could not be restores. an unknown error occured(14)

my ipad mini is stuck in dfu mode trying to restore it with ios 7.0.2 it completes the bar(restoring ipad software) then it gives me the ipad could not be restores. an unknown error occured(14)

Are you using a valid Apple charger that came with the iPad?
Attempting to use a computer USB port, an incompatible charger, or attempting to charge via a wall socket that only receives power from a wall switch — can all lead to a low, or depleted battery condition. Has this iPad been wet, or dropped?
Verify all of the above, and correct. If the iPad still cannot hold a charge, consider taking to an Apple Store, or authorized service provider to evaluate it.

Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50). Everytime I try to sync my phone?

Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.

What operating system do you have on your computer?

HT201210 Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle o

Help, I just gave iTunes the assignment to update my iPhone5 to iOS7 and now it gives an unknown error (6). The iPhone is still hooked to my laptop, and shows the black screen and bright Apple with the horizontal bar, telling it's in the middle of something. What should I do?

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

Error Compiling Movie. Unknown Error. Premiere Pro export failure

Error Compiling Movie. Unknown Error. I get this message when trying to export my timeline to any format. It exports for a while then I get this message. When I try to export using media encoder it just gives me the sheep sound. I'm starting to hate that sheep.
Does anyone know how to figure out why it throws up this error message and what the solution is to get around it? I've wasted countless hours trying to figure out a work around. I can't just scrap this project it's taken me weeks.
I've been able to export just fine dozens of times prior to this so I'm not sure it matters what my specs are but here goes:
custom built PC with windows 7pro SP1
Intel(R) Core(TM) i7-2600K CPU @ 3.4GHz 3.7 GHz
16GB ram
64-bit OS

After implementing many suggestions here I was able to export the 9min project successfully. I need to take you all out to dinner.
I'm not sure which suggestions did the trick but I have a feeling it was a combination of ideas that did the trick. Here is a breakdown of what I did to modify the project in order to get it to successfully export:
1.) Reset all stills in the motion tab to original settings & then right clicked on them in the timeline and selected "scale to frame size".
2.) Replaced all nested files with the original tracks.
3.) Changed the sequence settings (changed Editing Mode to Custom and Under Video Previews Section > Select Preview File Format as Microsoft AVI, Codec Uncompressed.
I had to re-render all previews after changing the sequence settings and I got I/O errors during that process but restarting Adobe Premiere CC somehow solved those errors. Many times during the process of modifying the timeline (based on items 1-3 previously mentioned) I had to restart Premiere due to a loss of preview screen and inability to render things out. In the end I was able to get it to successfully export so again I thank you all. This was a VERY important project for me and I'm serious about taking you all out to dinner

Error compiling movie. Unknown error. In both Premiere and Media Encoder

I am trying to export a a batch of six sequences, out of Premiere Pro CC to my internal hard drive using the Apple ProRes 422 Quicktime setting. All of the sequence exports are failing in the first couple of seconds. This happens if I do them individually directly out of Premiere and if I export them out as a batch to Media Encoder. All get the same "Error compiling movie. Unknown error." error message. I have tried restarting the computer, that didn't fix it. I had the same problem with some other files yesterday but I was able to export them out individually OK. But with this batch, no dice. The sequences are all fully rendered. There aren't any problematic clips in the sequences, not that I can tell. None of the sequences is very long, only about 1-2 mins each.
Any ideas?
My system details are:
MacBook Pro (Retina, 15-inch, Mid 2014)
2.5 GHz Intel Core i7
16GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 750M 2048 MB
plenty of space on my startup disk

Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172

"Error compiling movie. Unknown error" while rendering a .PSD or .PNG

Hi,
I have this problem: When I try to make a "Render Selection" or export my video, everything is ok until I reach a .PSD file I've placed almost in the end of the clip.
The same is for .PNG file, a dialog appears saying "Error compiling movie. Unknown error".
I've tried to delete the effects, but it's the same. To be more specific, I've applied a simple "Cross Dissolve": Until the transition is working, and the picture is not entirely visible, the rendering works. When the picture is "complete", the render stops and the error appears.
When I tried to delete the transitions, the error appeared in the beginning of the .PSD picture.
Any help?
Thanks

Are you stills in RGB format? what pixel size are they?

Error compiling movie. Unknown error - When exporting

Hi everyone.
Exporting movies in Premiere PRO won't work for me. This error shows every time I export movie.
- Source File: C:\Users\addo\AppData\Local\Temp\Merianna_5.prproj
- Output File: C:\Users\addo\Desktop\Sequence 03.m2v
- Preset Used: Custom
- Video: NTSC, 720x480, 29.97 drop frame [fps], Lower, Quality 3,1
- Audio: 192 [kbps], 48 kHz, Dolby Digital
- Bitrate: VBR, 1 Pass, Min 1,50, Target 4,00, Max 7,00 [Mbps]
- Encoding Time: 03:10:33
17.5.2009 21:07:25 : Encoding Failed
Error compiling movie.
Unknown error.
And when i'm opning the same project with CS2 I get this messege when it loads the project.
C:\Users\addo\Documents\Adobe\Premiere Pro\3.0\Meriana.prproj
Video Transition missing: ADBE Dip To White
The format of the movies that I'm exporting is wmv and iv'e tryed exporting into other format like avi or wmv but the same result.
The hardware spec..
Intel Core 2 Duo @ 3.2 GHZ
Ram : 3 GB
8800 GT Nvidia 512 MB
Harddrives : 320 GB + 160 GB
Windows 7 RC1 (Could be the problem?)
Here are the site's that iv'e been shecked.
Error:Error compiling movie
dvinfo.net
Thanks for the help evry one...

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

The iPhone cannot be synced. An unknown error occurrred (-50)

I upgraded my unibody macbook to OSX Lion, iPhoto to '11 from '09 and iTunes to 10.4. Now, my iPhoto library no longer syncs with my iPhone. It gives error "The iPhone cannot be synced. An unknown error occurrred (-50)".
Any ideas why?

Okay, I looked at the MAC log and found that a daemon was busying up iTunes and my system in excess. The cause was RIM software to support my daughters blackberry. Since she now has the software on her laptop, I deleted mine and that fixed that problem.
Researching other entries in the log pertaining to iTunes, I found that esentually iTunes 10.7 is basically broke. With iTunes 11.0 coming very soon, Apple will not want to worry about any bugs with 10.7.
Consequently, we have to just wait and hope that the iTunes version will be better.

The iphone could not be restored an unknown error occurred (21)

Hi,
Suddenly my iphone got switched off, so i tried to restore it - but now im getting the iphone could not be restored an unknown error occurred (21)
i think once i got OS update this issue is occuring
kindly give a solution for this issue
Thanks in Advance
Regards
Babou gv

Read
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

In my MAC OS X 10.6.8 appear this msg "The operation cannot complete because of an unknown error (PARM)"

In my MAC OS X 10.6.8 appear this msg "The operation cannot complete because of an unknown error (PARM)"

When I called Adobe, I was pretty much told that they would not offer any assistance. I offered to purchase the incident support, but they said that wasn't an option with this problem. I had to badger the guy just to get him to say that he believed it was caused by an inability of our network account users to write to the local hard drive. What is below is the results of my attempts to research and solve the problem from that point.
The way we addressed it was to make a second partition (only 10GB) on the local computers and give full read & write access to it for everyone. Then, we instructed our students to set their Scratch location to that new partition. This does indeed resolve the [PARM] error and some problems trying to save and open large files. It does not address the SUITEPEA errors we are getting in our console log though.
To change the Scratch location:
- click Illustrator in the menu bar
- select Preferences
- click Plug-ins and Scratch
- use the drop-down menu to change the Primary scratch disk
- click OK
Sadly, the above must be done per each individual user and I have not yet found a way to push the preference using Workgroup Manager since the Illustrator preference file is not a normal .plist and the Scratch portion is a rather lengthy string of characters. Adobe did not make this one easy on us and they're not willing to support it (or weren't in my case).
I wish the rest of you better luck than I have had on this issue.
The funny thing is - if Adobe used /Users/Shared for the default scratch location instead of whatever location it currently is, I don't think this would be a problem since all users (in a default Mac OS X install) have full access to /Users/Shared

IOS developer program gives "An unknown error occurred. Please try again." on registration.

Hi,
I am trying to register in iOS developer program but it gives "An unknown error occurred. Please try again.".
I tried different browsers (Google Crome, firefox, IE, safari), I also tried registering from iPad but the same error occured, I am trying this from 1st April, but it still not resolved.
Also the country is showing blank, hence I am not able to select the state. (I am from India).
Please help, thanks in advance.

I had the same issue (from United Kingdom), fixed this by inspecting the page and changing the country input type from 'hidden' to 'text' and manually entering 'United Kingdom' in the text field.
Country still displays as blank on the next page, but I'm able to proceed past that without the error.

The operation cannot complete because of an unknown error. [Parm]

I manage computer labs for a small college and we recently installed Adobe CS3 Design Premium on our Macintosh labs. When a user launches Adobe Illustrator CS3 (13.0.2), they see a widget with the Ai (Adobe Illustrator) icon and the following text "The operation cannot complete because of an unknown error. [Parm]" and an OK button. At the same time, the console log (~/Library/Logs/Adobe Illustrator CS3/AISuitePea.log) is flooded with something called SuitePea throwing errors, such as these below (this is only a small portion of those thrown):
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1397908844 (leRS)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1397908844 (leRS)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:33:17 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:37:18 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:37:18 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:37:19 SuitePea Threw error 1394689636 (dF!S)
Sep 06 14:37:19 SuitePea Threw error 1394689636 (dF!S)
Some google searching suggested multiple means of dealing with this, from Disk Utility Permissions Repair to plug-in issues/removal. So far, nothing I have tried has yielded any results. My latest attempt was fully uninstalling CS3 using the utility on the CD, and then manually removing all remaining portions I could find on the hard drive (prefs, remaining folders, etc...), rebooting, and then resintalling, but have found I encounter the same result.
Does anyone know what this SuitePea is or what to do about this kind of error?
System Information:
Clients are running Adobe Illustrator 13.0.2
Intel-based iMacs running OS X 10.4.10
User home directories are on a network share, not local
Any help would be appreciated. Thank you,
Branden Ohlinger

When I called Adobe, I was pretty much told that they would not offer any assistance. I offered to purchase the incident support, but they said that wasn't an option with this problem. I had to badger the guy just to get him to say that he believed it was caused by an inability of our network account users to write to the local hard drive. What is below is the results of my attempts to research and solve the problem from that point.
The way we addressed it was to make a second partition (only 10GB) on the local computers and give full read & write access to it for everyone. Then, we instructed our students to set their Scratch location to that new partition. This does indeed resolve the [PARM] error and some problems trying to save and open large files. It does not address the SUITEPEA errors we are getting in our console log though.
To change the Scratch location:
- click Illustrator in the menu bar
- select Preferences
- click Plug-ins and Scratch
- use the drop-down menu to change the Primary scratch disk
- click OK
Sadly, the above must be done per each individual user and I have not yet found a way to push the preference using Workgroup Manager since the Illustrator preference file is not a normal .plist and the Scratch portion is a rather lengthy string of characters. Adobe did not make this one easy on us and they're not willing to support it (or weren't in my case).
I wish the rest of you better luck than I have had on this issue.
The funny thing is - if Adobe used /Users/Shared for the default scratch location instead of whatever location it currently is, I don't think this would be a problem since all users (in a default Mac OS X install) have full access to /Users/Shared

I'm having this message when I try to export my video from Premiere Pro: "Error compiling movie. Unknown error"

I'm having this message when i try to export my video from Premiere Pro:
"Error compiling movie. Unknown error" Do anybody knows what to do?

1st, I moved your message to the correct forum
2nd, More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
3rd, Error Compiling Movie... some past discussions and ideas
-http://helpx.adobe.com/premiere-pro/kb/error-compiling-movie-rendering-or.html
-http://helpx.adobe.com/premiere-elements/kb/error-error-compiling-movie-render.html
-and nested sequences http://forums.adobe.com/thread/955172
-and WMV files frame rate http://forums.adobe.com/message/4629210

The Palm OS module compiler gives an unknown error.

Similar Messages

Maybe you are looking for