The partition on my T400s lost with unknown reason

The partitions on my T400s lost with unknown reason. The virus was suspected for the demo version of Norton antivirus tool were due. I have to recovery my system to factory setting. But to my surprise, the laptop can not be booted any more. I don't know why. Is there anyone tell me how to deal with it. Thank you very much.

Have you tried restarting both the Mac and the External Hard Drive?
I doubt it, but it's not a bad idea.

Similar Messages

TS3048 My bluetooth mouse usually loss with unknown reasons and it then automatic connected again after some clicks.

Dear Sir or Madam,
I have bough my Macbook Pro since 8 months ago and it seams quite good upto now, however in these days my Bluetooth mouse ussually lossed with unknow reasons and it then automatic connected again after some clicks.
I have check mouse battery as well as relevent reasons like turn-on, but it still repeated and I don't know what is exact problem, it due to my mouse or my mac?
Thank you very much and looking forward to your help.
BR

Check your Bluetooth, do you have a bunch of stuff listed in there that you are no longer using?
Or another peripheral you stored away in a cabinet near by?

How to change the partition type on a table with data

Hi
I have a table, which is partitioned by list on date column. The table contains large volume of data.
My requirement is to make the list partition into range on the same date column.
I am working on Oracle10g
Kindly advice

partitioned by list on date How many distinct DATE values do you have ? Each DATE value would be a Partition in List Partitioning.
Why do you need to convert this to RANGE Partitioning ? How many DATE values do you expect in the table in the future ?
You can use DBMS_REDIFINITION to copy a LIST Partitioned Table to a RANGE Partitioned Table and then switch the tables at the end.
See examples (where the source table is not partitioned)
http://www.oracle-base.com/articles/misc/partitioning-an-existing-table.php
http://uhesse.com/2010/02/15/partitioning-a-table-online-with-dbms_redefinition/
But before converting I would justify why a LIST Partitioned Table be converted to RANGE Partitioned. Do you have Date-Range queries ?
Hemant K Chitale
Edited by: Hemant K Chitale on Mar 15, 2013 2:11 PM

I can't open the Itunes application, keeps coming up with unknown error occured

I can't open the itunes application on my mac book air. Keeps saying that an unknown error has occurred with (13014)???

iTunes error 13014

When using fire fox I have a problem reading pages from my site. This is a new problem. The format appears to be lost with fire fox but not IE

I have been using FF for several years and well as front page to maintain and upload to my site. As of two days ago I started getting comments that recently updated pages were not readible. I have not changed any settings but have found out that what can not be read in Fire fox can be read just fine in IE

Can you post a link to a public page that doesn't require authentication (log in) to access it?
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
*https://support.mozilla.org/kb/Websites+look+wrong
If you use extensions (Tools > Add-ons > Extensions) like Adblock Plus or NoScript or Flash Block that can block content then make sure that such extensions aren't blocking content.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

My account was frozen with unknown reason please h...

To Skype staff,
The first day I registered SKYPE and paid HK$100 for the points and I didn't even finish my first call, the account was frozen up and I completed all the steps according to the instruction. Now I have to sign in with another name to leave message here. I want someone to contact me and help to restore my account.
What kind of system you are having ? If such problem continue, I am not going to use it anymore and please refund my money. It is just like cheating! I paid and I was frozen and I could go nowhere to get assistance.

Hi, globalluck28, and welcome to the Community,
You will need to contact Skype Customer Service to sort this. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Fms edge connected refused with unknown reason.

i found some error logs in edge.*.log, like this.
2012-11-14 18:39:04 3903 (e)2661034 Connect failed ( , 1161928336 ) : Connect failed: Connection refused (111) -
2012-11-14 18:39:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 18:40:31 3903 (e)2661034 Connect failed ( , 3 ) : Connect failed: Connection refused (111) -
2012-11-14 19:47:46 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 19:48:28 3903 (e)2661034 Connect failed ( , 16 ) : Connect failed: Connection refused (111) -
2012-11-14 19:49:10 3903 (e)2661034 Connect failed ( , 1170349712 ) : Connect failed: Connection refused (111)
it seems because of invalid ports resulst in TCP connection faild.But abvously, these ports are not used in the applications, even some port is out of valid port range. Does anyone konws what the reason.
btw, there are two adaptors on our machine, one is for intranet, the other is for internet. And the lattter is configured with to IPs
like this:
eth0      Link encap:Ethernet HWaddr 00:21:5E:26:62:28
          inet addr:******* Bcast:******* Mask:255.255.255.0
          inet6 addr: fe80::221:5eff:fe26:6228/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:116994653 errors:0 dropped:0 overruns:0 frame:0
          TX packets:151851798 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:52655302829 (49.0 GiB) TX bytes:124235260628 (115.7 GiB)
          Interrupt:106 Memory:ce000000-ce012800
eth0:1    Link encap:Ethernet HWaddr 00:21:5E:26:62:28
          inet addr:**** Bcast:**** Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1

Is there any info in the node manager log files?
You can try changing the health check timeout.
# Health Check Interval: Specify the interval (in seconds) between Node Manager health state queries to the Managed Server. Enter a value between 1 and 2147483647 seconds (default is 180 seconds).
# Health Check Timeout: Enter the number of seconds that Node Manager will await a response to a health state query. If the timeout is reached, Node Manager assumes the Managed Server is "failed", and kills the process. Enter a value between 1 and 2147483647 seconds (default is 60 seconds).

HT1551 i keep getting the message "can't sign in for unknown reasons"

in multiple areas i keep an error message about not being able to sign in, yet when i checked i was signed in to my itunes account on my appleTV

Hello KathyBrust
Check out the article below to go over a few troubleshooting steps with issues connecting to iCloud. If you are still stuck, there are other resources to get a resolution.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
Regards,
-Norm G.

Registered for a number with unknown reason

To Whom It May Concern,
I have been abroad for the past couple of months and recently received an email from AT&T saying my payment could not be processed. As I was reviewing my charges on my AT&T account, I saw that I have another number registered under my name - ***. I have never registered for another number other than the one that I am using and should only be paying for (***). Please help me look into when and how that number came to be registered under my name. I would also like to find out why my payment has failed to process various times.
Sincerely,
Alice [edited for privacy-please do not post personal or unique information such as but not limited to full names, employee ID numbers, email addresses, phone numbers, account numbers, etc.]

Good Afternoon ,
Thank you for seeking resolution for the billing errors you are experiencing. I’m sorry that you have to clear this up while being abroad; our Customer Care would be able to resolve this issue.
Since you are out of country at the moment, if you call the number +1.916.843.4685 (Free from mobile, available 24/7).
If you have a GoPhone account, you can call Customer Service at 800.901.9878.
To manage your wireless account digitally, please download the myAT&T app on your phone. Text EASY to 8758 for a link to download the app!
Thank you,
Charise

VMM is unable to complete the request. The connection to the agent sphyperv5.IMCB was lost

We are getting the following error. This seems to be after installing the DPM 2010 client. Not sure if there is a connection.
Error (2916)
VMM is unable to complete the request. The connection to the agent sphyperv5.IMCB was lost.
(Unknown error (0x80338012))
We never really lose the host. Everytime I look everything looks fine. Any ideas?
Michael Bishop

This issue is not solved yet, we still invetigating
https://social.technet.microsoft.com/Forums/systemcenter/en-US/f013134b-3059-4ba2-bb3d-fb422c1b7c33/error-2931-vmm-is-unable-to-complete-the-request-the-connection-to-the-vmm-agent-on-the?forum=virtualmachingmgrhyperv
Regards, Samir Farhat Infrastructure and Virtualization Consultant || Virtualization, Cloud, Azure ? Follow and Ask here https://buildwindows.wordpress.com

Computer Policy is not executing batch script in startup(Unknown Reason)

I have a Win2008r2 domain with Win7 clients. I use batch files all the time in Group Policy Startup Scripts and never have any issues. I have a batch file that is trying to run setup with some switches to remove a program. It is not working.
If I browse through gpresult on the client, and also through the Group Policy log on the client, I can tell that the client is detecting and trying to apply the policy, but it is saying NotApplied(unknown reason). It is not being filtered out, etc.
I actually see the 4016 event ID for "Starting Script extensions Processing" and it names the GPO I am testing with. So I rebooted a few times and the batch file never runs, but if I browse to the Policy UID in sysvol and run the simple
batch file with my account, it runs fine. All the batch files is doing is this, but the system account never even copies the file down from Sysvol. Anyone have any ideas?
Copy SilentUninstallLync.xml c:\Windows\Temp\
"C:\Program Files\Common Files\Microsoft Shared\OFFICE15\Office Setup Controller\setup.exe" /UNINSTALL Lync /config c:\Windows\Temp\SilentUninstallLync.xml
Dave

> I am not sure, either.
I am.
If you run a Script from Group Policy Folders, the current directory is
a UNC path. cmd.exe doesn't support UNC paths, so it changes to what it
knows best: %Windir%\System32.
Since your copy command references the source file without a path, copy
looks for the file in the current directory. Which now is
%Windir%\System32...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Photos erased in catalog = loss of hundreds of treatments with no reason

Hi,
In the last three days, I lost hundreds of treatments. The photos from my folder disapeared with no reason.
I have to import them again (they are on the hard drive) and work again on treatments !!!! I just lost a lot of time for nothing.
I am using LR for years and it is the first time that it happens.
Do you have any ideas how I can solve that ?
Thanks all for your help !!!
Vincent

Ecole autour du monde,
Normally, LR does not loose edits. Nor does it loose photos. In the past when someone on this forum complained of "lost" things in LR the cause has always been that something was done - mostly outside of LR. In your initial post you wrote: "In the last three days, I lost hundreds of treatments."
I am confident that the cause for this is not some strange behaviour in LR, but something that you did - although inadvertently.
Apart from the possibilities discussed so far there are the following possible causes:
a) In the Library Module if <Reset all> has been selected.
b) In the Library Module or in the Develop Module if the Preset <General Zeroed> has been selected.
c) If you are running Windows XP (I haven't checked that in Win 7 yet) and you do a <Restore>, your catalog will also be set back to the time of the Restore Point unless the catalog resides on a different physical drive than the OS, and Restore has been disabled for this drive.
WW

"Wireless association failed due to unknown reason"

I am running Vista home (manufacture installed on new laptop) and am trying to connect to internet through new router WRT150N. The network is created fine (my other laptop can access it) excellent signal etc, but I keep getting the message "Wireless association failed due to unknown reason". I have tried every different security setting including no security at all and still cannot connect. I am, however, able to connect to the router with a wired connection. I would prefer to not have to chuck this thing out the window but it is becoming increasingly likely.
Thanks for your help.

hi there;
considering the scenario you've got on your network, that there are other wireless pc connecting to the router, then there is nothing wrong with the router itself. all the settings on it maybe correct. just to isolate the problem try to contact microsoft so as to clarify with them on securities and wireless settings of the vista laptop you've got there, so as you won't get frustrated thinking about your immediate problem.
i have a friend who uses the same brand and model # as yourself, and he does not have any issues with his win vista connecting to the router.
give microsoft a call, just to clarify things.
thanks.

Unknown reason for error code 36331 in DAC run

Hi,
While running full load i am getting following error
Can any one give me the solution
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_123 -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 01:41:19.126 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

HI Srini,
I had copied Src files from BIApps to informatica Src file
While running DAC11g full load, we are en counting some issues below is the error we are facing
ERROR CODE - Unknown reason for error code 36331
one more thing to consider, In DAC10g we give /Oracle/OBIAPPS/Informatica/9.1.0/server/infa_shared/SrcFiles as Informatica parameter path in DAC system properties but in DAC11g if i take same path no task is running, it is failing at first task only and no parameter file is generating.
But if i give dafault in that Informatica parameter path of DAC11g some tasks are running success and i am able to see some parameters generated in DAC PATH, but Default is taking
/Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters path for that location.
Informatica Server details are Success, Physical Data sorce are success.
I had copied SrcFiles and LkpFiles to informatica from BIApps.
ParameterDW and parameterOLTP are moved to /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters as well as Informatica Src folder
for one task below is the error
2013-02-07 21:50:17.515 Acquiring Resources
2013-02-07 21:50:17.517 Acquired Resources
2013-02-07 21:50:17.519 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has started.
ANOMALY INFO::: Error while executing : INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL)
MESSAGE:::
Irrecoverable Error
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
Status Desc : Failed
WorkFlowMessage :
Error Message : Unknown reason for error code 36331
ErrorCode : 36331
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.IrrecoverableException
com.siebel.analytics.etl.etltask.InformaticaTask.doExecute(InformaticaTask.java:254)
com.siebel.analytics.etl.etltask.GenericTaskImpl.doExecuteWithRetries(GenericTaskImpl.java:477)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:372)
com.siebel.analytics.etl.etltask.GenericTaskImpl.execute(GenericTaskImpl.java:253)
com.siebel.analytics.etl.etltask.GenericTaskImpl.run(GenericTaskImpl.java:655)
com.siebel.analytics.etl.taskmanager.XCallable.call(XCallable.java:63)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
java.util.concurrent.FutureTask.run(FutureTask.java:138)
java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
java.lang.Thread.run(Thread.java:662)
(Number of retries : 1)
pmcmd startworkflow -sv INFOIS -d Domain_oracle.ebiz.com -u Administrator -p **** -f SDE_ORAR1213_Adaptor -paramfile /Oracle/OBIAPPS/DAC/orahome/11g/dac/Informatica/parameters/SDE_ORAR1213_Adaptor.SDE_ORA_GLJournals_Full.ORA_R1213.txt SDE_ORA_GLJournals_Full
2013-02-07 21:50:46.989 INFORMATICA TASK:SDE_ORAR1213_Adaptor:SDE_ORA_GLJournals_Full:1:(Source : FULL Target : FULL) has finished execution with Failed status.

I lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

i lost my recovery partition for hp dv6 63300ee, with windows 7 home,, what can i do to back it?

Hi,
This assumes that Windows 7 was the original OS that your notebook came with.
If you created a set of Recovery Discs you can use these to reinstall the original OS - they will also re-create the Recovery Partition on the Hard Drive as well as reinstalling all your original software. Remember this is a destructive process, so back up any personal files etc that you wish to keep before reinstalling the Operating System.
If you don't have your original Recovery Discs, you can order a replacement set using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The partition on my T400s lost with unknown reason

Similar Messages

Maybe you are looking for