The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.
Hi,
When I am importing csv file system is showing me the following error:
[Admin-ProcessPartition]The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.
I checked my OLAP database. Partition with id = FAC2CRDN exists.
Please help me to come our from this issue and Thanks.
Regards,
Stanislav
I would suggest you the following steps in order to see if your problem is fixed or if you still have some errors:
1) full optimize your application
2) try to full process the OLAP database directly from the Analysis Services management console.
Regards,
Simmaco
Similar Messages
-
The Cube with ID = Rate doesn't exist in the collection Error Message
When doing a Full Optimization in the Rate cube I get a "The Cube with ID = Rate doesn't exist in the collection" error message. What is causing this error and how do I fix it?
I have seen this error when reporting services was not properly configured. can you connect to http://servername/reports ?
If not try to fix reporting services first, this solved the problem for me in the past.
But usually in this case all the aplications are giving this error when modifying. Is this also the case in your appset?
Does Apshell work when you modify the application there?
-Joost -
The 'Cube' with 'ID' = 'Capex' doen't exist in the Collection
Dear All,
When I am processing all the dimension at that time system is showing me the following error;
The 'Cube' with 'ID' = 'Capex' doen't exist in the Collection
Please help me to come our from this issue and Thanks
Regards,
SANJYDear All,
Thanks for your support,
One thing I need to tell you is that, I have resore the current appset in another server. As informed by you I have run the Modify Applicaion . When I have run the same, System has generated another error named;
"Object reference not set to an instance of an Object"
Regards
SANJAY -
The property with ID SI_LOGON_INFO does not exist in the object
Hi Experts,
I am writing a Java code which upload rpt report to an infoview and try to set username/password and user prompt false together.
I uploaded rpt success, however, after I add IReportLogon to add user/password. I got an error.
The property with ID SI_LOGON_INFO does not exist in the object
Code here, any suggestion is appreciated.
IPluginMgr boIPluginMgr = infoStore.getPluginMgr();
IPluginInfo boReportPlugin = boIPluginMgr.getPluginInfo("CrystalEnterprise.Report");
IInfoObjects boInfoObjects = infoStore.newInfoObjectCollection();
boInfoObjects.add(boReportPlugin);
IInfoObject boReportObject = (IInfoObject) boInfoObjects.get(0);
String boReportName = getName(filePath);
boReportObject.setTitle(boReportName);
boReportObject.setDescription(filePath);
boReportObject.getFiles().addFile(filePath);
boReportObject.properties().setProperty(CePropertyID.SI_PARENTID, folderID);
IReport Report = (IReport)boReportObject;
IReportLogon rptLogon = (IReportLogon) Report.getReportLogons().get(0);
//get error after try to retrieve rptLogon Class.
rptLogon.setPromptOnDemandViewing(false);
rptLogon.setUserName("fortest");
rptLogon.setPassword("whatever");
infoStore.commit (boInfoObjects);Hi Adam,
Thanks for your reply.
I added this refreshProperties() method before, but after run this method, the application will no response even wait for over 2 minutes.
Do you know why?
or shall I wait for long time to resolve this issue? -
The property with ID SI_DELTA_METAINFO does not exist in the object
Hi ,
when i moved crystal reprts from our Crystal server to the new BOBJ (BOExi3.1) Server and on DB configuration for all the reports i used the DB defaults that comes with the Report.
Problem when i try to run locally or run from the enterprise login it works perfect, but when i try to run the report from the Infoview it says Database Information is either Incorrect or Incomplete.
and also when i goto report and change the DB configuration it throws this error as
"The property with ID SI_DELTA_METAINFO does not exist in the object".
Please throw some light on the above error as i need to make it available for our end-users ASAP.
regards,
Sethu.Hi Seth,
I looks like you have a configuration issue in BOE so I moved your post to the Admin forum.
You also likely have a support Contract so I suggest you create a case in Service Market Place to immediate assistance. This is a public forum that may or may not be monitored by SAP Support Rep's, depending on the case load.
Thank you
Don -
The property with ID SI_FILES does not exist in the object
Hi,
We are accessing the BO reports through front End web application using WEBI. We are using BO Java SDK on the application for this purpose.
Some of our users (APAC region) has started getting the error while accessing the reports from web application. Here are the error:
com.crystaldecisions.sdk.exception.SDKException$PropertyNotFound: The property with ID SI_FILES does not exist in the object [24/01/12 13:27:39:402 GMT] 000000b6 SystemErr R at com.crystaldecisions.sdk.occa.infostore.internal.ag.getFiles(Unknown Source)
[24/01/12 13:27:39:402 GMT] 000000b6 SystemErr R at com.crystaldecisions.sdk.occa.infostore.internal.AbstractSendableObject.getFiles(Unknown Source)
Same report when accessed by the users from AMER or EMEA region, it is working fine. Can anyone help me what is the issue and how to resolve it?
Thanks,
Ashokwhat version of Enterprise is this? XI 3.1, Bi 4.0? Also what version pack are you running. I am asusming that APJ and EMEA\AMER users try to hit the same web\app server\ BOE, same application and access same reports. What kind of authentication you use? Given everything else is same it's got to be security issue? Does APJ users are part of a different group in your 3rd party auth server such as LDAP or AD?
Edited by: Aasavari Bhave on Jan 25, 2012 2:55 PM -
I've got a new MacBook Pro Retina from october 2013 13" (8 gb Ram and 256 gb SSD).
I had the "freezing" issue that was solved with the firmware EDI update.
But after this update i have now another problem: often during web browsing the scroll with 2 fingers up and down the page stops working (but the trackpad is ok for everything else and if i go in other programs the scroll works as usual). The only solution is to restart the browser but the problem happens again and again.
Both on Chrome and Safari. Especially on Safari everything freeze if i try to scroll on the right to go back to the previous page.
Does anybody else have this issue?macmattia wrote:
I've got a new MacBook Pro Retina from october 2013
Does anybody else have this issue?
Doesn't matter if anybody else has this issue.
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. -
The Dimension with ID ... doesn't exist in the collection
BPC 7.5 SP3, MS SQL 2005
I am processing an applicaiton using the Admin console. Choosing "Modify Application", checking the "Process Application" checkbox and clicking "Modify Application" to rebuild the app. The result is successful completion with an error on the details portion of the display under "Modify Fact Table" that lists and exception in the Log. The log in the management console shows the error
Microsoft.AnalysisServices.ItemNotFoundException: The "Dimension" with "ID" = PROFITCENTER doesn't exist in the collection.
The ProfitCenter dimension is one of the application's dimensions.
I can process the ProfitCenter dimension and process this application as part of the dimension processing and it is successful.
I can optimize this application and it is successful.
The application appears to be working properly.
I can open the cube in SQL Server Analysis Services and I can see the ProfitCenter dimension and browse its members. I can open the application cube and browse it.
I checked the profitcenter dimension member table and compared it to the fact tables and all the facts are base level members that are not calculated members.
Has anyone seen this error? Is this just a spurious message I can ignore or is there something really wrong?We were able to solve this issue today. We turned off Insight and reprocessed the application. The error did not appear. I hope this works for you too.
-
I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?
Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18 -
'ServerProperty' with 'Name' = 'Language' does not exist in the collection
LS,
One of my customers (using ssas 2012) is facing collation issues which result in missing facts in the cubes. I suggested them to have a look at the Analysis Server Properties. Howevere, on selection of the Analysis Services Properties page 'Language-Collation',
it doesn't open the page showing the properties, but instead the following message pops up:
'ServerProperty' with 'Name' = 'Language' does not exist in the collection
Any ideas on what could have caused this and how it can be fixed ?
We're considereing a restart of the SSAS server, but need to be very carefull because it's their production environment.
Appreciate your help,
Kind regards,
Cees
Please remember to mark replies as answers or at least vote helpfull if they help and unmark them if they provide no help.I am also experiencing this error when clicking on the Language/Collation page of the Analysis Services Properties dialog.
I suspect this is causing some other strange behavior such as an "invalid characters in hierarchy names" error when deploying an SSAS database, when the same solution/project can be deployed successfully from other machines. In that case, there are parenthesis
in the attribute name but no user-defined hierarchies. Error:
Errors in the metadata manager. The name, 'Project ID (Description)', for the cube hierarchy is not valid because this name is a reserved word, contains one or more invalid characters (.,;'`:/\*|?"&%$!+=()[]{}<>), or is longer than 100 characters.
I would like to avoid having to re-install SSAS if at all possible. Any help is much appreciated.
LB -
Excise invoice doesn't exist in the supplying plant. Message no. 4F281
Hi Gurus,
I am doing STO from Excisable depot to Excisable depot as
1. Create PO at Receiving Depot
2. Create Delivery through VL10B
3. Issuing Material through VL02N
4. Create Excise Invoice through J1IJ
5. Do Goods Receipt at receiving depot.----here I am unable to capture the invoice
I am getting error as" Excise invoice doesn't exist in the supplying plant. Message no. 4F281"
When i try to capture J1ig with supplying plant excise number , the excise value is not flowing and it is showing "0" duty values.
Any plant level setting is missing,
Searched in the forum but not got any solution..
Please let me know how to solve this issue.
Thanks,
Muru..Hi,
Sorry, I misunderstood it as plant to depot STO. Please ignore my previous comment.
Please ensure that the excise invoice is posted in the supplying plant. Refer the similar thread: STO from Excisable Depot to Excisable Depot
Regards,
AKPT -
Revision: 21277
Revision: 21277
Author: [email protected]
Date: 2011-05-18 11:35:28 -0700 (Wed, 18 May 2011)
Log Message:
Added ds-console source to package-oem and removed copy command for datavisualization.swc which doesn't exist in the specified location. I do not find it in the most recent package-oem.zip neither
Modified Paths:
blazeds/trunk/build.xmlGusar wrote:No, it's not. I have actually seen cases where software rendering gave a higher glxgears score than hardware rendering (and no, it wasn't about vsync). Of course, with *actual* apps on the same machine, software rendering sucked compared to hardware rendering.
Please do not jump to conclusions and make assumptions here like 'when will people finally get it??'. I never said it was a benchmark. I have also seen many examples of where it's results do not go with conventional performance. I have a Radeon 9000 that goes faster on glxgears than a Geforce FX 5600 running Nouveau. Which is the faster card? The FX by miles. It is not a benchmark as it can not be compared between configurations. What I know is that on this individual system, from prior experience over many years when 3D acceleration is working glxgears gets between 300 and 400 fps. When it is not working it gets less than 10. That is a fact but does not mean it is benchmarkable. Yes, a Quake 3 timedemo (I have these numbers too and they very much correlate to glxgears performance for this system given just how slow it is) would be a benchmark but when it runs less than 0.1fps and even the 2D rendering means that navigating the menu is impossible, there just isn't the time to find out. Hence if playing around with drivers on this system I would use glxgears to check that 3D acceleration is working but not to benchmark. Glxinfo does not give you all this evidence.
But to clarify, I wouldn't use glxgears as a benchmark, benchmarking is different and I do a lot of that too. -
Business System doesn't exist in the SLD
Hi,
Im trying to import XI content into the Integration directory. when i logged into Integration directory I clicked <i>Tools -> Import Configuration Objects</i>.
Im getting a dialog window saying "Business System <Business system name> doesn't exist in the SLD.
but when i gave t-code SLDCHECK in the PI system, i could see that business system as maintained in the SLD.
also i could successfully import the XI content for Integration Repository.
Any suggestion is highly appreciated
Thanks
SouravHi ,
we have done a migration from AAIX to HPUX. I have performed some post installation steps as part of this.
As partof this i have followed the post installation steps for PI usage type. I have changed some com.sap.aii parameters to reflect to the current target systems.
also *** a part of this i refreshed the CPAcache b giving the follwing URL http://<host>:<Java-Port>/CPACache/refresh?mode=full with login id as PIDIRUSER and password. but its gving something like below...
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'http://sapdxh:54000/CPACache/refresh?mode=full'. Line...
CPA cache refresh (mode=full) successfully executed in 62009 milliseconds.
^
so is this causing the problem or are there any connection parameters in XI profile to be looked at more spsecifically ??
please suggest as im not able to find out this error and its on high priority to solve.
Thanks
Sourav -
I am unable to restore my subscription. I receive the following error message when I enter the password: " Apple ID doesn't exists or the password is wrong".
Please refer to Can't authorize with a previously used Adobe ID
-
"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application
"Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application. what should i do? help me.. =(
hopefully i can running my photoshop cs4 on Rosetta coz some plugin need rosetta to work. thanks..xvolution_lp wrote:
macbook aluminium unibody mac snow leopard 10.6.4. i've already installed rosetta in my mac. i think this problem happen caused other software (CleanmyMac) . i've run the app and i think the app(cleanmymac) remove the universal binaries. what shoul i do?…
I'll assume that's a Mac-Intel machine, as I'm not familiar with macbooks or laptops in general. Obviously, if it were a PPC you would not need Rosetta in the first place.
Well, here's what I would do:
I'd re-install CS4 in the hopes that will solve the problem;
Second, I'd stop listening (and probably even speaking) to the misguided soul who recommended CleanmyMac to me;
Third, delete all traces of CleanmyMac; and
Fourth, I'd reinstall the OS and all applications on my machine.
But that's just me.
Wo Tai Lao Le
我太老了
Maybe you are looking for
-
I know its an issue with the computer because when I messed with Appearance settings in System Preferences, the tv picture changed. thanks CB
-
Canvas view shows only blank cavas
When I went to re-open a file I was working on during my last session, I am now unable to view any of the the objects in the "editing" view of Xcelsius. The canvas is completely blank (basic blue background, no grid showing). However, when I go to p
-
Need DVD disk root window to show a background picture. How?
Please forgive me.. but I've searched for an answer and can't seem to find one. I created a DVD for a town to be used in DVD players. I also included on the DVD an Extras folder that has a web site and pdf's. What I want to do to polish it off is to
-
I need help with my WRT54GS router.
My WRT54GS linksys router is acting up pretty bad. For example, i am just surfing the web and i have a program Ventrilo going talking to some friends, then all of a sudden i get disconnected from it and my internet just suddenly halts and then reconn
-
I didnt receive a text message from Ovi Store mod...
for selecting the link in the message.