The partner transaction manager has disabled its support for remote/network transactions....When inserting during trigger in linked server

Hi All,
I am getting below error while inserting into Linked Server (sql2012) thru trigger from sql2008 ....However if i insert the same thru Store Procedure it is inserting successfully....MSDTC service is started on both sql server machines....also both machines
rebooted....but still i am facing this error.
OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" returned message "The partner transaction manager has disabled its support for remote/network transactions.".
Msg 7391, Level 16, State 2, Procedure ins_test, Line 11
The operation could not be performed because OLE DB provider "SQLNCLI" for linked server "XXX.XXX.XXX.XX" was unable to begin a distributed transaction.
Could assist to resolve.
Regards
Shehzad

Hi SHzKhan,
According to your error message, we need to verify if you configure the MSDTC correctly, When you have more than one SQL Server involved in a Distributed Transaction, you need to make some changes to the default configuration of MSDTC for these distributed
transactions to succeed. There is a detail about recommending MSDTC settings for using Distributed Transactions in SQL Server, you can review the following article.
http://support.microsoft.com/kb/2027550/en-us
There is a similar issue about error 7391, you can refer to the following link.
http://dba.stackexchange.com/questions/30235/msg-7391-distributed-transactions-dtc-on-sql-server
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Similar Messages

Adobe Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows The Akamai Download Manager has encountered an fatal error: File not found.

I am trying to download the trial of PSE 13 which consists of two files. The first downloads ok but on the second I get this message:
Downloading Adobe Photoshop Elements 13 MultipleLanguages Windows
The Akamai Download Manager has encountered an fatal error: File not found.
Same thing happens if I try to download the files individually and also in different browsers. Any ideas?

Me three. I have been trying for hours, and have used three different browsers.
I have just noticed that the URL it is trying to use is looking for ...win32.exe under a directory called win64. That sounds like a stupid typo mistake. I manually modified the URL to this instead (and it downloaded something)...
http://trials3.adobe.com/AdobeProducts/PSE/13/win32/PhotoshopElements_13_LS25_win32.exe
Now I just need to figure out how to install the product manually using the two downloaded files!?!

The Internal Concurrent Manager has encountered an error.

Routine &ROUTINE has attempted to start the internal concurrent manager. The ICM is already running. Contact you system administrator for further assistance.afpdlrq received an unsuccessful result from PL/SQL procedure or function FND_DCP.Request_Session_Lock.
Routine FND_DCP.REQUEST_SESSION_LOCK received a result code of 1 from the call to DBMS_LOCK.Request.
Possible DBMS_LOCK.Request resultCall to establish_icm failed
The Internal Concurrent Manager has encountered an error.
Review concurrent manager log file for more detailed information. : 06-JUN-2012 00:51:22 -
Shutting down Internal Concurrent Manager : 06-JUN-2012 00:51:22
List of errors encountered:
_ 1 _
Routine AFPCSQ encountered an ORACLE error. .
Review your error messages for the cause of the error. (=<POINTER>)
List of errors encountered:
_ 1 _
Routine AFPCAL received failure code while parsing or running your
concurrent program CPMGR
Review your concurrent request log file for more detailed information.
Make sure you are passing arguments in the correct format.
The PPD_0606@PPD internal concurrent manager has terminated with status 1 - giving up.
Edited by: sahil jain on Jun 6, 2012 10:10 PM

Hi;
1. What is EBS version?
2. Did you check:
Concurrent Managers Will Only Start on One Node in PCP/RAC Environment [ID 264296.1]
Concurrent Processing - The Concurrent Manager Fails to Start on GSM Enabled Due to DBMS_LOCK.Request ResultCall Failed to Establish ICM [ID 245563.1]
Regard
Helios

Why am I getting a "Adobe Creative Cloud Membership has reached its limit for hosted sites" message?

I just tried to push my FIRST "free" Creative Cloud site live and got the message "Your Adobe Creative Cloud Membership has reached its limit for hosted sites. To push this site live you will need to purchase an additional hosting plan." I thought CC membership was supposed to give you 5 free hosted web basics sites?
I am a premium BC partner and so far have my partner site and a paid Webcommerce site . In addition to the site I'm trying to put live I have 2 other trial sites (think they are designated as WebMarketing sites) of which one is expired. So where does the limit come in as this is so far my only WebBasics site?
Please help as I need this live urgently (without additional expense).

Hi Judy
Appologies for this un-answered post, if any related issue is still active please reach out to our support directly.

Creative Cloud Membership has reached its limit for hosted sites

I have had a paid Adobe Muse Creative Cloud membership for about 2 years now, and only used one website. I understand I can host up to 5. But for some reason when I try to launch a new site, I am told my membership has reached its limit for hosted sites. Can someone please tell me if I have some test pages I'm hosting (or something) and how I can erase them so I can make room for my new site. These are only personal sites so I do not need a business catalyst url for testing. I have the two domains active now and just need to be able to have both go live.
My email is [email protected]
The web page I'm trying to launch is www.ninetiesband.com. The only site that should be active right now is www.wearenightsbridge.com.
Thank you for any help you can provide.
-Mickey

Hello Mickey,
I checked your subscription details, and it looks like you're subscribed to Adobe Muse single app subscription, and not Creative Cloud subscription. When you sign up for Muse single app subscription (yearly), you get one free site to host with Business Catalyst. You only get 5 sites when you have a full Creative cloud subscription.
Cheers
Parikshit

I bought the Tiger woods 12 game for my ipad and also paid the 19.99 for the $2M. It has crashed my ipad a few times and when it restarted last time, it had no history of my progress or the $2M. How do I get my history back

I bought the Tiger woods 12 game for my ipad and also paid the 19.99 for the $2M. It has crashed my ipad a few times and when it restarted last time, it had no history of my progress or the $2M. How do I get my history back or my money back for the game and the in-game expenses?

The only one that can issue a PUK code is a carrier, which you've already made clear you don't have.
If itunes does not recognise your ipad that may be another issue. What version OS is on your computer and what steps did you follow to uninstall itunes and then reiinstall itunes on your computer?
And, do you at least see the sidebar on the left hand side of itunes?
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
Do you have another computer you can try?

Cloud Membership has reached its limit for hosted sites.

I have a full subscriptin to the cloud but when I try to push my new Muse site live Iget the following error: "Your Adobe Creative Cloud Membership has reached its limit for hosted sites." After much research I have kind of figured out that when I upgraded my trial version of Muse only to a paid version of the Adobe Cloud, the system may think I am still a trial member. I sent in a ticket but three says later it's still not fixed. Anyone one else had this issue?

I have only ever used one email address. [email protected] I'm not sure why it would should that I have even used one site since I have never published a website live. I have only played around with 3 different sites... all of which should still be temporary. The site I am trying to push live right now is outsidetheveil.com.

Page slow - Disabled grid support for display point

The page loads slowly and it shows the following debug entries "Disabled grid support for display point".
There is as well global page 0's regions in the page.
I can't figure out which page regions/items are our exceeding the grid.
The show-grid on the page shows green grid, but hmm. cant figure out the amount of grids.
1. Where to look for this grid + items problem in the Page Designer?
Application Express 5.0.0.00.31
Oracle Database 12c Enterprise Edition Release 12.1.0.1.0 - 64bit Production
Theme 25, subscribed from Apex5 repository
Upgraded application from 4.2
Two Level Tabs - Left Sidebar
Elapsed
Execution
Message
Level
0.13712
5.94805
Disabled grid support for display point BODY because there are no more grid columns available!
2
6.08515
6.19260
Disabled grid support for display point BODY because there are no more grid columns available!
2
12.27775
Page contains page items/buttons which are not assigned to a region!
2
Rgrds Paavo

Hi, found inefficient sql and by using Tuning Advisor I was able to tune them, so now it renders faster.
When looking the LEVEL9 debugs there are still those rows with
0.40106
0.00180
Disabled grid support for display point BODY because there are no more grid columns available!
and
0.56902
0.00003
Page contains page items/buttons which are not assigned to a region!
0.56906
0.00010
......Render page items and buttons
0.56916
0.00038
...No grid layout necessary, because
everything is displayed in first column
So the question are those messages 'harmless' and can I leave the page as it is or should I try to find what is leaking on the page?
What is the consequence of Disabling grid support - messed page on certain browser?
Is there method to show how many GRID's there are (12 ?) and which page item is in which grid.
Rgrds Paavo

CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product

I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!

We only support ESXi
Sent from Cisco Technical Support iPad App

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

Is anyone having problems with the battery heating up and draining the power? Mine has been doing this for about 2 months now.

This is a major problem with Lollipop, but yo said it started 2 months ago. Several people have fixed problem by removing FaceBook And Face book messenger and then re loading the apps again. You might want to clear your cache before reloading. Not sure this is your problem, but worth a try. Good Luck

HT4356 I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

I am trying to print wirelessly from my ipad to an epson stylus SX438W. The connection appears fine on both devices but the ipad cannot connect to the printer. It has been working fine for the past 4 months. Can anyone help?

Have you tried restarting the printer? Reboot the iPad as well.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

The DataSource ZGLOBAL_SPND still has no target system for the delta update

Dear Experts,
I have created a Generic Datasource, while checking records in rsa3 iam getting below error.
Error: The DataSource ZGLOBAL_SPND still has no target system for the delta update.
Source system is already created.
For some of the datasources iam getting this msg.
regards
KV

Hi,
Fisrst did u enabled the Delta for Generic.If yes, the in RSA3 select Update Mode as "D" then provide the BI Trget system and execute.
If you correct Target system and update mode D then it should fetch Delta records only...If not please write to SAP about this issue.
Regards
Ram.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC has been turned on (PC is connected via Ethernet cable, and has no wireless capability as far as I know). What gives? It works fine when the PC is off.

Out of the blue, my ITouch is unable to access my wireless network ONLY when my PC is on (the PC is connected via Ethernet cable, and has no wireless capabilities that I know of). What gives? When the PC is turned off, everything is totally fine. I\m stumped.

Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
I suspect a problem with your router. Try changing the security. First use no security as a test.
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Hi my daughter did some changes in the settings,now i am getting voice support for every task i do,i am not able to access anything cause unable to toggle down to the reset option,pls help as to what to do

hi my daughter did some changes in the setting,now i am getting voice support for every task i am doing,plus cannot toggle between the pages,unable to do the changes as not able to toggle to reset option either,pls help.

You probably have the Voiceover accessibility feature turned on. It's difficult to navigate as you need to use specific voiceover gestures. The easirest thing to do is connect the phone to iTunes. Select the Summary pane and click the "Configure Universal Access..." button. In the window that opens,select "Neither" in the seeing options and click "OK".

Support for safety camera locations when using off...

I've seen people manually post the file (as text) that you can put in the relevant folder on your phone's data card - but is there any ongoing support for safety camera updates when using your phone's mapping / sat nav offline (ie no data usage)?

Jaff0 wrote:
Doesn't seem like there's any option through the PC map loader program, so the only option seems to be if anybody has posted the file - which may not always happen?
Safetyspots are not updated that often and I am sure someone on the forum would try to help you out if you asked.
Happy to have helped forum with a Support Ratio = 42.5

The partner transaction manager has disabled its support for remote/network transactions....When inserting during trigger in linked server

Similar Messages

Maybe you are looking for