The PC Suite is not connecting with bluetooth.
Neither PC Suite nor Ovi Suite identifies the bluetooth module on my laptop. The bluetooth module that I have is Motorola v2.1 EDR, and the OS installed is Windows 7 32 bit.
My bluetooth module works fine. Windows is able to communicate to my mobile over bluetooth. I can browse my 5800XM phone on windows explorer via bluetooth without problem.
Whereas
In PC Suite, if I try to get connected via bluetooth, I get the following error message "Cannot use the connection type. Check that all the needed hardware, software and drivers are available."
In Ovi Suite, I will get Bluetooth option disabled.I have tried all the setting of the bluetooth device. I tried enabling bluetooth serial port also. But it didn't help. I have tried enalbling the Bluetooth network adapter also. But no help.
Hi as per supported Bt list your driver is not supported by Nokia. I am not sure this could be the problem.
BLUETOOTH SOFTWARE SUPPORTS
Windows 7 or Windows Vista 32-bit and 64-bit editions:
Microsoft Windows Bluetooth stack
WIDCOMM Bluetooth stack, driver version 6.x
Toshiba Bluetooth stack, driver version 5.10.12, 6.10.10, 6.30.01 and 7.00
IVT BlueSoleil Bluetooth stack, driver version 5.0.5, 6.2.227.11, and 6.4.245.0
Windows XP 64-bit:
Microsoft Windows Bluetooth stack
Toshiba Bluetooth stack, driver version 5.10.12, 6.10.10, and 7.00
IVT BlueSoleil Bluetooth stack, driver version 5.0.5 and 6.2.227.11
Windows XP:
Microsoft Windows Bluetooth (only in Service Pack 2)
WIDCOMM Bluetooth stack, driver version 1.4.2.18, 3.x, 4.x, 5.0, 5.1, and 5.5
Toshiba Bluetooth stack, driver version 4 .0, 5.0, 5.10.12, 6.10.10, 6.30.01, and 7.00
IVT BlueSoleil Bluetooth stack, driver version 3.x, 5.0.5, 6.2.227.11, and 6.4.245.0
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You
Similar Messages
-
The MOF Compiler could not connect with the WMI server
I am trying to add node2 to SQL cluster (2008) However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such as the failure of the WMI Server to start".
I checked on the WMI services, they are started and running.renamed the WMI repository. but nothing worked .
Any idea what settings I need to change in order to ensure a successful instalation and add node 2 to sql cluster.Hi,
Did SQL Server failed during installation and you somehow brought services online. Or it failed and next time you executed it succeeded IMO this error pops up because of remnants of failed installation on Node 1. With cluster specially if Installation on
node 1 fails you should uninstall completely and remove all files related to SQL Server and then proceed.
Have a look at below connect,see workaround and information posted by MS
https://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server
If above still not helps please post complete setup log file
%Program files%\Microsoft sql server\100\Setup bootstrap\Log\ folder.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
iPod updates 2 touch with the new software, and from the update they are not connected with Time phase. They appear calling but never they enter the calls. I make calls with other users and if one connects but in these two not from the update
I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
DU needs to be reading the packages on the HD, not the (now out of date) install disc.
The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set). -
SQL 2012 installation Error-The MOF compiler could not connect with the WMI server
Hi all,
I am getting below error while installing SQL 2012 Dev edition in Win 8.1 Pro.
I am facing lot of issues while installing SQL 2012 in Win 8.1 Pro.Any other steps we need to take to install SQL 2012 in Win 8.1.
Thanks in advance.Installation:
Installation for SQL Server 2012
Hardware and Software Requirements for Installing SQL Server 2012
Installing the .NET Framework 3.5 on Windows 8 or 8.1
About "The MOF compiler could not connected with the WMI server" error message:
Please, verify the Windows Management Instrumentation has status "started" and is set with Startup Type "Automatic". (Alberto Morillo, SQLCoffee.com).
José Diz Belo Horizonte, MG - Brasil -
9630 does not connect with Bluetooth Car Kit Speakerphone
Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed. I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result. To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases. I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it. My carrier is Sprint, and OS version is 4.2.0.285.
The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
Go to: www.blackberry.com/update and then follow the prompts to update your device software.
This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
Once the update is done, test the Bluetooth connection.
Hope this helps. -
HT204368 iphone5 bluetooth not connecting with bluetooth device
Hi
I am haveing problem to connect my bluetooth device with my iphone5.Supported Bluetooth Profiles > http://support.apple.com/kb/HT3647
-
Nokia suite does not connect with my 6300
Could anyone help please, the problem is straight forward, there is a padlock beside my phones name.
Could it be something i am not doing on the phone side?Problem solved.
Solution:
My antivirus was configured to scan SSL protocol but it's root certificate has expired.
In my case just an AV update solved. If it is not possible for you, you can possibly put https://account.nokia.com/ in something like an "exclusion list" in your AV or FW. -
I am trying to install SQL Server 2008 in my local machine. However, I kept running into errors with the following error message:
"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?"The MOF Compiler could not connect with the WMI Server. This is either because of a semantic error such as an incompatibility with the existing WMI repository or an actual error such
as the failure of the WMI Server to start".
I also ran "rundll32 wbemupgd, UpgradeRepository" to rebuild WMI repository, it doesn't help either. I got the same error message.
Any ideas what settings I need to change in order to ensure a successful installation of SQL Server 2008?
can you check below two links.Make sure previous failed installation is removed completely.
http://connect.microsoft.com/SQLServer/feedback/details/356258/the-mof-compiler-could-not-connect-with-the-wmi-server#
Solution given by Connect MS is:
Possibly the issue was caused by uninstalling from add-remove programs - at any rate, using aaron bertrand's suggestion below fixed the issue. Also of note - I used the local admin for the install.
http://sqlblog.com/blogs/aaron_bertrand/archive/2009/02/20/the-xp-sp3-msxml6-sp2-sql-server-debacle.aspx
yes - remove msxml6 and any other half installed portion of sql 2008 and REBOOT and install sql
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Nokia 5230 does not connect with USB
When I plug the cable in my phone and notebook, the phone asks me to select the connection type. I select PC Suite. I have downloaded the latest version, but PC Suite does not connect with my phone.
I use Windows XP Home Edition SP2
I don't have a clue about the cable type, but it fits.
There is no SD card in it
Does anyone have a solution to this problem?In that case, uninstall all Nokia related software and drivers with Revo, clean the registry with Ccleaner. Reinstall the latest PC Suite, turn off antivirus during install. Reboot the PC. Start PC Suite and then connect the phone in PC Suite mode.
http://www.revouninstaller.com/revo_uninstaller_free_download.html
http://www.filehippo.com/download_ccleaner/
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
After installed iOS7 I am facing the following two problems:
1. WIFI as well as mobile data connection are working fine at my home. But, not connecting with any other outside WIFI networks. Error message is 'unable to join network'. Mobile data also not connected outside my home. Sometimes wifi and mobile data connect outside my home when I turn off and on the phone.
2. Bluetooth, in my car, paires well and incoming and out going calls can be received and made. The problem is no sound out put from speakers.
Apple please make note of the above problems (of million people) and give solution before giving any other updations for painting and tinkering the screens.Check this thread, the same solution might work for you:
http://discussions.nokia.com/t5/Nseries-and-Symbian-Smartphones/N8-111-040-1511-Wifi-and-mobiledata-... -
I'm an active subscriber for creative cloud photography plan. However, I can not connect with lightroom mobile. On my desktop app or on iPad app I get the message ˜trial expired˜. Please, what is going on? Thanks for the help.
Does your Cloud subscription properly show on your account page?
If you have more than one email, are you sure you are using the correct Adobe ID?
https://www.adobe.com/account.html for subscriptions on your Adobe page
If yes
Some general information for a Cloud subscription
Cloud programs do not use serial numbers... you log in to your paid Cloud account to download & install & activate... you MAY need to log out of the Cloud and restart your computer and log back in to the Cloud for things to work
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
-ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp
-http://helpx.adobe.com/creative-cloud/kb/license-this-software.html
If no
This is an open forum, not Adobe support... you need Adobe staff to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
Iphone 4S bluetooth does not connect with any other Bluetooth
Iphone 4S bluetooth does not connect with MacBookPro Bluetooth or any other Phone with Bluetooth. Can someone please help !!!
Hi There!
I am having the same problem, my brothers samsung picks up every bluetooth device thats remotely close but the 4s just sits there searching while sitting on the same desk as my iPad2, iMac 24" and headset that worked fine on my old 3 g.
I am not hugely tek savvy, can anyone explain in easy speak (the kid at the local apple reseeler told me the new bluetooth used on the 4s is not compatible with the older bluetooth devices.... hmmmmmm)
There must be a solution..... Thanks in advance -
Hi, my MacBook Air is not working anymore if it's not connected with the power cable. It's pretty new so I can't imagine that the battery is dead already. Why can't I use my MacBook Air without the power cable even though I charged it for hours?
Please take the Mac to Apple store to have it checked out.
Genius Bar reservation
http://www.apple.com/retail/geniusbar/
Best. -
My ipod recenly froze with the last update. bestbuy gave me a replacement. the new one will not connect to the computer or itunes. i followed all the instructions and - nothing. It's frustrating enough as i lost all my notes and work, but now I can't connect to sync with itunes. i don't get it. i'm not a supertech so i don't know what to do. help!!!!!!
Thanks, Bob! You are correct. And, we learned this as we spoke with APPLE TECH SUPPORT by phone on Christmas day (800-APL-CARE). One of their reps spent the time to help us troubleshoot this, but the boiled down conclusion is your answer, and to repeat for the benefit of others, here is what worked:
1. With our Belkin router set to "out-of-the-box" WEP 64 bit security, we could not get wireless access of any kind. Only with the Security Mode set to DISABLED, could we gain access.
2. Changing the router's security mode setting to "WPA/WPA-2...." and entering a new min. 8 char passphrase, and then entering that same passphrase into the IPOD Touch, and restarting the router, did the trick!
Based on this, and some info found in another posting, I can only conclude that the IPODs and IPHONES do not support WEP security mode in many generic routers used by thousands of consumers. Hopefully, those same consumers can figure out how to change their wireless router setttings to WPA/WPA-2 security mode and ALSO get all their other wireless devices (PCs, laptops, WII boxes, ROKU boxes) all reconfigured to WPA mode, too.
I THINK THE BOTTOM LINE HERE IS THAT THERE IS AN ISSUE THAT APPLE NEEDS TO ADDRESS WITH WEP COMPATIBILITY and it may also be the case that MOST CONSUMERS ARE USING WEP 64 BIT security on their home wireless routers?
In any case, it's working now, so anyone who is having problems should try changing to WPA mode and post back here if it worked for them! -
I recently updated my MacBook Pro to the new software, and now my iMessage and my FaceTime are not connected with my phone number like it is supposed to be. How do I get them to match so that I would be able to use my cellphone number on my notebook?
To reset any OS X program just go to the folder and trash the affected files.
Open a new Finder Window
Click "Go" in the above status bar
Click and HOLD the "option/alt" key and you will see "Library" now show in the above list
Click Library while still holding the option/alt key and a new window will open with all of your system files
Go to the preference file (NOT Preference Panes)
Locate a file named <com.apple.FaceTime.bag.plist>
Locate another file named <com.apple.FaceTime.plist>
Locate the file <com.apple.iMessage.bag.plist>
Drag the files to the trash
Delete the trash
Close FaceTime and iMessage if not already closed
Relaunch FaceTime and iMessage from Applications folder
This should reset the program back to default. You will have to put your information back into the program but it should work.
Good Luck.
Maybe you are looking for
-
Check Box for each row in report -- all rows deleting when pressing DELETE
Hello experts! I have set up a report with a check box for each row. When I click the DELETE button to delete the selected rows, every single one of the rows get deleted...even the ones that are not selected. I have my process point set to "On Submit
-
APO-DP - Change in Calculation Type of Key Figure in Production Environment
Hi Team, I wish to know how to make a change in Calculation Type of Key Figure in Production Environment. I wish to change calculation type from "P" to "S" and also wish to enter Disaggregated Key Figure. Regards, Tarun Jha
-
External HD issue. Finder cannot complete the operation because some data..
Last night I had a drive throw the error "finder cannot complete the operation because some data in "<file>" could not be read or written. Error code-36". I thought it was a bad disk. Then tonight I plugged in a flash drive, formatted it on the machi
-
Move my itunes account to an external drive
I need help to figure out how to move my itunes to my new external hard drive.
-
1. Product Name and Number HP Pavilion dv6 Notebook PC A5F76AV I have a display of 15.6" which supports 1366 X 768. I was recently browsing through HP website and found one dv6 notebook with the display 15.6" diagonal full HD anti-glare LED-backlit (