The pdf security is not working in Flash Paper

Is anyone facing a similar problem.
The pdf security if applied with a passsword to select the
text & graphics, printing, etc does not work. It selects any
and every text in flash paper and pdf. Does anyone know how can one
prevent to copy any text or graphics ...

I have the same issue. My phone says the files are corrupt and they stay corrupt if I forward then from my phone. It like the phone checks for something in the PDF, when it never did before.

Similar Messages

Flash Global Security & Links Not Working?

Hi all,
I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
Actionscript 3 on the Contact page looks like this:
import flash.events.MouseEvent;
//---Blog Button---\\
var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
function eClick(event:MouseEvent):void{
navigateToURL(getBlog, "_self");
//---Twitter Button---\\
var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
function eClick1(event:MouseEvent):void{
navigateToURL(getTwitter, "_self");
//---Flickr Button---\\
var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
function eClick2(event:MouseEvent):void{
navigateToURL(getFlickr, "_self");
//---Email Button---\\
var getMail: URLRequest = new URLRequest("mailto:[email protected]");
Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
function eClick3(event:MouseEvent):void{
navigateToURL(getMail, "_self");
I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

Thanks Samuel.Wong and Ned Murphy for the information.
I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
Maxx

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.

Then call AppleCare and talk to someone in account security.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.

I have a Excel file which has lots of PDFs embed as a link. When i converting to PDF the embed links are not working. Please help to slove this issue.e

I am also looking alternative way using inDesign to create the embed link as like as excel. is there any possible? Thanks for you reply

The download function is not working....!! When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads...

The download function is not working....!! I don't use any add-ons like idm or dap,etc.... When I click on something like download a doc,pdf or any such file, the firefox just doesn't respond, and when I checked the download, i.e. cntrl+j, I don't find anything in the downloads... I am currently using Firefox 7.0.1....... Nothing is being downloaded, and I am forced to use IE8 for everything... I even tried re-installing, but doesn't help... I am using Windows 7

TonyE is correct the plugin version comes with Adobe's Reader X.
The failure in communication is two parted:
1. Reader X is not Acrobat (Mozilla Plugin Checker)
2. Acrobat is not mentioned in the Reader X download Page (Adobe)
therefore confused clients.
For readers '''CAUTION''' check the minimum requirements for Reader X.
Here: [http://www.adobe.com/products/reader/tech-specs.html Adobe's Reader X requirements link]
Do not waste the time to download (80+MB and Site is Slow) if your machine does not have the resources to execute it. ie. '''aging''' Hardware
Unfortunately the Adobe DLM only checks the requirements after it has
downloaded BEFORE the install occurs.
This is '''very expensive''' for both the sender and receiver
It might be why they called it READER X and READER 9 will not sense an update...
Another Software company pushing Hardware antiquity...

I am trying to reinstall Flash CS4 professional as the action script is not working but now I am getting an error: 2 message when I use the original CD to try and reinstall

I can't get the original disk to work on a reinstall. I get the message
AdobeColorCommonSetRGB
Error:
Error 2.
I teach a class using this program on Macintosh computers running 10.9.5 and the action script is not working. It will work on any program designed using the 10.8 but if you design any animation on 10.9.5 the action script will not work for the buttons

You would have to manually delete the color profiles in question... Run the cleaner tool and see if it gets you started.
http://www.adobe.com/support/contact/cscleanertool.html
Mylenium

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

I have a 4s i upad te to ios7 and the location (GPS) is not working

I have a 4s i upad te to ios7 and the location (GPS) is not working, mapa is working, but cant find places or tell me my location... Can ana One help me ????

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Why "send sms" not work in flash lite3 ???

hello
i write this code for send sms in device :
on(release) {
if(_capSMS)
getURL("sms:" add myNumber add "?body=" add myText);
it work fine in flash lite1.1 & 2.x
but not work in flash lite 3 !!!!!
what shall i do ? please help me
can i make the command geturl to work on flashlite 3?
or how can i open an url from flash lite 3?
please help me

Hi,
It appears that the problem is with the security sandbox. To
be able to send an SMS, it looks like you have to publish for Flash
Lite 3, and in the Publish Settings, set 'Local playback security'
to 'Access network only'. I used the following code:
on (release) {
if (System.capabilities.hasSMS) {
getURL("sms:" + myNumber + "?body=" + myText);
And it would only work when the publish settings were set as
above. This was testing on a Nokia E65 with the developer edition
of FL3 installed.
Hope this helps!
Darren

Captivate 4 AS2 Text Entry Box not working with Flash Player 11

I am having issues with text entry boxes not working at all in flash 11. I am using Captivate 4 and exporting an AS2 swf. When you get to the slide you can type but you cannot see anything nor does the button or keystroke to move on. Also there is no cursor. Any ideas?

You said it is not working with Flash 11, so does that mean you tested with previous version and that worked?
While publishing choose Flash player as 9 and publish that, verify if that plays in a compatible web browser.
AS 2 is a legacy scripting, it has been said not too be supported with even Flash Player 10 --
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=Part2_AS2_LangRef_1.html
I believe if you switch back to version 9 while publish your project, it should work.
Thanks,
Anjaneai

The PDF output is not always displayed!

Hello
I'm tryin' to build some PDF outputs and I have the next problem: I have 20 reports to make it on PDF form (viewed with the Acrobat plugin from IE 5.5 or higher) and when I try to see what was builded the PDF it's not always displayed ( mean it's not readed by the plugin). I generate the PDF output from a servlet (which also set the servlet output context as 'application/pdf') and, if the output it's generated too fast (meanning the report information was too small), the Acrobat plugin doesn't catch him ! I think that I have to slow down the servlet response to allow the plugin complete loading, but I don't khow how to do this (and, ofcourse, if it's possible).
Please, I need a solution. !
Thanx!

Hi,
setting content type as application/pdf is quite enough for the plugin to catch
I generate the PDF output from a servlet
(which also set the servlet output context as
'application/pdf') and, if the output it's generated
too fast (meanning the report information was too
small), the Acrobat plugin doesn't catch him !but i think IE has a problem catching this, cause i also once ran thro this kind of problem
I think that I have to slow down the servlet response to allow
the plugin complete loading, but I don't khow how to
do this (and, ofcourse, if it's possible). Yes it is possible.... if ur sevrvlet ehich is displaying pdf is http://host/PdfServert
just make in such a way that the extention is pdf..
http://host/PdfServert?xy=z.pdf or register the servlet with .pdf ext
http://host/PdfServert.pdf...
belive it really worked perfect for me..
regards,
Arun.N

NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug

Title
NetStream.send not working in Flash Player 11.2 Beta with Cirrus, Please confirm if it is a bug or feature
Description
Problem Description:
NetStream.send can not send data to peerstreams when using with cirrus. Conflict with documents.
Sorry for tag the build as 11.0.1.3 while the bug is actually on 11.2 beta since the bug report system didn't have 11.2 beta yet.
If you are not responsible for 11.2 beta bug fix, please help a hand to handle this bug to 11.2 team.
This bug is "killing" to your application, so we really appreciate your help. Thanks.
==Publisher==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, NetStream.DIRECT_CONNECTIONS);
ns.publish("sendtest");
...//after connection success.
ns.send("clientfunction", "ok"); // this line cannot reach subscribers. even if subscribers have client object correctly.
==Subscriber==
nc.connect("rtmfp://");
var ns:NetStream = new NetStream(nc, cirrusid);
var client:Object = new Object();
client.clientfunction = clientfunction; // target function
ns.client = client;
ns.play("sendtest");
Steps to Reproduce:
1. compile the code in the attachment to SendTestExample.swf (not be able to paste it here)
2. run it under flash player 11.2.202.19 beta
3. run it under flash player 11
Actual Result:
HeartBeat is:
Start HeartBeat:
send hello
send hello
send hello
which means NetStream.send was not able to call "clientfunction" as expected.
Expected Result:
Start HeartBeat:
send hello
in client function: hello
send hello
in client function: hello
send hello
in client function: hello
which can call into the clientfunction as flash player 11 did.
Any Workarounds:
I can not find it out since it's an api level bug. But this can be very important for lots of applications which rely on send to do rpc.
Test Configuration
IE8, Firefox under Windows 7
Also have problem under Windows XP (but not well tested on this platform)
App Language(s)
ALL
OS Language(s)
ALL
Platform(s)
Windows 7
Browser(s)
Internet Explorer 8.0
==Attachment==
package {
    import flash.display.Sprite;
    import flash.events.Event;
    import flash.events.NetStatusEvent;
    import flash.events.TimerEvent;
    import flash.media.Video;
    import flash.net.NetConnection;
    import flash.net.NetStream;
    import flash.text.TextField;
    import flash.utils.Timer;
    import flash.utils.setTimeout;
    public class SendTestExample extends Sprite
        public static var statusArea:TextField;
        var ncServer:NetConnection = new NetConnection();
        var nsServer:NetStream;
        var ncClient:NetConnection = new NetConnection();
        var nsClient:NetStream;
        var timer:Timer = new Timer(1000);
        public function SendTestExample() {
            ncServer.addEventListener("netStatus", onNCStatusServer);
            ncServer.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
            statusArea = new TextField();
            status("status");
            statusArea.x = 0;
            statusArea.y = 0;
            statusArea.border = true;
            statusArea.width = 200;
            statusArea.height = 350;
            addChild(statusArea);
        function onNCStatusServer(event:NetStatusEvent):void {
            status("Step 1:");
            status("server: " + event.info.code);
            status("id: " + ncServer.nearID);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    nsServer = new NetStream(ncServer, NetStream.DIRECT_CONNECTIONS);
                    nsServer.addEventListener(NetStatusEvent.NET_STATUS, onNSStatusServer);
                    nsServer.publish("sendtest");
                    ncServer.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusServer);
                    ncClient.connect("rtmfp://p2p.rtmfp.net","99f72ccbed0948d7589dc38a-3ce1b2616680");
                    ncClient.addEventListener("netStatus", onNCStatusClient);
                case "NetStream.Publish.BadName":
                    //status("Please check the name of the publishing stream" );
                    break;
        function onNCStatusClient(event:NetStatusEvent):void {
            status("Step 2:");
            status("client: " + event.info.code);
            status("id: " + ncClient.nearID);
            switch (event.info.code) {
                case "NetConnection.Connect.Success":
                    nsClient = new NetStream(ncClient, ncServer.nearID);
                    var c:Object = new Object();
                    c["clientfunction"] = clientfunction;
                    nsClient.client = c;
                    nsClient.play("sendtest");
                    ncClient.removeEventListener(NetStatusEvent.NET_STATUS, onNCStatusClient);
                    //setTimeout(sendHello, 5000);
                case "NetStream.Publish.BadName":
                    //status("Please check the name of the publishing stream" );
                    break;
        protected function onNSStatusServer(event:NetStatusEvent):void {
            status("nsserver: " + event.info.code);
            if (event.info.code == "NetStream.Play.Start") {
                status("Start HeartBeat:");
                this.timer.addEventListener(TimerEvent.TIMER, function (e:Event):void {
                    sendHello();
                this.timer.start();
        protected function sendHello():void {
            status("send hello");
            nsServer.send("clientfunction", "hello");
        protected function status(msg:String):void
            statusArea.appendText(msg + "\n");
            trace("ScriptDebug: " + msg);
        protected function clientfunction(event:Object):void {
            status("in client function: " + event);

Thanks for reporting. I can reproduce the bug in house. We will investigate.
Calise

GETURL is not working in flash player 9.0.124.0.

Dear Friends,
My swf and my html are in different domain so i got a issue
in GETURL function , It is not working in flash player 9.0.124.0.
in IE browser so that i add one parameter like allowScriptAccess
=always then its working fine.but my question is what will happed
if they will introduce any new flash version in future please tell
me what is the permanent solution for this issue.
Thanks

There is no way to know what will change in the future. This
is the solution that works now. It will probably remain in place
for the reasonable future.

Dimension security is not working if user have two roles in SSAS while connecting from Excel

Hello Genius,
I am facing the issue when user trying to connect the cube from excel if user have more than one role in ssas db.
Role 1: Countryuser, I have implemented the dimension security with country
dimension and countrycode attribute.
Role 2: CityUser, I have implemented the dimension security with
city dimension and citycode attribute.
If user is mapped to any one of above role dimension security is working perfectly according to the logic but mapped to both role, cube is exposing all the data in this case dimension security is not working.
Please give me the solution to fix this issue or incase I am wrong kindly advice.
Thanks
Ganesh

This is the expected behaviour as allowed sets in roles are unioned together.
This is not a problem when your roles are restricting across a single attribute.
eg.
US_role = {[Geography].[Country].[USA]
France_role = {[Geography].[Country].[France] }
as someone in both roles ends up seeing {[Geography].[Country].[USA], [Geography].[Country].[France] }
But when you have different attributes:
NY_role = {[Geography].[City].[New York] }
France_role = {[Geography].[Country].[France] }
The first role is unrestricted on countries and the second is unrestriced on cities which is effectively:
NY_role = {[Geography].[Country].AllMembers , [Geography].[City].[New York] }
France_role = {[Geography].[Country].[France], [Geography].[City].AllMembers }
And when you union those two sets together you end up with:
{[Geography].[Country].AllMembers , [Geography].[City].AllMembers }
Which means that someone in both roles can see everything.
So if you want to restrict someone to City = New York and Country = France you have to create a
single role where both attributes are restricted. So if you have a lot of these combinations you will either have to create a lot of "combination" roles or look at dynamic security.
The other thing that might work is make sure that you only give some users access to certain cities and others access to certain countries. It's the mixing of the two for a single person that causes the issues.
http://darren.gosbell.com - please mark correct answers

The pdf security is not working in Flash Paper

Similar Messages

Maybe you are looking for