The person who receives the call doesn't hear me! Please help

When i phone a person, I talk but the person doesn't hear me..

try a different connection, or try resetting the settings
settings>general>reset>reset all settings
you will not lose any information except wifi pw's
make sure to choose set up as new device when it asks, you didnt loose any info so its pointless to restore from back up, plus it would put the settings the way they were

Similar Messages

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?

My MBP with RD's Facetime camera freezes when changing portrait to landscape during facetime calls on the display of the person who i'm calling to, but it shows alright on my side, what's going on?
Another thing is that on Skype, whenever i clicked to sharescreen it only show a complete black out window. nothing else.
Tried restore OSX mountain lion, doesn't work. what should i do?

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

TS3899 Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.

Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.
Here is an example....
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <CAM-_T=[email protected]> <BLU0 ,[email protected]> <CAM-_T=CAUP+9GyYG-_ecOazo=[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
> Mime-Version: 1.0 (1.0)
> In-Reply-To: <[email protected]>
> Content-Type: multipart/alternative;
> boundary=Apple-Mail-85351E4C-6385-4256-BE9E-27C10517E136
> Content-Transfer-Encoding: 7bit

It seems pretty clear to me.
When you turn off your primary account the only active account the phone can send via is your Gmail account, and that's what you're seeing.
The question is why do you need to turn off the primary account.. which you answer:
When that is set up as the primary server and turned on I get a message that says "the recipient was rejected by the server
That's because your ISP (megalink) is using access controls to manage who sends mail through their mail server. The first thing they're probably doing is using IP address restrictions - essentially saying they'll only relay mail from any machine on their network (including dialup/DSL/etc. customers), but you're not on their network, you're on an AT&T (or Verizon) 3G connection which isn't in their IP address range, and therefore not valid as far as their mail server is concerned.
The typical solution to this is authentication - by authenticating to their server (via username and password) you identify yourself as a customer and they should relay your messages. So check your phone to ensure that you have authentication enabled for your primary mail account.
If that fails (e.g. they don't support authenticated SMTP) the next option would be to relay the message through your cell provider's mail server - as an AT&T wireless customer you should be able to relay through AT&T's mail server... likewise for Verizon (or whatever national carrier your iPhone is on). You'll need to check with your carrier's site for the specifics of the mail server address to use.

Print Problem - PDF is OK on Windows 7, but OK on Windows XP with "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem."

I have received a PDF which prints fine in Windows 7 but with Windows XP I get "Acrobat Reader An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem." and a blank piece of paper passes through the printer. I appreciate that Windows XP is no longer supported but I would like to think that the solution to this problem is not too difficult!
I have tried Acrobat 9, 10 and 11.
Any advice (apart from use Windows 7! ) would be most welcome.
Many thanks.

If you use the same Adobe Reader versions with the same PDF on Windows 7 and XP, then I would expect the outcome to be the same.
Is this a local or online PDF?
If local, is the file really exactly the same?
If online, in what browser?

Project Server 2010 - Modification date and name of the person who made the last change in the project

Hello everybody
I'm with a doubt.
I got in the business
environment Project Server 2010 and
would like to get the publication date,modification
date and name
of the person who made
the last change in
the project. It is possible
to doby the native
resources or is
there any query in
SQL Server to perform a
query of this information.
Thank you.
Obrigado por contactar o fórum Microsoft Technet!

Hi Hezequias,
You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
get the data based on the projectUID.
The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
For the "last modified by", I think it is not stored in any place.
But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
date and username automatically into a custom enterprise field.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

How to determine the Person who Rejected the SC item in Sourcing

Hi Experts,
We are working in SRM 7.0 ERP 6.0 EHP 4 in a classic Scenario.
We are creating free text SC without Supplier and on approval the Shopping carts are getting into Sourcing Queue.
In Carry out Sourcing the Purchaser is selecting the SC item and rejecting some items.
How can we determine the person who is rejecting the item in the Sourcing cockpit
Thanks
Pooja

Hi
Please see the below thread and answer your question
Issue in determining the Person who Rejected the SC item in Sourcing
Thanks
Ashish

Field which store the person who created the trip

Hi guru,
we can't to find which field of which table actually store the person who created the trip inbehalf of the employee. But I can only found the person who lastly change the trip in table
PTRV_HEAD field UNAME. Also what is the logic of when the field UNAME get updated, since for my testing, when another logon user change the trip's head data like date, reason this field get changed. But this field won't be change if the user only change the trip's line item data such as addition info, amount of the trip etc. Is it the real logic of the system?
Thanks in advance.
Liz

Hello Liz,
You can go to the transaction PRTE in there the table AEND you will find all the changes that occur for the particular trip.
Regards,
Raynard

Address number of the person who created the sales order.

Hello Experts,
I am currently making a report in which it has to send the output of the script as a email attachment to the person who created the sales order. For this i am using a standard include RVADOPFO but here we need to pass the address number and person number gor getting the rest of the details. So where i can find the address of the person who created the sales order. (I am able to get the name throuhg VBDKA-ERNAM, but i need address number of that person)
Thanks & Regards,
Uday S.

Hi Uday,
check
ADRC-NAME1 = VBAP-ERNAM
in ADRC you will get the address of the SO created person in the field ADDRNUMBER that you have to pass in the ADR6-ADDRNUMBER you will get the mail address in the field ADR6-SMTP_ADDR
hope it helps you
Thanks!
Edited by: Prasanth on Mar 12, 2009 3:15 PM

Why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message

why every time i hit my new message or iMessage notification it goes and creates a new message to the person who sent the message?

Hey Rkbethel
There are two ways to resolve this for you. For the first is go and do a Reset All Settings by going to Settings > General > Reset > Reset All Settings. It will not delete anything on your iPhone, but it will put all settings back to default. If it does not work, the next step would be to restore the iPhone back to factory settings.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Displaying the current users information instead of the value of the person who completed the form in the first place.

I found this fantatic post regarding querying the user profile service
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx?pi47623=2#comments
However i have an issue whenever the form is opened again either to view or edit, it displays the current users information
instead of the value of the person who completed the form in the first place.
Please help me, I'm turning more grey each minute

I think it is how the current user information is stored based on your logic.
You might be quering current value again when loading the form (Form load Rule).
you have to tweak your logic, after the user submits the form you can set the username to the one who saved it.
or in form load, write a logic to see if the form was not saved before and then query the username( by using internal field like "formstatue")
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

My phone was stole and i report it as a lost and the person who found the phone had connect to the internet many times but Icloud dont tell me the location of the phone !!! Tf

My phone was stole and i report it as a lost and the person who found the phone had connect to the internet many times but Icloud dont tell me the location of the phone !!! i dont know why i cant see the location why!!!!!

Hello,
Go to
https://www.icloud.com/#find
Sign in. Under the "Devices" Tab, if you iPhone isn't listed, Find my iPhone was never set up and there is no way to track it. If it appears, but is shown as offline, it means that it was set-up but is currently not trackable (no wifi connection active). Best of luck.

Hello, Please Help! When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync. Please Help!!!

Hello, Please Help!
When I bring the mastered audio from Soundtrack pro back to final cut pro 7, the audio plays well at the beginning 3 mins later it doesn't sync.
Please Help!!!
Edgil

Make sure your easy setup has the correct frame rate for your sequence. Seems crazy but somehow or other fcp assigns a frame rate to audio files. I've found this can sometimes be tricky to get right. Here's what I've done to force the issue. Make sure the easy setup frame rate reflects that of the target sequence in fcp. Create a new project. import the audio in the new project. And then copy the clip from the new project to your main project.
Good luck

HT3529 if you have a restriction on your iphone can the person who put the restriction on the phone be able to see who i text with the other persons email?

i want to text my friend who recently moved from out of state but i have a restriction and she has a new number, would the person who put my restriction on my phone be able to see who i text if i text her on her Imessage account or no? i really miss her!

There is some issue going on with multiple people related to the Facebook for BlackBerry notifications. You're not alone in that respect.
Not sure if the issue is with Facebook or the application, but I'm leaning towards Facebook since it's pretty much sucked on my PC the last several days, too.
http://www.blackberryforums.com/aftermarket-software/204335-facebook-oddities-sep-15-2009-a.html
If you find a post here helpful, please consider giving the poster some Kudos

Hi i am using personal hot spot before updating 6.1.3.now iam using ios 6.1.3 version the personal hot spot is not working..can you please help me on this?how to use that,its in a default mode?

Hi previously i use personal hotspot,after updating my 6.1.3 ios in india iam not able to use that.It is in a default mode.
Can you please help me how to use personal hotspot.
Thanks,
Goutham.

Im really good at programming but really suck at algorithms
>If your are 'really good' at programming, you will be able to solve this problem. Because, it has nothing to do with algorithm.
>>can someone please please write in a algorithm form for me , i need it by friday i would greatly be thankful for u
>Wrong person, in the wrong place.

Does one of the Lync SQL databases store the active directory username or SID of the person who made a call ?

I am trying to write a report that uses data from Lync (2010), Active directory (AD) and other databases.
I need to match data from Lync with records in active directory.
When you make/recieve a call, the session details has a userid column - a foreign key to the users table, which has the UserURI - the users emails adddress or telephone number.
However, trying to mach the data, I have noticed that someones email address can change so that what is in active directory does not match that used as the SIPaddress in Lync.
I need a field that matches in Active directory and Lync to be able to link a users call records with their active directroy records.
I was wondering how Lync decides which Lync user you are when it auto logins you in.
Does it do it on the basis of your phone number, AD username or something else ?
If so , where in Lync does it store the mapping from whatever it uses to your Lync userid ?
Greg

The msrtcsip-primaryuseraddress attribute in AD is where the users SIP address is stored.
This can change still, but generally that should not be very often except maybe a name change or domain name change.
Almost everything in Lync is based on the SIP address. In CDR's case, it is just recording SIP messages as they pass through the front end; it has no visibility into the actual AD account that sent it.
If you will need to match user SIP addresses back to live AD accounts, even after a SIP address change, then I would recommend setting up a custom AD attribute to store their SIP account history and have a policy to update that attribute each time someone's
SIP address gets changed.

The person who receives the call doesn't hear me! Please help

Similar Messages

Maybe you are looking for