The phone column number is unknown

Why I iPhone mobile phone set inside the phone column number is unknown？My number is telecommunications, also restore settings, for other telecom card, but no effect。Why？

I have the same problem too with my iPhone 5. I tried putting my sim card in another iPhone 4 to change the number, but that didnt work either. My iMessage and Facetime can only be seen with my email and not my number.

Similar Messages

  • My phone and number is on another persons account.  If I start my own account, can I transfer the phone and number to it?  If so, what steps do I need to take to do this?

    My phone and phone number are on another persons account.  If I open my own account with Verizon, can I transfer the phone and number to it?  What steps do I need to take to accomplish this?

    I've done this before. First, I had the current acct owner call in and say it's okay for me to assume liability on the line. Next, I called in and explained that the owner already called and gave permission for me to assume the line. Notes were on the account. I was transferred to the assumption of liability dept, I accepted the terms and conditions and we were good to go. The old owner will get a final bill up until the point of transfer and you will get a new bill starting at the point of transfer.

  • Get the raw/column number of a left-mouse clicked table cell

    is this possible to get the row/column number of
    a cell where a mouse is clicked? Accutally, i want to implement a
    dynamic one column list which the user can "Add" or "Delete" some entries. The
    "Add" function is all right. The "Delete" function
    makes me upset because I cannot catch the cell's location where the
    mouse is choosing. I tries to use "Active Cell", it seems does not
    work. Do you have any clue? is this possible to implement the dynamic list using the "listbox"? thanks

    I would use the EditPos property value.  In my testing, it always returned the row and column of the cell I had left-clicked on.

  • My iphone has been lost and already reported to the police is there any solution to get my phone imie? using the phone serial number?

    My iphone has been lost and already reported to the police is there any solution to get my phone imie? using the phone serial number?
    Help me pls

    http://support.apple.com/kb/HT4061

  • HT1267 How do I find the owner of an iphone I have found But there is no contacts or Cell number of the phone that is the phones cell number and the phone has been suspended and you can't get any information on returning it .

    How can I find the owner of a found phone that  must have been reported stolen but all you want to do is find out who the person is that owns the phone. But you have no idea who the person is who stole the phone in the first place but now you only want to give it back to its rightful owner.

    I found a iPhone 5s, and I'm willing to return to the owner ASAP, but it seems that "he" have not turned on "Find my iPhone".
    Could anyone help me get in touch with the owner, that was probably here for the 2014's World Cup?
    I'm a Brazilian Apple user, and got stolen 6 months ago. I'm fully aware of what it is. Please, don't flood me with the obvious. The law here DOES NOT WORK.
    This owner must get it back, even if I must send it overseas.
    Thank you for the support.
    <Edited by Host>

  • Apps and movies won't open under my old itunes msn id, but the newer iCloud id presents no problem. i've reset the phone a number of times. is there away to get all my previous purchases from my old account transfered to the newer iCloud account?

    i now have three Apple Store accounts. The first was when I signed up for mobileMe ending in "me." The second ending in "msn" And now the third ending in,"icloud"
    The first two seemed to be linked and i would get notifications to update even when i wasn't signed into that account. All the apps downloaded worked just fine on my Iphone4  whether they were downloaded using my iphone or whether they were downloaded from my macbook pro no matter which account they were downloaded from. Now since i started using icloud and after a number of restores my Apple id under "msn" downloads on the apps and my movies all purchased from itunes won't open up. All the other id's apps open up just fine. I've reinstalled itunes, deleted all the apps under the msn account and tried to redownload on both my iphone and my laptop but, no sucess.
    I think the only way to get the apps that i've paid for previously is the see if itunes could move my previous purchases from one account, "msn", to my "icloud" account. has anyone else had a problem like this and how can I makethis happen?

    We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple - I've asked the hosts to remove your email addresses from your post (it's not a good idea to post personal info on any public forum).
    Is the old account a completely different iTunes account, or is it just a previous primary email address on the same account ? If it's a different account then all content that you download from the store is tied to the account that downloaded it, so only that old account will be able to download updates to its apps.
    If it's the same account, just a previous primary email address, then what id shows at the bottom of the Featured tab in the App Store app on your phone ? You could try tapping on that and log out of it and then log back in with the updated version and see what id then shows for updates.

  • My Iphone 3g has been stolen, is there a way to track it back using the phones serial number? i think the snatcher already turned the icloud off.

    I lost my phone, suddenly when i tried to track it, i found out that the icloud was already turned off.

    Unfortunately no. There is no way to locate it other than through iCloud and Find My iPhone. The serial number is of no use, other than to establish ownership should it be recovered.
    Consider availing yourself of this service: http://www.stolenlostfound.org/

  • When I try to connect my iPod touch I get an error message that the "phone" is not recognized, unknown error 0xE8000084.  Help

    I am using my husband's old iPod touch and when I try to connect it to iTunes I get that error message.  It is recognized in my computer as unspecified under Devices and Printers

    Thanks.  I had searched for that error message but had the whole number and nothing came up.  I followed the directions and now it is recognized.  The only thing I hadn't done before was to disconnect my external hard drive.  Go figure.

  • My phone number is "Unknown"

    I just got my new iPhone 4 S in the mail and synced it up via iCloud and it still says "No Service".  Then when I plugged it in to iTunes it said on iTunes that the number was "Unknown".  On the iPhone itself when you go to Settings>Phone>My Number says Unknown as well.  How can I get this fixed?  Thanks!

    Just got a working solution after searching for weeks.
    I have an unlocked 4s I use with pepephone in Spain and my number was showing "unknown" with impossibility to change it.
    I got the sim card from someone who's got an official iPhone carrier, Movistar, put it in my iPhone, went to the Phone settings and could see the Movistar sim card number with possibility to change it. I clicked on it to change and while in edit mode took of the friend's sim card and put back mine, waited for it to get the network while still being in edit mode, then input my own number and saved.
    Now even after rebooting the phone my own number shows and is editable. Problem solved.

  • Translation and Called # on the phone display

    Is there any way to made translation but leave displayed called # on the phone to number before translation?
    And similiar one with RoutePattern:
    When i prefix something like "666" on LG level to called #, after Setup/connect phone start to display called number with this prefixed digits. Is there any way to stay display w/o prefixed digits?

    I check it up, when user dialing and waiting for CONNECT from PSTN side - display shows correct short number, but after connect the number changes to long one. On isdn site it looks like:
    - dialed #: 12345678
    - called to PSTN: 6666666601234567
    (6666660 is IVR/IN telco operator number)
    and and i think becouse ISDN gives "connected" with called # no "real Called ID".
    Is there any way to made it displaing just 1234567 ?
    Sth like - always how dialed # or something ?
    TIA!

  • Moving phone and number to suspended line.

    I have a plan with 3 phones on it.  One line is suspended and another is at the end of the contract length.  Can I move the phone and number from the finished contract over to the suspended line so that the suspended line contract can be finished out

    No, the contract is attatched to the actual number itself... It CAN be done, but at great lengths. you would need to transfer the out of contract number out of verizon wireless, then proceed to replace the in contract number with that one though the port center. Not sure if it's worth all of this trouble for you to jump through all of these hoops...

  • My number is unknown in the phone settings

    My number is unknown in the phone settings i cannot edit
    i restored twice with no success i'm  using ios 5.0.1 on iphone 4S
    The only thing i did is that i have activated iphone using another SIM but i used the original sim in the next 2 restore trials

    Hi there,
    Unfortunately the provided sim cards & the systems of Omantel doesn't support identifying your phone number and the only way to activate the iMessage will be through using your Apple ID or if you have the option to move to the second operator Nawras were you won't face this issue.
    Good luck!

  • My phone number shows as unknown in the phone settings

    Newly unlocked Rogers iphone 3G now my new provider name appears, i can call, but nobody can call me---my phone number shows as unknown in the phone settings---i have restored to factory settings twice---phone tells me it's unlocked---whats wrong?

        Falktr,
    That's definitely odd but I understand how frustrating this is, we definitely want to assist you. Is this a Verizon Wireless iPhone? If not, you may experience problems such as this. If it is, please reset the network settings http://vz.to/Q7XEOV. If that doesn't work, please follow these steps http://bit.ly/19vT5qz .
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • HT1529 How do I find the phone number for my iPad 2 ? Says unknown :/

    Where can I find the phone number for my ipad2???

    You aren't running Mac OS X 10.3 if you have an iPad.  The oldest Mac OS X that will connect to an iPad from a Mac is Mac OS X 10.5.   The solution should be here.

  • Cisco Unity 7: Voice mail cann't get the name or Number phone of the caller

    Hi,
    I have installed Cisco Unity Messaging Unified version 7 and integrated with Exchange 2010.
    I have two scenario, and I want to know if are normal or not:
    1.       If the 2 IP phones are subscribed with Cisco Unity: the first IP phone call the other IP phone and let a voice mail. When the second IP phone check his message vocal it can get the name of the caller or his number phone (the message is: You have One message from XXXX) and he get e-mail as objet: Voice Mail from XXXX.
    2.       If one IP phone is not subscriber with cisco unity call other Ip phone subscribed with cisco unity and let him a voice mail. The second IP phone when check his message vocal it can’t get the name of the caller or his number phone: The message is: You have one voice mail xxxx; without indicate from!! and he get a e-mail as object: Voice mail from Unknown.
    Please, I want to know if the second scenario is normal ? if not, who to resolve this problem? I want that he indicate the number of caller same he isn't subscriber with cisco unity?
    Thanks a lot,
    Best regards,
    Omar YUNSI

    So for the 2nd scenerio you would want to check what your Message Subjects were set to.  For Unity 7 open Web SA, click Configuration and then Message Subjects.  Make sure that the Outside Caller Message has %CALLERID% in it somewhere.  The value %CALLERNAME% will return unknown if we do not receive a name from the PSTN.
    Try setting the Outside Caller Message to:
    %U% %P% Voice Message from %CALLERID%
    and that should get you your desired results.
    The default Message subject is:
    %U% %P% Voice Message from %CALLERNAME% (%CALLERID%).  So with that it would say Voice Message fom Unknown (xxxx) if it was not able to determine the name of the user which is usually normal from a PSTN call.
    Just to note, the From address is always going to say from Unity Messaging System, it will only be the subject that has the extension in it.
    Bryan

Maybe you are looking for