The picture frame in the blog summary!
Hey,
by default a frame of the blog entry picture shows up in the blog summary right with its text... It was all good, but by adding my second blog entry i suddenly found both entries on the blog summary page are without no photos... even by playing with the "placement" of the picture and text format of this page... just nothing...! u can check it out here : http://www.bynomad.net/Nomad/Blog/Blog.html
thanks
ok i figured it out! i was deleting the default shot and then add my picture! well what is supposed to be right is just drag and drop it over the default picture, this will still make it bounded to the blog page!
i still find it silly anyway... also re-adjusting the default page every time i post something... they should create a custom thing for each page i believe...
cheers
Similar Messages
-
How to delete the photoes in the picture frame
I deleted all the photoes, but they still show in the picture frame. How to delete them?
If you have any synced photos on your iPad the only way to delete those is by syncing again with iTunes... Either sync an empty photo folder or unselect the photos folder from the photos tab in iTunes and sync again.
Are you sure that you are not using Photos from your Photo Stream? Go to Settings>Picture Frame and make sure that there are no albums, or photo stream photos to choose from. -
How to change the picture frame size in Lightroom 5 Book
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas
Hi again Tony,
I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
I think we’ve pretty much concluded this exchange. Thanks again for your effort.
david
ay [email protected]
Sent: Wednesday, March 12, 2014 11:27 PM
To: dgbrow
Subject: How to change the picture frame size in Lightroom 5 Book
Re: How to change the picture frame size in Lightroom 5 Book
created by Tony Jay <http://forums.adobe.com/people/Tony+Jay> in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206 -
How do I blow up a picture without affecting the picture frame?
Hi everyone. Is there any way to blow a picture up without making its frame bigger? In other words, I only want the picture to get bigger, not the frame it's in. Thank you. Is it to hit the command > button? I'm using a Mac by the way. Thank you, thank you
In CS5 you have the often despised 'content grabber' which is a donut shape that pops up when you hover over a picture with the selection tool (the black arrow). When you see that click on it, then you have the picture selected itself with a brown frame, you can then scale away with the corner handles or use the scaling tools in the control bar.
Alternatively you can select the picture with the direct selection tool (white arrow) or double clcik it with the selction tool, either way will select the picture itself, like the content grabber.
Edit: I don't want to put you off the 'donut', as a newer user you may find the content grabber a useful tool. When I say 'often despised' that's by some of us who are stick in the muds and don't like things popping up all the time when you only need them very occasionally like frame edges... -
I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed.
Why? I've seen demonstrations on how to use the feature but mine doesn't work. I checked the updates and I have the current version.
Thanks. LMI am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.
-
How Do I Remove the Picture Frame Icon From My ipad????
Okay, I have read several answers which address this. I have the latest generation ipad and have this annoying picture frame icon on my lock screen. The discussions say to turn passcode on/off, yada yada. When I turn the passcode on, the icon disappears, but every time I power down or after a period of time, I have to re-enter the passcode. Is there some way to disable the icon having the passcode off? Or am I just stuck with the icon if I disable the passcode? I tried tapping on General, then passcode lock (which is in the off position)to turn the passcode off. Next screen says turn passcode on, (which I assume means that the passcode is of). Picture frame is "off", but shaded gray.
tlynne28 wrote:
When I turn the passcode on, the icon disappears, but every time I power down or after a period of time, I have to re-enter the passcode. Is there some way to disable the icon having the passcode off?
No. You either use a passcode and disable the Picture Frame icon, or live with the icon and no passcode. If you don't like the way that it currently works, let Apple know how you feel about it here.
Apple - iPad - Feedback -
Allow cropping boundaries to go outside the picture frame
Currently, the crop window is restricted to be inside the picture window. When the picture is rotated, the crop window shrinks to prevent it from extending outside the picture frame. This functionality is most often preferred.
However, for some situations, there should be an option to unlock this feature, allowing the crop to go outside the frame. Upon export, white space (or a color of selection) will be substituted for the are outside the picture. What I am asking for is the same functionality RawShooter has!!I want the feature, but implemented better than in RawShooter. Some photos would look best cropped a certain way but need a little sky or whatever cloned into a corner.
A simple way for Lightroom to provide this is to have the crop box work just like it does now constrained to the images pixels, but by pressing and holding, say, the Alt/Opt key, the box would become unconstrained. Holding down the Ctrl/Cmd key could be used to rotate the crop box 90 degrees by clicking on one of the borders.
In response to the nay-sayers, for many people (see, I'm not just speaking for myself) the idea of workflow is the "flow" part, not the "work" part. For me (and the many people) getting images cropped right is part of the flow. Jumping to Photoshop is an interruption. (Of course, for others the flow is completing each image as they go, but when I do that I am way too slow.)
For the bloat-beware folks, the hard part is constraining the crop box to the pixels, not uncontraining it. BTW - Lightroom's handling of cropping and rotating is WAY better than RawShooter's. -
Will ios 7 on the ipad have picture frame on the lock screen? Or did they take it off??
Will iOS 7 on the iPad have picture frame on the lock screen? Please answer?????????????????????
Yes, unfortunately apple did get rid of picture frame with ios7 and a lot of people are complaining about it. Pretty annoying cos I like to use my iPad to display photos. Now we have to rely on third party apps.
I've tried quite a few and found that Picmatic is the one I like the most, plus there's a free version. You can get it here: http://goo.gl/rLOU1 -
I had the first ipad now i have the new ipad air where the the picture frame app?
i had the first ipad now i have the new ipad air where the the picture frame app?
Apple iOS designers did away with the Picture Frame slide show app and the lock screen icon that used to activate it.
If you are looking for a replacement, look in the iOS App Store app and search for Picmatic.
This is a pretty good replacement for that function. -
Can the Picture Frame change rate slow down?
Twenty seconds is *way* too fast but appears to be the slowest it goes. Ideally something like twenty *minutes* is what I'm after.
Yes, I saw that slideshow feature in Photos so was disappointed to find that the Picture Frame feature is simply the very same thing! While I would agree with Apple that 20 sec is probably ok for a slideshow, where the user is concentrating on the screen and actively *watching* it, a picture frame is entirely different, it's just glanced at occassionally. A picture frame that flashes up a different shot every 20 secs is very distracting.
I suppose there is the solution of using lots of duplicates of each shot in an album to extend the time each is on screen, but even a 10 minute duration would need 30 copies of every image!
Thanks again, I'm back to the App store now [even that is not straightforward - trying to find a photo app that is not all about adding tacky effects shouldn't be so hard. ] -
When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version. -
How do I loop back from the first frame to the last frame?
Hi there,
I'm currently working on the framework for a product viewer.
I have:
a movie clip called 'viewer_mc' which contains the images take from different angles of the product. The actionscript generates a script on the last frame of this that returns it to frame 1.
a button instance called 'autoplay_btn' which plays through the movie clip from whatever the current frame is, and stops on frame 1.
a left and right button which serve to move the movie clip frame, to give the appearance that the product is rotating.
I have succeeded in getting it to:
have the movie clip play through once, return to frame 1 and stop.
have the buttons return functions when held down, that move the frame in the movie clip using nextFrame and prevFrame commands. The right button successfully loops round to frame 1 and continues functioning to give the appearance of continual rotation.
The last problem I am experiencing is getting the left button to act in the corresponding manner, going from the first frame to the last and continuing to function.
Here is my actionscript so far:
import flash.events.MouseEvent;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
1. This is the part that gets it to play through once before returning to the first frame. I think perhaps the problem I am experiencing is because of the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' part i.e. although I'm holding the left button, its returning to this script and therefor getting bounced back immediately to the first frame. However, there is no flicker on the screen which you might expect if this were the case
Note - as this is a generic product viewer which I can use as a template I am using lastFrame etc. as opposed to typing the value in
function toStart (){
viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
2. This is the functionality for the autoplay_btn that will play through a rotation / return the viewer to the initial (frontal) view of the product (frame 1).
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
var startFrame:Number = viewer_mc.currentFrame;
viewer_mc.gotoAndPlay(startFrame);
3. This is the functionality of the right button, which when held, moves the movie clip to the next frame via the 'rotateRight' function based on the 'nextFrame' command. It loops back round to the first frame due to the 'viewer_mc.addFrameScript(lastFrame-1, toStart)' script generated on the last frame of the movie clip, as is desired.
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
viewer_mc.nextFrame();
4. This is the functionality of the left button, which when held, moves the movie clip to the prev frame via the 'rotateRight' function based on the 'prevFrame' command. And this is where the problem lies, as although it works for getting the movieclip back to frame 1, it does not loop round to the last frame and continue functioning, as is wanted.
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateLeft); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
I'd imagine it is probably my logic for this part that is really letting me down - I can do a similar function in actionscript 2, but am trying to learn actionscript 3 just to move with the times as it were, and struggling a bit. Still this is only a few days in!
function rotateLeft(e:Event):void{
if(thisFrame==1){
gotoAndStop(viewer_mc.totalFrames-1);
} else{
viewer_mc.prevFrame();
Any help you can give me would be gratefully received. For an example of the effect I am trying to achieve with the autoplay button etc. I recommend:
http://www.fender.com/basses/precision-bass/american-standard-precision-bassThanks for getting back to me.
Here's the code without my comments / explanations:
import flash.events.MouseEvent;
import flash.events.Event;
var lastFrame:Number = viewer_mc.totalFrames;
var thisFrame:Number = viewer_mc.currentFrame;
var backFrame:Number = viewer_mc.currentFrame-1;
function toStart (){
viewer_mc.gotoAndStop(1);
viewer_mc.addFrameScript(lastFrame-1, toStart);
//last image of viewer_mc = first image of viewer_mc
autoplay_btn.addEventListener(MouseEvent.MOUSE_DOWN, autoplay);
function autoplay (ev:MouseEvent):void{
var startFrame:Number = viewer_mc.currentFrame;
viewer_mc.gotoAndPlay(startFrame);
right_btn.addEventListener(MouseEvent.MOUSE_DOWN, rightDown);
function rightDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stoprightDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateRight); //while the mouse is down, run the tick function once every frame as per the project frame rate
function stoprightDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateRight); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stoprightDown); //remove the listener for mouse up
function rotateRight(e:Event):void {
viewer_mc.nextFrame();
left_btn.addEventListener(MouseEvent.MOUSE_DOWN, leftDown);
function leftDown(e:Event){
stage.addEventListener(MouseEvent.MOUSE_UP,stopleftDown); //listen for mouse up on the stage, in case the finger/mouse moved off of the button accidentally when they release.
addEventListener(Event.ENTER_FRAME,rotateLeft);//while the mouse is down, run the tick function once every frame as per the project frame rate
function stopleftDown(e:Event):void {
removeEventListener(Event.ENTER_FRAME,rotateLeft); //stop running the tick function every frame now that the mouse is up
stage.removeEventListener(MouseEvent.MOUSE_UP,stopleftDown); //remove the listener for mouse up
function rotateLeft(e:Event):void{
viewer_mc.prevFrame();
The definition of the rotateLeft function is where the problem lies I think - I've taken out my poor attempts at doing the logic from the previous post. If I were to write it out long-hand the statement I want to write is: 'If you get to frame 1 and function rotateLeft is called go to the end of the movie clip'.
The reason I have to use the viewer_mc.totalFrames-1 definition in the addFrameScript call is the addFrameScript function is 0 based i.e. if you want to call frame 1 of the movieclip you have to return a value of 0 in the addFrameScript (or such is my understanding of it anyway). As such, the last image in the movie clip will need to be the view obtained at 360 degree rotation, which is of course the same view as at 0 degree rotation. As a consequence, the last frame in the movie clip is superfluous for the user, but necessary for the overall effect to be achieved. And, in addition, to keep up the effect of a 360 degree view when the rotateLeft function is called it needs to skip that last frame to go to the lastFrame-1 (or totalframes-1), or in other words, the view of the image prior to completing the full 360 rotation.
the variables thisFrame and lastFrame are defined at the very top of the script. Like you said they might need to be defined or called on again elsewhere. -
Using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper
using iphone to print to hp 8500a plus, but cannot get the picture centered on the photo paper installed hp photo app on iphone to utilize printer
Are you using Page Setup within Firefox?
https://support.mozilla.org/en-US/kb/how-print-websites#w_changing-the-page-setup
See - Margins and Header/ Footer -
I have Adobe Reader XI. All my files have a picture on the first page. I used to be able to see that picture but now I can only see the PDF logo. How can I change that so I can see the pictures instead of the logo?
Windows 7
-
Where are the pictures found in the Adobe Photoshop 10 organizer?
Nov. 29, I had my computer repaired from a trojan, & I figured out that everything i've done since Sept. 13th was gone because when the computer guy was fixing it, he tried to put in the new MicroSD card reader, but he had to put an old one back in (from Sept.) as the new one had wrong connections.
Then, when he started the PC he only had the C drive (& my documents and pictures are on the A drive). He turned it off and realized he accidentally disconnected one of the mirror hard drives for Drive A. He had to turn it off and open it again and reconnect the cable that was disconnected.
During that moment perhaps a line in the drive had become corrupted. So, I restored through Carbonite, hoping I'd get back almost everything (or at least whatever was done being backed up). However, I lost quite a few pictures.
Tuesday, however, I noticed that the pictures I lost were imported into the organizer for Adobe Photoshop 10, which is on the C drive, so I'm hoping the pictures are still there, even if they are thumbnails (I assume they would be)! But where are the pictures found in the Adobe Photoshop 10 organizer? I assume in a folder somewhere? Am I able to copy them? (A low quality image, is better than no image!)The thumbnail cache is separate and lives in the system files.
You could try a new catalog - it doesn’t involve any duplication.
Click: File >> Catalog
Click the New button
Give your catalog a name e.g. My Catalog2 (or whatever you prefer)
Check the box Import Free Music - that will bring in the Adobe MP3 tracks used in slideshows
Then click OK
When the new blank catalog opens click: File >> Get Photos and Videos >> From Files & Folders
Navigate to your root folder (normally Pictures or My Pictures or wherever you put your photos) then press Ctrl+A to select all sub folders or make sure the checkbox is marked.
Click Open or Get Media
Wait for Elements to complete the import, accept all keyword suggestions (select all) and then wait for thumbnails to finish generating.
N.B. You may not get all the metadata (keywords etc) but in view of the problems you have had it may be your best hope.
Maybe you are looking for
-
LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse
Subject: LOADING ADDITIONAL COSTS (change matches revenue cost of goods in warehouse and not accounting for the year 2008) Problem: we must add the cost of goods of the raw material (for which was made a check invoice) of the costs, which are arising
-
How to automate the purging of archivelogs on primary when backing up from physical standby?
Hi, When configuring archivelog backups to run from my Active Standby database (11.2.0.3) I am running into an issue where the archivelogs on the primary database are not getting purged. This is resulting in the archiver hanging on the primary. run {
-
Web Dynpro ALV : get_model_extended - example
Hi, I'm trying to used this method to limit my columns display, if any one can help to give me the example to use this method. Need to pass S_PARAM, i'm not sure what value to be passed. There is note for this, but there is no usage example. [https:/
-
Hi guys, I already run XL Reporter and check the UDF that i want to use in creating the reports but the UDF does not appear in the Report Composer. I am using B1 SP01 PL04. I hope anyone can help me on this. Regards, Michael
-
Anyone else having trouble with the app store on iPad today?
The app stor app is malfunctioning. Frozen in categories, wouldn't download updates. I shut my iPad down and tried again, synced it with my computer. Same result.