THE PLAETIC PART THAT FIT AROUND THE AUDIO OUTPUT JACK IS MISSING,CAUSES AUDIO TO DROUPDROP OUT

1. HP Pro Book 4525s
2. Windows 7 64bit
3. n/a
4. na

I was searching on Apple Discussions and many other users have noticed this problem. The web link is: http://discussions.apple.com/thread.jspa?messageID=2231106
Other users have noticed that ALL MacBooks have this problem- no matter what week made- thus HOPEFULLY this will get fixed soon in an update- otherwise Apple will have to replace the audio hardware on every MacBook shipped!
However- due to the fact that all MacBooks/Pros have this problem it is most probably a driver/ software issue. (knock on wood)

Similar Messages

  • When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    When I watch tv shows in Front Row that I've bought off iTunes the audio gradually falls out of sync with the video. It does not happen with other files that I have converted into mp4s. Any ideas for fixing this? It's a huge bummer...

    I too have the same problem.  The audio drop out of sync in about 5 sec in not uncommon for the audio to be 30+ sec behind video.  Apple needs to fix this!!!!!!!!!!!!!!!!   its a joke,  my iphone is all messed up after the last update as well.  at one time not to long ago apple products and software were top rated, not so much any more, more and more problems are showing up and apple is unwilling or unalbe to fix the many issues.  Apple needs to fix the audio sync problem, it not the computer hardware or other software it ITUNES!!!!,  there is no workaround other then hitting pause and hitting pause and hitting pause to temp fix the problem. 

  • Sample rate off the audio input and out devices do not match - what to do?

    This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
    Sample rate off the audio input and out devices do not match
    and am asked to do this:
    Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
    I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
    I am trying to record from LineIn.
    When running on a M-Audio sound card I don't face any problems.
    HP 8560W, sound card IDT/High definition audio Codec
    Any suggestions?
    Knud
    Copenhagen

    You're sure you have set BOTH the input and output settings to 44.1 16 bit?
    Which version of Windows are you running?  There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard.  Especially, you need to ensure that all "Windows Sounds" are turned OFF.

  • Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?!@

    Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?

    Playing rentals, Netflix, from local iTunes, other?
    Firstly restart router and AppleTv after unpowering to see if that helps - may or may not but quick and easy to try.
    Connection via ethernet or wifi?  If wifi are there any new devices in the house which may be causing interference or new neighbouring networks?  If feasible try to eliminate wifi issues by using an ethernet connection.
    AC

  • As i am watching a movie the audio will cut out in the middle of the movie.

    As i am watching a movie the audio will cut out in the middle of the movie. Also I am watching the movie in full screen mode.  IfI have a windows 8 and this article does not work http://support.apple.com/kb/ts1718. I have uninstall and reinstall with a current version of  quicktime.

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Since downloading OS X Yosemite I have been having issues with Netflix. Video slows down which causes the audio to go out of sync. Netflix plays ok on ipad which makes me think it's the software which is the issue. Has anyone else had this issue?

    Try this:
    Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
    If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse.  ONce the computer starts up again, wait for the pop-up looking for a mouse.  Turn on the power to the bluetooth mouse.  It should work normally now.

  • I'm using my electric guitar with GarageBand. With the input/output jack being full of my guitar cord, does anyone know if I can rig a BlueTooth speaker for output? Thanks in advance for any response.

    I'm using my electric guitar with GarageBand. With the input/output jack being full of my guitar cord, does anyone know if I can rig a BlueTooth™ speaker for output? Thanks in advance for any response.

    yes this will work
    you can also get a splitter cable that goes in to your in/out port so you can have 2 (or more) separate ports

  • When viewing online videos (news, sports etc) the audio is totally out of sync.

    I use three emails (gmail, comcast and juno) and when I click on anything that has a video, the audio is out of sync with the video. I originally thought it was only Comcast.net news but their techs have not been able to improve matters. So I ran tests on the others and found they had similar problems. Cursory checks of my PC, Acer HD monitor and my two small speakers didn't reveal anything. That doesn't leave much other than Fire Fox.

    If this were a project that I was involved in, I would recapture the media at the correct frame rate and rebuild the sequences correctly.
    Moving from production, to post production, to delivery is a series of steps, and the success of any particular step is based on having all the preceding steps done correctly.
    Shortcuts and workarounds tend to create awkward and difficult problems, that often only surface late in the process.
    MtD

  • I am using PP 2014 to edit AVC-Intra 100M 1080i50 and the audio keeps dropping out

    the audio comes back as soon as I stop and start the timeline.
    HP Z600
    W7 Ultimate

    Hi DV,
    Sorry you are having issues. FWIW, I also run a Mac and do not have these issues - however, I am still running OS X 10.8.5 on my personal machine.
    First of all, we need a lot more info: FAQ: What information should I provide when asking a question on this forum?
    deadvessel wrote:
    i have been getting the wierdest, most ridiculous issues using PP , 2014
    You say you are using "PP 2014," however, that is not precise enough. Which version of Premiere Pro CC 2014 are you using? 8.0.1, 8.1, or 8.2? Choose Premiere Pro > About Premiere Pro and look at the bottom of the dialog box. That will give you a precise version number.
    deadvessel wrote:
    Here is a list:
    Indeed, that's quite a list. My first suggestion is that you check out this article and perform the fixes there, if necessary: Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later) Are all the permissions set correctly?
    The other issue I see a lot is needlessly updating a project file in the middle of a project. The advice here is to avoid updating a project file to a new version of Premiere Pro as you work on it. Update before a new project is created.
    Try a test: update to Premiere Pro CC 2014.2 (8.2) and create a brand new project. Does it work better now?
    Thanks,
    Kevin

  • When I'm editing sometimes the video will blank out or the audio will blank out. Anyone know what might be wrong?

    The video blacks out and the audio goes on by itself, or vice versa.

    Here is the error I get when the clip does finish Conforming.
    https://imgur.com/nqdoWGH
    Any ideas anyone?

  • Is there a ring flash that fits around the Raynox 'snap-on' style Macro lens?

    I have a Canon G11 and use the Raynox Macro lens (MSN 202) for photographing snowflakes.
    Is there a ring flash that is made to specifically fit the Raynox lens or is it a case of buying one with a large enough internal diameter (something like the Polaroid Macro LED Ring Flash for Canon, model PLMRFC) to go around the Raynox and then coming up with a way to secure it in place?

    I bought the Vivitar  LED Macro Ring Flash DR-7000 which has threaded adapter rings 49, 52, 55, 58, 62, 67, 72 and 77mm.
    I bought it  for and old G5 and an S5 is. It also came with 4 diffuser rings. So far I am impressed and I cannot afford the Canon Ring flashes.

  • I would be playing a game then the audio would go out.......this happens on all the aps that i have iPhone 4

    What is this

        Hello Tomorrowschild
    I'm sorry your having issues with your phone. Let's get to the bottom of this quickly. Let's try turning the Wifi off on the device. Then power down and remove and reinsert the Sim Card and retest.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • Is there any way to keep the music playing through the headphones connected through the headphone jack, while also playing the music through a bluetooth device, such as speakers - so the audio is coming out of both devices simultaneously?

    When I connect my bluetooth speakers, the sound stops coming out of the headphones (connected via the hardwire jack), and then comes back when I turn off the bluetooth speakers. I would like to have audio coming out of both...
    Anyone?

    Thanks Kiwi. It doesn't make sense to me though, as that would seem to be only a simple change in the operating system, not a hardware 'necessity'.

  • Recently updated iTunes to 11.1.1.11 and now my Disney movies won't play - the audio keeps dropping out. Any help?

    Never mind ... cleaned the cache, cleaned the disk, cleaned the Java cache - it works.

    I've tried going through those steps prior to posting. This link that others and you have provided takes me to these instructions. There are no specific steps to uninstall and reinstall itunes. I did so anyway a couple times to see if anything changed. It did not. If I'm missing something, please let me know--it's really appreciated. I'm not using windows and it is my understanding that when you delete itunes (which I did through terminal) it deletes everything, so you don't have to go searching for random files as you would with Windows.
    Note: This article is for Mac OS X users. If you're using a Windows PC, please refer to these troubleshooting suggestions.
    Follow these steps to resolve your issue:
    Ensure that your Mac meets the minimum system requirements for your iPhone, iPad, or iPod touch.
    Install software updates on your Mac.
    Note: If an iTunes update is available, apply the update.http://apple.com/itunes/download
    Check USB connections. iOS devices require USB 2.0 to function properly. If you're not sure your Mac has USB 2.0 ports, refer to the computer's specifications.
    Disconnect other USB devices and connect your device directly to a USB port on your Mac.
    Restart your Mac.
    Looks like I'll be making that phone call...

  • Why is the headphones output jack so loud?

    The output from the headphone jack on the left of my MacBook Pro 15" (base model, latest as of 16/07/11) is incredibly loud. Even when my Mac has the volume on one 'bar' or 'block' when using the volume buttons, it's still extremely loud and almost deafening. I fear how loud it must be over two blocks, because I simply can't listen to it.
    Is there any change the min/max volumes that are possible? This MacBook Pro is only 2 days old.

    blakei21 wrote:
    Changing the output volume in Settings yeilds the same result, still very loud. I also performed a PRAM reset and it's still very loud.. this is a really weird problem :\
    Hmmm. Agreed, very weird. There have been many and varied issues with MBP audio out ports. I would try another set of headphones, if possible, and if same issue there, contact Apple. 90 days free phone support, 1 year hardware warranty, 14 day return/exchange period.

Maybe you are looking for

  • Word issues with upgradeing reports built in 10 to crystal 2008

    We have a bunch of reports that were built and running with 10. We are trying to upgrade our servers to run with crystal 2008. The reports built in 10 have been working when run with the crystal 2008 runtime. With the exception of a problem when open

  • Solution to error message not helpful  for uploading to web gallery

    Hi! I got an error message about not being able to do this because the server was not found. I went to "help" and was told to install iphoto '08. We have that ! Why would I need to install it? I don't want to bother dh with this as he is about ready

  • Text translation in run time.

    Hello Guys,                 I have an requirement its like: when we send data from SAP to other system using outbound idoc for material. I need to translate the material text at run time and populate in to some other 2  segments and send. I will be k

  • How to synchronize section within a sequence runnin over parallel model

    Have this sequence using the parallel model, I want to synchronize some section of it such that the steps been executed only in one of the executions; the Batch Synchronization steps didn't worked, apparently they work only if running the batch model

  • An error occurred attempting to read DynamicList

    Hi! I have a Netiq Sentinel 7.1.1.2 when I try make an dynamic list on the WEB Interface or in the control center, I see the next message error on the log: Tue Jun 03 11:45:54 CDT 2014|INFO|qtp209445166-14189476 - /SentinelRESTServices/objects/dyn-li