The platform firmware has corrupted memory across

1.After S3(STR) wakeup
System Eventlog
The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system.
Only affect MBR Boot(Legacy boot), Please FIX
Windows 8 Pro x64
990XA-GD55, BIOS v23.1(7640vN1)
2.Why "DDR Phase Control" was removed?
3.IOMMU device will used(Increase 20.6MB ram used of Hardware reserved), Please FIX
IOMMU Mode: Disable OR 64MB
4."Offical(MSI)" provide update exe please
RENESAS USB3.0 Host Controller Firmware
Version 4.0.2.0 : June 15th, 2012 (Today: 2013)
- The following problems are fixed.
1. Fixed the USB3.0 Host Controller in D3hot didn't send the PME Message
when it received any wakeup events.
2. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host
Controller Driver, but there was a possibility that this could still
occur in Windows 8:
[RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history]
1. USB3.0 devices aren't detected when users perform the below steps.
a) Turn on a PC.
b) Enter sleep (S3 state) without connecting USB3.0 devices.
c) Connect USB3.0 devices to a USB3.0 port during S3 state.
d) USB 3.0 HDD isn't detected.
The USB3.0 devices aren't detected after the PC resumes from S3 state.
With Windows 7 or earlier, this issue only occurs with driver Ver.2.1.16.0.
3. There is a possibility that the USB 3.0 Host controller cannot notify
the xHCI Driver when the Host controller receives the following contiguous
Device Notification Transaction Packets: Function Wake Notification,
Latency Tolerance Message (LTM) Device Notification, Bus Interval Adjustment
Message Device Notification.
We have never seen this problem on a real system.
4. Improved the interoperability of UAS devices in Windows 8.
5. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host
Controller Driver, but there was a possibility that this issue could
still occur in Windows 8:
[RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history]
2. There is a possibility of bluescreen caused by Hot-Plug operation of a
USB3.0 Hub connecting USB3.0 devices. With Windows 7 or earlier, this issue only occurs
with Ver 2.1.16.0.
6. Failed the TD7.3 of Link Layer test by using Ellisys Version : 2.0.4210
and Lecroy Version  1.35 Build107 or later.
This issue arose from changing the Link Layer test specification.

I have never and never will use sleep state. Seems 90% never work.

Similar Messages

I phone is keeping searching for network even if i take the Sim out and i did reset but no use also it cant make software update - and the modem firmware has no number also

i phone is keeping searching for network even if i take the Sim out and i did reset but no use also it cant make software update - and the modem firmware has no number also

Either your phone is broken, or it was jailbroken. You can try a DFU restore.

L2TP w/ PSK unable to connect via the phone dataplan, has anyone come across this?

I have been messing around with this on my Galaxy Nexus with Android 4.0.2 and have confirmed the following settings for VPNs to our corprate firewall.
PPTP over Dataplan CDMA -- Everything works fine
PPTP over Dataplan LTE -- Untested due to lack of availability where I live and work, will test at a later date.
PPTP over WiFi -- Everything works fine
L2TP over Dataplan CDMA -- Connection timeout
L2TP over Dataplan LTE -- Untested due to lack of availability where I live and work, will test at a later date.
L2TP over WiFi -- Everything works fine
OpenVPN not supported without rooting the phone -- Verizon please add this functionality into your base ROMs for all of your phones.
The reason I ask about anyone coming across this or having a fix is PPTP may work but it's old/insecure comparitively and may be going away in a future stable tree release of the corprate firewall I work with. The full support of L2TP and/or OpenVPN/SSL-VPN would make life a lot easier for us techs who need to bounce into a server quickly and do what's needed when having a PC at hand is impossible, ie at a sitdown resturant. If you need logs of the connect attempt let me know and I'll get them to you. I did however see this error posted on the Samsung Fascinate forum as well.

As of yet no, they are on my list of people to call but I won't be able to get to that call until a little later, once I do call Verizon Tech support I will reply with the post here if it hasn't been answered by someone who has come up with a workaround on the issue.

Wow the new firmware has made a mess of my Touch, Creative please resp

Okay, first I find out that some of my music is missing track number tags and is now listed in alpabetical order. Next, Media Source doesnt detect my Touch at all, so I have no easy way to fix my tags. So I have to move the music off my player, tag it all again, delete it from my Zen (because just overwriting doesnt work), then upload the newly tagged music to my Touch. But it gets even better. Alot of my folders in the Media Explorer contain random files names and some songs are in different album folders.
http://i8.photobucket.com/albums/b/MrCookie989/****youcreative.jpg
This is the album by The Who "Li've at Leeds", which does NOT show up on my Touch even though it is there. Notice that some tracks have the right filename (summertime blues, fortune teller), but some tracks that have filenames from artists like MC Chris (geek) or are from the Castlevania SOTN soundtrack (Awakend Soul). These are in fact all the songs for The Who "Li've at Leeds"...BUT THEY DONT HAVE ANYWHERE NEAR THE RIGHT TAGS! Needless to say, Im just a bit mad that this has happened to my music.
So, Creative, please tell me there is something I can do to fix this other than going through all of my 30+ gigs of music. If there isnt anything I can do, then Creative will never recieve my business again, and I have bought several players from them over the years, But this is outrageous.

I wish I could help you here, but wanted to ask you how your Touch listed tracks without a track tag in correct order before the firmware update? Mine did not do this before or after--listed anything without a track tag in alphabetical order. I have to assume you had to reload all your music after the firmware? I thought this was necessary as the player erased itself during the upgrade. Is it possible the tracks on your player were previously OK, but somehow the ones in your computer library got changed? This has happened to me. I really don't use MediaSource much at all, but Windows Media Player 0 has that "feature" where it will "correct tag info" from the internet. I found this kept changing my tags, sometimes to wrong info. I turned that "feature" off, as it was driving me crazy having WMP undo all my manual corrections all the time. When I rip a CD, I manually tell WMP to get the info from the internet. One of the crazy things was the "album artist" tag in WMP, which the Zen sees as "artist". I have many albums where the WMP database (forget which online one they use--Gracenote?) sees a whole bunch of "album artists" for one album by the same group. This really screws up the "artist" menu on a Zen Touch--you can't find anything! "Album" tag was OK, though, so it was fairly easy to group-select in WMP0 and retag---only to have WMP overwrite my correction shortly thereafter with the wrong info again. I wonder whether MediaSource does this, too. The reason I mention this is that there were a few times (before I figured this out) that my Zen Touch was fine and my computer library was all screwed up. If this happened to you, and you reloaded your Touch from a library with messed up tags, I can see how you would have a problem.

I get an message that the Aperture library has insufficient memory

I'm trying to import new photos into Aperture and it tells me there is insufficient memory in the library. I have loads of storage space - do I have to create a new library?

You are welcome.
Thanks for the help. So I find the Aperture library by searching with Finder?
If you did not move it from the default location your Aperture library is a package named "Aperture Library.aplibray" and is laocated in the "Pictures" folder in your Home folder.
If it is not there, search with Spotlight: Type ".aplibrary" into the search field and select "Show all in Finder" to reveal them.

How can I deactivate CS5 on a machine where the hard drive has corrupted and is no longer accessible?

My computer crashed yesterday in the middle of a project, my backup files are still available, but the drive is not accessible so I can't log into it to deactivate and put it on my new computer. I need help taking care of this!

Contact Web chat wit this link:
Serial number and activation support

App purchased in July then delete after finishing the game but now I try to redeem the app it has no memory of me paying for this app of £3 and wants me to pay for it again? What do I do?

Someone please tell me how to get the full app back without purchasing it again and having for pay £3 again?

Hi Hooper123456,
If you are having issues redownloading a previously purchased app, you may find the following article helpful:
Apple Support: Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Regards,
- Brenden

HAL firmware corrupted memory

Hi
Nothing is seriously wrong with my T430s but I receive regularly messages about platform firmware corrupting memory across system power transition.
Is this harmful? I ran a memory check and it didn't find anything wrong.

http://support.microsoft.com/kb/2028443
RESOLUTION: Contact your hardware vendor to obtain the updated firmware and BIOS to address this issue.

Does the new firmware,1.02.05 has M

Hey, i really want to know if the new firmware has MTP? And if i dont like, can I then go back to the 2.XX.XX firmware?
Is the new .02.05 firmware good?

It's brand new. Here's the description from the Downloads page:
Creative Zen Micro Firmware .02.05ZENM-FWPDE-2-LB
This web release enables you to upgrade the firmware for your , 4, 5 or 6GB Creative Zen Micro player.
You can upgrade from Creative Zen Micro firmware .0.03 or earlier, or Zen Micro PlaysForSure? firmware 2.00.2 or later. After upgrading, you cannot go back to a previous Creative Zen Micro firmware version.
It has been reported by some of our customers that they have experienced reduced battery life after charging their Zen Micro. Our product development team has researched these reports and determined that the users may have experienced this after they plugged their Zen Micro into the AC adapter that was already inserted into a wall socket with the AC power on.
While this is not the conventional way to plug in a player for charging, we wanted to ensure that our customers did not experience this problem, so we have developed a solution to address this, which simply involves upgrading the Zen Micro's firmware.
If you need assistance in doing this, please contact our customer support team and they will be happy to assist you.
Important: If you are upgrading from PlaysForSure firmware, be sure to back up all the audio and data files on your Zen Micro before installing this firmware update as all content will be lost when you install the new firmware. After installing the new firmware, use Creative MediaSource? to restore audio and/or data files to your player.
Enhancements
Improves the look of the volume control bar</LI>
Improves the appearance of the Lock icon</LI>
Adds a 4GB option in Removable Disk Mode (for 5 or 6GB players only)</LI>
Fixes
Prevents battery drain when the player is charged with an AC adapter already plugged into a li've power outlet</LI>
Restores proper functionality after disconnecting the power adaptor or transferring content using Zen Media Explorer</LI>
Redirects playback properly when skipping to the beginning of a WMA track</LI>
Requirements
Microsoft? Windows? XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition</LI>
USB port (2.0 or .)</LI>
Creative Zen Micro</LI>
Note
To install the new firmware in your Zen Micro
Download ZenMicro_PCFW_LB__02_05_PDE.exe.</LI>
Connect your player to your computer.</LI>
Double-click (filename).</LI>
Choose your language.</LI>
Click the Upgrade button and follow the instructions that appear.</LI>
To check your player's firmware version, see your Zen Micro User's Guide.

"Word has insufficient memory"

I have a master document which is made up of 10 individual documents created in Word 2003. admitedly, it's a huge file of about 20MB once loaded and consists of tables, numerous jpeg images, links, etc.
When I try to convert the file into PDF format using the "Convert to Adobe PDF" function, i'll get the
b "Word has insufficient memory. You will not be able to undo this action once it is completed. Do you want to continue?"
message.
It pauses and waits for my Yes/No answer before proceeding - rinse and repeat. This message will appear many, many times and it does not seem to make any difference at all when i answer yes or no.
I am aware that for a file of this size, the conversion time would run into the hours (I am OK with that). However, is there a way to get the pop-up message from repeatedly pausing and asking for my confirmation?
My computer specs:
Intel T2330 CPU 1.66GHz (does not exceed 10% of its capacity when converting)
1.5GB of RAM (when converting, only 700MB - 800MB is in use)
60GB HDD (~30GB in use)
WinXP SP2 (updated with the latest updates from microsoft)
Adobe Acrobat Standard 8
Microsoft Word 2003
any insight would be greatly appreciated. thank you!

Tagging causes a lot of bloat, but I am not sure why. Keep in mind that the conversion process first creates a PS file (not very memory conservative) before the final conversion to a PDF. That is probably where you are getting hung up. You should only use the features in PDF Maker that you really need. If you don't need them, then it is best to just print to the Adobe PDF printer.
Embedding the fonts in the PS file (an option) is also a potential memory issue that is not needed.

Since updating iBooks has corrupted my hotmail download??

As always I click email,if it has a PDFs attached,tap to download,tap it iBooks flashes up and stops downloa, please help,this is only on pad not iPhone????????

No i didn't want to just moan i couldn't post any more as my phone totally shut down again so have had to swap to my ipad. The problem i'm having is that the phone keeps totally shutting down from anywhere from 5 minutes to 13 hours then it will suddenly come back on and tell me the battery is almost dead when it is actually full. When it shuts down it shows the charge symbol but does not recognize the charger being connected. Have been told that the new update has corrupted all my software.

I have a HP LaserJet M4555h MFP, how do I know if my firmware is corrupt, is it in the event log?

Model of MFP = HP LaserJet M4555h MFP = CE738A
With fax accessory for HP LaserJet MFP Analog 500 = CE737A
Firmware Datecode = 20120623
Firmware Revision = 2200643_228339
The inital issue was receiving faxes, so I updated the firmware to the above listed. In the event log it shows since the firmware was updated on Nov 7th the following:
The device keeps prompting to restart the printer.... I haven't been able to screen capture the message off the device yet... on the Information tab through the EWS it's shown: "An unexpected error occurred. We apologize for the inconvenience. Please try again." What is that suppose to mean?
Faxing has stopped working completely....
Can you tell me if this means the firmware is corrupt and show be re-loaded?
Or suggest what my next steps would be?
Anything is helpful...Thanks HP Seeker.

Hello, you can also try a partial clean and reload the latest firmware, see if that will work.

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

Which Apple MacBook Pro has the most RAM and HDD memory?

I would like to know this because I plan on buying a MacBook Pro and I just want to make sure I'm buying the one with the most RAM and HDD memory and not some other one. Why do I need specifically this? Because I'm a gamer; I like playing games. I'm a watcher too; I like watching movies. Last but not least, I would like to sync my iPhone to a device that's from the same company. I don't know why, but I guess it's because I don't like uncoordination, or something like that. In short, I don't believe in "clashing". Even electronics.

The Hardware In Any Mac is Exactly the same as used in Any PC of like model year and included hardware. i7 being faster then an i5 CPU.
Apple uses the same exact Intel CPUs and Chipsets that all other computer use manfacturer today. There is No difference.
Ogelthorpe is comppletely correct that Windows, by nature of the OS, is better for running games and the hardware it comes on, by nature of the way they are manufactured even though it is the same hardware as in a Mac, is better for gaming because of the way they are cooled and the overall case design. More air vents and better air movement across the parts that get hot while gaming.
Mac notebooks on the other hand don't cool as well by nature of the air intake and exhaust systems. Both air intake and exhaust are at the screen hinge and the fans are designed to be quieter then on most Windows PC notebooks. Even if Windows is installed on Mac that Mac will run hotter then a PC with the same exact hardware configurations. This is a fact and experienced by many Mac users. Including myself.
Mac fans run all the time. From the second you start them up to the second they shut down completely. I personally don't know of any Windows PC notebook that do that. My Dell E6420 with the exact same CPU and more RAM, 16GBs in the Dell and 8 in my Mac, with the Dell having 2 drives, one a SSD the other a Spinner in the media bay, and the Mac having only one Seagate XT series in the main bay the Dell fans rarely come on unless I am taxing the system in some way. They are not on continuously and certainly not when I turn the system on. So Apple has designed the Mac to run the fans continuously to try and keep the system cool from the first power on.
So your statement is completely false. But it is what most people think even though it is unfounded.
ShaneBunting wrote:
This is not true. The hardware is simply better on a Mac. Even when running Windows on a Mac, you'll have a far better experience than on a PC..

TS1702 I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what wrong i

I have an iPhone 4 it won't let me download any apps I keep getting the message that my device has no memory left and I do have 1.9G left what's wrong as far as I know everything is up to date on the phone it is running slow please help thanx!

I figured out what was going on the app had miss represented how much space it would take it had said it was 1.2g's however it was really 1.9g's which was all I had left on the phone I downloaded it to my computer first from the apps store then was able to see this. At that point I was able to rearrange some memory to accomadate it's size thanx for the help.
Mick

The platform firmware has corrupted memory across

Similar Messages

Maybe you are looking for