The possibility to hide for displaying a user status in work order
Hello gurus,
I have following issue:
It is possible to hide only for displaying a user status in a work order when it's active?
br,
Laurentiu
See my [recent post|https://forums.sdn.sap.com/click.jspa?searchID=25309331&messageID=7376021] which references user-exit STATTEXT.
PeteA
Similar Messages
-
LSMW for changing user status on work order(IW32)
Hi All,
I have created a LSMW for changing user status on work order using transaction IW32. It does not change the status when i run the LSMW. In the recording for the LSMW, i select the radio button on the user status i want to select.
When i run the LSMW in the foreground, it does everything except select the correct status.
Is there a way to fix this or is it a problem with LSMW. I'm using ECC6
Kind Regards
EmanuelHi ,
I am not sure whether it would work with LSMW but if your on ECC 6.00 ,Enhacement Pack 3 then you have BADIs which allow you to make collective status changes in IW38 .The below are those BADIs :-
BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
Else if your on lower version then write up a batch programme which checks the PM Order types with specific status and sets user status using FM STATUS_CHANGE_EXTERN[This is used to set or delete User Status] in SE37 ..
regrds
pushpa -
How to install the Oracle ODBC driver for all NT users
I need to schedule a task on a SQL server running on NT to access an Oracle DB.
I have installed the Oracle ODBC driver on it and it is working well under my NT account.
But the SQL scheduler runs on another NT account and the task failed.
How is it possible to install the Oracle ODBC Driver for all NT users ???
Thanks for your inputs...http://forum.java.sun.com/thread.jsp?forum=48&thread=187964&start=0&range=15#608968
The above link is a comprehensive "How to get set up and on my way" that I made for someone else learning Oracle/jdbc. Kind of a self-help resource page. I would start from the beginning and download the newest drivers, then set up your environment,...etc.
hope this helped,
Jamie -
What is new from the update 5.0 for Iphone 4 users?
what is new from the update 5.0 for Iphone 4 users?
Click......
what is new from the update 5.0 for iphone 4 users? -
How can I set the default home page for all new users in Firefox 4
I'm trying to deploy FF 4.0rc1 in a corporate environment but I can't find a way to set the default home page or any other settings for that matter.
Is there a way to set the default home page for all new users and lock it so that the users can't change home page?
Best regards
JonasIn Firefox 4 the template folder for new profiles (C:\Program Files\Mozilla Firefox\defaults\profile\
) doesn't exist. You can create that \defaults\profile\ folder and place a file user.js in it with the prefs that you want to initialize.
See:
*http://www-archive.mozilla.org/catalog/end-user/customizing/briefprefs.html
You can also use a mozilla.cfg file to set the default value for prefs.<br />
See: http://kb.mozillazine.org/Locking_preferences
defaultPref(); // set new default value
pref(); // set pref, but allow changes
lockPref(); // lock pref, disallow changes -
How to change the UWL refresh rate for all portal users.
Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.1. Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
From the Universal Worklist Systems, choose the system for which you want to edit the properties.
Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju -
What are the possible cost objects for raw material consumption postings
what are the possible cost objects for raw material consumption postings. i want to know whether it can be work order(maintenance order).
For example, you are confirming a process order and issuing raw materials to the process order, the system in the background creates the consumption posting and will by default use the process order as a cost object.
Similarly, when you are issuing materials to a work order, you will use MB1A and with movement type 261 and the system prompts you to enter the order number. If you are using movement type 201, then the system prompts you to enter the cost center and so on.
Thanks,
Madhav Nanduri -
PM Order Display Double User Status
Dear PM Gurus,
In PM we have define User Status for our Approval process, were a certain status must be set before the other can be set until to the last User Status which are about 10 user status that must be set before the order can be approved.
The problem we have is that for some other reason one PM Order on the User Status display field displays two user status, and when accessing the PM Order for any changes the system give a termination error "While preparing the screen**
**"SAPLBSVA" 0302 for screen display, it was detected that in a group of radio buttons, there is more than one field set.
Your assistance in the regard will be highly appreciated.
Thanks
Elphaas Mgiba u2013 SAP PM SpecialistDear All,
This problem has been fixed, actually the is a SAP Note that can be implimented to solve this problem.
Below see the SAP Notes details:
SAP Note 371659
SAP Report ZSTSEQNR
This report will enable you to select a statuses that you would like to delete.
Thanks,
Elphaas
Edited by: Elphaas on Jun 23, 2010 3:22 PM -
Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.
you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html -
Remove the user status in Sales order
how to remove the user status in sales order header? could you give the function module or BAPI to get this?
Hi,
You Can try this-
BAPI_SALESORDER_CHANGE,
FM 'I_CHANGE_STATUS'
Regards,
Sujit -
After purchasing the Photoshop cs6 update for my Mac, the download page says for "Windows". Will this still work? How do I get the right download without purchasing again?
no.
you need the update for a mac, not windows.
Product updates -
I downloaded the latest operating system for my iPhone 5. It worked fine for about two minutes then the phone requested a password number to continue. Each time I inserted numbers, which were incorrect, the phone would lock up for a certain period of time. Now, it says “iPhone is Disabled”. It said to “Connect to iTunes” which I did, but iTunes does not recognize my phone. If I scroll the face to the right, it goes to the phone number face and says, "No Service". Can I do something to make the phone work?
Forgot passcode for your iPhone, iPad, or iPod touch, or ...
-
Set User status of Maintenance order
Dear All ,
I m trying to update the user status of Maintenance order via a report .I m using the BAPI "BAPI_ISUSMORDER_USERSTATUSSET" for it.
Code details are as follows :
USR_STATUS-STATUS_INT = 'E0006' "TJ30T-ESTAT
USR_STATUS-STATUS_EXT = 'WIPR' "TJ30T-TXT04
USR_STATUS-LANGU = 'EN'.
CALL FUNCTION 'BAPI_ISUSMORDER_USERSTATUSSET'
EXPORTING
NUMBER = WA_FINAL-AUFNR
STATUS = USR_STATUS
INACTIVE = 'X'
IMPORTING
RETURN = WA_RETURN.
Bapi is executing successfully but it is not updating the status when I check it from IW33 .
Suggest me for it....
Thanks
AlokThanks SARAVANAN ,
I have done the bapi commit . But it have some other problem and now I have done it.
Thanks for ur suggestion. -
Function Module for TECO(technically complete) a maintenance work order
Hi,
Please let me know if there is any FM for TECO(technically complete) a maintenance work order.
Regards,
VimalIs there any BAPI for the same as the FM STATUS_CHANGE_INTERN is doing TECO without considering other statuses which need to be done.
I do technically complete in IW32 by going to ORDER-FUNCTIONS-Complete-Complete(Technically ). Once done Complete(Technically ) will be inactive and Cancel technical Completion will become active. But when i use this FM it does the teco but when i go to ORDER-FUNCTIONS-Complete-Complete(Technically ) it gives me following status information--System Status TECO is active. Also Complete(Technically ) remains active.
Please help.
Regards,
Vimal
Edited by: Vimal kumar on Sep 16, 2008 11:10 AM -
Chance user status in sales order VA02
hi all,
have any FM or BAPI is available to change (block / release) the user status in sales order change,
pls note me about this,
Regards
UsmanHi Aditya,
thanks,,
which table and which field need to import in this FM "BAPI_SALESORDER_CHANGE" to change User status (Release / Block) in Sales order.
Regards
Usman
Maybe you are looking for
-
Hi All Scenario 1. Purchase order quantity 9 units 2. GR done for 8.999 Units 3. Stock in transit showing 0.001 units. 4. Purchase order is still open and cannot do DC as it throws an error that quantity does not match 5. Purchase order is still open
-
My original apple id is not an email address . I bought iCloud memory via that same account no problem. When setting up iCloud on iPad you cannot have a primary iCloud account unless it has an email address . Made new account as per instruction ie [e
-
Add pricing condition within order created with reference to SPA
Hi, I have a requirement wherein I need to add a $50 fine to order if the total order weight is below 75 kg. Problem I am facing is with orders created with reference to SPA wherin pricing is not calculated but copied from SPA. Please help me in solv
-
OS 9 & OS X not playing well tofether
Hi! I'm having a problem with OS X and OS 9.2.2 cohabitating on my computer. Here's what I've done so far: I have 5 drives on my computer: 1) Dedicated to OS 9.2.2; 2) Backup for OS 9.2.2 (cannot boot from this drive; it has replaced the Zip drive on
-
Does Verizon plan to expand non-English language channels?
I came to Ventura County from San Francisco Bay Area where Comcast has more channels in the basic packages. I like many Americans like to watch shows from other cultures asI find them interesting. I recall two in particular, KTNC (Comcast San Jose Ch