The power button and the volume buttons don't work

The power button ant the volume buttons don't work. I've tried to restore a previous version and doesn't work.
I use iOs 5.
Thanks

If you did not restore to factory defaults/new iPod try that.  If you still have a problem after that then you likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Similar Messages

  • I updated to the latest IOS and now my passwords don't work.  Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

    I updated to the latest IOS and now my passwords don't work.  Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?

    This may sound crazy, but download any free app.  This often "shocks" the other apps into working.

  • Has there been trouble with the charger.  I am getting to re-order but the one i had the had the power surge and the end was blackened.  Not sure if it safe to use the laptop again?

    Has there been any trouble with the charger?  I am getting ready to re-order but the one i had.... the had the power surge and the end was blackened.  Not sure if it safe to use the laptop again?  Thanks.

    Can you also see blackening in the power jack on the PowerBook? If so, I would be worried that the surge also damaged the computer/
    Does the computer run OK on just the battery? If it is working on battery power, that limits the number of things inside the computer that could have been fried.
    If the computer is severely damaged by the surge, it's not worth repairing. However, a couple of posters in Apple forums said their homeowners'/renters' insurance paid them replacement value of their computer after power surge damage due to known problems on the grid, like the huge power outage that hit the SW Untied Stats and part of Mexico yesterday.

  • My ipad is frozen with an image of the power plulg and the itunes logo.  When I restart or reset it comes back to this screen and I can't get it to move anywhere else.  Any ideas?

    My ipad is frozen with an image of the power plug and the itunes logo.  It won't move off this screen even if I restart/reset it. 

    marloyee wrote:
    ... if i am going to restore my device to factory settings, application data will be lost ...
    To minimise loss... Once you have Reovered your Device...
    Restore from the most Recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • Mute button, low volume button and high volume button not working after upgrade to Win7 Pro

    Hi all, Im using X301. Previously it was shipped with the Vista Business. I was entitled for free upgrade to Win7 since the thinkpad was bought after 25th of June 09. The problem started after I successfully upgraded my Vista to Win7 Pro. My Mute/Unmute button was consistently in amber colour (signal for disabled). the volume button also is not working anymore. On the system side, everything was fine. the drivers is working properly.. the windows also is showing the volume is in a good shape. Unfortunately the button on the thinkpad is always on the disabled mode. Ive been searching for a related drivers that i could download and solve the issue. but till now all the softwares and drivers downloaded from lenovo could not solve my problem. any suggestion or comment is highly appreciated. thanks a million

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:       
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    When iOS 6.1 comes out I would update.

  • HT1414 iPod Touch has a blank white screen and the computer does not recognise it. I have tried pressing the Home button and Up Volume button and Off button to no avail. Thank you

    I tried to download an upgrade that was recommended by APPLE, the upgrade stopped halfway through and the iPod Touch was turned off, now the iPod Touch has a BLANK WHITE SCREEN and is UNRESPONSIVE to the COMPUTER
    I wonder if anyone can help
    Thank you
    Brizey

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • Lenovo T500 problems with Fnf3, Fnf6, brightness button and mute/volume buttons

    I have done a clean install of Windows 7 and installed the hotkey driver as well as the system inter driver but these buttons are still not working. 
    The only ones that are slightly working is the brightness and volume buttons (excluding the mute which isn't working at all) but I am not getting OSD indication like I did in Vista.
    Is it possible to fix this problem?
    Thank you
    -Zac

    Of the drivers you mention I have the following installed:
    - ThinkPad Power Management Driver (6hku06ww)
    - Power Manager (7zu413ww)
    - Lenovo Fingerprint Software UPEK (6hf309ww)
    They appear to work well apart from switching the built in CD player on after a power down. I now have to manually eject and reinsert the CD driver to switch it on.
    On My T400s I only have discreet graphics. The built in drivers for WIn 7 worked but I downloaded Intels Win 7 graphics drivers from their site.
    You might also want to install the UltraNav driver and Utility.
    The drivers seem stable and (mostly) working as they should so I would recommend you install them.
    Mats
    Thinkpad T400s, X61s, X41, 600

  • Lock button and lower volume button not working.

    Any advice if a button stops working? I don't know why either

    Did you try resetting/rebooting the iPad by holding down on the lock and home buttons at the same time until the Apple Logo appears on the screen. I realize that involves using the lock/sleep button, but if it is a software issue, it might help. Give it a try.
    Without knowing more about the problem, your next step might be resetting all settings and then restore the iOS software after that. If those fail to help, then a trip to an Apple Store should be the next step for you.
    It could be a hardware issue and since both buttons are on the right side of the iPad, there might be some connection between the two buttons that is causing the problem.

  • One of the connector pins on both the power cord and the magport are burned

    Has anyone ever encountered this problem?
    We have to constantly jiggle and work with the powercord to be able to get it to charge the book and it would seem that our battery/power seems to be hotter than it has been since we bought the macbook.
    Just wondering if anyone has an experience with this issue.

    Both a friend and myself have had the same problem on first gen MBPs. I'm getting the adaptor replaced today - it is obviously discolored and melting at the power connector

  • HT201263 my ipod screen turned white and i seen online that you hold the power button and the homescreen button for it to go off. But it wont turn back on. I would have to let it die and charge it it turns on but fades to white. what do i do?

    My ipod screen turned white. i had read online that if i hold the power buton and the home button that it would turn off. It turned off but wouldnt turn back on. I had left the ipod on the charger all night and tryed this morning. nothing would happen. but when i checked it this afternoon the battery was dead. when ever i turn it on the password screen fades to white. what do i do. My warrenty just ended a week ago.

    Try here:
    iOS: Not responding or does not turn on
    Also try letting the battery fully drain. After charging for at least an hour try again.
    If not successful time for an appointment a the Genius Bar of an Apple store.

  • I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

    I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

    do u have your ipad doing airplay because that could happen

  • My macbook froze and i pressed the power button and the OSX utilities appeared

    My macbook froze and i pressed the power button and the OSX utilities appeared .. i don't know if my things got erased or what does it mean and what should i do ? it doesn't let me click out of it or anything. the options are to restore fro time machine, reinstall OSX get help online and disk utility ,, how can i do to not erase anything i do not have an external memory or anything. PLEASE HELP

    Hi there. If you have 10.9 Maverick you can get in recovery mode By using /command r Option R or Option. Then you came click on the link to go to disk utilities and repair your disk or do a reinstall of you operating system. I think the screen you are seeing is the recovery screen. Here is a hot of what it looks like. You will have to scroll down a little to see it.http://osxdaily.com/2013/11/05/downgrade-from-os-x-mavericks/   http://support.apple.com/en-us/HT4718  This link tells you what you can do.

  • I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring?

    I was recently updating my phone to the newest software after ios7. It froze for quite a while so I tried holding down the home button and the power button and it shut off. Now it says I have to restore my whole phone but an Error keeps occurring? It brings me to a website saying the steps to possibly fix it but I don't find them helpful

    http://support.apple.com/kb/TS1275

  • So my daughter's ipad2 wont start up or its starting up and we just cant see it??? when i hold down the home button and the power button the apple icon comes on then goes away,the only way to see the screen is when you takescreenshot?????any answers????

    so my daughter's ipad2 wont start up i think its on but you cant see anything unless you take a screenshot then you can see for a split second then nothing,and when i hold down the home button and the power button it will reset then i can see apple icon for a second then nothing?????

    Thanks for that information!
    I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
    In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
    When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
    Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

  • TS3694 Why does my ipod keeps powering off, and when I turned if on, I have to press down the power button and the screen button at the same time ???

    Why does my ipod keeps powering off, when I have to turn it on ... I have to press on the power button and the screen button at the same time ??? over and over again. I just got this in December 2011 as a gift.

    I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

  • My Ipod touch wont turn on.  I tried to hold down the home button and the power button, but that didn't work.  Any other suggestions?

    My Ipod touch won't turn on.  I tried holding down the home button and the power button.  Any suggestions?

    I had the same problem a few weeks ago, I tried pressing and holding the Sleep/Wake button and the Home button at the same time
    After about 5 seconds, it seem to start up again
    If all else fails, have you tried to take it in to the apple store? The customer service there is always really friendly and helpful
    ... just don't panic, I'm sure it will be fine

Maybe you are looking for

  • Home Server 2011 Stopped Working

    Hey there. I work with a windows Home Server 2011 and recently it wasn't accessing a certain report that I need. I restarted it to see if that would fix it. When it restarted, it went through the Windows loading screen, then went to a black screen. I

  • Gx620 HDMI higher refresh rates

    Hello, I've bought a Samsung SyncMaster 2233rz to get a lower inputlag and higher refresh rates. GeForce 9600m GT doesn't have a DVI-D port, thus I'm using the HDMI port with a DVI-D adapter as the monitor only has a DVI-D port. I've read you couldn'

  • The difference in calling an application module from a backing bean

    Hello everybody! I don't understand exactly, where is the difference in calling an application module from a backing bean in the following ways. Example 1 FacesContext context = FacesContext.getCurrentInstance(); ValueBinding vb = context.getApplicat

  • Installing printers via GPO

    Hi guys, I'm trying to deploy a printer using a GPO and I wonder what's the difference between deploying "USER|Computer\Policies\Windows Settings\Printer connections" and "USER|Computer\Preferences\Control Panel Settings\Printers" By the way, my coll

  • IPhoto Printing Services from pdf format?

    I created a book in iPhoto 08 but it was deleted accidentally. I have Time Machine, but the the book under Project does not show up at all. Fortunately, i have printed out a pdf version. Can I send the pdf to Apple to order the printing of photo book