The power button is not working on my iPhone 4s.

On my iPhone 4s the power button stuch, how can i fix it. i am based in Bangalore, India. And for this week i will be at Sydney, Australia.
Please let me know how can i fix the same.
Thanks, Paddy

If it's physically stuck it might be best to bring it into the Apple store at George Street Sydney.
Set up an appointment with the Apple store via the website http://www.apple.com/au/support/contact/

Similar Messages

Is there anyway to power off an I-phone 4s if the power button is not working?

Is there anyway to power off the phone if the power button is not working?

Assistive Touch. Tap Settings App > General > Accessibility > Assistive Touch > ON > at bottom of screen tap button > Device > press and hold Lock Screen icon > when slide to power off appears > slide it. To turn iPhone ON connect to Power Source with USB cable, charger or USB port of computer.
All iPhone 4S have full Warranty Coverage. Make Genius Reservation and take iPhone to Apple for resolution.

My ipad has a black screen and the power button is not working. Help!

This is the second time my ipad screen has gone black. The power button is not working. I reset the ipad about two weeks ago when this happened. However, this time I am not able to get itunes to recognize the device. It keeps asking to respond from the ipad (obviously with a black screen that isn't going to happen). Im not sure what to try next...thoughts?

Have you tried to give it a reset?
Reset
Hold down the sleep and home keys for about 20 seconds. When you see the silver apple, let go and let it reboot. No data will be lost.

The home button is not working on my iphone 5 - is there a way to troubleshoot that issue?

the home button is not working on my iphone 5, its does click and acts normal but doe not do what it is supposed to do

You have identified the problem. If you have Warranty or AppleCare coverage, make Genius reservation and take or send to Apple for resolution. Troubleshoot. When iPhone 5 is open, the home button contacts are present right there. With volt meter placed on home flex you can see if pressing home button completes the circuit. You can bridge the dock home button contacts and see if it actually causes response in the iPhone. If not dock or its contacts are faulty or logic board is faulty.

TS3682 The home button is not working on my iPhone 4? How do I fix it

The home button is not working on my iPhone 4? How do I fix this problem?

Make a Genius Bar appointment at your nearest Apple Store and do an out of warranty replacement for $149 USD, or use a third party repair site such as http://www.iresq.com, or replace it yourself, http://www.ifixit.com.

How can i restart my phone if the power button is not working?

My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
Also, I use the on-screen assistance icon but it does not have a power off option.

demeece wrote:
My power button is not working and my phone freezes every now and them. I read I should restart it. Is there another way to restart it without using the power button?
Also, I use the on-screen assistance icon but it does not have a power off option.
That's correct. Because how would you turn it back on again if the screen was off and your power button was on the screen?
Yo need to fix the button, or try letting the iPhone die out completely, then connect it to power and after it's charged for a while, see what happens when you press the Home button.

The power button does not work

i recently noticed that my original iphone power button does not work i push but nothing happens. I know that i have to fix but the problems is that the warranty is been over for long i need to know a good place to repair because the apple people said they could not fix it. I live in Texas so somewhere close would be nice.

This link is for one 3rd party repair service you can contact for the first generation iPhone and for the iPhone 3G, which is located in Dallas.
http://www.drcellphone.com/iphone-repair-service.php
http://www.drcellphone.com/iphone2g.php

I have i phone 4 from verizon and the power button is not working

I have i phone 4 from verizon and the power button isn't working anymore, I bought my i phone 8 months ago.
What options do I have and what should I do ?

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Is there a way to do a soft reset when the power button does not work?

After needing to enact my replacement repair warranty, I received a device (smae one and same serial) but the screen had unresponsive spoots, and dim spots, I decided to turn right around and send it back again. I got a replaced screen again, but this time my power button doesn't work. Now, this isn't too inconvenient for me except that I cant do a soft reset or power off/on in order to clear the cobwebs from time to time. Does anyone know of an app, or another way to do this? I'm simply afraaid of what iddues it may come back with if I send it in a 4th time.
So, App?
Or, maybe a special keybaord combo I can put in like on phones? (IE ##XXXXX#

To remove the Restrictions passcode, you need to restore the phone as a new device using iTunes. Hit the "Restore" button on the Summary Pane.

HT2213 Holding the power button does not work

I've got a Mac Pro that stops recognizing my BD-ROM drive after it goes to sleep. I've been trying to reset the PRAM and NVRAM, per applecare's suggestion, but everytime I plug my Mac Pro in, it automatically starts up. I've turned off the "automatically restart" option in System Preferences, but it's as if all of that is stuck! So, I'm trying to reset the firmware using the firmware restoration CD, but when I hold down the "power" button, the computer's LED light flashes much more than three times, the computer gives a non-chime beep, then gives the chime, and then starts up using the Macintosh HD like I'm not holding down the power button.
Is there another way to get to the point where I can use the firmware restortaion CD? It's driving me crazy. I thought it was because I was plugged into an Uninteruptable Power Supply, but I plugged it into a normal power strip and there was no change.
Any help?

the computer's LED light flashes much more than three times, the computer gives a non-chime beep, then gives the chime, and then starts up
Here's the meaing of the POST chime sequences:
Power On Self-Test Beep Definition - Part 2
As for the power led, if it is a sequence of single flashes that none of the ram is being detected. If grouped in a sequence of 3 flashes then a single slot has failed.
Look inside your machine for any lit diagnostic leds.
Blow out any accumulated dust.
Reseat the video card.
I do not think firmware needs to be changed/updated/reinstalled.

Hi my macbook just one day decided that the power button will not work despite full battery power Please can anybody help me thank you so very much

please if anybody can help me i would give you a very very big hug but :i will sat to yiu I thamk yiu very much to take your time to help me yes
Muitos Beijos and Obrigado
Issy

First begin by resetting the SMC (system management controller) on your macbook as shown here: http://support.apple.com/kb/HT3964
Have you recently changed any hardware ? May there have been any condensation that found it's way on the greater area of the keyboard and specifically near the power button ? Have you tried pressing the area directly near the said button and then pressing the power button itself simultaneously with the possibility the contact may have gone haywire ?
Good luck.

HT1212 i have a problem, my iphone is disabled and i can not get into it. the power button does not work and the computer i used before i do not have. icloud was not set up on it either. And it will not allow me to connect to my itunes. So what can i do t

i have read ur forgotten password or device disabled after entering wrong password. iphone is desabled dont have computer i conected it to before and power button is broke so how can i get back into my iphone?

You will have to restore the phone and set up as New. See: http://support.apple.com/kb/HT1212. The part you need is near the bottom, "If you have never synced your device with iTunes...". You will lose any content that is not backed up in iCloud.

My iPhone's flash wont turn off and the Power button is not working

Ealier today, my iPhone got wet from the rain, my camera started to malfuction and the flash or the LED light stayed on throughout the whole afternoon. I couldn't turn it off and it just ran out of battery.

If your power button is broken, there's not much you can do. You could go to an Apple store & do an out of warranty exchange...Apple doesn't fix iPhones, they replace them. But, I wouldn't recommend doing so, as the iPhone 3G was discontinued almost three years ago & won't run most apps in the app store.
You'd be better served by selling it for parts & using the money to purchase a new phone.

The home button is not working on my iPhone 4

My home button has not been working for ages. It works about once every 10 clicks. It feels like it has something stuck under it. Please help! It is really annoying.

Method 1: Calibrate (and possibly restore)
If you're lucky, your slow-to-respond home button is due to a software glitch. To find out, you'll need to calibrate your home button. Here's how:
Open up a stock app, like the Clock. Hold down the sleep button until "Slide to power off" appears. When it does, let go of the sleep button and hold down the home button. After about 5-10 seconds, the app will close.
If this solved your problem, you are one lucky iPhone owner. If it didn't you may want to try restoring your iPhone before continuing to the second method.
Method 2: Realign the docking port
There is a chance that through normal wear and tear, your phone's docking port got misaligned, moving the home button along with it. Although a repair shop might suggest you replace the home button, this YouTuber offered a different solution.
Plug a USB cable into your iPhone. Then, gently push down on the 30-pin connector, so that it pushes up behind the home button. While you apply the pressure, click the home button. Remove the cable, and see if that fixed the problem.
Method 3: Clean the home button
A splash of soda, sticky hands, dirt in the bottom of your purse or pocket -- any of these things can damage your iPhone's home button.
For this fix, you'll need 98-99 percent isopropyl alcohol, which can be found at hardware stores. Using a cotton swab, eye dropper, or tissue, apply 2-3 drops of the isopropyl alcohol directly to the home button, avoiding the screen. Then, with a narrow, dull object (like the eraser on the back of a pencil), repeatedly tap the home button so that the alcohol seeps into the frame.
Wipe clean, and wait about 10-15 minutes before checking to see if that did the trick.
Method 4: Enable the on-screen home button
If the previous three methods did not work, it sounds like perhaps you have a completely defunct home button. In this case, your home button's connectors may have been misaligned and would require professional repair. (Or, if you're willing to brave it, iFixit shows you how to DIY.)
The good news is, you can still use your phone using its on-screen home button. Normally, this is used as an accessibility option, but it's also a common solution for those with non-functioning home buttons.
To enable the on-screen home button, go to Settings > General > Accessibility > Assistive Touch. Turn Assistive Touch on, and you'll see a small circle appear on screen.
Tapping that circle gives you four options: Home, Siri, More (for things like multitasking and playback controls), and Favorites. In your case, ignore Favorites, but tap this on-screen button whenever you need to access your home screen, activate Siri, or get all the options you'd normally see when you double-tap the home button.
If the on-screen home button ever gets in the way, simply tap and hold to drag it anywhere else along the frame of your screen.
It's hardly an ideal solution, but it'll hold you over until you're ready to purchase a new phone or get your current one fixed.
Youtbe: http://www.youtube.com/watch?feature=player_embedded&v=cflsmFSdcmI
Refer to Apple Support Page too! http://support.apple.com/kb/ht1414
All the best

Froze on black screen and power button does not work

my sons ipod touch is stuck on a black screen when plugged into the computer got a spinning wheel and will not connect now spinning wheel will not go away the power button does not work so can not reset it manually
any suggestions would be appreciated

- iOS: Not responding or does not turn on
Neglect the reset and when it says place the iPod in recovery mode use one of thes programs
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The power button is not working on my iPhone 4s.

Similar Messages

Maybe you are looking for