The power went out while installing the software update..!

The power went out while installing the new Apple TV software update..! Now the LED flashes all the time, shows the apple logo and never boots.

I've already tried to restart with no result. I bought the microUSB cable and iTunes recognized it. I restored the firmware with success but when i disconect the usb cable the AppleTV is dead. It doesn't respond (LED is off) when i connect the power or when i use the remote. Now the LED flashes only when i connect it with the microUSB cable. I tried several times to restore the firmware with success but when i disconnect the microUSB, AppleTV seems dead.

Similar Messages

The power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!

the power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!

bechosken wrote:
My friend wanted to get some music off my itunes
This is called "stealing". You do not have the legal right to give her the music you have in your iTunes library unless you are the copyright holder.
when syncing it it said she had to update her phone software first
That's not quite what it said. Someone should have paid more attention to the great big warning about the possibility of losing data if the phone wasn't backed up.
We cannot find her new photos. Please help and there was 100 new pics. Is there any way we can get them back. I already have the program Asoftech - but it doesnt seem to register the iphone only C and D drive. Please help!
It restored the backup that was made on your computer 6 months ago, which did not contain those photos. You're wasting your time trying to find them on the phone. They don't exist.
Hopefully, your friend syncs her phone to her own computer on a regular basis. She needs to plug her phone into her computer and restore it from her last backup. That will restore it to the state it was in when the backup was made.
She also needs to get in the habit of extracting the photos on a regular basis, like she would from any other digital camera.

The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password. I have an HP laptop

The power went out and when it returned the network name and password was lost. I can see the network in my connections and connect to it. How do I get it back to the orginal name and password? I have an HP laptop.

Chances are, there was a signficant power surge or voltage fluctuation just before the power went out. This type of thing can cause the AirPort Extreme to reset back to default settings.
If this occurs, your only option is re-configure the device again, just as you did originally.
In order to improve your chances this next time this happens, (especially if you live in an area where thunderstorms are severe), a good quality surge suppressor / voltage limiting power strip will really help, and may save you the entire device or a nearby computer next time something like this occurs.

My light is flashing on my apple tv after the power went out how do i fix the problem

my light is flashing on my apple tv the power went out then when it came back on it began flossing what do i do

See Apple TV: About the status light - Apple Support

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit

Trying to update iTunes and I get the error - "errors occured while installing the updates. If the problem persists, choose Tools > Download only and try installing manually". Currently on version 10.5.3.3 trying to update to 11.0.2 on a Windows 7 64-bit.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

The power went off while my Apple TV was updating. Now it won't do anything but blink fast at me. Anyone know what to do from here?

Power whent down whils my Apple TV was updating. I get no signal and its blinking rapidly. Anyone know what to do from here?

Due to the power outage the update was unable to be applied properly. You will need to grab a micro usb cable and restore via iTunes.
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Electricity went out while in the middle of linksys WRT300N Firmware update!

hi, i was updating my firmware to the latest one and i hit go... 60% into the process the houses power went off then on .. and powered off the router .. now it dosnt work .. helpppp!!!!

well...the interruption in the firmware upgrade might damage the router ... you can try resetting the router for a minute...do a power cycle and check whether you can upgrade it again ...

I think that I no have luck. My mac has many problems: the source burnt, the keyboard went out of order , the screen is full of spots and the last one was the battery which is no charging anymore. I am already spent a lot of money to get the mac in order

I am really disapointed with my MacBook Air. I bought it around two years ago and every three months I need to do something to fix it. First was my source, it did not work and need to buy a new one after searched in 5 shops in Brasília/ Brazil. After this was the screen, full of waves and dark spots. Next was the keyboard which went out of order and I need to change by a new one (20 days waiting for the service in Goiânia/Brazil). Now was the battery, which is not charging! And the support told me to change and more 20 days waiting for the repair. When I bought my first Mac I really think that I never have so many problems. Anyone has the same issues?
Best
Janine

Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you.

Error 1904 while installing "nokia software update...

Hi, i've just downloaded the new nokia software updater v.1.4.70en but while im trying to install it shows me an error saying :
" Error 1904.Module C:\Program Files\Common Files\Nokia\Tss\Communication API\cmn_usbdcm.dll failed to register. HRESULT -2147220473. Contact your support personnel" and another " Error 1904.Module C:\Program Files\Common Files\Nokia\Tss\Communication API\dtl.dll failed to register. HRESULT -2147220473. Contact your support personnel.".
I put ok and it continues the installation and then it finish.
But the problem is that if i go to the nokia software updater it does not find my phone! Im working on my windows xp sp2 laptop. I also tried on my windows vista laptop and it gave me the same errors! I have no firewalls or antiviruses to block anything! if somebody can help me i would be very gratfull!
I have an nokia E90 V.07.24.0.3 and i want to update it to the last firmware!
Thank you, Olivier!

I have just encountered the same/similar problem and spent an age trying to find a solution both here and through Google with no success. The good news is that after a bit of trial & error I have managed to resolve the issue with a very simple workaround
When installing NSU, continue through the installation until presented with the error message.
Here, grab a pen and paper and note down the full path of the .DLL causing the problem.
Now continue to install (ignoring the error) by clicking on the right arrow.
Once insallation is complete, open the start menu and select 'Run'
Here you need to type "regsvr32" (without quotation marks) followed by a space then the full path of the file you have noted from the error message. (Note - the path should be in quotation marks). As an example, below is exactly what I typed to resolve my issue
regsvr32 "C:\Program Files\Common Files\Nokia\Tss\ProductApiLoader\ta_productapiloader.dll"
Now open NSU and update your handset.
Good luck and remember to feed back your results on this thread for the benefit of others.

Error while installing Device Software Update usin...

I have installed Nokia Suite 3.2.100 on my Win XP-SP3 machine.
Upon signing in, Nokia Suite indicated that I have an update available for my device (Nokia N8-00 running Symbian Anna, Type RM-596).
The application available for update was Nokia Maps - with enhanced Drive navigation ver. 3.8.105.
When I tried to install, I get the following error message : "Something's Gone Wrong - There was a problem with the software update service".
The error message further suggests that if the problem persists, I should uninstall Nokia Suite and and download the latest version.
Nokia Suite is otherwise working perfectly fine for me and I believe ver 3.2.100 is the latest version.
Do I still need to uninstall Nokia Suite and reinstall again. Could you please help me with this.
Thanks and regards.

3.2.100 is the latest, so you cannot update it. Are you able to see the same app on your phone update section? You can also try from there.
If the problem still occurs with some other app, you can try to repair the Nokia Suite and PC connectivity solution installation from Programs list of Windows.

Power went out and now spinning ball of death

This morning the power went out while I had been working in InDesign and Illustrator. I came in and saved the project before the back up power went out but did not get the Mac powered off completely before the back up stopped. When the power came back on, I restarted the mac and Indesign, and my project is now constantly getting the spinning ball of death; I can't even recover it anymore in Indesign (I can open the file, but the recovery was lost). ALL other programs are fine. Just indesign.
I went to look for help online and found a recommendation to turn everything off, unplug mac, let it rest then hold the power button down and replug the power then power the mac back on, and now my fan is running at super high speed and I still am having huge problems with InDesign. 1) can you tell me how to get the fan back to the way it was and 2) what do I do about spinny rainbow ball in Indesign.
HELP!!!!!

Welcome to the Apple Support Communities
For the fans issue, first reset the SMC > http://support.apple.com/kb/HT3964 If it doesn't work, it's possible that the computer has a hardware problem.
Apart from that, it's possible that your hard disk got damaged because of the power outage. To check if it's OK, open Disk Utility (it's in /Applications/Utilities), choose "Macintosh HD" in the sidebar and verify the disk. If it shows a problem, start in OS X Recovery (hold Command and R keys while your computer is starting), open Disk Utility and repair the Macintosh HD partition. If it couldn't be repaired, the hard disk has to be replaced

I WAS USING IPHOTO AND MY POWER WENT OUT. WHEN I TURNED THE IMAC ON I COULD NOT OPEN IPHOTO! JUST KEEPS AKING TO RELAUNCH. TRIED TO PUT RECOVEERIND DISC IN BUT STILL NOTHING!

I WAS USING IPHOTO AND THE POWER WENT OUT. WHEN I TURNED IMAC BACK ON IPHOTO WOULD NOT OPEN, JUST KEPT ASKING TO RELAUNCH. NOTHING HAPPENS WHEN I RELAUNCH. I TRIED PUTTING THE RECOVERING DISCS IN BUT STILL WON'T OPEN!

It also broke your cap lock. You need to get your keyboard fixed as it makes reading your posts extremely difficult and is considered shouting which is rude
You need to load your back up or make a temp backup and rebuild your library
LN

How to fix everything when power goes out during install? [SOLVED]

last night I was installing kde and during the install process the power went out. I tried uninstalling kde, but pacman said dependencies were missing (I need dependencies to remove stuff?), so I tried reinstalling the kde group and that seems to have worked.
What is the best way to recover from something like this and how can I be sure everything is now fixed?
Last edited by RiceKills (2010-05-31 21:58:05)

you can skip pacmans dependency checks with the argument -d.
as far as i know, you can't fix files that were destroyed by a power outage.
in my experience, it's rather rare that power loss destroys files (provided you use a stable file system).
usually it's sufficient to do a thorough file system check with the repair option enabled (don't do this while the filesystems are mounted or at least mount them read-only). usually you can invoke such a file system check with shutdown -Fr now.

HT1551 apple tv was downloading update and power went out

Cant get the Apple tv to work, I was updateing the software and the power went out, now it won't work at all? any idea what to do ?

Mac App Store- How to resume interrupted downloads

How bad would it hurt my iMac after power went off while using?

I was using my iMac and then the house power went off. I still be able to turn it back on after the power came back. But I dont know how bad did it hurt my iMac after that? Anything to worry about?

You should check the file you were working on when the power went out. For example, if you were surfing the web, there is nothing to worry about. If you were creating a text document, odds are that it is fine, but it may have lost what you were typing in the moment. If you were in the middle of a time machine backup, then the backup may be corrupted, but Time Machine should be able to right itself - but it may take a long time to reindex.
If a large surge of current went through, you would likely notice severe symptoms, like the display going black or the iMac failing to boot up.
I used to use surge protectors, but now I use a backup power supply (which includes a surge protector). That way, if power goes out, I can continue working for 5 to 15 minutes, and the computer will do a normal shutdown if the power outage is longer.
I use the APC Backup UPS with 1300 xs1300va.

The power went out while installing the software update..!

Similar Messages

Maybe you are looking for