The preinstalled ilife programs are not showing up on my macbook pro

I just bought a new macbook pro that had been returned to best buy. When I turned it on the ilife programs are not there like they are supposed to be. What do I need to do.

You need to Register that Mac with Apple, Create an Apple ID (if you don't already have one) Log on to the Mac App Store with your Apple ID and then you should be able to download and install the iLife Apps that you want.
BB foramatted the drive and reinstalled the OS. In doing so the iLife Apps were not re-installed as they are not part of the OS. So now it is up to you to get them.
If the above steps don't work for you then you may need to call Apple to straighten it out.

Similar Messages

Images are not showing up on my macbook pro

I just noticed that images are not rendering when I'm trying to upload them via my Macbook Pro.
I also can't see some videos or images on websites. I do have Flash player installed.

eringlass wrote:
I do have Flash player installed.
Is it the latest version?
Which os version are you using?
Please describe in detail all you have attempted to do in order to resolve the issue.

I installed Firefox 4 and the Orange App button plus the reload and stop are not showing

I installed Firefox 4 and the Orange App button plus the reload and stop are not showing.

You see the orange (on Linux gray) Firefox button if the Menu Bar is hidden, so you need to hide the Menu bar to get the new appearance. 
If you need to access the hidden Menu bar then press F10 or hold down the Alt key to make the Menu Bar appear temporarily. 
You can also place the Tab Bar on top.
* View > Toolbars : [ ] Menu Bar
* View > Toolbars : [X] Tabs on Top
Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end of the location bar. 
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button. 
If you type in the location bar then that button becomes a Go button. 
You can middle-click that Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.

Purchased a song from iTunes on my iPad but its not showing up on my MacBook Pro

Purchased a song from iTunes on my iPad but its not showing up on my MacBook Pro? When I purchase on my Mac it always shows up. Checked. Can't download again from recent downloads and I tried to purchase again just to see and it wants to charge me.

Hi OP
Did this sort your problem? I have the same one too. Purchased tracks on my iPad not showing up on MBP or iPhone. Itunes wants to charge me for it againa dn again!
Anyone?

The DSLR sequence settings are not showing up for me. (I bought CS6)

Like I said my DSLR sequence settings are not showing up for me even though I bought Premiere Pro CS6, I look for a solution but all that came up was that this happens with a trial verison and I don't know what to do.

Did you buy ONLY PPro, or did you buy a suite?
Did you install the program AND the extra content?
Also... More information needed for someone to help... click these links and provided the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679

Photos taken on My I Phone 6 do not show up ON my Macbook Pro both on I cloud

I have my I phone 6 with IOS 8.3. Then I have my Macbook Pro w/Retina Display 2014 with 10.10.3 with Photos. I migrated my I Photo Library to Photos and that went well. However since I updated both my I Phone and Macbook pro, Pictures I take on my I Phone 6 do not show automatically up in Photos on my Macbook Pro. Both my I Phone 6 and Macbook pro are signed into I cloud for photos. The pictures I take on my I Phone 6 show up in the Icloud photos but not in Photos on my Macbook Pro. Am I wrong to assume that when I take photos on my I Phone 6 they will show up on my Macbook pro in Photos? Do I still need to hardwire to the Macbook and import my photos off my I phone? Is there a setting I have not turned on, I have looked I do not think I have missed a setting anywhere? Is there a problem with IOS 8.3 or OS X 10.01.3? Just wondering what is up. Anyone else having this issue?

The music being available for redownload has only been possible for a few months. Before this you could not redownload. The owners of the rights to the ringtones do not allow itunes to provide this feature. hopefully they will at some point.
Regardless, you should always maintain a backup.
Sorry.
You can try contacting itunes support and asking for an exception.

Drives are not mounting to desktop on macbook pro.

External USB drives, SD cards and even DVD media is not mounting to desktop when connected.
This is a new problem for me and have not had this issue previously. I have successfully connected the same devices in the past.
They all show up in the disc utility as connected. I am unable to mount them from disc utility (this button is disabled) and they are not showing up in Finder either.
Please help!

Hi Paul,
Sorry for the late answer. I live in Europe, so that's why I was asleep ;-)
Basically the command tells your computer to unhide everything on your Desktop, so if you don't have a Desktop, something is definitely wrong.
My guess is that there's something wrong with your account on that computer. You can check that by creating a new account in System Preferences (click on Accounts, click the lock in the bottom-left corner and then click the "+" button just above).
Then try mounting "some" media and see if it appears on the new user's Desktop. If not, I would highly recommend to reinstall Mac OS X.
HTH,
Jasper.

Airplay mirror imaging icon will not show up on my macbook pro even though i downloaded mountain lion. How do i get airplay icon to appear on my macbook pro?

i have a macbook pro (almost positive that its a 2010 version) and i got mountain lion. The BIGGEST AND MAIN REASON i bought mountain lion was so that i can do airplay, allowing me to mirror image what is on my mac to my Apple TV. my whole computer is updated as far as the displays and newer features but the small airplay icon will not show up on the top of my screen. therefore, not allowing me to mirror image what is on my mac to my tv... it is connected to the same wifi as my apple tv. idk what to do. could it be because my macbook pro is a 2010? desprately looking for help...please help me with this issue
thank you

Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 AirPlay Mirroring requires an Early 2011 or newer MacBook Pro, so your MacBook Pro isn't supported.
To mirror your MacBook Pro's display onto the Apple TV, you can use an application like Beamer or AirParrot even if AirPlay Mirroring isn't compatible

Airplay not showing up on 2013 MacBook Pro

I have a 2013 MacBook Pro and I have recently purchased an Apple TV which works perfectly with my iPad and iPhone, however my MacBook Pro won't pick up that the Apple TV is even connected to the network. I have had this problem a few times and the last time I completely restored to Mavericks and it was able to pick up the Apple TV, I do not want to have to restore my Mac again. Any fixes?

Hello Scott,
Thank you for providing the details of the issue you are experiencing with AirPlay on your MacBook Pro and the troubleshooting steps you have taken.
I found an article with steps you can take when you do not see the AirPlay icon. I recommend reviewing the section titled "Troubleshooting AirPlay Mirroring" (the title of the article says Mountain Lion, but the steps are applicable to Mavericks as well):
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/HT5404
Thank you for using Apple Support Communities.
Best,
Sheila M.

The latest October updates are not showing up in CC 2014

All of our Adobe programs are still at version 2014.0. In Creative Cloud, everything is "updated".
Also, InDesign is not able to activate the Folio Builder. The following message comes up:
"A software update is required to use Digital Publishing Suite. Please go to the Help menu and select Updates to get the required software."
When I go to the Help menu, the Updates is in grey and not clickable.
This is the same on our Macs and PCs. We have an Enterprise account with programs on both platforms.
I have tried to uninstall Creative Cloud and re-installing afterwards.
So there are 2 major questions here:
1. How do I get my Adobe programs to get the latest October updates?
2. How do I get Folio Builder to work in Indesign CC 2014?

IGM2014 if updates are greyed out then it sounds like updates were disabled by network administrator. Please involve your I.T. department in the update process.

Stats from the Intel AppUp Center Are Not Showing in the Reports

I have tons of downloads and purchases for my app, and it is listed on both the Adobe Marketplace and the Intel AppUp center. The reports show what I assume to be accurate numbers for the Marketplace, but show 0's for all Intell AppUp stats.
I have twice purchased my app from the Intel AppUp store and have given it 1 week to show up, but nothing is there. Is there something wrong with the reporting mechanism for AppUp?

Currently the download numbers from Intel AppUp are not getting displayed on InMarket Portal. We are working on the fix, I will update you as soon as the fix is applied.

How to I set up PSE12 to be the external editor for Aperture - aperture is exporting the photos but they are not showing up in PSE

I want to use PSE12 as external editor for apetture . the photos are exportd but do not show up in PSE. Must be some adjustment I can't find?

The article below is for PSE 10, but should be relevant for PSE 12. I recently used the instructions for editing Aperture photos in PSE 11
http://barbarabrundage.com/2011/10/05/adobe-hide-and-seek-setting-pse-10-as-exte rnal-editor/

HT2275 Do I need to choose "Share this printer on the network" for printers that are not connected directly to my MacBook Pro? I have two HP printers connected to an Airport Extreme (WiFi turned off). I connect by WiFi to another Airport Extreme w cable t

I have three Airport Extreme (AE) routers in my home network.
The main AE is set up for wifi access. The other two are connected by ethernet cables to the main AE. My MacBook Pro connects to the network wirelessly through the main AE. The AE in my office has two HP printers connected to it by ethernet cables. I have a Kodak All-in-one that is connected by USB to my MacBook Pro.
I reset my printer connections on my MacBook Pro and had to add all the printers back to my printer list. I don't know if I understand what the checkbox "Share this printer on the network" in the Print & Fax System Preferences window is for. My guess is that I don't need to share printers unless they are connected to my MacBook Pro by USB, so I should uncheck the "Share this printer on the network" box for the two HP printers that are connected to the AE. I print to them over the network, but they're not connected directly to any computer. I thought if my MacBook Pro wasset to share them and was shutdown, the printers might not be available to my Mac mini or Dell PC, which connect by ethernet to the office AE (which has the two printers connected to it).
What should I do?
For printers connected directly to a Mac (or PC) by USB, check the "Share this printer on the network" box? In my Sharing Preferences, I check "Share Printers."
For printers connected to the AE by ethernet, UNcheck the "Share this printer on the network" box on my Macs (& PCs?) when I add the printers to my printer list? In my Sharing Preferences, I UNcheck "Share Printers?"
FYI
HP LaserJet Firmware Update Utility for HP P2035n is available
Version: 20120105 (19 Mar 2012)
Operating System(s): Mac OS X, Mac OS X 10.5, Mac OS X 10.6, Mac OS X 10.7
File name: P2035_FW_Update_Utility_20120105_v1_4.dmg (3.8 MB)
line: <http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en &cc=us&prodTypeId=18972&prodSeriesId=3662025&prodNameId=3662049&swEnvOID=219&swL ang=8&mode=2&taskId=135&swItem=lj-94537-3>

Question is - will the 2 networks (using auto channel negotiations) exist well in the same house or will there be interference?
Things will be fine since the AirPort Express or AirPort Extreme will automatically search for a good wireless channel. If you assign a separate name for the wireless network, then devices will need to log in separately to this network. The extending device will need to be configured in Bridge Mode.
My suggestion would be to configure what is known as a "roaming" network in your question #2. In this case, you would assign the same wireless network name, security and password settings to the extending device and configure it in Bridge Mode.
The advantage to #2 is that you will be able to walk your laptop from a location near the Time Capsule and as you move close to the extending device, the laptop will automatically switch to pick up the stronger signal from the extending AirPort.
You are actually creating a separate network in #2, so you have the advantage of maximum bandwidth for both the TC network and the AirPort network.
Question - does the Airport Express have to be directly connected to the TC or can that connected be through a switched network?
I'm assuming that you are asking about an Ethernet switch here, correct? The AirPort Express or AirPort Extreme can connect to the Ethernet switch, or directly back to a LAN port on the Time Capsule, whichever is easier to setup.
Question 2 - assuming I can connect the Airport Express to the TC over a switched network, will "extending" the network using the Ethernet network still reduce my overall wireless bandwidth?
Connecting the remote device using Ethernet is by far the best way to extend a wireless network because it maintains maximum bandwidth on the network. This is the way that any good commercial network is designed.
Post back if you need any tips to get things setup.

External VGA monitors are not working only with my Macbook Pro 2012mid version

Hi all,
I have a macbook pro 13' 2012mid version, running the latest version of Mavericks, 10.9.2. If I connect my macbook to any extrernal VGA monitor (I have tried 4 different monitors), then the external display is detected in system preferences, but the monitor is showing only black screen (no signal). I am 100% sure, that my minidisplay port, the cable and the monitors are working properly, cause if I boot the same macbook from bootcamp win7 partition, then external monitors are working well.
I have also tried the same miniDP VGA with an older macbook pro (I think it is a model from year 2011, but also running Mavericks 10.9.2) on the same displays and the monitors are working fine. So the problem must be with in my OS X.
A have also tried some things, that I found on the net, like booting with the plugged in monitors in safe mode, reseting pram, I tried different settings for the external monitor in the system preferences (resolution, refresh rate...) but nothing helped. External monitor stayed recognized in system preferences, but with black screen and no signal.

Your post is incredibly hard to read, font is way to small.
If you used Boot Camp Assistant to create a partition to install Windows to you need a REAL Windows 7 or 8 install media and license key and you have to actually install Windows on your Mac. Boot camp is only for creating a partition to install Windows and starting the Windows install from REAL Windows install media.
That Windows install media has to be a DVD disc, if your Mac has a built in DVD drive (Apple does not allow Windows to be install any other way on Mac computers that originally come with a built in DVD drive), or from a USB stick with the actual Windows install files on it (Not an ISO of the Windows install files).
So the question is did you install Windows on your Mac? It doesn't look like it from the Option key boot and the list of available Boot Devices you posted.

2 different expresscard/34s with 2 firewire 800 ports are not fully recognized on new macbook pro 17" under lion

We have 2 expresscard/34s, a Belkin ec1394b2 and a Startech "FireWire 800 ExpressCard". Both are "reported" to suppport OS X but neither does more than show "PCI FireWire 800 ExpressCard" in the available interfaces list in Network Preferences with a status of "Not Connected". In the System Information report under "FireWire Device tree" it shows the built-in FW 800 port as "FireWire Bus" with a drop down arrow which expands to the proper hard/software dtails and then "FireWire Bus" with no dropdown arrow, no more info.
Now that I have them I see no reference to mac or OS X but I've seen a number of reviews of these cards from OS X users who claim to be using them happily. It's a long weekend so everyones tech support is gone gone gone. Any suggestions?

A) It seems your problem is an hardware failure. It happens and I don't think the way you use Firewire devices is the cause of that problem. It's just bad luck. That said, it's probably a good thing to use the power supply of your hard drive instead of bus-power.
B) If you want a new computer and you don't need something portable, I think the iMac is an excellent choice for the price. Over a Macbook Pro, you'll gain a bigger screen, FW400 port, etc, and you'll pay less than if you buy a laptop.
C) If you still want to go with a laptop, you can hook the Duet to your hard drive but I don't think the bus will be able to power both devices. Therefore, you'll absolutely need to use your hard drive's power supply.

The preinstalled ilife programs are not showing up on my macbook pro

Similar Messages

Maybe you are looking for