The Prerequisites for releasing process order

Hi all,
What are the Prerequisites for releasing process order?
Can we issue the material against process order, if it is on CRTD status?

Hi,
Prerequiste for REL of Process Order -
Process order should have CRTD status.
Other with IMG setting, you can have order status directly REL once it is created also. See Prod Sch Profile setting.
You cannot do goods posting (GI and GR) unless order is REL status. Not possible with CRTD status.
Srini

Similar Messages

  • OSSNOTES for releasing process orders with missing parts in background

    Hi All,
    The bapi 'BAPI_PROCORD_RELEASE' is not releasing the process orders
    with missing parts in background.
    Is there any OSSNotes for releasing these process orders in backgound through this bapi.
    Pls help.
    Thanks .

    Hi Suri - Thanks for your response. I tried both with blank(individual and collective) and 2 (collective req. only) but I still get the same result. I found one other setting that can solve this issue and that is checking the activate full confirmation logic at the the MRP group level in OPPR. I will test more and let you know if that works but we dont use MRP groups here at our client and that is why I was little hesistant to set up collective availability check parameters at the MRP group level. But looks like this is the only option that we can use to get this resolved.
    Thanks,
    Bharath

  • Problem in reversing the released Process order.

    Hi PP Gurus,
    When I'm trying to reverse the Process order release in change process order COR2 system is not allowing me as the menu option is Gray. When I released processed order Control recipe is generated and due to some problem in PI sheet I discarded in CO60 transaction code. So can anybody please tell me how to handle this situation? I mean is this can be resolved by configuration or enhancement?
    Thanks & Regards,
    Abu Arbab

    Hi Krishna,
    Thanks for reply.
    Now tell me what should be the approach we if we don't want to delete the Process order? Say PI sheet is created and sent to it's destination through Background job and later we found some error in PI sheet so and we've discarded that PI sheet. In case when I don't want to delete or Teco Process order, what will be the process in this case?
    Thanks & Regards,
    Abu Arbab

  • Report for released purchase order

    Hai guru's
    this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
    Prasad

    Hi Krishna,
    You could use Me2N with the dynamic selection coupled with normal selection screen.
    In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
    hope this should solve your query
    Sk.

  • Prevent reschedule on released process order in APO

    Hi,
    We have a business requirement that does not want APO to reschedule on released process orders regardless of production posting quantity.  (don't want to change the order end date/time)  It is similar to R/3 scheduling type "only capacity requirements", but with visibility on APO for resource capacity.
    I tried to implement CIF user exit  EXIT_/SAPAPO/SAPLCIF_ORD_001 with different logics, but still not able to achieve it.  How can we make the system do what we want?  What is the key for remain process time calculation?  Please advice.

    For example: we have a released process order that starts at 10/01/2007 00:00:00 and ends at 10/06/2007 23:59:59 with quantity 7000 KG (1000 kg of production rate per day).
    When a production posting is made (for example: 700 KG was posted on 10/01/2007 23:59:59), CIF sends the update to APO and APO reschedule the order based on the remaining quantity 6300 KG) and the end time of this order becomes 10/07/2007 07:12:00.   In our lines, the production order may not be started on time and posting may be different than what we expected, but we want the order still shows up in APO as start time 10/01/2007 00:00:00 and end time 10/06/2007 23:59:59 with daily distribution of 1050 KG for 10/02 ~ 10/06.  This way, it won't mess up the receipts and resource capacity on PPT for next week's production. 
    Thank you.

  • Regarding Error Message while releasing Process Order

    Dear friends,
                              While releasing process order i m getting following error message.
    " Storage location in PUB(loc1) is not same as storage location (loc2)''.
    how to remove this error and release the order.
    Thanks & regards,
    Sandip Sonar

    Hi Sandip,
    The error message LP 099 'Stor. location in PUB X is not the same as prod.stor. location Y' is issued when the system finds  inconsistancy in your customizing of the couple storage location - Production supply area for your components in your process order.                                                                               
    The logic of the storage location determination is the following ...
    The issuing storage location is determined in three steps:                                                                               
    1. First, the issue storage location of the material to be issued   (MARC-LGPRO) is transferred to the material master from the  MRP    data if it is filled.                                                 
    2. The system overwrites this value with the issue storage location from the bill of material (RC29P-LGORT, STPO-LGORT) if it is     filled.                                                               
    3. If the operation to which the component is assigned in production  order contains a work center with supply area, the storage    location is transferred from this supply area (PVBE-LGORT).     However, this transfer is only carried out if storage location  data (MARD) is maintained for this storage location for the    material.                                                                               
    The logic of the supply area determination:                              
    Priority of supply area determination for WM staging is as follows :     
    1. Supply Area of Work Center               (highest priority)   If no supply area defined look to                                     
    2. Supply Area in item of Bill of material  (second priority)   If no supply area defined look to                                     
    3. Material Master View MRP2                (third priority)         If no supply area defined -> Error message LP 099                                                                               
    I hope this helps in sorting the issue.  
    Regards,
    Mauro

  • Is it possible to release Process Order  with Material Shortage

    Hi All,
    We are using PP-PI & still wants to have behavior of the PP prod order
    i.e. Release Process Order with Material shortage.
    Is it Possible.
    Regards,
    Jatin

    Hi Jatin,
    Go to Transaction OPJK. Select your Plant, order type and Business function as 2-Check availability during order release.
    Under Material Availability tab, maintain '1- User decides on release if parts are missing' if user wants to decide for release of Process order or '2-Release permitted despite missing parts' if you want directly the Process order should be released despite of shortage in Release material field.
    These settings are similar to PP.
    Please check and revert.
    Regards,
    Hiren Ramani

  • BADI/EXIT - COR1 (block release process order without number batch)

    Hi Gurus,
    There are a BADI ou User EXIT in the transaction COR1 to block the release Process Order without number of batch created??
    In COR2 OK, but COR1 I don´t find. I tried all the possibilities that knew!!!
    Thank´s
    Cleber

    Hi,
    The below user exits are avilable for COR1.
    EXIT_SAPLCOKO_001
    EXIT_SAPLCOKO_002
    EXIT_SAPLCOKO_003
    EXIT_SAPLCOKO_004
    EXIT_SAPLCOKO_005
    EXIT_SAPLCOKO_006
    Check if you can use any of the above.
    Regards,
    Soumya.

  • Released Process Order

    Hi All,
    From Which table we can fetch the RELEASED Process Orders.
    Regards
    Deekshitha.

    Hi Deekshitha
    There are 2 scenarios  that i can see here :
    1. I assume that you have a list of orders with you say in s_aufnr and you want to  
       check which one of those have a system status of REL i.e. Released.
       a. Goto table AUFK to get the list of object numbers(OBJNR)  for all the orders
       b. Use FM 'STATUS_READ_MULTI' for getting all the statuses for the orders.
           CALL FUNCTION 'STATUS_READ_MULTI'
    EXPORTING
      CLIENT                           = SY-MANDT
                 ONLY_ACTIVE                = 'X'
      ALL_IN_BUFFER              = ' '
      GET_CHANGE_DOCUMENTS       = ' '
      NO_BUFFER_FILL             = ' '
               TABLES
                 OBJNR_TAB                   = gt_objnr
                        status                      = gt_status
      JSTO_TAB                      =
      JCDO_TAB                     =
      JCDS_TAB                     =
        This is an unrealeased FM from SAP but can always be used to read data.
       c. Once you get the list of object numbers with statuses , for each object
           number read table gt_status to see if it has a STAT = 'I0002'. If yes then this
           order is  a released process order . We take I0002 value to compare   
           because if you see table TJ02 that has all system status values , you will see
           that I0002 stands for 'REL' which means released.
           In this way you will be able to get all the object numbers and corresponding
           orders which have a status 'REL'.
    2. The second scenario is where I assume you do not have a list of orders with 
        you and you still want to find out the orders which have a status of 'REL'.
        In this case:
        a. Goto table JEST and get all the object numbers for which STAT = 'I0002' and
            INACT NE 'X'.
        b. Goto table AUFK and for the object numbers obtained above and you can get
            the  corresponding order numbers(AUFNR).
    I hope this helps. If so please reward some points .
    Cheers
    shivika

  • How to release process order even if stock not available...????

    Hi All,
    Kindly tell me how to release process order even if stock not available...????
    Its urgent.
    Thanks in advance,
    Regards
    Anish Verma

    Hi Daniele,
    Need your help to clear COGI Error.
    Actually some how for one process order, two confirmation happened.
    Scene 1 : When first time did confirmation then automatically without any error display came process order saved but all goods movement failed.
    Scene 2 : Then for the same without checking COGI error, did second confirmation and then it worked perfectly. Process order got saved without any fail.
    Scene 3: When doing TECO its showing Post processing Error.
    So checked by COOISPI and found two confiramtion done for one process order.
    Now when doing COGI the FERT movement is not happening. Its showing deficit of stock. But smae stock is available in MMBE.
    Pls help me in resolving the same.
    If any query pls contact me. Its urgent
    Regards
    Anish Vema
    07773009107
    [email protected]

  • Blocking Changes in Released Process Orders

    Hi Experts,
    I need to block manual changes in Released Process Orders ( both in quantity and date) in APO. So, I need some userexit/BADI/FM which can help me to stop this change.
    Can anybody suggest something for this ?

    Hi Ulrich,
    Can you please explain a bit further --when this BAdI comes into picture ? When you save the Product view ?
    Is there something similar for Detailed Scheduling Planning Board also ?

  • Report for open process orders

    Dear SAP experts,
    As the period of the process order from open to close is not short, will take 1 or 2 months in our business case, so we want to find a report which can get the information just like the output of KSPP(for planned orders) .
    I tried to analysis the logic of program KSPP, and it seems the function modules based on the planned orders only.
    Is there any way to get the similar report for open process orders?
    Many Thanks,
    Lisa Yao

    Is there any clues?

  • BOM Explosion for Multiple Process Orders

    Hi,
    I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
    Thanks

    Dear Sukendar,
    1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
    this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
    In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or 
    CSEP_MAT_BOM_READ  or CS_BOM_EXPLOSION   or CS_BOM_EXPL_MAT_V2 .
    2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
    shows you the level by level by BOM for a FERT.
    Check and revert back.
    Regards
    Mangalraj.S

  • Credit Block for released sales order

    Dear All,
    I have got one issue. There is a sales order which was created earlier say 15 days back. It went into the credit block at the time of saving it. It was released through VKM3 too.
    Now when i change any field in the sales order today, it is going into the credit block. We are not changing any value of any of the item. Just maintaining the Billing block in it or remobving the Billing block.
    The number of days maintained in the OVA8 are 182. So as per the standard functionality it should not go into the credit block for any change in the sales order like changing the billling date or changing the billing block.
    Can you please let me know what might be the reason for this sales order to go into the credit block..??? Any help is very much appreciated.
    Thanks and regards,
    Vishi.

    Dear Vishi
    Please check if you have checked the critical fields option.
    Credit check against critical fields (fixed value dates)
    The indicator controls the critical field check. If the field is selected, the system checks whether critical fields have been changed.
    Use
    If a check is carried out, the following fields are relevant:
    Payment terms
    Additional value days
    Fixed value date
    Note
    Use this type of check for sales documents only.

  • Target Vs Acual Cost Comparison for multiple process orders

    Dear SAPians,
    I want to take a report for target vs actual cost for all process orders and product cost collectors created in a particular period. I have checked the standard report KKBC_ORD that serve my purpose but for a single order. I want the same report for multiple process orders and product cost collectors.
    Is there any standard report or should I create a report painter report. I have tried to create a report painter report based on library 7KO, but target cost was not showing for selected order.
    Kindly suggest.
    Shirazi

    Target Costs are available in library 601 for internal orders (and can be used for process/production orders).
    Regards,
    Adrian

Maybe you are looking for