The "...press menu" message just statrted up again

The "press menu" prompt just started up on my Quantum FIOS system I can't find the screen saver option to turn it off. I have the media server system no STB; where is it hiding now?

ChasH wrote:
I don't have those exact menu options but this looks similar - Menu>Settings>System>Media Server Settings>Sleep Timer and I've set it to None. That may do it. Thanks for the tip
Yes that will do it. I just checked my settings and looks like they changed it from auto off to sleep timer. I was wondering what the deal was when my box got another update the day after the initial update.

Similar Messages

  • I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too.  How do I correct this?  It didn't do this before.

    I have ebooks on my ipod and when I'm listening to a story it will not go to the next chapter, it just starts over again with the chapter I just listen too.  How do I correct this?  It didn't do this before.

    ebooks is a term for (mainly) textual books that can be read on screen. If you're listening then I think you mean audiobooks. See audiobooks on iPods. Either reorganize as single files or access via a playlist.
    tt2

  • HT1933 I don't see the problem menu I just keep getting this article link when I click "report a problem" next to the offending item in itunes purchase history. What gives?!

    When I try to report a problem on one of my purchase videos, I keep getting this link: http://www.apple.com/support/itunes/#video_purchases
    The article says I should see problem menu from which to choose my specific issue, but that is not happening.
    I'm stuck in a loop of bad service, what's up?

    You're right that the documentation says "for best results select the entire eye, not just the pupil". And then it goes on to talk about pupil size. The point I'm making is (1) you don't get "better" results ... you get an error if you just select the pupil; and (2) software systems that are smart enough to detect a user error and simply "beep" and "beep" could and should in fact be smart enough to offer some sort of unobtrusive help message. The red-eye tool worked fine, I'm commenting on Adobe's not-very-useful error beep. I read the instructions several times, but I missed the point. When I used the tool, the default (?) shape of the tool was, well circular ... like a pupil. It seemed very natural to orient this circle with the pupil of the eye. Not a big deal...just a suggestion for a human factors improvement.

  • Resending the Mesage in Message Monitoring is failed again & again

    H i !  All
    In Scenario Idoc to File , the connectivity between XI server & FTP  was down , Now is up ,
    a message is failed , now again i am  re-sending the message from Message Monitoring , showing the belolw error , FTP Connection is UP now  , in SXMB_MONI  message is processed
    Exception caught by adapter framework: An error occurred while connecting to the FTP server '10.10.100.205:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /STORES/102/sapoutbound: The system cannot find the path specified. '. For details, contact your FTP server vendor.
    what can be the reason ???
    Thanks
    Abhishek

    The prolem is stil the same .....
    today more than 300 mesages get prossed . I can see on FTP , but 23 messages get failed ....using same communication channel ....
    I am putting the details
    Sucessed messges
    Write to FTP server "10.10.100.205", directory "\STORES\0019\sapoutbound",   file "ZINV01_ZINVMSG_001920090705-172939-687.XML"
    failed messages
    Exception caught by adapter framework: An error occurred while connecting to the FTP server '10.10.100.205:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /STORES/193/sapoutbound: The system cannot find the path specified. '. For details, contact your FTP server vendor.
    Thanks
    Abhishek
    Edited by: Abhishek Agrahari on Jul 6, 2009 8:00 AM

  • After dragging a song into a playlist, the playlist menu window just stays put and in the way. what gives?

    So I'm putting together a playlist in Itunes 11.1.5, selecting songs and dragging them over into the pop-in playlist menu, as you do.
    The first thing I notice is that the menu won't appear after I've begun dragging the chosen song and I need to grab and drag it a second time to make the playlist pop-in materialize.
    That second attempt is always successful in that the song does get added to the selected playlist, but then the playlist drop-in menu simply hangs out, rather than sliding out of view again. It blocks the righthand third of everything and nothing makes it go away. the only respite is to switch over to the "playlists" view which, presumably because it doesn't have that functionality of the drop-in menu, disappears same. When switching back to the Album view, the drop-in menu will be gone, but my place in my library will be lost.
    Annoying.
    Any ideas?

    Possibly a multiple tag issue. Try right click and Convert ID3 Tag > None two or three times, then Convert ID3 Tag > v2.3. You'll need to reapply album art, but I susepct that will fix it. iTunes works best with a single ID3v2.3 tag but some software creates parallel v1 tags, and it is even possible to add multiple tags for multiple languages. iTunes behaviour with multiple tags is somewhat unpredictable, occassionaly causing it to revert changes it seems to have applied.
    tt2

  • How to stop the "Press Menu to wach Fios TV, otherwise turn off your TV"

    Does anyone know how to stop the STB from going into this mode?  It messes up my other home entertainment equipment.
    Thanks!

    New option in IMG 1.7:
    Menu ==> Settings ==> Set-Top Box ==> Screen Saver ==> No Screen Saver in Standby
    Justin
    Verizon FiOS TV, Internet, and phone
    QIP6416-P1, IMG 1.7C, Build 09.83
    Keller, TX 76248

  • After partitioning with Windows CD in drive, MBP restarts and doesn't go to the Windows Installer. Just restarts Lion again.

    I've put the disk in yet the restart doesn't go to the Windows installer.

    Try holding 'c' on startup or Option key - does the DVD show in EFI boot list?
    It is a DVD, Windows 7 won't fit on CD.
    And you aren't talking drivers, but the installer DVD, right?
    You bought physical DVD, No? then you burned downloaded ISO but need to reburn at slowest possible speed.

  • Is the Nightly 12.0a1 64 bit icon in the start menu for Windows 7 supposed to have a jump list for frequent pages visited and tasks (open new tab, open new window, enter private browsing)?

    Both my standard Firefox icon and Waterfox icon have jump lists in the start menu and taskbar. Even the pinned Nightly icon in the taskbar shows this, but it doesn't show in the start menu. Just odd to see that the icon in the start menu doesn't offer this feature considering it does in the taskbar. I've reinstalled several times but it doesn't seem to change anything.

    There are hidden settings that control the display of jump lists, check these to make sure that they have been enabled.
    Type '''about:config''' into the location bar and press enter, accept the warning message, and a list of preferences will be displayed.
    In the search box at the top type '''taskbar.lists''', it will then display a small number of preferences. Check the values of the following preferences (you can double-click on them to change the value)
    * '''browser.taskbar.lists.enabled''' - should be set to true to enable jump lists
    * '''browser.taskbar.lists.frequent.enabled''' - set to true to have the frequent sites displayed
    * '''browser.taskbar.lists.tasks.enabled''' - set to true to have the tasks displayed
    * '''browser.taskbar.lists.recent.enabled''' - set to true to have the recent sites displayed
    By default the first 3 settings are true, the last is false.

  • My I Mac showed an error while updating the OS and now just hangs. What should I do?

    I Mac asked me to update the OS from 10.7.3. It showed an error and now the computer just hangs. Its become excuriatingly slow. Takes about 15-20 minutes to boot up and takes hours to perform any function. I tried to update the OS again but it keeps showing an error in connecting to the server. What do I do.?

    Have you tried booting into the Recovery HD to check/repair your disk. Restart holding Command+R - once booted select Disk Utility and then select Macintosh HD and click on 'repair disk' If it fixes anything click repair disk again until you get a clean pass. Whilst in Disk Utility you could also 'repair disk permissions' With Macintosh HD still selected click on 'repair disk permissions'. Once done, restart as normal from the Apple menu.
    Then try updating again using the 'combo', available here: http://support.apple.com/kb/DL1582
    If you still have problems you could try a Safe Boot: restart holding down the shift key until you see the grey progress bar. Once booted restart as normal from the Apple menu.

  • Where is the TOOLS MENU

    Every time I try to change something like "turn off cookies" the FIRST action I am asked to take is go to tools menu.......WHERE THE $&*$%&^IS IT????????

    In newer versions of Firefox, the Options window has been moved from the Tools menu to the Firefox menu. Press the orange "Firefox" button in the top left corner and then choose "Options."
    You can also press Alt+T on your keyboard to show the Tools menu (or just Alt to show the whole menu bar). Or you can right-click on the orange Firefox button and select "Menu bar" to turn the old-style menus back on.

  • Need to find the way to get the actual error message in the alert log.

    Hi,
    I have configured OEM 11G and monitoring target versions are from 9i to 11g. Now my problem is i have defined the metrics for monitoring the alert log contents and OEM is sending alert if there is any error in the alert log but it is not showing the actual error message just it is showing as below.
    ============================
    Target Name=IDMPRD
    Target type=Database Instance
    Host=oidmprd01.ho.abc.com
    Occurred At=Dec 21, 2011 12:05:21 AM GMT+03:00
    Message=1 distinct types of ORA- errors have been found in the alert log.
    Metric=Generic Alert Log Error Status
    Metric value=1
    Severity=Warning
    Acknowledged=No
    Notification Rule Name=RULE_4_PROD_DATABASES
    Notification Rule Owner=SYSMAN
    ============================
    Is there any way to get the complete error details in the OEM alert itself.
    Regards
    DBA.

    You need to look at the Alert Log error messages, not the "status" messages. See doc http://docs.oracle.com/cd/E11857_01/em.111/e16285/oracle_database.htm#autoId2

  • The context menu does not work

    Hello Everyone,
    I have a problem when I try to use  the context menu.
    Just it does not work using control key and click, for example when I select a folder and I want to apply a color
    for the folder the context menu does not work.
    Thank you if anyone has an idea of how can I restore the normal function.
    Adrian

    /Library/Preferences/com.apple.finder.plist 

  • Tried to call applecare about my phone before the press conference today

    My phone is having a lot of probably with the proximity sensor. Is there a fix? I am on a call and I can see the screen is still ON,even though the phone is pressed agaisnt my ear.
    I called applecare about this BEFORE the press conference today, just in case they choose not to assist users without previous reference numbers. I hope they don't do that.

    "just in case they choose not to assist users without previous reference numbers. I hope they don't do that."
    Of course they won't do that.
    Have you updated to 4.01?

  • I keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get it when I either try to open it from the Start menu or from the desktop icon.

    I've just installed Firefox on my laptop and keep getting the message, "Windows cannot find 'c:\Program Files (x86)\Mozilla Firefox\firefox.exe'. Make sure you typed the name correctly, and then try again." I get this message whenever I either try to open it from the Start menu or from the desktop icon. I've never gotten it to work and even uninstalled it and then redownloaded it and still cannot get it to open. Any help would be greatly appreciated!!!!

    Are you installing from the official site? http://www.mozilla.com/firefox
    If you use Windows Explorer (My Computer) to check that path, is the Mozilla Firefox folder there? That is the normal installation location, but I think it's worth checking.
    If the folder isn't there or firefox.exe is not in it, I wonder whether some other software might be interfering. You might want to run some supplemental security scans. These two tools are highly regarded:
    Malwarebytes Anti-malware : http://www.malwarebytes.org/products/malwarebytes_free
    SUPERAntiSpyware : http://www.superantispyware.com/

  • HT4914 When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

    When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

    I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
    It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
    As it takes a good ten minuites for itunes
    If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
    Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
    I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

Maybe you are looking for