"The previous performance of overclocking is failed"

"The previous performance of overclocking is failed"
I get this error almost everytime i turn off or restart my computer. Thats after I restart my computer 5 times because all I have is a black screen. I read about it and I have to restart that many times as a safety feature for when you overclock and something goes wrong. But my problem is, I am not overclocking, I have reformatted and reset my bios SEVERAL times, so what must i do to make my computer "stop overclocking" its self everytime I restart my computer?
I have a K9N Platinum SLI motherboard
Running Windows XP home
AMD X2 6000.
Corsair 620Watt PSU
One Maxtor 160GB HD
MSI 8800 GTS 640MB
Oh yes, and I have updated all drivers and flashed/updated bios to the latest version per MSI live update.

Quote from: exce on 27-December-07, 19:29:42
I was at version 1.10 and Live update said I could update to 1.A0. I had this problem before I flashed the bios. It seems to have occured at a ramdom time too, not after I upgraded or did anything to my computer.
"I had this problem before I flashed the bios."
normal
"I was at version 1.10 and Live update said I could update to 1.A0."
Don't listen LiveUpdate.. 1.10 = 1.A0 its the same BIOS version...
What memory sticks you use? Provide full details brand, exact model. Have you tried with just one memory stick in 1st DIMM close to CPU socket?

Similar Messages

"Warning!!! The previous performance of overclocking is failed..PLEASE HELP!

So I woke up this morning and my computer was cycling on and off. I unplugged it, waited a minute, plugged it back in. I booted up and got the "Warning!!! The previous performance of overclocking is failed and the system restored to the default settings...." and it gave me 2 options. So I chose the revert to default and enter settings. The main problem was it kept not recognizing my SSD drive as primary boot. So I changed it to primary, rebooted and got the quick on/off cycling.
So I get on my laptop and google it, I find it's a common issue. Seems like there is a memory issue, sure enough I log into settings and switch it to 1600 speed, enable XMS, reorder the boot priority again, enable ACHI, I also turned off the OC genie. I reboot again and it takes a while but it finally boots up. It takes a few minutes to get into the desktop and load the various start up items.
I can tell it's very sluggish though. Normally if I open any windows it's instant. I open up Chrome, and it's slow, it won't scroll up/down smoothly, it sorta stutters. I tried to open a video and it won't play it, like there's not enough CPU to handle anything. When I reboot it takes a little longer to get into Windows as well. Any suggestions? Did I maybe miss a setting in BIOS? Any help would be greatly appreciated!
Silverstone FT-02 case
MSI GD-65 mobo
2500k Intel cpu OC’d to 4.3GHz
16GB Corsair Dominator memory
128GB Crucial M4 SSD
2TB WD Black Edition HD
2TB Seagate HD
EVGA 780GTX OC edition
Acer GD235HZ 23.6″ 120hz monitor
Lite-On DVD Lightscribe burner
Corsair AX1200 PSU
Corsair H60 HSF unit
Windows 7 Home Premium

When you tighten the screws of the cooler pump do each of them a little at a time in a crisscross pattern. Do not tighten each screw all they way down one at a time. Do not tighten screws in either clockwise or counter clockwise pattern.
1 - O O - 3
4 - O O - 2

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am

I currently have an I5 and as with the previous I4, both buttons have failed and now my battery lasts almost six hours if I don't use it. I cannot upgrade my phone until March, 2015 even though I recently upgraded my phone to the More Everything Plan. Am I destined to be a nonuser for three months until I can upgrade. This is very unacceptable as I've been a Verizon Wireless customer for probably 20 yrs!

As a 20 year customer of ours, we certainly appreciate your loyalty Richey_Rich. I know the importance of ensuring you have a properly operating phone. Can you please clarify which button on the device is not working? Is there any physical or water damage to your phone? Any applications that stay running?
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

Reassigning the task back to the previous performer in Swimlane role

Hi Guys,
I have a requirement where once the approver rejects the proposal it should go back to previous exact user in swimlane who has sent the proposal.
Can you help me with an approach on how to achieve this using Oracle BPM 11.1.1.7.
I have already tried with getLastPerformer().. and its not working and latter i came to know its an Known issue. If there are any workarounds pls let me know.
Regards
Santosh H

I did the try statement with no luck. It still doesn't put the setting back on cancel. I just copied and pasted exactly what you had; should I have done more to it?
I did the following:
start of script
--properties
--Dialog (cancel, continue)
--If continue then enable setting
try
--MySuperLongScript
--the revert command
on error ErrorName number ErrorNumber
if ErrorNumber is -128 then
--do the revert command
else
display dialog ErrorName
end if
end try
--final end if (and end of script)
After a little bit more manipulation of the script, I got it to work. thanks

Another Overclock is failed thread! X

Hi all,
As usual a first post from a newbie who "hopefully" has a simple problem.
I have seen several threads with my board and the following text.
" Warning!!! the previous performance of overclocking is failed, and the system is restored to default setting. press any key except "del" to enter setup....."
And I have done most of the recommended things, 1 stick of memory etc. etc.. and I am now thinking that its the bios....
I'm pretty sure all is plugged in correctly, I have found that there are two types of E8400 on the MSI website, one is supported in bios 7.0 and the other says 7.2 or under test. I can't find the page at the moment to confirm.
I got the error message straight away once plugged in, so I have tried all the usual tricks like "underclocking" to see if that does any good and I did manage to get the system to start installing windose, right up until It needed to reboot, now I get the overclock failed message every time no matter what it try?
At the moment the board is not in a case, just sitting on the desk with the bare minimum plugged in to get it working.
So my questions are
1. How can I tell what version of E4800 I have or if the chip I have needs 7.0 or 7.2?
2. if its 7.0 what am I doing wrong?
3. if it is 7.2 how do I flash the bios without being able to boot to windose and without an a: drive?
If I have missed any info please ask as I am really please with this board, its about 5000 times quieter than my last one!
x48C Platinum version 3.0, 7.0 bios
Core 2 duo / E8400 3.0 GHz
Corsair 4Gb DDR3 1333
8800GTS gfx card
500w power supply (Blue diamond?)

Quote
I can't find the page at the moment to confirm.
Here it is:
http://global.msi.eu/index.php?func=prodcpusupport&maincat_no=1&cat2_no=170&cat3_no=&prod_no=1393#menu
Quote
1. How can I tell what version of E[84]00 I have
You can tell by looking at the sSpec-Number:
E8400, C0 --> sSpec# = SLAPL [supported since BIOS v7.0]
E8400, E0 --> sSpec# = SLB9J [supported since BIOS v7.2]
The sSpec-number can be found on the CPU itself or on the sticker of the CPU box:
This picture shows an E8500, but it is for comparison only and should tell you where to look:

P35 NEO2 FIR failed to boot – massage about overclocking is failed

My Hardware:
- P35 NEO2 FIR
- A-Data DIMM 4096MB DDR II 800MHz Extreme Edition AD2800E002G (2x2GB)
- Intel Core2 Duo E8400 3,00GHz, 6MB Cache, 1333MHz, 775pin
- Western Digital Raptor WD360ADFD - 36GB SATA @ SATA-1
- Fortron Blue Storm 500W (PSU)
- Sapphire ATI Radeon HD 3870, 512 GDDR – no oc
- Bios version: 1.8
- Windows XP Professional SP3
I have problem with booting PC. When I turn on PC, it twice reboot a then it appears message:
„Warning!!! The previous performance of overclocking is failed, and the system is restored to the defaults setting, Press any key exlucde DEL to enter SETUP…“
I have read this forum and found some topics with this same problem. There is often recommended set clocking values of DRAM. I have set DRAM Timing by SPD do disable and set clock for following values:
4-4-4-12 (Auto V) – recommanded by manufacturer (A-Data)
4-4-4-12 (1.9V)
5-5-5-15 (Auto V)
5-5-5-15 (1,85)
5-5-5-15 (2,1V)
5-5-5-18 (Auto V)
5-5-5-18 (1.8V)
5-5-5-18 (1,9V)
This attempts was failed. When I turn off Pc and wait about 20 minutes - PC again twice reboot and then it appears massage about overclocking is failed.
I have tried to Load Optimized Defaults as well as Load Fail Safe Defaults, but the situations is the same.
I have tried to flash bios to the latest version 1.9, but the situations was worse – when turn on Pc, it reboot about 7 – 15 times and then appears again massage about overclocking is failed. So, I downgrade to version 1.8.
Could you give me pls somebody some sugesstions?

Ok, I will do a test and give here results.
Maybe I find a solution of my problem. During testing PC I found out following: when I turn off switch on PSU immediately as soon as Windows shutdown PC (I do it always), so at next time booting, PC twice reboot and then it appears massage about overclocking is failed. But when I wait about 10 seconds after Windows shutdown PC and then turn off switch on PSU, at next time booting, PC once reboot (normal state) and everything is OK.

Attempted to install AirPort Utility 6.0 on my new mac mini. Install failed and now the previous version 5.5.3 won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 AirPort Utility still won't open? Help.

Now the previous version won't open. I downloaded and tried to instal 6.0 without software update, which failed, and my old 5.5.3 Airport Utility still won't open.
iTunes no longer recognizes my airport express.
Error Message:
None of the selected updates could be installed.
An unexpected error occurred.
Can't delete Airport Utility and reinstal from scratch as it is, “AirPort Utility” can’t be modified or deleted because it’s required by Mac OS X.
Any sugestions?

I reinstalled AirPort 5.5.3 which worked, but the app still won't launch but iTunes now recognizes my AirPort Express, I just hope I don't want to change its settings.

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

Error when printing: Printer selection failed. Restoring the previous selection.

Hi!
Sometimes when I'm printing in InDesign CS3 the default printer is PostScript and when trying to change it the error "Printer selection failed. Restoring the previous selection." appears.
It´s the same error as in this unsolved old thread:
Printing Error: Printer selection failed. Restoring the previous selection.
Does anyone have a solution to this?

What is the OS? CS3 was not tested on recent OS versions and may not be fully functional. You can export to PDF and print that from Acrobat or Reader.

I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.

I've installed Photoshop CS5 on a new latop but it doesn't recognize my RAW files. Additionally, repeated attempts to perform available updates have failed. The laptop has Windows 8.1 64Bit.

I don't know who you talked to, but some of the support techs tend to look at CS5 as "no longer sold or supported" and usually don't want to mess with it.
We are mostly user-volunteers and have time to help you out. Some of us get perks from Adobe, but we are not employees.
I actually gave you the links to the two very important CS5 updates, but you want to peruse this general list Adobe - Photoshop : For Windows
and get the Bridge CS5 updates as well. Adobe - Bridge : For Windows

When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box,

# Question
When the program gets terminated unexpectedly (power failure, UPS fails), when I reopen it, it usually does NOT return the previous pages, as I have checked in the 'options' box, but goes to some random collection of pages often from months ago. Very frustrating - can anything be done to COMMAND it to save current pages and re-open there? (As I said, I have this box checked in the options, but it does not work ..

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing.

Since a few weeks all my iTunes Updates fail to install. After the installation trial, the previous installation is damaged – a service is missing :
To fix this I have to deinstall all components of Apple Software in exact order as you reveal on your web site. Than reinstall iTunes from Scratch.
I am using Windos 7 64 bit Professional German edition.

Hi,
to see the cause of Windows 8 update failures, we must look for error messages in the following log files:
Please run the Windows Explorer and go to the folder "C:\Windows\Logs\CBS\" and copy all files to your document folder, also copy the setupapi.dev.log from the folder C:\Windows\Inf, the "C:\Windows\WindowsUpdate.log" and the file "C:\Windows\winsxs\poqexec.log"
to your document folder (otherwise you can't upload it), zip all files into 1 ZIP and upload the zip to your SkyDrive [1] and post a link here.
André
[1] http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65
"A programmer is just a tool which converts caffeine into code"

Precondition, If any of the previous steps Fail (some Skipped)

I'm a bit puzzled about how to build an "Anyof()" statement in the step "precondition".
I want to setup a statement that will NOT run the last step in a subsequence if any of the preceeding steps fail, though some will be "Skipped".
If I use "AllOf()" and include the steps as "Passed", then it fails in my precondition because of those that are skipped. I want "NOT (AnyOf())" and list all the steps Failed, but the buttons won't let me construct that for of statement (can't put the "NOT" in front, nor a "!".
What am I missing here?
Mike

Sorry guys for the question, but I just found it, there is the "Negate" checkbox. I just missed it in constructing the statement.
Mike

Virtual Machine crashing all the time: The previous system shutdown at a certain date was unexpected

Hello,
I've a build node that is constantly crashing and rebooting.
When I go to system event log I'm not able to identify the reasons for such behavior.
For instance regarding the machine latest crash I can see: The previous system shutdown at 10:24:57 on ‎27-‎02-‎2015 was unexpected.
But when I try to find some entry corresponding to that time i see none!
System:
* Information 27-02-2015 10:25:53 Kernel-General 12 None
* Information 27-02-2015 10:22:50 Service Control Manager 7036 None
Application:
* Information 27-02-2015 10:26:05 User Profile Service 1531 None
* Information 27-02-2015 10:21:11 ClearCase 1024 View
I ran the MiniToolBox to get a comprehensive list of errors that I'm having in this machine and hoppe that you can help me, pleaseeeee...
MiniToolBox by Farbar Version: 30-11-2014
Microsoft Windows 7 Enterprise Service Pack 1 (X64)
Boot Mode: Normal
========================= Event log errors: ===============================
Application errors:
==================
Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt) (User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider) (User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt) (User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
System errors:
=============
Error: (02/27/2015 10:26:07 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
Description: The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
Error: (02/27/2015 10:26:05 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/27/2015 10:26:04 AM) (Source: EventLog) (User: )
Description: The previous system shutdown at 10:24:57 on ‎27-‎02-‎2015 was unexpected.
Error: (02/27/2015 02:27:28 AM) (Source: Microsoft-Windows-GroupPolicy) (User: NT AUTHORITY)
Description: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy
has succesfully processed. If you do not see a success message for several hours, then contact your administrator.
Error: (02/27/2015 02:27:26 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/27/2015 02:27:25 AM) (Source: EventLog) (User: )
Description: The previous system shutdown at 02:26:03 on ‎27-‎02-‎2015 was unexpected.
Error: (02/26/2015 08:57:10 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/26/2015 08:56:49 AM) (Source: Service Control Manager) (User: )
Description: The Serviço McAfee Framework service did not shut down properly after receiving a preshutdown control.
Error: (02/25/2015 11:46:47 AM) (Source: NETLOGON) (User: )
Description: This computer was not able to set up a secure session with a domain
controller in domain PT-RD due to the following:
%%1311
This may lead to authentication problems. Make sure that this
computer is connected to the network. If the problem persists,
please contact your domain administrator.
ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it
sets up the secure session to the primary domain controller emulator in the specified
domain. Otherwise, this computer sets up the secure session to any domain controller
in the specified domain.
Error: (02/25/2015 11:46:45 AM) (Source: EventLog) (User: )
Description: The previous system shutdown at 11:45:21 on ‎25-‎02-‎2015 was unexpected.
Microsoft Office Sessions:
=========================
Error: (02/27/2015 10:27:54 AM) (Source: WinMgmt)(User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:31:24 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:16 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 04:16:15 AM) (Source: Spiceworks Cloud Services WMI Provider)(User: )
Description: Could not find a part of the path 'C:\Windows\system32\Spiceworks\logs\spiceworks_wmi_provider.log'.
Error: (02/27/2015 02:29:00 AM) (Source: WinMgmt)(User: )
Description: //./root/CIMV2SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 990x80041003
CodeIntegrity Errors:
===================================
Date: 2015-02-11 18:03:17.169
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-11 17:50:22.246
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-10 18:04:17.899
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-10 09:43:55.630
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 19:24:39.416
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 18:23:59.507
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 18:08:08.200
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 17:54:14.784
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 17:45:34.193
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
Date: 2015-02-09 17:23:19.617
Description: Code Integrity is unable to verify the image integrity of the file \Device\HarddiskVolume2\Windows\System32\l3codeca.acm because the set of per-page image hashes could not be found on the system.
=========================== Installed Programs ============================
Cloud Services WMI Provider (HKLM-x32\...\{DA507693-A089-4D66-B88F-C468AE658FE5}) (Version: 1.1.5464.28193 - Spiceworks)
CRT-71 (x32 Version: 1.00.0000 - IBM) Hidden
GSKit8 SSL 32-bit (x32 Version: 8.0.50.16 - IBM) Hidden
IBM Installation Manager (HKLM\...\IBM Installation Manager) (Version: - )
IBM Rational ClearCase (HKLM-x32\...\IM-com.ibm.rational.clearcase.nt_i386) (Version: - )
InstallAnywhere 2012 (HKLM-x32\...\InstallAnywhere 2012) (Version: 14.0.0.0 - Flexera Software LLC)
McAfee Agent (HKLM-x32\...\{EBF3D65F-011E-44D2-8F4F-C74B52682EDD}) (Version: 4.8.0.1500 - McAfee, Inc.)
Microsoft .NET Framework 4.5.2 (HKLM\...\{92FB6C44-E685-45AD-9B20-CADF4CABA132} - 1033) (Version: 4.5.51209 - Microsoft Corporation)
Microsoft .NET Framework 4.5.2 (Version: 4.5.51209 - Microsoft Corporation) Hidden
Microsoft Silverlight (HKLM\...\{89F4137D-6C26-4A84-BDB8-2E5A4BB71E00}) (Version: 5.1.20913.0 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (HKLM-x32\...\{710f4c1c-cc18-4c49-8cbf-51240c89a1a2}) (Version: 8.0.61001 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (x64) (HKLM\...\{ad8a2fa1-06e7-4b0d-927d-6e54b3d31028}) (Version: 8.0.61000 - Microsoft Corporation)
Microsoft Visual C++ 2005 Redistributable (x64) (Version: 8.0.59192 - Microsoft Corporation) Hidden
Microsoft Visual C++ 2008 Redistributable - x86 9.0.30729.17 (HKLM-x32\...\{9A25302D-30C0-39D9-BD6F-21E6EC160475}) (Version: 9.0.30729 - Microsoft Corporation)
Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219 (Version: 10.0.40219 - Microsoft Corporation) Hidden
Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 (x32 Version: 10.0.40219 - Microsoft Corporation) Hidden
microsoft.vs6 (x32 Version: 1.00.0000 - Your Company Name) Hidden

Hi JoseRebelo,
According to the title ,do you mean the host machine will reboot when we start the virtual machine and the virtual machine will crash or just the virtual will reboot ?Have you got a BSOD(Blue screen) ?
Did the issue occur before ?Have you installed any third party software recently ?
Please ensure the host machine has got the latest updates.
I suspect there may be a third party conflicts here.
Please try clean boot to have a troubleshoot .
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135
If the issue occured recently ,we can try to perform a system restore to recover the machine to a previous point ot have a check.
Best regards

Z68a-G43 (g3) overclocking has failed message/boot problems

Mobo- z68a-G43 (g3)
Cpu- Intel Core i5 2400 3.10ghz
Memory- Kingston 4gb (2 sticks)
VGA- NVIDIA GeForce GTX 460
PSU- Thermaltake TR2 600w
Windows 7 Ultimate 64bit Service Pack 1
I just built this computer two months ago and it was running perfect. Then I started getting a black BIOS screen when ever I turned the computer on. It said "Warning! Previous overclocking has failed. Press F1 to go to set up. F2 to reset settings and continue." This confused me because I have never put it into overclock. Soon after when I tried to turn my computer back on it would not boot. It tries to boot up several times and only the fans spin. The only way to stop it is to turn the power switch on the psu off. After all this occurred my psu would no longer work either. I sent both my mobo and psu in for warranty and just now got the new ones back. I put it all together and it was working perfectly. A few days later the same message came up again "Warning! The previous overclocking has failed. Press F1 to go to set up. F2 to reset settings and continue." I reset it to the defaults and all the BIOS are updated but it has happened again. My computer will no longer start up but my psu is still functioning at least this time. I have reset the CMOS, tried one stick of RAM, took the comp apart made sure everything was firmly in place and put it back together, and tried unplugging everything but the basics but still the same issue fans run and it keeps trying to start up over and over and never boots. I refuse to believe that this mobo is broken because it is brand new. I was wondering if there is some sort of compatibility issue or voltage problem but I can't figure out what to do. Please someone give me some help. It is very much appreciated.

Thanks but I finally figured out the problem. The socket is set to 1333MHz and I have my RAM at 1600MHz. I just had to manually clock it higher becasue that is overclocked.

"The previous performance of overclocking is failed"

Similar Messages

Maybe you are looking for