The print face is too small

When I print using the latest version the type face is too small.
This happens on many sites.

File > Page Setup = '''Scale'''
That's the control for printed font size.

Similar Messages

When I print a Word document to a shared printer, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines.

When I print a Word for Mac document to a shared printer (that is connected to my iMac) from my Macbook Pro, print preview looks fine but the printed page has too much blank space at the top and doesn't print the bottom few lines. I have tried to adjust the margins and the page setup settings but to no avail. It used to print fine until recently. Is there a way to fix it so that the printer prints what print preview shows?

I should add that when I e-mail this document to myself and print it directky from the iMac, it prints fine.

How can I perform the conversion of pdf files in Cyrillic script to Word files in Cyrillic script. The pdf file is too small for me to read right now. Julyan Watts

How can I perform the conversion of .pdf files in Cyrillic script to Word files in Cyrillic script. The .pdf file is too small for me to read without a magnifying glass, and the document is more than one thousand pages.

This answer was not helpful. First of all, I could not find "tech specs"
anywhere on the Acrobat 11 homepage. And secondly I purchased this software
for the specific purpose of converting .pdf files to Word. It was only
after I had completed the purchase that I learnt that Acrobat does not
permit the conversion of .pdf files in Cyrillic to Word files in Cyrillic.
I feel that Acrobat should have provided this crucial information before I
allowed my credit card to be debited. That is why I am now asking for my
money back. But thanks for your attempt to solve my problem, even if it was
not successful.
Julyan Watts

TS1347 Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Just downloaded ios7 on my iPad2. Hate that I cannot see the items in my calendar. The letters are way too small and are grey in color. I need the fonts to be dark and very defined...I have health issues-poor vision.

Settings>General>Accessibility>Increase Contrast
Settings>General>Accessibility>Bold Text
are some settings that may help.
There are other settings there ...they may not be to your liking but try them all anyways.
But that's about all you can do for now...except to voice your opinion to Apple here:
http://www.apple.com/feedback/ipad.html

The font size in the menu bar is too small (unreadable). How can I increase font size. I have a new Samsung PC with high resolution screen.

Hi the fnt size in the menu bar is too small (unreadable). How can I increase the font size. I have a new Samsung PC with high resolution screen.

You must mean Photoshop Elements 11, not Photoshop.
There is no ability to change the size of the menu font in PSE 11.
note to mod:
Please move to the Photoshop Elements forum.

Vista & Outlook 2007: Sync with second XP & Outlook 2003 - The passed buffer is too small for the reply data

Dear Community,
I'm synchronising my T3 with two PCs. One with Vista & Outlook 2007 and the other with XP & Outlook 2003. Both with the latest conduit & Hotsync Manager versions installed for each OS based on the availability on the Palm Website.
My problem is that when I synchronise the T3 with either PC and then try to sync it with the other I'm receiving the following error message for the Calendar:
Outlook Calendar
The passed buffer is too small for the reply data.
OLERR:0D-0008
OLERR:0D-0004
OLERR:0D-0001
- Slow Sync
Outlook Calendar synchronization failed
The second time the sync is successful but takes a long time and the actual problem is that it creates duplicates for records previously changed on either PC - but with a sync in between those changes, i.e. no conflict in the sense that the same record was changed in both environments since the last sync. I have configured the conflict handling to establish a hierarchy PC1-T3-PC2 but try to avoid them by synchronising as often as possible.
Has anyone come across that problem or any ideas? Can you somehow adjust the buffer size for the sync? I have been using Lotus Organiser & then the various Outlook versions for a number of years.
Thank you
Rainer
Post relates to: Tungsten T3
Post relates to: Tungsten T3

As they say on TV, "Doh"!!!
I figured out the problem. I started the Sync tool, selected "Settings", then "Mcrosoft Outlook" tab and then "Select Folders" button. I browsed to the proper folders in Outlook (Calendar, Tasks, etc). Select OK enough times and retried the sync.
It worked.

HT1750 The serial # is way too small to read!!!! Make it BIGGER!

The serial # is way too small to read!!!! Make it BIGGER!

You are talking to users like yourself, not Apple. Try here to talk to Apple. In the meantime, if you select About This Mac in the Apple menu and then select More Info, you'll find the serial number there too. And if that is too small you can copy it just as if you were using a word processor and then paste it into a text editor and make the font bigger.

The photos are far too small on Ipad ?

I need to find out why the photos are way too small on the Ipad. I used a filter on a photo then sent it to a friend . Way to small to use for any purpose.
any way to make larger?

I have the same problem and cannot tackle it down yet. Using handbrake and itunes to sync movies and the subtitles are very small.
Hope someone could help.

Hi! I'm from Brazil and I'm having troubles with subtitles. Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

Solution found.
I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
DO NOT INSTALL VODAFONE APP FROM THE APP STORE.

How do I change the font on this new 27" IMac I have just bought for 2200.00 and can't read as the font is far too small.I have contact lens and but have to strain with face close to the screen to see the words. What a major rip off disappointment ,

I have spent hours trolling through help lines to change the font from minature text which I cannot see on my new 27" screen. Why does something so simple have to be so complicated ???this computer is supposed to be the be all to end all..just setting it up with printer , router etc has been a nightmare as the print is so small I need to have my eyes 2 inches from the screen to read anything ..What have they done ?

Not an ideal solution, but some users change the setting in: System Preferences>Displays, select the Scaled button and choose another resolution.
If you are within 14 days of purchased you can return the computer for a refund if you dislike it that much as Apple do have a good returns policy (so long as you purchased from Apple and not a reseller).

The print screen is too bigh to display.

I am using the latest version of readerx. when I hit the print button, the next screen displays too large for me to read and make any option changes. How do I correct this? I'm using Windows 7 Home Edition

What is your Reader version?
This is how the print panel looks on my smaller resolution screen:
See also if anything in this topic helps http://forums.adobe.com/thread/774179

I cannot read your e-mail to me as the e-mail is too small

''duplicate - https://support.mozilla.com/en-US/questions/902425''
You sent me an e-mail and I cannot read it because it is too small, I need to know how to fix it so it is the normal size. I cannot read anything on the e-mail at all.

See this:
https://support.mozilla.com/en-US/kb/Page+Zoom

Printer output incorrect/too small after upgrading to VS 2010 Crystal

I have a Windows Form application that was originally written using .net 3.5 and the version of Crystal Reports that came with Visual Studio 2008. When the VS 2010 release of Crystal Reports came out, I upgraded the application to .net 4/VS 2010 and the new Crystal release.
This application prints checks on blank check stock, so alignment of the output has to be very exact to print the checks correctly. It prints the reports using the PrintToPrinter() method of the ReportDocument class.
In the original version of the program, I had everything aligned correctly in the check report. After updating the application to the latest Crystal release,but making no changes to the report itself, I noticed that the alignment of the checks report was incorrect.
After comparing the output, I was able to determine that the new output is slightly shrunk compared to old output, almost as if it is scaling the report in some way.
I opened the report in the new report designer and verified that all page size and margin settings were correct/the same as before, and they were. The printed output is smaller than it should be based on how the report is designed. I tried adjusted the paper size, and also tried the "Dissociate Formatting Page Size and Printer Paper Size" to see if I could somehow adjust for the scaling, but nothing I tried was successful.
Our check printer is a HP LaserJet 5Si. During my investigation into the problem I discovered that if I printed the report to a pdf printer (PDFCreator) the resulting pdf did not have the same scaling/shrinking problem that I get when the report is sent directly to the LaserJet. I also printed a page from the pdf to the LaserJet using Acrobat Reader, and the output was as I expected it to be.
I only seem to be seeing the scaling/shrinking problem when I send the report directly to the LaserJet. Is there some new setting that I'm overlooking that would be applying some sort of report-wide scaling? Any other ideas as to why this is happening?

Looking for HP LaserJet 5Si at the HP website:
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25478&taskId=135
I notice that there are several different types (hm, mx, nx, ...). Also, there are different drivers, depending on the OS.
Ensure that you are using the correct driver (hm, mx, nx, ...) for your printer and for your OS and that the driver has the latest updates from HP.
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Print font size too small

When printing in Safari, the print size is tiny, both in email and web sites, smaller than it appears on screen. When using Internet explorer or Firefox it prints the right size. If I go to Safari edit, preferences, then appearance, and raise font size, it will print larger, but all font sizes on web pages are way big. How can I just increase the print font size. My IP is Comcast. OS is Win XP sp3.

It should print the same size. Click View -> "Make text bigger" before printing.

The toolbar font is too small in photoshop 12

Photoshop 12
Toolbar font is too small how do you adjust it to make it readable

There are some add-ons that can be used to change the zoom level on all sites, for example:
* NoSquint - https://addons.mozilla.org/firefox/addon/nosquint
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/default-fullzoom-level

The print face is too small

Similar Messages

Maybe you are looking for