The print is too big for the page, some of the article is cut off . Why?

The printer was working fine. Suddenly that changed. Now when I print, the print is huge and a large part of the text is cut off. I tried reducing the size of the font but that did not help. This had happened to me before about a year ago and I tried different things with firefox and was finally able to fix it. However, this time I have tried all your troubleshooting tips and nothing works. The print function was working normally up to a couple of days ago and to the best of our knowledge neither my husband and I have made any changes to the settings.

Firefox > Print -> Print Preview = what is the '''Scale''' set for?
'''Shrink to Fit''' is usually the best setting for most web pages.

Similar Messages

When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

I have the exact same problem, I think. I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE. So big I could only see one or two icons. I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar. I finally just had to wait for the battery to die, then recharge it, and it looked normal again. I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them. I checked my accessibility settings, and Zoom was already off. So what is causing this problem for so many people, and what can we do to prevent it? Please help.

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I created a magazine using a IDD template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help :)

I created a magazine using a template including bleeds. When I exported to make a PDF, it cut off part of the document when uploading for printing. When I incude bleeds, it makes the document too big for printing. I need help

eehenry wrote:
It is a problem with a secondary provider, "mag cloud" .
Right, so to advise you we'd need to know the particulars of MagCloud's spec for your project; format, trim size, bleed, etc.
It's doubtful that anything happened "when uploading for printing," so long as you were uploading a PDF, as opposed to the native InDesign file. Did the PDF look right to you before uploading?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

My iPad standard window is bit too big for the screen.

My iPad screen unexpectedly got slightly too big for the display window. The size is bit too big. For example, the keyboard when it pops up does not fully display all tkey sans. Another example is the time/power remaining bar slips out of sight. Did I accidentally change something? Is this an issue with version of iOS that I am using (4.3.3)? (Note I'm not talking about resizing by using your fingers.)

John,
I am having the same problem. The enlargement is not the same as the 3 finger tap or the 2 finger zoom. The screen opens and then bumps to a slightly larger screen just enough to make it too big to see the outer edges. You can put 3 fingers on the screen and move the screen to see the edges but you cannot get it to shrink to the correct size. This is the second time this has happened to me. I am also having some other issues. Sometimes while in an app the app will close and I will be diverted to the home screen. And sometimes when playing "with Friends games" the letters on the letterboard (not the key pad) disappear, will not move or are giant. I plan on taking it back to the Apple store this week but I hate the idea of having to start over.

Why is itunes too big for my screen? i'm on the highest resolution. i'm on windows 7 on a sony vaio ! please help !!

why is itunes too big for my screen? i'm on the highest resolution. i'm on windows 7 on a sony vaio ! please help !!

Resize it.

The size of my exported FCP movie is too big for DVD studio pro

Hey,
I have been editing for 4-5 years now and have never had a problem with size of a project to put into DVD Studio Pro to burn. However, I just finished a 2 hour project in which exported as a FCP movie it is 23.97 gb in size. When i put this into DVD Studio Pro it makes it 4.8gb in size which just makes it too big for it to burn. I have tried changing the compression to no avail and just now decided to clean up the timeline so everything is on one track with nothing overlapping. (The problem was it was a 2 camera shoot so the first camera i had on the bottom track constant with the second camera on the top track when i needed it but still with the first camera underneath.) Do you think this could be the solution to my problem? If you guys could help me out it would be most appreciated!

some things don't make sense here. please clarify.
Standard DV is roughly 5 minutes per gig, so that means that you have just about 2 hours of video, ok, got that. Now it's the two track thing that gets me.
Are you saying you have 4 hours of footage, the same thing from two cameras, and you're trying to set up a multi-angle DVD?
If it's just that you used two video tracks to edit, then NO, it is not your problem. It's still only 2 hours, the video will be mixed down to one track upon export from FCP to quicktime.
My suggestion is, instead of bringing a quicktime file directly into DVDSP, use compressor. I believe they have a preset in compressor 2 for a standard 120 minute DVD. IF you're project is truly less than 120 minutes, than that should be fine. If not, then you may have to manually make your own setting and lower the bitrate.
So the workflow is:
-open sequence in fcp
-file>export>quicktime movie... (you can uncheck "make movie self-contained" if you want it to export faster and you plan on keeping your original capture footage around)
-export your movie to a directory of your choice with a name of your choice.
-open compressor (in applications)
-drag the quicktime file you created into compressors main window, this will set it up. Now specify the export setting (120 minute HQ all files either 16x9 or 4x3 dep. on project) and specify a location for the files to be created. I strongly suggest that you use the HQ (High quality) settings in compressor. It's much slower to process, but much better quality.
-with a 2 hour movie it should take a really REALLY long time to compress, so I'de say do it over night.
-when compressor is done, you should have 2 or three files. a .m2v file a .aif file, and a .ac3 file. The .aif is your PCM audio, much better quality than the .ac3, which is dolby 2 channel. However, the .ac3 is a much smaller file with a lower bit rate, so if the .aif makes the DVD file size too big, you can switch it out for the .ac3
-Finally, open up your DVDSP project, drag the .m2v, .aif, and .ac3 into DVDSP and use the .m2v for the video track and either the .aif or .ac3 as the audio (as mentioned above)
-the good news is, your DVD media is already rendered, so when you go to build your DVD it will go much, much faster!
By the way, I recommend you go to file>advanced>build do not do a burn and build.
I find it best to build the VIDEO_TS folder on a hard drive and then use a program like toast to create a DVD (using toasts from VIDEO_TS option). This method also allows you to go back into DVDSP, make tweaks, and reuse your VIDEO_TS folder, not having to rebuild the whole thing each time.
Remember, 120 minutes on a single layer DVD is going to render fairly low quality no matter what.
If you have a newer mac and a dual layer drive, you may want to cough up a few bucks and get a dual layer DVD-R, then you have over 8 gigs of space to work with, perfect for HQ 2 hour footage.

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waiste

My CS3/PS has started to change the cursor into a line of three VERY small icons when dragged over a picture or menu. Thus it is VERY difficult for instance to drag a layer in the layer list to the wastebasket - the cursor simply is too big for the waistebasket icon. Even all other exact work is impossible. Of course I have checked all the cursor presets but nothing seems to help. My OS is Windows7.

Have you tried resetting Preferences?
A logical next step would be to reset your Preferences.
To reset Preferences:
If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

Desktop is too big for the display

Some how this morning while on my Mac a display setting or something was changed. If your on the desktop, with all windows closed, the background, icons, dock.....everything is too big for the display. If you move the cursor all the way to left it will 'slide' the desktop in that direction. Move it all the way to the right edge of the display and it 'slides' the desktop to the right until you reach the edge. Also the same for the up or down directions.
At first I thought it had something to do with the multi-touch track pad, but I don't think so. I have checked all the display settings I can think of and have tried re-sizing the desktop to all other settings in an attempt to fix the problem. Additionally I have restarted/shutdown the computer totally to see if it would fix the issue. No success. Please help.
Thx,
Audioboy

I had the same problem, but the zoom was already off. So I went under "options" and unchecked "use scroll wheel with modifier keys to zoom," and that took care of it.
Thought that might help some others who find this thread.

"[Filename]" is too big for the trash. Would you like to delete it permanently?

Recently, when I delete files, I am getting a message stating, ""[Filename]" is too big for the trash. Would you like to delete it permanently?". This recently started showing up for no reason and in the past I have deleted files significantly bigger and not recieved this message. Any ideas why this is showing up and how I can stop it from happening?
For reference, I have a 768GB SSD with approximately 470GB of space available so space is not the issue.

nbar, it seems that this trash issue is a reoccuring issue and that it is resetting itself. I followed the article that provided a link to, but after following the steps and finding success, it started doing it again.
If anyone has any idea on what might be causing this issue, it would be greatly appreciated...not a life or death situation...just really annoying.

Screen on my phone it seems to be too big for the phone

Don't know if this a major problem but its bloody annoying! I've installed os 3.0.1 on my iphone 3gs 16gb and there was no problems, however when I looked at the screen on my phone it seems to be too big for the phone, only by 1-2mm. I'm able to move the screen either up or down by touch but its annoying, I can either have my signal strength, clock and battery showing or the phone,mail, safari and ipod at the bottom, obviously I keep the top of the screen visible but it wasn't like that before I downloaded that stupid update!! I would rather go back to 3.0 but I can't find it anywhere? any ideas anyone

Have you zoomed in a little as per p. 187 of the manual... http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf
If not, try resetting your iPhone by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Scanned doc now too big for print

Hi,
I have scanned this sheet and modified it, now i need to print it back but photoshop says its too big for print.
Indeed it just printed a portion of it.
Can someone with experience of this kind of issue explain me the technicalities and what should i do?
I know photoshop only when it comes to chop pictures, put loads of filters and make them jolly, i am not into stuffs like scan/sizing/printing, etc., so please don't explain to go down to the basic basics in your explanation.
Thanks

Well, when you say "Manufacturer's software" I assume you mean the scanner's software and NOT Photoshop. It is best to scan directly into Photoshop by using the menu File>Acquire Image>[select your scanner source--either the scanner name or TWAIN driver]. When this is chosen your scanner's driver will launch a "plug-in" software interface that will allow you to scan the document and set a marquee around what you want to scan and also choose the resolution. After that you will be able to save the document -- give it a unique name like "file.psd" -- and then make changes -- again give it a unique name like "file_edited.psd". The document measurements you gave us seem to fit within the bounds of a United States (US) Letter size document which is 8.5 inches x 11 inches. If your printer has the ability to print borderless documents you should be able to print this document without a problem with a resolution of 300dpi. It is possible that it would not be able to if there is not enough memory on your printer and that is why you get the error message. (But as a JPG image the file size will be compressed, so I'm not really sure why your document would be too large.)

Yahoo page is too big for monitor screen. How doI reduce size of yahoo page?

When I open firefox the yahoo home page is too big for the size of the monitor.

Hi,
Try resetting the zoom by pressing '''Ctrl''' + '''0''' (zero) on the keyboard. Please [https://support.mozilla.com/en-US/kb/how-do-i-use-zoom?s=zoom+feature&r=0&as=s see this.]
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off

I'm running Adobe 9 pro on snow leopard and when I save or print from word for mac 14 the bottom gets cuts off. Can someone help?

Ah! You're creating a PDF out of Word through Acrobat. The cutoff is most likely being affected by the printer chosen.
When you call up the print dialogue in Word, check to see what printer is being used. If it's a typical inkjet printer, Acrobat is using the print margins of that printer as the cutoff area. Since most such printers can't print to the last inch and half or so of the paper, that's where it would be cut off.
Near the bottom, under the preview of the document, click on the Page Setup button. It doesn't really matter which printer you select here. Under Paper Size, choose Manage Custom Sizes. Under the Non-Printable Area heading, choose the same printer and set the paper size you're using.
Note that the unprintable margins for that printer will be filled in automatically. That's what's being cut off. Click the + button to create a modified version. The default will be "Untitled". Give it a new name if you want. Then set all of the margins to zero. Click OK. Now you'll have that as a choice under Paper Size. Doesn't matter that the actual printer can't use this setting since you're going to a PDF. Click OK to get back to the main Word print dialogue.
Now choose Save as Adobe PDF. It should give you an exact duplicate of what's on screen in Word since as far as Acrobat is concerned, your "printer" has no unprintable margins.

The print is too big for the page, some of the article is cut off . Why?

Similar Messages

Maybe you are looking for