The printed doc. comes out darker than the color choice. Help!

I have an 8500 pro all in one. Printing on transfer paper. The color comes out darker than the one I select on the color chart. What to do?

notverybright,
You may have a quick look at Gamut here:
http://en.wikipedia.org/wiki/Gamut
Color management - Wikipedia, the free encyclopedia
CMYK color model - Wikipedia, the free encyclopedia
http://en.wikipedia.org/wiki/RGB_color_model#Physical_principles_for_the_choice_of_red.2C_ green.2C_and_blue

Similar Messages

  • Prints always come out darker than in lightroom

    I have a iMac, keep my screen calibrated using x-rite. I have found that all my prints come out darker than what I am seeing on screen. It almost seems like when I export a RAW file to JPG in lightroom it converts it to a denser image. As if it were taking 1/3 of the exposure out. I have done experiments with my own printer at home, as well as with two different labs here. I have downloaded the icc profiles of the different labs and have used PS4 to preview my images. There is no comparison and I can not see what step I might be missing to complete the process from image on screen to image on paper. Any help?? Thanks.

    True, I have seen a difference in the density of the prints from the lab and from my home printer and it is possible that I have used the printer settings in lightroom incorrectly. It is interesting that the prints from the lab are much denser than what I see on my screen. I loose overall brightness and detail in the shadows. It seems like my colors are correct but with the loss of brightness it is hard to tell exactly. It almost seems to me as if somehow the conversion that lightroom does has something to do with how it is interpreted by the lab printer. The first test I did was to use the printer wizard (I have a cheapie epson home printer, epson stylus 405) just to see what would happen. My print came out EXACTLY as I see it on screen. That is what is my challenge. I can attach a file if it would help. THanks for all your responses.

  • When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    Crop to the print size before pringing
    LN

  • HP C410 - The pics that I print come out darker than the one on the screen. Why is this?

    I ahve a HP Photosmart C410.  When ever I print pictures they are printed darker than they appear on the PC screen.
    How can I correct this??

    You're right - by default the PDF will be created at the same size as your selected paper size at the time you create the PDF.
    The simplest workaround should be to just create a custom paper size - in File -> Print, look for the Page Size popup which should list every paper size supported by your printer. At the bottom is a 'Custom Size...' option that lets you create custom paper sizes, including your 11 x 17" size, even though that's bigger than your printer supports.
    Select this custom size the next time you print to PDF and you should be OK.

  • I have two printers:  Epson XP-950 and an hp Photosmart 7520.  Both print photos that are darker than they appear on the PC screen.  What can I do to set them to printg what is shown on the screen????

    I use Photoshop Elements 12 for my photos.  I have a constant problem where my photos don't print like they appear on the screen.  They come out darker than the screen shows.  If brighten them in the program, I have to almost make the photo appear "white" in order to look good printed.   ??????  What can I do to fix this problem?? 

    sneakypete1 a écrit:
    I use Photoshop Elements 12 for my photos.  I have a constant problem where my photos don't print like they appear on the screen.  They come out darker than the screen shows.  If brighten them in the program, I have to almost make the photo appear "white" in order to look good printed.   ??????  What can I do to fix this problem??
    I am ready to bet that your display is much, much too bright (like all displays at factory settings.
    Why Are My Prints Too Dark

  • Why is the print out darker than the colors on the screen?

    This is happening in both Photoshop and Illustrator.  My prints of my work come out darker and grayer than the bright colors on the monitor.  I am on a Mac OSX 10.6.8. 
    When I adjust the Color Settings from the Edit drop-down in both programs to "Monitor Color" that still doesn't help.  And a dialogue box tells me to fix the problem in Bridge.
    Can I fix this problem in Bridge or is this more smoke n' mirrors?
    Thanks!

    notverybright,
    You may have a quick look at Gamut here:
    http://en.wikipedia.org/wiki/Gamut
    Color management - Wikipedia, the free encyclopedia
    CMYK color model - Wikipedia, the free encyclopedia
    http://en.wikipedia.org/wiki/RGB_color_model#Physical_principles_for_the_choice_of_red.2C_ green.2C_and_blue

  • Why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

    why does my scanned docs. come out with all colored lines on it after going thru the top feed try?

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model and your operating system help out a lot.
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • .swf image comes out lighter than the source

    I'm creating a simple animation in AE from a jpeg image. I bring up some text on the image. When I create the .swf file, the background that the text appears on is lighter than the original jpeg in the Safari browser. Since this animation "tiles" into the page with other jpegs sharing the same background image, the light background produced by the .swf stands out from the rest of the page.
    This only seems to appear in the Safari browser under OSX. FireFox doesn't have this problem. However, since I need this to work across all browsers, I need to solve this issue.
    If I make a .mov file instead of a .swf, it also appears lighter than the source.
    In fact, if I simply take a jpeg image and create a 1 frame .swf from it, it comes out lighter than the original. I'm not doing anything to the image (as far as I know) that would make it lighter.
    Any insight to what is causing this problem would be greatly appreciated.

    It's ColorSync and how it is used throughout your system, even if only for on-screen Gamma correction. In so many words: There's nothing you can do about it but to reset your settings and turn it off wherever that is possible. Not on my Mac ATM and not using Safari anyways, but I'm reasonably certain there's an option for using the system color settings somewhere. Depending on how you process the JPEG you may also need to fiddle with the color settings for the Adobe suite. Flash itself is not color profiled, but it will respect embedded proviles by ways of its image loaders that it shares with Photoshop and al lthe other apps. Beyond that I wouldn't get too crazy over it: Color mismatches and shifting alignment are a natural bane of all web development, and even if you get it right on one machine, the next day another user will tell you that it looked crap on his machine in Konqueror on Linux.... More than anything else, webdesign is a matter of using the design to cheat around these limitations, unfortunately. Perhaps you can use a large background Flash file instead of the original JPEG and then put your HTML content onto a separate DIV layer...? ;-)
    Mylenium

  • Why do my prints come out dark? All other CC software prints ok except Photoshop.

    I have CC with Photoshop, AI and ID. When printing from Photoshop all prints are 2 stops darker than when I print using other software. Any advice?
    Mike

    Here are a couple of screenshots for printing to my old Epson 2200:
    Always allow Photoshop to manage colors, and choose the right PPD. Note that the PPD matches the paper chosen.

  • Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

    Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

    Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
    If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

  • My Iphone 4 suddenly blackout and restart by itself. After that it reach the restore screen. Tried to do restore but it come out Error (9). Anyone can help?

    My Iphone 4 suddenly blackout and restart by itself. After that it reach the restore screen. Tried to do restore but it come out Error (9). Anyone can help?
    I tried to restore in normal mode and DFU mode, both of it still give me error (9).
    I tried using other cable and computer but it still the same.
    Anyone out there having the same issue that can share?
    Is this a hardware or software issue? My warranty already over and have to solve this problem by myself.
    Please help.

    Did you check your security software settings?
    Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    copied from Update and restore error messages on iPhone and iPod touch

  • Printing faxes come out black

    I began using the Fax utility in 10.4.3 last week. The faxes are received without problem and stored as pdf files in a folder. When I open to read they open in adobe and look fine. When I print they come out with white text on a black background. Other pdfs not created by the fax print normally. Have tried various printers with same results. Any thoughts?

    I am in the same boat - using a brand new Konica Minolta C450 Biz-Hub Expensive as can be printer with built-in Fiery. Same output, a black page from PDF'ed faxes. They even look good from the print dialog box in "Preview" mode. Then it prints black, with what appears to be a row of black thumbnails of the same page across the bottom.
    The same fax PDF will print on my old HP 4050N, however, without any problems. I suspect that there is an issue between the creation specs used by Apple and the requirements on the Fiery. Maybe a similar issue for you as well.
    Just throwing in my two cents to see if anyone may reply to this problem.

  • HT4356 When I try to print a pic from iPad to my HP air printer, it comes out all smeared and wet. What's wrong?

    When I try to print a pic from iPad to HP air printer, it comes out smeared and wet. What am I doing wrong?

    I can't swear to it, but it's probably a printer issue and I don't think it has anything to do with the iPad. Have you tried printing right from your computer?

  • I have a pdf file filled out but when i print, the doc comes out blank

    I have a pdf file filled out but when I print, the document comes out blank

    Is the base form printed?
    If so, in the Print Dialog, verify that in the Comments and Forms field > Document and Markups is selected

  • Ordering prints - They come out of order!

    Hey everyone,
    Whenever I order prints through iPhoto, they look great but always come out of order! If it is an event from start to finish, you want them to come in the order they were ordered in!
    Has anyone seen this problem, or better yet, found a solution?
    Thanks!

    Yes, everyone who orders prints sees this and it's explained here:
    http://www.apple.com/support/photoservices/ordering_options/
    *Will my prints arrive in the same sequence as they were submitted?*
    When you submit an order, your image files are uploaded to Apple's servers. When the lab is ready to print your order, it downloads the images from Apple's servers. During this process, smaller image files typically download more quickly than larger image files. The lab generally prints the pictures in the sequence in which the images finish downloading, which might not be the order in which you submit them. This is common practice among printers of digital photographs.
    There is no solution for this.
    Regards
    TD

Maybe you are looking for

  • Is it possible to use two buttons on a master page to link to consecutive pages i.e. previous or next

    The easiest way to explain what I am attempting to achieve is to create a navigation template on the master page, with two identical arrows, one pinned to the left side, and one to the right, along with a basic 3 button navigation for; home - table o

  • Problem with TreeMap

    I had a problem that I believe was similar to this posting: http://forum.java.sun.com/thread.jsp?forum=24&thread=200558 although mine involves a TreeMap. I am adding approximately 250 mappings to a TreeMap, where the key is a String. Each key is uniq

  • How we can see the abap memory data

    How we can see the abap-memory data fine the code below import lsind          report_title          table_name          report_field          change_display          show_hide          conversion_exits          table_description          form_program

  • Error 56003 building packed library

    Hi I am trying to build a packed library from my project. I keep getting an error both with Labview 10 and 2014: Error 56003 occurred at Invoke Node in AB_Source_VI.lvclass:Copy_SourceItem.vi->AB_Build.​lvclass:Copy_Files.vi->AB_Build.lvclass:Build.v

  • Lost YouTube app post iOS 6 upgrade and using genius

    I upgraded my ipad2 to iOS 6 last night. And now I am unable to locate my you tube app. I also added genius to see what it is ( I have not used this before). I remember that while configuring genius, one of the genius page was hung (I clicked on done