The printer carriage is jammed and locked in place..how do i get it clear to move
my printer carriage won't move back to place...it is jammed in place after I put in a new cartridge
You should contact AppleCare if you don't remember the answers. Depending on a few factors, they might be able to reset those security questions so you can choose new ones and continue using your Apple ID like you were used to.
That's really the only solution if you're sure you don't remember any of the answers.
Good luck
Similar Messages
-
adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html -
I accidenttly deleted my notes and the icloud cleared all the message from both ipad and iphone ...How can i get it back?? If I can ??
Your notes should be stored in your backup, so if you have backed up the iPad and that backup does contain those notes that you deleted, you can try restoring from your backup. If you haven't backed up the iPad since you created those notes, they are gone.
If you backup with iCloud only, restoring from backup involves erasing the device and then going through the setup all over again and finally restoring from the iCloud backup. This article explains the process quite clearly.
http://gigaom.com/apple/ios-101-set-up-and-restore-from-icloud-backup/
If you backup with iTunes, connect the iPad to your computer, launch iTunes and right click on the device name on the left and select - Restore from Backup. But before you do that .... turn off auto sync in iTunes - without connecting the iPad - launch iTunes and go to Edit>Preferences>Devices and check the box at the bottom of that window in order to turn off auto sync.
Email messages are not stored in your backups. -
I just dowloaded Maverick and lost the Apps I purchased: Notes and Bejeweled 3. How do I get them back without paying for them again?
Thanks so much for being out there for me - someone I can talk to. I went to purchases and unfortunately it is no longer there. I dowloaded the Notes App again for free. I will just buy Bejeweled again. I guess the price of downloading maverick was losing my beloved video game. But you have put my mind at ease - I appreciate knowing I did all I could do to recover it.
-
Adobe pushed a security update to my computer and the update failed. Now the "print to PDF" option is missing from all of my programs. How do I get it back?
Version X.1.12.Thanks. That's exactly what I did, but from the Adobe help screen. It did the trick, but I'm not very happy with Adobe for messing up my system.
I appreciate your answering back. -
I turned my iPod cloud function on and find my iPThone turned on and locked. How do I get back in it?
Enter the passcode you used to lock it.
-
I upgraded to the ne software on the I Pad and lost my sync with my verizon yahoo calander. How do I get it back?
Then just select the calendar to sync in iTunes again in the Info Tab before you sync. If you were running iOS 5 and were using iCloud go to Settings>iCloud>Calendar>On.
-
We bought a new Mac bookpro using the latest version of lion 10.8. We also have a c4580 photosmart printer and have bee unable to find a driver down load for this printer and our Macbook. We have tried to use u tube and other sites including Apple support to try to connect to our printer. We run a printer test page and the ip address comes up "not applicable". Do we need to connect the macbook to the router? What are we doing wrong? HP site will not give us a driver download. I have to buy it. Seems simplar to goand buy a new printer but this one is still good. Can anyone help? We are not as software savy as alot of you out there. Thanks.
Download the HP drivers here:
http://support.apple.com/kb/DL907
Download the Epson drivers here:
http://support.apple.com/kb/DL1398 -
Had an icon for enlarging print on e-mail, and it is gone. how do I get it back
actually my father's computer, in another state. He had some work done because it was very slow, and when it was done, the computer was faster, but the icon for print sizes was gone.
See http://kb.mozillazine.org/Zoom_text_of_web_pages
-
HT1222
the passcode is made by the user when turning on the passcode feature on, on the phone
the apple id password that is used for itunes, the app store and icloud email is different and can be reset at iforgot.apple.com -
Please help me with this?
You need to restore the phone from Recovery Mode: If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
-
The print carriage will not move even after the paper jam has been cleared
I had a paper jam this morning and cleared it out completely. I keep getting a message on my HP ENVY 4500 that says the print carriage cannot move. Open the ink cartridge access door, clear any paper jam or obstruction, ensure ink cartridge levers are lower and snapped.
Hi Loleatha,
Welcome to the HP Support Forums!
Is there any visible error message on the Screen of your printer?
You can follow the steps in this link to try and troubleshoot the issue.
Hope this helps.
Thanks!
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue.
Regards,
IdleHands
Although I am an HP employee, I am speaking for myself and not for HP.
*Say thanks by clicking the "Kudos! Star" which is on the left*
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. -
The Print Carriage Cannot Move error message
I tried to align printer because my printing output as been off center. However, when I try to run the align printer function, the printer stops after a few seconds and a few strange noises, and displays the error: The Printer Carriage Cannot Move. There is normally a sheet of paper jammed in the back carriage, but after I clear it, and try again, the same thing happens. Strangely, I don't have the paper jam issue when I copy or print (i just have an alignment problem). Why do I continue to have paper jam issues when I try to run the align printer function, but not any other functions?For instance, when I ran the clean printer function, the paper and the test came through very smoothly. What gives? please help. thanks!
Hi , Welcome to the HP Forums! I see that you are getting the "Print Carriage Cannot Move error message," with your HP Officejet Pro 8600. I am happy to help! It is possible you may have a permanent hardware malfunction with the printer. In order to determine this, please try the steps within the following guides: A 'Paper Jam' Error Displays on the HP Officejet Pro 8600 Printers.'Carriage Jam' Message Displays. Hope these guides will resolve your issue! “Please click the Thumbs up icon below to thank me for responding.”
-
The ink carriage is jammed & will not move out
The ink carriage is jammed &; will not move out when I open the lid to gain access to the carriage
Officejet 7500ASorry that you are having a problem with a carriage jam.
Here is a link that may assist you with this problem.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02282370&cc=us&dlc=en&lc=en&product=4083652&tmp...
Try to move it manually. Unplug it from the back. Leave it out for 30 seconds and plug it back in.
Does it move freely, when you try to move it on your own?
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it. -
I have forgotten my password and locked my phone, how can i clear the problem
I have forgotten my password and locked my phone, how can i clear the problem
By coincidence, this happened to my son just last night. You do NOT have to restore it to a new phone, but you probably want a current backup.
Luckily, you can still sync and back it up even if it's locked, so connect it to the computer you usually sync it to. Go to the summary page. It's easiest and fastest to use a local backup, so if iCloud backup is on, turn it off and click "Backup now".
After it backs up, either click "Restore iPhone", or
- hold home and the top button until the screen goes black, release the top and continue to hold the home button until iTunes says "iPhone in recovery mode detected".
Follow instructions to restore from backup, and then sync to restore content. Your phone will come up in an unlocked state. If you have any stuff that was purchased directly to the iPhone (only), you'll have to re-download it.
Remember to turn iCloud backups back on if you use them.
If you don't sync you iPhone to a computer then I *think* those instructions with the buttons will put it into a mode where you can restore it from the cloud (make sure it is NOT connected to a computer while you do this). Otherwise, you will have to restore it as a new phone, then go to settings, reset, then restore it from the cloud.
Maybe you are looking for
-
I have a current machine Windows 7 Pro with a Cisco VPN 3.5v client that currently connects with access to a customers network. They shipped a second machine Windows 8.1 Pro without adding local accounts, that is pre-joined to a sub-domain the first
-
Release Strategy in "two currencies"
Hi All, We have a requirment to create Purchase Order release strategies for two plants in different company codes- different currencies. For that purpose we made two characteristics with table CEBBAN and field GFWRT and used the currency USD and GBP
-
Hello exper, I want to use dynamic lov for parameter. when editing this parameter, I select "dynamic" for lov, "account_id" for value. but no list of value for this parameter in the parameter dialogue. My data source is oracle stored procedur
-
I am web designer developing with web standards and semantic html. I've worked with struts before, with it I had easy control over the tag soup sent to the client, it was easy to markup using semantic html/xhtml. With jsf I have less much control ove
-
I think that it wasn't possible in the previous versions of java. The next code compiles fine with jdk1.5.0: public class Test { public static void main(String[] args) { int[] arr1 = {1, 2, 3,}; // <- last comma String[] arr2;