The printer is an HP 2680 and it states it is out of paper.

This printer is connected to an HP Pavilion dv7-1451nr laptop. This was working in the past. We haven't used this printer for a couple of months, my wife doesn't print much, but I wanted her to have a printer. It is giving us an error that the printer is out of paper, but that is not the case. I removed the back, and there is nothing jammed up in the printer. The arm that feels for the paper seems to be working correct. Can you tell me what I might try to fix this? Thank You.
Sorry, I was working on this again, and discovered that the paper was not pushed in all the way. Thanks for all the help.

Try the troubleshooting steps in this document.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.

    I have just updated Acrobat to version 10.1.13. I am using a MAC Running Yosemite.  When I try to scan a document, after the printer scans Adobe Acrobat quits and I get an unexpected closure error.  I am running Mac OS 10.10.1.  This only started happening when I installed the update of Adobe Acrobat.

    Hi MEW1,
    Is the printer connected wirelessly or wired?
    Go to Preferences and under categories go to > Convert to Pdf then select the Image Capture and then hit ok button.
    Close Acrobat and then relaunch it and see if it helps you while you do scanning.
    Regards,
    Rave

  • I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Pro

    I just purchased Adobe Acrobat Standard DC andf upgraded from Acrobat XI. When I instalkled it on my PC the print Production Tools were there and functional. I installed it on my Laptop and those tolls are not there. What do I need to do to have Print Production Tools on both computers?

    This is quite odd. I wonder if you could try something for me on EACH computer.
    Use Help > About Adobe Acrobat DC.
    At the top of the box it should say Adobe Acrobat Pro DC or Adobe Acrobat Standard DC.
    On each of the two machines, what does it say? (I think something odd has happened)

  • I have a iMac and i just updated the computer to Yosemite.  I have Photoshop CS5 and when I try to print under print size --- manage custom size , photoshop unexpectedly quits every time.  I updated the printer drivers (epson 9880)  uninstalled and instal

    I have a iMac and i just updated the computer to Yosemite.  I have Photoshop CS5 and when I try to print under print size --- manage custom size , photoshop unexpectedly quits every time.  I updated the printer drivers (epson 9880)  uninstalled and installed all the drivers. restarted computer and it is still doing the same thing.  Cant find any costumer service here either except forums.

    I have exactly the same problem - Whenever I go to Print, the print widow appears, it thinks about it for a bit (rotating symbol) and then quits.
    This is the beginning of the problem details, cut and paste. It goes on much longer than this:
    Process:               Adobe Photoshop CS5 [786]
    Path:                  /Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
    Identifier:            com.adobe.Photoshop
    Version:               12.0 (12.0x20100407.r.1103] [12.0)
    Code Type:             X86-64 (Native)
    Parent Process:        ??? [1]
    Responsible:           Adobe Photoshop CS5 [786]
    User ID:               502
    Date/Time:             2015-02-01 10:56:19.422 +0000
    OS Version:            Mac OS X 10.10.2 (14C109)
    Report Version:        11
    Anonymous UUID:        C0191A3D-714A-8117-8061-9291955759D1
    Sleep/Wake UUID:       B201F1B6-486D-4D70-B99A-E4F89B024BBF
    Time Awake Since Boot: 5600 seconds
    Time Since Wake:       240 seconds
    Crashed Thread:        0  Dispatch queue: com.apple.main-thread
    Exception Type:        EXC_BAD_ACCESS (SIGBUS)
    Exception Codes:       KERN_PROTECTION_FAILURE at 0x00007fff789d1e70
    VM Regions Near 0x7fff789d1e70:
        __DATA                 00007fff78986000-00007fff7898b000 [   20K] rw-/rwx SM=COW  /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.framework/Ve rsions/A/libLAPACK.dylib
    --> __DATA                 00007fff7898b000-00007fff789e1000 [  344K] rw-/rwx SM=COW  /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
        __DATA                 00007fff789e1000-00007fff789e6000 [   20K] rw-/rwx SM=COW  /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                           0x00007fff789d1e70 OBJC_CLASS_$_NSMutableArray + 0
    1   com.apple.print.framework.PrintCore 0x00007fff95693021 PMRelease + 43
    2   com.adobe.Photoshop           0x0000000100c237cf AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9727123
    3   com.adobe.Photoshop           0x0000000100c23e7d AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728833
    4   com.adobe.Photoshop           0x0000000100c23eb7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728891
    5   com.adobe.Photoshop           0x0000000100c23da5 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9728617
    6   com.adobe.Photoshop           0x0000000100aee053 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8459543
    7   com.adobe.Photoshop           0x0000000100768c64 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 4768040
    8   com.adobe.Photoshop           0x0000000100af067e AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8469314
    9   com.adobe.Photoshop           0x0000000100af0be9 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8470701
    10  com.adobe.Photoshop           0x0000000100af1295 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 8472409
    11  com.adobe.Photoshop           0x000000010007bbdc 0x100000000 + 506844
    12  com.adobe.Photoshop           0x00000001000d6a7e 0x100000000 + 879230
    13  com.adobe.Photoshop           0x00000001000d6a9e 0x100000000 + 879262
    14  com.adobe.Photoshop           0x0000000100066eb1 0x100000000 + 421553
    15  com.adobe.Photoshop           0x0000000100071d74 0x100000000 + 466292
    16  com.adobe.Photoshop           0x000000010006716f 0x100000000 + 422255
    17  com.adobe.Photoshop           0x0000000100067232 0x100000000 + 422450
    18  com.adobe.Photoshop           0x00000001012f0007 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16856267
    19  com.apple.AppKit               0x00007fff8d77c608 -[NSApplication run] + 711
    20  com.adobe.Photoshop           0x00000001012ee19c AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16848480
    21  com.adobe.Photoshop           0x00000001012ef3c7 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16853131
    22  com.adobe.Photoshop           0x0000000100068e82 0x100000000 + 429698
    23  com.adobe.Photoshop           0x0000000100238308 0x100000000 + 2327304
    24  com.adobe.Photoshop           0x00000001002383a7 0x100000000 + 2327463

  • Changing the print order for payroll checks and payroll deposit advices

    Hello,
    How do you change the print order of payroll checks and deposit advices?
    Thanks
    RW

    Hi there crazytalk,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Running Mavericks, when I try to print on my  HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. Worked fine with Mountain Lion.

    I'm running Mavericks and when I try to print on my networked HP LaserJet 1320tn I get the message  "Printing - The printer is in use." and nothing happens. The same set up works fine's with Mountain Lion. I am uptodate. Any thoughts?

    Hi,
    Thanks, but these suggestions aren't helping.
    I have
    1. tried to print form a different add
    2. deleted and reinstaled the printer
    3. deleted and reinstall the printer drivers
    4. reset the printing system
    there's no problem with the printer or the wireless as (1) i can print using my partner's mac with mountian lion and (2) I can see the printer on my own mac (mavericks)
    Any more suggestions?
    Thanks
    Laurie

  • Scan scan bar on the printer is continuously moving back and forth.

    The printer is connected via USB to a computer using Vista and also used remotely by a MAC, IPad, and IPhones. 
    The scan bar on the printer is continuously moving back and forth, I ran the HP Print Scan Doctor and it found no problem. 
    I can print, copy, and scan but the motion of this piece on the device will not stop. 
    No change to the issue occurred when I turned the printer off, waited several hours, and turned it back on. 

    Hi @GGx3,
    Welcome to the HP Forums!
    I noticed that the scan bar on your HP Officejet pro 6830 printer is continuously moving back and forth. I am happy to look into this scanning issue for you!
    First, I would recommend a hard reset, by going to this post, How to perform a Hard Reset, by @Rich1. it is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Please, see this article, Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector for more information. This applies to Inkjet printers as well.
    After the hard reset, I would go through this guide, The HP Printer Does Not Turn On or Respond When the Power Button is Pressed, and watch this video:
    (Even though the guide title may not match your issue, I believe the solutions will help.)
    The last step I would do is to also make sure your printer's firmware is up-to-date. Getting Printer Updates for HP Officejet 6810 and Officejet Pro 6830 e-All-in-One Printer Series.
    Hope this solves your problem, and have a good day!
    “Please click the Thumbs up icon below to give me a virtual high-five for responding.” 
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • When I bought my Mac they gave me a free hp printer. My mac is a 10.7 and the printer is for 10.6 and below.... so why did they give me this printer? Can I use it somehow or should I ask for a different one that is compatible with my computer?

    When I bought my Mac they gave me a free hp printer. My mac is a 10.7 and the printer is for 10.6 and below.... so why did they give me this printer? Can I use it somehow or should I ask for a different one that is compatible with my computer?

    Can I use it somehow or should I ask for a different one that is compatible with my computer?
    No, that's not necessary.
    You Mac most likely sat in inventory before it was sold so the latest drivers were not installed.
    If you tried using the printer and couldn'tget it to work, go here >  http://www8.hp.com/us/en/support-drivers.html
    If this is a USB connected printer, make sure it's connected to your Mac, then at that link click:  Detect Your Product
    Download and install drivers for v10.7 / Lion.

  • I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

    I created a multi-layered Photoshop file and the backgroud layer changed to gray and all other layers whacked out. I tried reopening it and restarting photoshop. What happened to my file?

    Your file is most likely toast, but still:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I changed the password on my iphone 3gs and I'm now locked out. What do I do?

    I changed the password on my iphone 3gs and now I'm locked out. Does anyone know how to retrieve the password? Thanks

    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808

  • HT4356 My iPad does not see my printer on the network.  The printer says it is connected and I can ping it from my pc, but the iPad does not seem to be able to find it.  I am going though an AOL supplied router, I have read this can cause issues, is this

    I am trying to print from my iPad to a HP 3520 printer using AirPrint. I have connected the printer to my local wireless network and it confirms it is connected. However my iPad can not find the printer on the network when it searches for it.  I am using an AOL supplied router and have read reports that this can cause problems.  Is this the case? How do I resolve this issue?

    Hi,
    That indeed can be caused by a router as Apple's AirPrint uses Bonjour to communicate with the device.
    Bonjour Services relies on IP Multicasting which have to be supported by your network.
    To isolate the problem, please follow the steps below to enable Wireless Direct and directly connect the iPad to your printer (which means without using the router).
    Once the iPad connected to the Wireless Direct network try printing and check for any difference.
    If the printer can be found via the temporary connection but not through your router that indicates lack of Multicast support or wrong configuration of your router.
    In such a case be sure to contact AOL and check if the router support Multicasting, if so ensure it is enabled within your router configuration, as well ensure it have the latest firmware installed..
    Shlomi

  • Hi, I have a problem with my Epson Stylus NX420. I had it connected and it worked fine but then all of a sudden it just stopped. It said it was offline, but it wasn't. So I tried to reinstall the printer, so i deleted it and clicked the   button to add

    Hi, I have a problem with my Epson Stylus NX420. I had it connected to my computer, and it worked fine. But I preformed a remodel and before the printer was connected to a windows desktop, and now it is not. I don't know if this could the be the cause of the problem. But I tried to print something and it showed me the printer as offline, but it wasn't. Thus to try to fix this, as I have done before I deleted the printer and tried to add it again. But as I went to add it, the printer was not there. I have searched the internet for an answer and I have found nothing. I do not understand why this has happened, nor how to fix it. Please help me.

    Because you had the printer connected to Windows, the print queue on your Mac was for this connection. With you moving the printer away from the Windows computer, the print queue on the Mac will no longer work and will show offline. So for the new connection of the printer you have to create a new print queue.
    Now the question is; how is the printer connected to the Mac. If it is connected by USB to the Mac then it should appear in the Default Add Printer view. If it is connected to the Mac via some other method, then could you reply with how it is connected.
    If it is connected to the Mac by USB then the most likely cause for the printer not appearing in the Default Add Printer view is thenUSB printer cable. So try disconnecting it and reconnecting it or even try another USB printer cable.

  • What's the printing difference in Acrobats 8 and 9 Pro?

    I have a PDF, actually I have seen quite a number, that when sent to one of our Canon printers--4080i or 2550--from Acrobat 8 Pro will not print. Nothing comes out. (Actually 1 the printer shows that it received one page--the document had more than one page--but it does not print that page out. We can set Print as Image in the advanced dialog and the document prints. The same document sent from Acrobat 9 Pro does print.
    Does Acrobat 9 have printing features that Acrobat 8 does not have? Will Acrobat 9 print the same document differently than Acrobat 8 will print it--Fonts, colors, resolution, etc.?
    If anyone is going to tell me to preflight the PDF, Thank You. If you do, please give me specifics as to what settings to use so that the PDF can be printed from any version of acrobat, 7 or higher, to any type of printer.

    No Answer yet.  This makes we wonder if anyone out there has had documents that will print in Acrobat pro 9, that will not print in acrobat pro 8. If so is there a reason? If all else is equal, XP, Printer Canon 4080i, Printer drivers, etc. And the only difference is Acrobat 8/9. Then it seems to me that there is some difference in the way the different version of Acrobat send PDF's to the printer. Am I correct?

  • Can you disable the print preview window from firefox and how?

    I would like to disable the print preview window and be able to click print once. I don't have the firefox symbol on the top left of the window. Can someone please give me the steps to change the settings?

    You can look at this extension:
    *Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/

  • 1022N PRINTER WHEN NETWORKING THE PRINT CYCLE REPEATS ITSELF OVER AND OVER UNTIL MANUAL INTERVENTI​ON

    THE PRINTER PRINTS THE COREECT INFORMATION EACH TIME BUT DOES NOT COME TO THE END OF THE PRINT COMMAND AND WILL CONTINUE TO PRINT THE SAME CORRECT INFO UNTIL OUT OF PAPER OR UNTIL MANUAL IFORMATION
    This question was solved.
    View Solution.

    Uncheck the "Enable bidirectional support" option in the port tab of 1022n properties. 
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

Maybe you are looking for